My S19 XP Stopped Mining.

[@erkkameskanen1405]

Right from the start before going to log at the time 3:00 mins from the start one can see that the Fan2 speed in 0. Pretty usual reason for the Antminer stop to mine.

[@bigguix]

then fans have so much CFM that they appear to be spinning even if they are dead because of the pull/push of the others. My s19 stopped hashing also, and a fan was dead. I had to unscrews them to really see that is was not turning. s19 will automatically stop hashing if a fan is dead

[@gabakusa]

i have a similar issue, but i will loose access directly and I have to power cycle it, any problem like that?

[@erkkameskanen1405]

Same brand fans (blue stripe) has been pain in the ass. The quality is bad. I lost this same brand fans like 30% of my miners last summer. All that went broke were just the same brand and no other brands.

[@ddk4664]

Check fan is plugged in properly , if not install a new fan , if not reset it

[@sp33dracerx2]

Nice, welcome to the club, your temp sensors are next.

[@redfoxrf2623]

I have a same issue but not the fan but the temp its says abnormal what can i do to fix it?

[@Dimitrios-x2y]

What’s a solid red light mean S 19 J and it seems like it keeps rebooting itself

[@miguelziobrowski3066]

Be honest please. Did you unplug a little bit of the fan cable, close the ASIC.. just to have content cuz there are no more ideas for content? Or it unplugged by itself?

[@miguelziobrowski3066]

I understand that in bear markets its harder for youtube crypto content creators, but 14 min for these type of content :/

[@burngraffer]

Would anyone know where to get rid of old mining machines in the states??

[@eastcoastasic]

What machines do you have for sale?

[@sausageslaps]

just because the fan is turning doesnt mean the miner can see it running, perhaps the encoder or other method it uses that tells it the fan is running has failed

[@slothsquatch5023]

Was going to offer you $20 for it lol. Glad you got it fixed and it was simple.

[@abe-danger]

i'll do 25$!

[@techheaven1252]

RPM same here. Once’s rebooted it starts mining ahaia Facing this issue form last 2/3 weeks after the Low power mode is out …

[@caramelcat4987]

I feel bad for your neighbors😂😂😂

[@jtravaglini]

I have heard of a bunch of issues coming about on the s19j pro XP. I have been running my s19j pro 104th and they have been great

[@TswiftCrypto]

fyi antminers dont support ssl like you have in your failover pool address

[@abe-danger]

Glad it was such a small issue, unlike what happend a while back when one of the hashboards broke on an L7 I think? it was one of yours atleast

[@renshooo]

That's awesome it was a simple little thing.

[@NUMB_808]

Which is best gpu under $400 for mining??

[@abdulazizcrypto4643]

CandomX Miner

[@dontsupportrats4089]

Those FE's are still some of the sharpest looking cards for blower cards.

[@thomasdriskill5254]

GPU 💎👐

[@TheMiningKiiNG]

Rigged… fan came unplugged really? Lol 😂

[@clickbaitmemore]

I immediately thought that too..🤫😁

[@RedPandaMining]

LMAO listen! i wouldnt have ran it for 2 days like that would I!!

[@yousefqasem53]

Bro why fan 6000 its must be 3000

[@NUMB_808]

Hi bro

[@GeekOfAllTrades]

re-seat all the things. great job bob the builder lol 🖖

[@yvonnadeau2331]

Morning RPM, my fan plugs on the control boards are Super Tight in there.. yours look loose big time. I would probably rip the wires out if i where to pull it the way you did there. Seems like you have to tighten the grip on that connector.

[@gillesdiode8234]

Belle simulation 👍🏻

[@DMinerzChannel]

Wow...mine away!

[@gandolfgrey5385]

Bro I am so glad I didn't get these asics nothing but problems. My whatsminer has been rock sold. Higher efficiency? Well its super efficient if it doesn't draw power because it continuously had a fault

[@henryofozor1602]

Whatsminer Is better?

[@rondy87]

🔥🔥🔥

[@NUMB_808]

Love you bro ❤️💛💚💙🧡💜

[@fullyelectric]

RPM you give it away lol Mar 2nd as of this recoding lol when you go on vacation post videos that don’t have any date info. In it lol 😂 hope you and family get back home safe..nice content 👍

[@TheTravelersTravels]

Congrats on an easy fix!

[@bestyoutube5318]

Fan ?

[@td1938]

Red Panda got those p106-100 cards will make you a good trade did you get my email?