My iPollo ETH V1 Mini doesn't mine anymore...

[@SebsFinTechChannel]

Hey at least it's still pretty! LOL jokes aside I think like you say only thing left to do is send it off to get it repaired. Would be very interesting to see a follow up video on how that goes :)

[@dmining65]

IPollos after support is actually great! They replaced a SE I didn’t even buy direct from Them!

[@Hoplophile1]

Factory reset? Unplug and leave it off for an hour or so and then try again?

[@HoboJoeShow]

Have you tried running it with the ethernet cable plugged directly in? Maybe it's a bad wifi

[@WiskiJZ]

You have to reinstall the OS image, config was lost at some point in one of the image upgrades you did.

[@jojomojojc]

I had the same issue. I have reset the miner, updated the firmware and reset physically on the miner. Working like a clock now. Oh and don't forget to unplug it after factory reset

[@Yankee1776]

I have a tool to fix it 🦅

[@slothsquatch5023]

🔨⚒🔨⚒🤯

[@MC...]

🦅 pew pew!!

[@chrismabie9509]

Mine was doing the exact same thing. I reset to factory defaults and then unplugged overnight. Worked the next day when I plugged in.

[@leolustig8994]

Just had to RMA an Ipollo. Boy did I have to jump through hoops for them before they would let me send it back. It is brand new and did not work out of the box. Good luck RPM!

[@dan6779]

I'm thinking of getting into fixing out of warranty ASICS. These all look like very simple electronics and I work on aircraft computers all day.

[@tronki8508]

I have the same issue with a v1 mini se plus i tried diff filmwares and nothibg i dont know what to do to fix it...

[@slothsquatch5023]

Had an issue recently when I tried to change pools on my v1 classic mini, eventually I just left it unplugged for 30 minutes and it started working fine again once plugged in.

[@Kimstatus]

how can you change the fan with out taking it apart?

[@jminnee]

Same issue for me. I updated the firmware. Then did a reset with the button on the iPollo box. After implementing the correct mining pool, a pool where it is possible to mine ETC and ZIL!!) it started mining again. Be patient there. I took about five minutes before the hashrate showed up on the in the iPollo website. It mines for a few hours and then it 'magically' stops mining. When it is fully disconnected and rebooted an hour later, it is running for some hours and then the same thing happens again. Finally: I have replaced the power source with a new stabilized 12v power source. That did the trick. Somehow the original power source spikes causing the iPollo to lose connection to the pool and not reconnecting again.

[@Revenue-Stream]

I was having problems with my v1 mini se plus on k1pool. It took like an hour to start working.

[@noel.johnathan5798]

Does a unit like this still currently mine? i'm new to crypto and seem like these units are fairly cheap. not looking for anything massive just a little one to start off with

[@nochance1017]

I had 1 of my ipollo v1 mini SE Plus go bad, was acting similar to yours but it actually only mined at half hashrate, after having it about 3 months. I sent it in for RMA took about 2 weeks but came back and they had replaced one of the hashboards and that fixed it. The SE plus 400mh/s model has 2 hashboards, but I also have the Gold 300mh/s model like you and it only has 1 hashboard, which is why you get 0 mh/s. I would imagine that is what is goin on with yours, getting getworks but no shares.

[@Chapouto50]

I'm having the same problem with my V1 classic mini, it stopped after updating the firmware, it's only doing half the hashrate, but mine has been out of warranty for a long time

[@ruudje1982]

How do you set it up ? On the ipollo site there say that you put it wrong . The bottom you use is not the bottom . It’s the site .

[@Senyorbs]

What is solar cloud farm mining all about?

[@fernandofernandes5797]

hi there... did you manage to put your miner back on mining? got 1 unit just is like your.... wont mine... no mather what i try :(

[@Shambhalla67]

Did I get any solution? I have the same problem!

[@forgetb]

This may sound stupid, but I had same issue with one of these and it took fully unplugging and replugging in. I tried going back in firmware, forward and all had same issue. This ONLY occurred after changing to alternate pools. Possibly not clearing the ram is my assumption, but what ever it is, it was the only thing that started it mining again. I have not had issue with it since, but I have as well not changed pools.

[@79mikemc]

i noticed when you tried upgrading to new firmware you kept old settings maybe reinstall and uncheck that option and see if it changes anything

[@harrisonzayn7858]

These past few days watching my portfolio decline is very disheartening. Holding doesn't really profit much, any idea how on how to earn better on the short run?

[@GeekOfAllTrades]

Looks like target practice to me!! 💥💥

[@kanmts1995]

is it my idea RPM or a lot of asics start to crumple and not even work for one year? it will be nice to put one video with which asics are reliable or not...

[@Revenue-Stream]

Hi redpanda and ty for all the useful info. I like watching your videos. I have recently got into mining because i kick myself in the but Everytime i think back when btc was first being mined and wanted to get into it but never did. But hey that's life right? So last month i bought ipollo v1 mini se plus. Sometimes on k1pool ZIL will be highlighted red? No hashing on ZIL but ETC is fine? Any help whatsoever from anyone would be appreciated very much...

[@pcman02]

Same problem as me.

[@leakandlostinformation]

I have one and I fix it just by updating to new firmware

[@miketheminer]

@Red Panda Mining , I have fixed several ASICs that don't hash by just taking it all the way apart and unplug then replug any connectors.

[@andrewmartino6144]

Have you tried turning it off and turning back on after 10 minutes? lol

[@floridastacker]

I've got 2 of the SE Plus and 2 of the SEs. Interested to see if iPollo will RMA

[@abdulazizcakr]

We can’t I mine with solar cloud farm mining in Syria, I am really pissed.

[@AlteredComponent]

Love you RP!

[@derkalt-ne-lox]

try to Diagnostics menu

[@DiegoaufTour]

Hi my friend, try the original power supply.

[@deprall]

Mint. Not normal mint... ChumpChangeXD Mint.

[@mg1521adm]

WLAN IP null doesn't seems correct

[@dhellis19498]

He is running on Ethernet not WiFi so no need for an IP address for WiFi

[@BlowUpDaChr0n]

change your power cables

[@christianjohansen2349]

downgrade fw, the hashboard does not show up in the new firmware , try going lower then 78.106

[@sadecemut]

How many people is mining with solar cloud farm mining?

[@MinedCapital]

Maybe try resetting it to factory firmware? Not sure that will do anything. Otherwise, you probably got it free for review so just do a video of opening it up and see if you can see any visible damage. Would make for an interesting video!

[@_lordvoldemort_]

Do a factory reset

[@ailesi-sj4hj]

Please can you tell us how to set up our account on solar cloud farm mining

[@mikehill9888]

Thanks for the video

[@jonathanriveron3297]

Return it to chump change and get your money back

[@atw9913]

Magnuson-Moss Warranty Act. Those stickers mean nothing. Legally they cannot deny a warranty because you removed the cover. In reality you will have to spend well more than what the product is worth to fight them.

[@ChikoDredd]

For the algorithm 💪 and your lungs 😘

[@samybarakat-ln1in]

Password needs to be 123

[@seadismanovski1649]

Hi Red Panda......Try with the original power supply 12V / 30A.Factory reset with a much older FW , set the default mining IPOLLO pool config (dont change anything) , and definetly LAN cable to onother network as a last solution ....I hope u will fix it ,Good luck!

[@mrshorts456]

Who else is watching this and making so much profit with solar cloud farm mining

[@stephencicero]

just send it to me after its fixed..lol

[@dougiee6589]

Use the diags and logs to squeeze more life out of it LOL

[@herimaccoy6018]

Sent me

[@interiordesigner-]

wow

[@CDRBAZ-Miner]

Isn't it great when they don't work, I've been trying to get one of these for long time. More then happy to take this off your hands 🫠. Keep up the great videos.