My Steam Deck is Now Complete

  Рет қаралды 215,604

Taki Udon

Taki Udon

Күн бұрын

Пікірлер: 537
@TakiUdon
@TakiUdon Жыл бұрын
Amazon Store: amzn.to/3Pi7Q8s AliExpress Store: s.click.aliexpress.com/e/_DCgN1Gv If there's enough interest, I'll edit the build into a tutorial.
@Pvnkakke
@Pvnkakke Жыл бұрын
Plz I need tutorial with your magic hands
@TheHighrailer
@TheHighrailer Жыл бұрын
~ + = i n t e r e s t = + ~
@dethbyneckbeard2435
@dethbyneckbeard2435 Жыл бұрын
I would also love to see this process.
@timeTegus
@timeTegus Жыл бұрын
yess
@pationdex
@pationdex Жыл бұрын
we need a tutorial :)
@pfunk5001
@pfunk5001 Жыл бұрын
me: ---watches video--- me: --deletes shell from cart--
@lax9586
@lax9586 Жыл бұрын
Props to Taki for going through with a whole steam deck shell replacement. I have taken apart/put back together a fair bit of tech and trying to decipher what steps use which screws if there is conflicting information can be a nightmare.
@gameoverguy7223
@gameoverguy7223 Жыл бұрын
Then buy a better system like ROG ally steam deck is not great. I own both a Rog ally and steam deck
@Fancy405
@Fancy405 Жыл бұрын
@@gameoverguy7223 woah a $400 system isnt as good as a $700 counterpart i wouldve never though please tell me more about this revolutionary discovery
@Sapient_Pearwood
@Sapient_Pearwood Жыл бұрын
​@@gameoverguy7223or just wait a little bit longer until the DeckHD screens are released and just replace your screen with a better screen than what the Ally has for still significantly cheaper.
@escapetherace1943
@escapetherace1943 Жыл бұрын
bro use a magnetic plate or pad and set everything right-to-left or left-to-right as you take it apart, take photos w/ smartphone, look at photos when you forget certain steps. that's what I did and I've been able to tear down and reassemble most laptops now without problems
@dandiaz19934
@dandiaz19934 Жыл бұрын
I think it would look sexier with the stock buttons and trackpads, but das just my preference. Thanks so much for giving us your honest thoughts. I am definitely not brave enough yet to do this. But mad admiration for those who do it.
@PANCHO15108
@PANCHO15108 Жыл бұрын
I'm with you man. If I do it I will do the Dark transparent with the Stovk Buttons and Track pad.
@leonardomanes6713
@leonardomanes6713 Жыл бұрын
Agreed. Not worth the work, risk and final looks.
@thomasdoidge2489
@thomasdoidge2489 Жыл бұрын
The Gameboy Color and Advance that this is supposed to be a reminder of had stock buttons, triggers etc. Looks much better in my opinion
@zekezander
@zekezander Жыл бұрын
I agree. I think the stock buttons and track pads would be a nice contrast to the clear purple. and I wouldn;t wanna mess with taking apart the pads.
@skateecho
@skateecho Жыл бұрын
i was just thinking that. plus a bit easier and safer with those poor track pads!
@TheXipherZero
@TheXipherZero Жыл бұрын
This solidifies that I will probably *NEVER* do a front shell replacement on my decks 😆! Thanks for taking the risk and sharing your experience.
@GloopedoutYoinker
@GloopedoutYoinker Жыл бұрын
I was legit holding my breath so much throughout this whole video. I was actually close to buying this product but honestly this has shown that I probably couldn't do this myself.
@mart182003
@mart182003 Жыл бұрын
Don’t be a wuss lol
@luiscazares6408
@luiscazares6408 7 ай бұрын
Yeah, my Switch OLED was hard enough, I don't have the patience to do all of this 😂
@ZZZ-Hip-Hop
@ZZZ-Hip-Hop 3 ай бұрын
Steam support should offer the shell swap as a service. Knowing myself I'd probably swap mine every 6 months or so
@hsienkossuperdynamicmegato9900
@hsienkossuperdynamicmegato9900 Жыл бұрын
That right trackpad aesthetic would immediately make me take apart the Steam Deck just to redo that area. And yeah, the bad thing about transparent shells are the blemishes that can show up if you screw in a screw too tight. I’ve seen my fair share of them when replacing Nintendo Switch joycons and the backplate.
@NightFyreTV
@NightFyreTV Жыл бұрын
problem with extremrate shells is that you're not gonna have a good time closing it a second time.
@bpatplus
@bpatplus Жыл бұрын
Any recommendations on how to avoid? I'm working on my Steam Deck shell swap now and I'm getting all kinds of little cracks and fissures in the plastic. I don't feel like I'm overtightening or being forceful, so any tips you have would be great!
@KingCez100
@KingCez100 Жыл бұрын
Wow, I just gained so much appreciation for my stock SteamDeck.
@jar768jake
@jar768jake Жыл бұрын
Just got done putting a clear transparent shell on my steam deck, from extremerate, it went very well, I’m very happy with the end product. A few notes: -Extremerate did supply many of their own screws, I literally used none of them, I was able to just reuse all screws from the original steam deck shell - I did move forward with removing the shell part of the trackpad to replace it with the transparent one, it went well however I wasn’t happy with just the fact that it was just mostly black, so I actually took it back apart, put a vinyl sticker of what the underside of the trackpad looks like, and then replaced the shell, and I can confirm that, although the vinyl is only adhesive on one side, it’s still held together by the plastic clips, and it does not keep my trackpad from working 100% effectively, so I can confirm that you can put a thin layer of something else between the trackpad and the shell, that isn’t the adhesive pad, and it can still work just fine. More importantly instead of just black squares, it looks like actual components under the track pad, even if it is just a sticker, it fits the rest of the look way better. -I don’t know if this has anything to do with me reusing the original screws, but I found that if you tighten the screws all the way down on the rear cover of the steam deck, pressing firmly on the front of the deck where the steam button and the quick access button are will actually cause the rear button to activate, so I did have to leave the screws slightly less tightened on the back, but as long as you’re not flinging your steam deck around the plastic clips do a pretty good job holding it together. - and this last note is just a fun one, I was actually able to find transparent joysticks from the same company, they only sold them for PS5 controllers from what I could find, but it works great for steam deck, however the only caveat is that you have to leave the screws slightly loose on the back of the joystick board, or just put some spacers between the board and the shell, because if you tighten them all the way down, I found that the joystick cover will scrape on the underside of the shell, but even if they’re a little loose they work just fine.
@kahvikone
@kahvikone Жыл бұрын
It's cool to see these shell mods. I definitely won't be bothering to do one because of the effort involved.
@Sapient_Pearwood
@Sapient_Pearwood Жыл бұрын
Yeah, I can't justify doing a full shell swap either. The only time I think I could justify it would be when the DeckHD screens release but even then idk. I really like my Jsaux back with the extra cooling area and would rather keep it and just have them release a front that matches their backs.
@MeruXYZ
@MeruXYZ Жыл бұрын
Definitely gonna go with the white and keep the original buttons. The case itself looks fantastic, but I need those OEM buttons.
@JO-hs1ue
@JO-hs1ue Жыл бұрын
yup, OEm buttons and trackpad would make it look cleaner
@sunrainsky5617
@sunrainsky5617 Жыл бұрын
Well, there are white cases you can put over your deck without disassembly so the white casing with black buttons look is already kinda available. If I want to do a disassmebly, I would change everything to white. But that's just me.
@l-Jeremy
@l-Jeremy Жыл бұрын
You outdid yourself in some respects, but this quality is what you're known for, Taki. This is extremely helpful for breakdown to help save others time and frustration. You showcase a new product without having to flex your muscles vigorously. You add the right retro touch with more than enough angle shots at the end with Donkey Kong Country! I greatly appreciate your work, and the purple atomic shell looks perfect! Excellent work on teardown, too; not easy, and it's risky.
@synak1538
@synak1538 Жыл бұрын
Looks great Taki! Appreciate the extra effort on getting another Deck to test the Extreme Case 😁
@r0an3v3
@r0an3v3 Жыл бұрын
this was very insightful and has tremendously helped me with my decision to re-case my Deck. Now I just need to wait for oem replacement shells that have better cooling plates attached at the back!
@GuyManley
@GuyManley Жыл бұрын
I've had good experience using extreme rate gbc shells. Good to see their quality doesn't drop when the product class scales up.
@leonc4653
@leonc4653 Жыл бұрын
given their switch shells (i have one) yeah no doubt
@ButtholioTheGreat
@ButtholioTheGreat Жыл бұрын
if replacement shells were sold with a pre applied OLED display with VRR, I would be all in.
@Ruslan.88266
@Ruslan.88266 Жыл бұрын
There are screws behind the screen that hold in the frame.
@NefariousRake
@NefariousRake Жыл бұрын
the screen is adhered to the metal frame and not the shell. the shell is screwed to the frame with an overlap under the screen. This will not be my first shell swap ive done switches and custom gameboy sp's. my recommendation for anyone looking at this mod with no prior experience is to buy a replacement screen so if you do mess up its not the end of the world.
@corgisaregood
@corgisaregood Жыл бұрын
I've gotta mail mine back for RMA from NZ and pay shipping both ways, which amounts to about another $160 USD equivalent in costs. No way I'd ever consider a mod like this when so much can go wrong, but I'm very jealous of how it looks. When Valve inevitably release their successor, some colour options would be much, much appreciated.
@mrsittingmongoose
@mrsittingmongoose Жыл бұрын
Clear shells are coming back in style, I really hope we see some different color ways on deck 2. Though I wouldn’t be surprised if they didn’t.
@gameoverguy7223
@gameoverguy7223 Жыл бұрын
If anybody is watching this video do not buy one.... Valve has told you that things could go wrong and you're going to be spending more money in the end if something does go wrong..
@gameoverguy7223
@gameoverguy7223 Жыл бұрын
​@@mrsittingmongooseif there is a steam deck 2
@Invid72
@Invid72 Жыл бұрын
Looks good. I think it might look better with the stock black buttons on the translucent shell but that's me. I don't like the look of the clear buttons myself.
@skycloud4802
@skycloud4802 Жыл бұрын
Basic black shell looks fine to me, pretty sleek. I find the trouble with custom shells is that they can make a device look a bit tacky or toylike. Fine enough for a cheap small Chinese handheld, but doesn't really suit something as expensive as premium as the Steam Deck.
@amirpourghoureiyan1637
@amirpourghoureiyan1637 Жыл бұрын
I'd keep the original front buttons and the stock trackpads tbh, I prefer the two-tone look with transparent mods
@lotzosushi
@lotzosushi Жыл бұрын
After swapping out my Switch + Switch lite shells with Extremerate kits, I'm looking forward to doing this to my Steam Deck too! I personally would probably keep the stock black buttons/trackpad with the clear housing, I did that with the Switch and it looks great. Also gonna swap out the joysticks with the hall sensing ones too.
@AdamKueflef
@AdamKueflef Жыл бұрын
Hall sticks are worth the money especially since you can get them for less then stock replacments
@lotzosushi
@lotzosushi Жыл бұрын
@@AdamKueflef Yes! I ordered them waiting for it to arrive. I swapped out the ones on my Switch Joycons and they've been amazing since.
@pinkakagreen
@pinkakagreen Жыл бұрын
I really enjoyed this video. Thanks. I'm too inexperienced to actually do this. But yours is amazing
@LooselyRigorous
@LooselyRigorous Жыл бұрын
11:36 Rock and Stone brother!!!
@JessicaFEREM
@JessicaFEREM Жыл бұрын
Extreme rate has been my favorite shell maker brand. Always super high quality and relatively cheap
@CrushedParagon
@CrushedParagon Жыл бұрын
I did this myself but used the original buttons/trackpads and I prefer the look over a fully atomic purple build, all down to preference obviously. My tips: -Ignore the metal pick, I just used a plastic guitar pick and did not damage the border at all. Tbh ignore all the tools that you already have, I used their suction tool and it sucks major ass. -Be sure you plug in the battery cable *all* the way in at the end. I spent like a half hour troubleshooting why no battery indicator showed up after putting it back together
@dope93x
@dope93x Жыл бұрын
A full tutorial would be extremely helpful. Great video!
@nerdloftgaming
@nerdloftgaming Жыл бұрын
A job well done, Taki. Excellent overview on the aftermarket buttons, and what happens if you opt out of the new adhesive for the trackpads. While I don’t see myself having issues with attempting this myself (I’ve reshelled consoles and my old Game Boys), I may pass on this. While it looks cool, I’ll save myself the headache, haha. One thing I recommend is getting a matte screen protector. I can’t stand my handhelds not having one, all my devices have one installed (Miyoo mini and Plus, the 405M, Nintendo Switch, etc) and they just look better with it. All said, excellent video, hopefully you go through with the tear down tutorial to help remove unnecessary steps they’ve included. Happy gaming!
@n3k0lai
@n3k0lai Жыл бұрын
incredibly helpful video. i have been eyeing this kit since i just got a steamdeck. i have done extremerate shell transfers on game controllers before but doing the screen seems a tad scary. maybe ill wait to do this when an aftermarket screen option becomes popular
@seriosbrad
@seriosbrad Жыл бұрын
I did this shell swap a couple days ago and remembered some of your tips from this video. I threw out the metal pick immediately. The suction cup worked OK for me with some heat applied, but without heat, definitely use a better suction cup. If you watch the eXtremeRate tutorial and pause at their screen removal, they seriously botched their own screen with their metal pick, it looks soo bad, scratches EVERYWHERE. Very bad example for their own tutorial. I ended up using the JSAUX purple backplate which snapped into the eXtremeRate purple front shell perfectly, the colours are also identical between the two brands. I also used all the stock black Steam Deck buttons.
@chaymber_crafts
@chaymber_crafts Ай бұрын
About the gap, you can 3d print a veneer to fill in the gaps and it looks actually nice. I have look into it when I start my clear blue/purple shell swap.
@haroldcampos9661
@haroldcampos9661 Жыл бұрын
I did it. Thanks for the tips actually. Your screen looks fine but never go metal on glass, etc. Used the original trackpads, Jsaux's video and written instructions. A lot of ziplocks and the original screws. I ding'ed thru the paint on the screen with my tweezers cleaning adhesive once, but used my nail to remove the rest. I also put big purple marshmallow thumbstick grips and it looks and plays fine. The old jsaux black n purple shell looks cool but this looks like a purple ice sculpture... feels as good quality or better than stock. The seams and texture are very clean!! I just wanted a clear front but the entire shell is quite nice. No defects on mine! Excellent mod. Recommend. If you finally figure out the pry tool on the shell,, that's like the a-ha moment.
@kbhasi
@kbhasi Жыл бұрын
(0:49) Thank you!! The Steam Deck isn't officially sold in Singapore, and the only way I could get one were through scalpers who mark up their prices to be much higher than the official UK prices but for consoles coming with US power adaptors! To add to that, there's one company who used multiple Carousell accounts and one common thing would be that they would list the instalment price as the full price on the listing as part of their tactics. I felt like creating a separate Carousell account in order to troll them and get their accounts suspended, but convinced myself not to. That website you showed looked like Taobao to me, and Lazada over here have a built-in Taobao proxy service. I could take a look at that.
@hatchxable
@hatchxable Жыл бұрын
I was able to do some DIY repairs on my steam deck for the bumpers buttons and board controllers by using just one a Phillips PH0 or PH1, I don't remember which one exactly, but it didn't strip the screws. I just made sure that it doesn't have too much play while screwing in or out as it might strip the screws. I did notice that some PH1 screws are actually wider than others. One didn't reach the screws of the outer case because it was too wide, I had to use another one from a different kit even though it was the same Philips code.
@mrp1zz492
@mrp1zz492 7 ай бұрын
The only change I'll do is a button change. I love how the shell feels. I want good buttons tho
@chrom4ful
@chrom4ful Жыл бұрын
Damn that looks awesome I'm really tempted to do this on my deck
@toxicgamer4123
@toxicgamer4123 Жыл бұрын
Taki you should make a video covering the recent news regarding the Aya neo 2, a lot of owners are sharing stories and pictures of their devices cracking on the plastic of the shell itself, has your unit that you covered started cracking ? Figured it would be a super interesting video discussion also customer support is refusing customers RMA’s or any replacements, as well bribing customers into removing their Reddit post sharing quality control issues by offering them free travel bags or screen protectors
@Wildlander
@Wildlander Жыл бұрын
You and your videos are a treasure Taki. Thank you for sharing!
@ARG
@ARG Жыл бұрын
Looking forward to doing my review on this shell, looks so good in atomic purple.
@nickwort123
@nickwort123 Жыл бұрын
I’ve had really good luck with extreme rate stuff, but you’re totally right - their included tools are terrible. They make a really nice atomic purple though
@matthewcienki8064
@matthewcienki8064 Жыл бұрын
Good choice of Donkey Kong Country water level music for showing off your Steam Deck success!
@Ameribear
@Ameribear Жыл бұрын
It would SUPER helpful if you were to make your own improved tutorial on the shell swap Taki!
@rubyterpball3817
@rubyterpball3817 Жыл бұрын
The shell replacement takes about 3 hours
@xtalviper
@xtalviper Жыл бұрын
Yeah... Between my laziness and the possibility of messing something up throughout taking it completely apart and putting it back together again (not to mention how easy it is to damage the screen), I'm fine with the original front shell...
@jimdoom2276
@jimdoom2276 Жыл бұрын
Yeah my main thought watching this, was why the hell would anyone go through all that just for a different colour? Seems crazy to me. Imagine how bad you're gonna feel when you're trying to get that screen off and you suddenly hear a crack. Smh.
@1st-1ast
@1st-1ast Жыл бұрын
This video helped me make decision not to re-shell at moment till I have free afternoon, thank you
@ChocolateAsian9000
@ChocolateAsian9000 Жыл бұрын
Just finished doing mine to transparent black. Honestly not that difficult, it’s follow directions. Totally worth it Edit: use old credit cards to pry the screen off. The suction cup does suck, but with proper heat application you can do it
@MarioGoatse
@MarioGoatse Жыл бұрын
Such a nostalgic colour! I absolutely love it.
@yamipizza8357
@yamipizza8357 Жыл бұрын
I was thinking about doing this but after seeing your video, hell no. I didn't realize it would be so in depth on taking it apart.
@halofan07
@halofan07 Жыл бұрын
thank you for your video, i just ordered my steam deck (darn you summer sale!!) because of this video ill probably get a clear back panel mod, but for the front ill grab a dbrand teardown skin
@XionSteel
@XionSteel Жыл бұрын
Seems like the best thing you can do if you were planning on changing out the screen anyways with a non reflective on that you can get from ifixit. Dont need to worry about suction cups and heat guns that way.
@masamasa1815
@masamasa1815 Жыл бұрын
I have done a ton and I mean a ton of these shell swaps especially on the switch lite and I've used extream rate products a bunch. I will say their quality can be a bit poor and you have to be really careful with the transparent shells, you have to make sure to leave every screw a quarter turn loose especially when screwing the two halves together, the first couple of times I did a shell swaps with these I woke up to find the shell cracked. Trust me it doesn't take much with these shells! A small drop or even a really cold day can cause these shells to get a crack in it and once they start they just get worse with time.
@bpatplus
@bpatplus Жыл бұрын
I'm half way through my shell swap and I'm finding all kinds of cracks and fissures. Any other recommendations on how to avoid causing these little imperferfections?
@masamasa1815
@masamasa1815 Жыл бұрын
@@bpatplus Make sure you use the screws that come with it rather than the steam deck screws they are slightly different. Don't ratchet the screws down like you see in the video, once you feel resistance stop. Also make sure you really clean the old glue off the screen, just the big chunks, otherwise your screen is going to stick out. I actually did one of these myself yesterday and I'm happy to say they seem to be better quality they the switch lite shells.
@bpatplus
@bpatplus Жыл бұрын
@masamasa1815 Thanks for the feedback! I was using the "kit" screws that came with it, and I didn't think I was tightening too much, but I ordered another kit and I'm going to be MUCH more gentle with this one. So fingers crossed it goes well!
@woz9uk
@woz9uk Жыл бұрын
Great video and one I wish I had watched before I installed my case; I agree that the Extremerate tutorial goes too far during disassembly, for me, the right trackpad power wires came out of the tiny plug, so word of warning for others, either take more time removing it using the plug, or leave it connected to the DB! I seem to have lost rumble on that trackpad now, even though I have reconnected the wires. Liked the to the point nature of the vid, good work mate!
@OkraPlutonium
@OkraPlutonium Жыл бұрын
Ooooh yeah that scratches the itch, Taki! Can't wait to see how the Jsaux version is.
@PeasantPlayer
@PeasantPlayer Жыл бұрын
I love the “Atomic Purple” shell you picked!
@shadowtheimpure
@shadowtheimpure Жыл бұрын
I won't be doing one of these, but they are going to be releasing button kits so I'll probably do that when they come out. Swap out the stock glossy buttons for matte black buttons.
@Scriven42
@Scriven42 Жыл бұрын
Every single Atomic Purple reminds me of my OG Gameboy Colour. Gotta replace that thing... ... OH damn, buttons too! ... That is an extremely pretty Steam Deck!
@burger-enjoyer
@burger-enjoyer Жыл бұрын
I think you should have kept original black buttons. Would look nice with transparent case.
@surrealchemist
@surrealchemist Жыл бұрын
I think I saw a video where they took a hobby knife to the OEM buttons and the markings went through the button so they aren't just screen printed where they will wear off eventually.
@steventechno
@steventechno Жыл бұрын
If I were to do this to my unit personally, I'd take the lazy route, and spend a little more on an extra display and just slap a brand new one in the new shell, and keep the original around untouched as a backup!
@maxamillion2k7
@maxamillion2k7 Жыл бұрын
Taki Udon it would be wise to invest in a iFixit kit they have the best screen suction puller....I have the kit and when it comes to fixing electronics it is a life saver.
@TakiUdon
@TakiUdon Жыл бұрын
This is the way.
@bland9876
@bland9876 Жыл бұрын
I'm hoping that while he's got it apart he does a screen swap to the higher resolution screen just so that we can get a look at that.
@schlittytube
@schlittytube Жыл бұрын
Thanks for the thorough look and insights.
@IuseanXboxController
@IuseanXboxController Жыл бұрын
Transparent with white buttons is the way to go like that PSP. That's how I have my atomic purple switch. Always looks clean af. White thumbsticks also on the joycons.
@nekrosfear
@nekrosfear Жыл бұрын
I think I'm going for the JSAUX Atomic Purple because it's a deeper purple than the ExtremeRate Atomic Purple..also I already have the JSAUX backplate in Atomic Purple but still Atomic Purple FTW!!! ⚛️
@Froezone
@Froezone Жыл бұрын
extremerate is a good company that works and doesn’t feel cheap, only company i’ll go to for these kinda things
@Srolocs
@Srolocs Жыл бұрын
I got the white one and I'm waiting for it to be delivered. I ordered a couple tools from ifixit because I know they are quality. Thanks so much for making this so I'm not left scratching my head! I have also done Joycon shell swaps from the same company so I know what to expect.
@Shaundi1-l4e
@Shaundi1-l4e Жыл бұрын
I installed mine and also ordered iFixit tools, definetly 100x times better than extremrates tools
@AdnanCucak
@AdnanCucak Жыл бұрын
Lovely to see where the decks are going, cant even get one myself but these people have WALLS of them.
@yesterdaysjam2405
@yesterdaysjam2405 Жыл бұрын
This is one of those mods that I'd really want on my deck but one that I'll probably pay a tech to do it for me. JSAUX apparently has a bundle that includes an anti glare screen so that might be interesting.
@mamaharumi
@mamaharumi Жыл бұрын
So good. I'll be replacing my shell if I ever get a second one. Don't want to mess up my perfectly my good Q2 deck. I really want an all-white.
@thorodinson7739
@thorodinson7739 Жыл бұрын
thx for the vid, i have the same shell on my desk. after i see it here, i will stay for the stock buttons instead of the clear ones.
@Day100
@Day100 Жыл бұрын
I am half tempted to buy this, colored buttons, and commission two thumbsticks for that GC feel.
@tonyh2596
@tonyh2596 Жыл бұрын
Maybe it would like good with the original buttons or grey ones. It just looks super cheap now, but I know people will probably like it. Thank you for making this, it's a hard pass for me after seeing the results.
@leorelic
@leorelic Жыл бұрын
i agree , i think the new shell is great but the new buttons are an abomination
@peterrusso7336
@peterrusso7336 Жыл бұрын
1:15 that Mercedes is like 200 grand. It’s called a maybach gls600 if you want to look into it
@ulissesjunior5280
@ulissesjunior5280 Жыл бұрын
I'm gonna go with jsaux. I feel like extremerate cut a lot of corners on this. Great video though! Very informative
@mrburnz884
@mrburnz884 Жыл бұрын
Jokes on you. I still can't get a Steam deck officially in Australia either! 😢
@Cissonius
@Cissonius Жыл бұрын
Prison gonna have a whole new meta now
@karljakober
@karljakober Жыл бұрын
i had the exact same issue with screws. it was multiplied by the fact that the screw holder had exploded in the packagaing and they were everywhere. nonetheless i took my time and now I have a nice jsaux atomic purple deck. wish i got the buttons from extreme tho
@TarisRedwing
@TarisRedwing Жыл бұрын
I am now 1000% jelly you have an atomic purple clear Steam Deck 🤯
@bland9876
@bland9876 Жыл бұрын
The trackpad on the right looks all messed up versus the left one other than that it looks solid.
@TakiUdon
@TakiUdon Жыл бұрын
I did that on purpose to show the difference between applying a second adhesive strip, or reusing the existing one.
@bland9876
@bland9876 Жыл бұрын
@@TakiUdon if I'm hearing that right you said the one that didn't have the extra strip was the one that looks all messed up and I thought that was weird for some reason but now I'm not sure.
@niqgal3356
@niqgal3356 Жыл бұрын
14:10 --- I have a gap similar to that on my JSAUX backplate. I didn't realize the screen and such had to be replaced with this mod...poo -- that all looks way too complicated for me.
@TheExFatal
@TheExFatal Жыл бұрын
I never really got the appeal of clean shells, imagine if your skin was transparent, that's horrifying
@amit_patel654
@amit_patel654 Жыл бұрын
Lol same here. I like to think that the stock shells sort of "hide" the magic of the tech
@skycloud4802
@skycloud4802 Жыл бұрын
I think transparent plastic may be more of a nostalgic remnant of people's childhood, a retro craze thing that died but people are still fond of (kind of like the colour atomic purple really). I knew people in the mid 90's and early 2000's that really got into transparent everything. Transparent watches, transparent radios, transparent games consoles and so on. I think even Nintendo sold transparent Gameboy's at one point, my friend had one. And somebody had this original frosted Xbox, so official companies were going on in.
@keonxd8918
@keonxd8918 Жыл бұрын
Transparent tech makes me appreciate the device more
@amit_patel654
@amit_patel654 Жыл бұрын
@@skycloud4802 That's definitely it. I remember some of my friends having the atomic purple Gameboy color back in the 90s. I still think it's cool for smaller devices, but I don't think it quite fits for a beefy boy like the Steam Deck lol.
@hextechmagikarp4610
@hextechmagikarp4610 Жыл бұрын
I'm ok with transparent but if it's not easy as removing phone case then i won't use one.
@AllsFree
@AllsFree Жыл бұрын
This is pretty sweet, I've been looking at the odin to play older games. But being able to play newer games like spider man remastered and god of war 2018 on the go is pretty sweet. Than you can still play games from the more recent Wii u like Mario kart 8
@BrittanyMarie27
@BrittanyMarie27 Жыл бұрын
It’s impressive people can just take stuff apart like this and put it back together. I could take it apart but it ain’t ever going back together.
@MobileDecay
@MobileDecay Жыл бұрын
Tutorial 1. Find someone who is willing to do it for you. 2. Throw money at them. 3. Drink beer and wait. 😊
@TakiUdon
@TakiUdon Жыл бұрын
LOL
@alfredellis8549
@alfredellis8549 Жыл бұрын
I always use a playing card to take screens off. That should work here too if you're patient
@Muhluri
@Muhluri Жыл бұрын
Your English is so good that I didn't expect you to live in a non-English country
@TakiUdon
@TakiUdon Жыл бұрын
I'm American, I've just lived here for a few years.
@Muhluri
@Muhluri Жыл бұрын
@@TakiUdon ah, makes sense. Good video!
@thecyberquake618
@thecyberquake618 Жыл бұрын
I'm hoping with a heat gun, plastic guitar pick and an ifixit suction cup I'll be able to get the screen off cleanly. If not, I'll be grabbing the DeckHD screen in the future so not a huge deal
@alexanderadams259
@alexanderadams259 Жыл бұрын
You are really dope for doing this 🙌 👏
@Cyko..
@Cyko.. Жыл бұрын
I wouldn't do it but I am glad you did. Thanks for the video.
@gooberstankable
@gooberstankable Жыл бұрын
What game is that? Great build!
@xkrismiles
@xkrismiles Жыл бұрын
What game is on your deck at 12:21?
@steamdeckguy
@steamdeckguy Жыл бұрын
NGL I don’t think atomic purple looks as good as I was expecting. Also, the issues with the screen is a big put off. I think I’ll stick with just using decals, particularly since I get bored and like to change them often. Thanks for the video!
@Lions1977
@Lions1977 Жыл бұрын
I bet they start including a screen update with these kits. More profit and also make things easier for people installing.
@Moe_Lester_fromUptwn
@Moe_Lester_fromUptwn Жыл бұрын
Scary stuff. My green case just touched down too.
@karawojcik595
@karawojcik595 Жыл бұрын
@TakiUdon Can you use the stock buttons (from Valve) in the clear shells? I love the clear cases, but I'd personally want all the buttons and trackpads to bring over from the stock shell. Love the vid, and jealous that I haven't gotten mine yet!
@TakiUdon
@TakiUdon Жыл бұрын
Yes.
@SavvySteak
@SavvySteak Жыл бұрын
I would of kept the black buttons except for the d pad and touch pads. Would look super cool with purple and black.
@zarcha
@zarcha Жыл бұрын
i also had to use a sharpie but all went well with the screen using their tools
@retrobear9367
@retrobear9367 Жыл бұрын
I have the upgraded joy sticks and a 2tb Sab. Rocket drive and a snap on case. I just really wanted lit buttons
@Bunnysroom
@Bunnysroom Жыл бұрын
I would love to see a full breakdown of how to swap the shell
@Moe_Lester_fromUptwn
@Moe_Lester_fromUptwn Жыл бұрын
I'd recommend you get a case and get your local tech/repair shop to do it. Trust me.
@palmTreeeeee
@palmTreeeeee Жыл бұрын
its great how they managed to fit a pc inside a skateboard
@bastian1870
@bastian1870 Жыл бұрын
Did this and now my screen won't turn on. It still works fine when docked though so I guess I'm ordering a new screen. Appreciate this video because it's way better than the official.
@aoshii
@aoshii Жыл бұрын
I'm waiting for the JSAUX case, the quality is much better.
@YouAreBreathing
@YouAreBreathing Жыл бұрын
I was thinking of doing a housing swap on my Steam Deck, but I think Ill have a better chance of buying a completed customized Steam Deck, as I can't keep track of the various parts and screws.
@denvera1g1
@denvera1g1 Жыл бұрын
What i want, is an outer sheel+battery combo that bumps the battery up to 90wh, sure it will be thicker, but honestly, the thing is so dang small in my hands i welcome the added thickness
@jimdoom2276
@jimdoom2276 Жыл бұрын
Jesus, you must have absolute shovel hands...
@denvera1g1
@denvera1g1 Жыл бұрын
@@jimdoom2276 Yep, not as bad as my uncle though, cartoonishly round like saussages, despite not being an overly plump person.
@KentHambrock
@KentHambrock Жыл бұрын
If the SteamDeck had shipped in this purple case from the start, I would have purchased one at launch.
This Steam Deck Shell Swap was HARD
23:14
Dammit Jeff
Рет қаралды 74 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
I don't understand why people buy Steam Decks...
22:11
Zac Builds
Рет қаралды 996 М.
I Made My Steam Deck Buttons CLICKY!
6:01
Jason Witmer
Рет қаралды 11 М.
The ULTIMATE Steam Deck
19:29
Linus Tech Tips
Рет қаралды 3,2 МЛН
EASY Steam Deck Case Swap!
8:11
Jason Witmer
Рет қаралды 35 М.
What’s Inside Valve’s Prototype STEAM Console?
19:25
Linus Tech Tips
Рет қаралды 3 МЛН
I Turned The Fake Portable GameCube Into A Real Thing
19:58
GingerOfOz
Рет қаралды 4,7 МЛН
The New Steam Deck: Why OLED?
19:43
WULFF DEN
Рет қаралды 236 М.
I Turned a PS4 into a Handheld Console
27:40
Restore Technique
Рет қаралды 2 МЛН
The Steam Deck is THE handheld to buy. This is why.
15:25
Taki Udon
Рет қаралды 460 М.