My Veto MB tool bag and more - HVAC LIFE

[@HVACRDUDE]

I run the NEBO MAGNETIC WORK LIGHT FLASHLIGHT..WITH AN IDENTICAL HOLDER...LOVE THE MB! DIG YOUR CHANNEL ALEX! YOUR A REAL DUDE! ALWAYS SAYING IT HOW IT IS LIKE ME!! I RUN THE HS36 METER AND THE UEI DL429 BLUETOOTH..BACK UP I HAVE AN EXTECH BASIC TRMS AND A BADASS GREENLEE CM-450..SUPER LIGHT SUPER SMALL..BUT ITS A 500$ METER

[@tbonemoon1330]

I'm about to buy my first meter and I graduate in December. Can't wait to start working. Thanks for the setup explanation!

[@hvaclifewithalex4051]

The best of luck brother, my plasure!🤘🤘

[@b-2466]

I've gotta find a use for my MB. It's an awesome little bag.

[@hvaclifewithalex4051]

Thank you brother!

[@RoseWoodWork]

You are the only electrician tech that I’ve seen from many here on KZbin using high voltage insulated screwdrivers. The majority don’t carry those in their tool bag. It really blows my mind since they are dealing with electrical stuff why they don’t have them. I’m waiting on my veto bag and I do also have and use insulated screw drivers for electrical work better be safe than sorry. I love your video your bag is like a magician bag carry tons of tools 🛠 for the work!

[@hvaclifewithalex4051]

Thank you very much man, sorry for the delay on my answer, thank you for your support!

[@Eddy63]

Fieldpiece SC-260 works for me ...true RMS , very good price ...good for HVAC/R and electrical work ... I love it ...no problems ...

[@Jeepjones85]

Great video, I’ve had a ton of meters over the years and my favorite so far is the Fieldpeice 440 man I love this meter

[@danwhiteglover]

I bought one of these but I really like having my tools in open view so I rarely use this one buts it’s a good quick service tool bag

[@b-2466]

Same. I just been storing stuff I don't use alot in mine but I'd like to find a better use for it.

[@michaelhenderson6292]

I love my MB2 bag. I use one for cooling season and one for heating. Keep the videos coming

[@hvinceac9211]

nice set up, I also have a small carry bag. you have two things I don't have. I do carry two 3.2 amp reset fuses that I took out from carrier RTU's, they've saved me a hundred times.

[@sherwinalvarez7365]

Im new to hvac. I loved this video so much this is my exact set up its working out well. I just have to figure out how to organize it better.

[@hvaclifewithalex4051]

Thank you brother for watching!

[@HVACinSC]

Great video! Thanks for sharing!

[@carlosmonge3292]

The video is not bad. I wish i find videos more about the bag itself. A good review. I dont care about your tools. Good day

[@wazimedoo3067]

Very nice 👍

[@hvaclifewithalex4051]

thank you bro, yes those 3.2 reset breakers are life savers man! thanks for your comment

[@daviddelgado475]

Dang that bag is amazing , i was waiting for you to pull out a compressor too LOL great video hermano

[@hvaclifewithalex4051]

Thank you brother for watching, lol por lo del compresor,

[@Gears.and.Gadgets]

I can't believe you got all of those tools in that little bag.

[@testtickles8755]

That's what SHE said

[@johnd4348]

A 6 in one multi purpose nut driver comes in great. 1/4 inch all the way up to 1/2 inch. It's my go to tool.

[@airprok8328]

yes! first of all, I love your tool bag because I'm currently using the same one! awesome! it's a great little service bag and it suprisingly fits more tools than you would expect it to. I also use the same meter UEI, sorry to hear that you are having some trouble with them. I really like the amp clamp and that it tests capacitors ( microfarads) I'll post a video and show my truck and tools

[@hvaclifewithalex4051]

AirPro K thank you bro, hope I can see your video soon!

[@hvacspecialist22]

I like your tool bag

[@ChrisV-]

I like your tool set up and bag.

[@hvaclifewithalex4051]

ChrisHvac thank you for your comment bro

[@joshuapoche5137]

coast are good lights but my favorite is the nebo slide. bright as hell and doubles as a work light with strong !agnet

[@gelo787ful]

hola alex grasias por los videos siempre los veo y me an ayudado mucho saludos de aqui de virginia 🤠

[@hvachookup]

Im a tech hvac in Canada,Montréal We do about 40-45 hrs all year but we dont do refrigeration in my compagnie Like your video continue the good work

[@hvaclifewithalex4051]

hvachookup refrigeration sometimes is a pain in the ass and very challenging, but paid good. thanks for the data and for your comment!

[@gtownhvac1640]

El video que esperaba ver tu tool bag

[@dormindont1]

Спасибо за полезное видео с субтитрами👍. Thanks your video helpful

[@hvaclifewithalex4051]

Thank you brother🤘🤘🤘

[@treverkirk8110]

If you like that mini circuit breaker. check out the "short pro tool". Takes that a step further

[@hvaclifewithalex4051]

i saw it, it is pretty cool, thank you for watching and supporting

[@michaeljordan1651]

Hey bud love the channel where did you get the service keys from I've been needing to get a few myself

[@hvaclifewithalex4051]

I been collecting them over the years brother, thank you for watching!

[@Jedi529]

Great video.

[@hvaclifewithalex4051]

Sergio Rodriguez thank you for you comment, I'm glad you like it!

[@polotheacguy2334]

Great Video, where did you get the red and the black wire jumpers?

[@mrbadger9920]

Good video, thanks for putting it up. I found it while trawling for veto MB reviews as I am tempted. I have a bosch 10.8v impact just like that but the brushed version. Love it, used daily and still going strong after many years. Where is your accent from?

[@jeffdavis7912]

How do you carry the drill?

[@TPINSC]

I like Your set up. I put a shoulder strap on mine too. You might try a Fluke 324. They are good meters, their small and they do pretty much anything we need and not too pricey.

[@hvaclifewithalex4051]

TP Services thank you for your comment, I will check that meter this weekend, thank you again brother

[@tonelow5]

Are u from Argentina bro ? I seen a few comments below . If so that's freaking awesome , I'm Russian and I love Central American olympics . U guys kicked ass in the olympics this year in rio . Love Brazil too .!!!!! Very strong athletes !!! But to stay back on topic lol awesome bag man . I just started doing installing and I love it . HVAC is where it's at man . With this trade we are always going to work overtime hours making money :). Keep up the great work brother !!!!!

[@hvaclifewithalex4051]

tonelow5 thank you brother, yes I'm Argentinian, and yes we got some good athletes, we will see you in the Soccer world cup you guys will host in 2018, good choice in the HVAC, the best wishes!

[@tonelow5]

Cesar Alejandro Kinzel HVAC-R Thanks a lot brother . I hope I can visit Argentina someday bro :). Good luck to you in your future !!

[@faroukamrane6963]

Thank you for video cauld you make video for tools work with R6ooa

[@marvingarcia8982]

Little bag? De alli salio muchas herramientas. Yo tengo la vetro propack y lo que tu andas estodo lo que se nesesita. Im thinking about getting tbis bag

[@gh3ypr0nlv3]

hey Alex, can you do a similar video but with your tech XL bag?

[@RogelioEsoHagamozlo]

Nice setup. How long is the shoulder strap. How long it gets? Saludos!!

[@20antman]

Nice tool bag. I like the strap that you added to the bag. the head light is so convenient

[@hvaclifewithalex4051]

Anthony Reardon hvacr thank you man, I though it will we good to share it

[@elvinbonilla7]

Brother saludos pura vida

[@LoStr3gatto]

bellissima, piccola ma capiente e ben organizzata

[@hvaclifewithalex4051]

LoStr3gatto grazie per il tuo commento, sono contento che ti piaccia

[@danielcerrillo9810]

Where did u go to school for HVAC or how did u get started? Military?

[@hvaclifewithalex4051]

Daniel Cerrillo hey bro, I did a Industrial/Commercial highschool for 7 years in Argentina, that included 5:30 hours of practical shops twice a week! I learned more about HVAC here in the States. miss those days... thank you for your comment

[@btfmcnn123]

Field piece sc420 and sc440 are pretty good. Had a Fluke 902 years ago I liked that also.

[@hvaclifewithalex4051]

btfmcnn123 I will check it out, thanks man for your comment

[@scrambler350]

I love the dual display feature on the 440 - can jsut stick it to a system and check voltage and amperage without changing back and forth - it's the reason my SC260 stays on the van as a back-up, got spoiled.

[@gelo787ful]

Hey Cesar I have a question for you I bought the coast hl8 headlamp dame version u have I got mine yesterday and it with 4 aa batteries in it Soo did you bought an rechargeable battery pack to charge the batteries or how u do it ??

[@hvaclifewithalex4051]

Maximux Well hey man, never used rechargeable batteries, I used in other head lamps and ending ruin them. I use regular Duracell AA batteries, thank you for your support!

[@hvachookup]

Do You buy all your tools or is thé company you work for pay for them

[@hvaclifewithalex4051]

hvachookup 99% of my tools are mine, my company bought me the meter, thanks for your comment

[@tango0032]

how heavy is the bag guessing 30 lbs

[@hvaclifewithalex4051]

tango0032 I will weight it tomorrow, thanks for your comment!

[@cosminmunteanu2603]

@@hvaclifewithalex4051 1 year and still no weight info :)

[@bennycomptech3939]

Have you thought about getting the MB2?

[@hvaclifewithalex4051]

Benny CompTech yes one of my co-workers has it, I like it a lot

[@bennycomptech3939]

Cesar Alejandro Kinzel HVAC I have the MB as well then saw the MB2 and instantly regretted not getting the tall version!

[@hvaclifewithalex4051]

Benny CompTech yes, waiting for St. Valentine lol

[@45asunder1]

Nomás te faltó la vacuum pump compadre...

[@hvaclifewithalex4051]

Jajaja tenes razón, para la proxima

[@hvachookup]

You seem to do a lot of hours What is a normal day for you In Hours Thanks

[@hvaclifewithalex4051]

hvachookup Normally I do 40 hours weekly, during summer time 60-80 hours easy, thanks for your comment

[@SombraLocs]

Nice! How long have you been doing hvac?

[@hvaclifewithalex4051]

Familia Sanchez HVAC I been in the field for about 13 years, I been in my country in an industrial School for another 7 years...