** MY VW CAMPER CONVERSION BUILD ** #10 Fitting a POP TOP !!!!!!

Welcome Back Campers,
So today is the much awaited POP TOP video........
This video is the full video of what I did start to finish in the hope that if you fancy a go at your own this will help you at least a little.
Now I will say I have never fitted one of these before and I have only fitted this to how I feel is the best way for my skill level and tooling. You may want to do things differently and that's fine but please please only follow this video as a rough guid as you MUST do all your own measurements and planning. This video will hopefully give you the foundation's you need and the rest is up to you.
My advice is only try this if you are fairly confident you can achieve the end results but don't be afraid to ask a more skilled friends for help. This job isn't the hardest job at all..........
I believe it takes as much guts to pull this off as skill so please be very careful and wear all the necessary PPE. So your gloves, eye defence, ear defence etc.
DONT WORK OUTSIDE WITH POWER IF ITS RAINING..........
I would also totally advise that you cover all the van over with sheets. We was very careful with sparks and directed them into the bus for the very little we used a grinder and I trapped them with a fire proof blanket.
BEST OF LUCK...........
WITH A POSITIVE MINDSET AND OUTLOOK YOU CAN ACHIEVE THIS.
Feel free to contact me on Instagram
All my photos I take and work I do I post on my Instagram and you are welcome to join me!
/ jay_saunders_86
~-~~-~~~-~~-~
Please watch: "* * THE END * *"
• * * THE END * *
~-~~-~~~-~~-~

[@JaysFabShop]

*****PLEASE READ FOR POP TOP SUPPLIER. ****** UNFORTUNATELY DUE TO RECENT COMPLAINTS ABOUT VERY POOR SERVICE AND QUALITY ISSUES WITH THIS ROOF I NO LONGER RECOMMEND PURCHASING THIS POP TOP. SO PLEASE BE CAREFUL IF YOU PURCHASE ONE AS I RECOMMEND NOT TO. JAY

[@clickdesignlab]

hey Dude this is really helpful. What brand was the pop top? If you are having issues i want to make sure i don't get the same one but didn't hear in the video where you got if from? Cheers

[@projectt4782]

If you don't recommend the supplier please tell us who they are, I'm about to buy one and want to make sure it's not the same!! 🤷🏼‍♂️

[@JaysFabShop]

Apologies I have only just seen this message. I can’t seem to find the company name now. The chap is called Allan who lives in derby

[@projectt4782]

@@JaysFabShop nice one Jay 👍

[@JaysFabShop]

Hey matey. I have checked but can’t find the company now. The chap is called Allan who lives in derby but that’s all I can tell you really. Just look at the kits and you will be able to tell if it’s the same as mine. With the rubbish fibreglass lengths

[@ryanreynolds4133]

Angle grinder with 1mm cutting disc is perfect for cutting, a much nicer cut and less vibration. will make light work of the cut out

[@JaysFabShop]

Agreed

[@user-mq2ig6dv3p]

Love your honesty bro! And you are so true in taking the time to enjoy the process to produce a professional outcome/ results.

[@JaysFabShop]

I appreciate that!

[@jamesbulley7557]

Great video, very informative. I live in Western Australia and I’m considering shipping a Poptop over from the Uk, after watching your video I am definitely more confident that I could install it myself. Great Job😀

[@JaysFabShop]

Awesome James go for it. Thank you for your comment also very appreciated 🙏

[@carolwhittlesea7683]

Cool work Jay like the flip top already, you explain so well in your work doing your van ,

[@JaysFabShop]

Thanks Carol I try

[@zanyzoo6767]

Great video , very well presented and informative. Thank you

[@JaysFabShop]

Thank you very kind

[@mafarachisi]

Thanks for sharing mate!!! this is just what I needed to inspire my project.

[@JaysFabShop]

Hey mate. Thank you. No problem at all. Glad to hear you like

[@dh6661]

Amazing video, very informative! I've been thinking about doing a conversion camper but was worried on space, after watching this I'm now thinking of getting a smaller van and adding a pop top 👍🏻

[@JaysFabShop]

Awesome thank you for the comment. I filmed a vauxhall combo camper not long back. have a look at that video. That was a very small van with a pop top and loads of space. Video was called killer combo I think.

[@MrMattykuk]

This is great ... I really want to start to convert my own vans in the future and this just gave me some confidence to have a real think about it .. cheers man

[@JaysFabShop]

Thanks for the comment Matt. Great to hear mate and go for it. You would do a fantastic job. 👌🇬🇧

[@DS-cf1zc]

Excellent tutorial on how to do it - must confess I dont feel that brave. You have certainly got it looking really good, and your perfectionists eye does you proud on this one.

[@JaysFabShop]

Thank you Dave. I’m trying my best for work standards and video standards also. Thanks for your comment it very much appreciated 🙏

[@raggedrascal5463]

Excellent video. Given me the confidence to tackle this job myself.

[@JaysFabShop]

Thanks great news. Thank you for the comment and very best of luck. Let me know how you get on or need anything

[@pricey940]

Great video thanks for your help in showing how it’s done 😎👍🏻👍🏻

[@JaysFabShop]

No problem Mark. Thank you

[@jeffchristie1541]

well done Jay and so you should be proud of yourself , Good job young man !

[@JaysFabShop]

Thank you very much Jeff. Very kind 👌

[@Pencil_holder635]

Good job made very clear to anyone wanting to do the pop top conversion

[@JaysFabShop]

Thank you Riley. I have tried. Please feel free to share if you feel I would help people

[@carolwhittlesea7683]

Sure you will change the windows in you lovely van jay, your van is looking cool I injoy all your videos . You cheer me up😉🙂😊

[@JaysFabShop]

Thank you Carol. Lovely comment this 🙏

[@christsanders3017]

Really nice job mate!!! BUILD NOT BOUGHT! Enjoy the van... Cheers 😎🤘

[@JaysFabShop]

Thank you Christ. Much appreciated matey

[@stevejames9454]

.Nice van.Top stuff,thanks4the post👍

[@JaysFabShop]

No problem Steve 👍🏻👍🏻

[@TerminusVox]

Very thorough video. Good job!

[@JaysFabShop]

Thank you Martin

[@bowesproject2304]

Really professional video Wish everyone would do their pop tops like that

[@JaysFabShop]

Well thank you Bowes Project. Very kind of you to say 🙏🙏

[@greyhoundadventures2273]

Great job, very inspiring. Never thought of tackling something like this myself. Ross

[@JaysFabShop]

Hey Ross. Thanks for your comment matey. Yeah it is more than achievable mate 👌

[@adrisnbennett4760]

Mate,,.....looking to do this on my T5 .You've done a thorough job here great video with top tips and the added bits about how you would do it different if you were to do it again, awesome. Cheers pal.

[@JaysFabShop]

Thank you Adrisn. Very much appreciated and very kind of you to say so. Like to try and help people if I can and share my experiences 🙏

[@iangrindley8326]

Fantastic job Jay. Didn’t think it was possible to do a self fitted pop top. Having the extra headroom makes a massive difference inside. Loved all the top tips you gave. Can’t wait to see the Transporter carpet lined and fitted out. Love the van colour and the wheels too. 👍

[@JaysFabShop]

Thank you Ian. Very much appreciated. The start to the wiring video goes up tonight 8 pm 🙏

[@micksmithandyasmineadventu794]

What size tex screws did you use

[@caravancol1]

top stuff geezer, i have a camper all ready which i had done professionally, i still want to build my own and you are giving me some major inspiration!!! keep up the good work i lookforwrd to the next video.

[@JaysFabShop]

Well thank you for that. Lovely comment matey and very much appreciated. 🙏🙏🙏

[@mattkille7667]

Best vid I’ve seen on pop roofs wicked job bruv

[@JaysFabShop]

Thank you matey. Feel free to share if anyone needs or wants to do one their selves 👌want to help as many people achieve this as possible

[@Balls2U]

Great job mate, spot on 👌🏼👍🏼

[@JaysFabShop]

Thanks matey. 🙏🙏👌

[@aidanaltimas2576]

Yo m8 that was powerful 👌 thanks for taking the time out to show us how it's done, would off took you 1 day to fit it, only 3 days off filming, much appreciated, in all the following iv done, nobody shows you in detail how to fit are were to buy the pop top, 1 step closer to doin my owe, cheers bud!! Keep it up, really enjoying your vids 👌

[@JaysFabShop]

Well thank you Aidan. Really nice comment and super glad you liked it. Best of luck if you do yours you will do an amazing job 🙏

[@sepashitakamura6415]

I live is South Africa and have to say this was really helpful and insight full i will be building my own top from scratch as for me to get a pop top like that is just too expensive with rates and all works out to 8000 pounds for me so makes sense to just make it myself. Thanks for the great content and advice on how to.

[@driveheritage]

Great video, done really well and super informative 👌

[@JaysFabShop]

Thank you guys. Very much appreciated 🙏🙏

[@mattoska]

Great job, can you give us a link to buy pop top?

[@projectpowdercoating8258]

Amazing work Jay

[@JaysFabShop]

Thank you matey

Awesome! congrats!

[@JaysFabShop]

Thank you 🙏

[@grazynakaledek6228]

Hey Jay a Professional Job, well done. You should be Proud of yourself. The next one will be easier. You can establish yourself & open a Shop to do Conversions. Thanks for making the effort to share your work & video. Cheers from Toronto, Canada.

[@JaysFabShop]

Hey matey. Thank you for the kind words and awesome comment. Means a lot

[@1GAZL]

Really good video jay, answered all my questions, im about to start my own van, cheers

[@JaysFabShop]

Aw awesome mate really glad to be of help. Thanks for saying so

[@manicminer8813]

Nice one, thanks for sharing

[@JaysFabShop]

No problem Ross. Thank you

[@fightington]

Well done for having a go yourself, big job champ!;

[@JaysFabShop]

Thanks Maty. Nice one

[@Great-to-be]

Well done Jay, great job mate! 👍👍👍

[@JaysFabShop]

Thank you Jay. Much appreciated

[@silverlinkz]

Great work Jay. Certainly food for thought regarding self install, but I personally wouldn't be confident enough in fear of a costly mistake. Don't be too hard on yourself regarding video/audio quality, its more than fine!!

[@JaysFabShop]

Thank you for your lovely comments matey. Very kind of you. 🙏

[@sesproperty8416]

Great video jay. Thank you

[@JaysFabShop]

Thank you Jay

[@fulanito494]

Amazing big job!

[@JaysFabShop]

Thank you

[@tinasimon9479]

Hiya Jay, great job very cool, give yourself a pat on the back not everyone can tackle that kind of job for sure 👍

[@JaysFabShop]

Well thank you. Lovely comment and very much appreciated 🙏🙏

[@babblingbrooksoutdoors]

Great job mate appreciate you taking the time to document it and put this out there 👍.....and also...where did you buy the roof from

[@Iveavan]

I've got to give it to you bud, it takes a lot of balls to peal off the roof, fit an pop top, and to film it at the same time! A lot of work has gone in to this! Even before the editing! I salute you 🙋‍♂️, 😉👌👍👍👍.

[@JaysFabShop]

Thank you Mark. Very kind of you to say 👌

[@Iveavan]

@@JaysFabShop credit where credit's due matey 👌👍.

[@doncahill6216]

Great video .

[@JaysFabShop]

Thanks Don. Much appreciated

[@RalfDragon1]

Great job and i like that wheels

[@JaysFabShop]

Thanks matey

[@gumbokitchen8279]

Bloody brilliant. Thanks

[@JaysFabShop]

Thank you

[@windsurfer2956]

Brilliant video, thanks a lot buddy!

[@JaysFabShop]

No problem

[@alanhorbury8389]

Great video mate , very informative

[@JaysFabShop]

Thank you Alan 👍🏻

[@MrFordymoore]

Great video Ross I'm not confident I can do my own pop top following your pointers 👍

[@JaysFabShop]

Thanks

[@spudbrook5760]

Absolutely cracking job fella 😉

[@JaysFabShop]

Thank you

[@WowForYou85]

Great video mate honestly helped so much Thankyou!

[@JaysFabShop]

No problem at all matey. Glad it helped

[@allengraham7016]

great vid mate and very good detailing great tips am thinking of doing my t4 pitty no one has done a t4 i have seen yet

[@JaysFabShop]

Thank you Allen very much appreciated. Aw really matey you should go for it I shouldn’t be much different I wouldn’t of thought

[@majesticmixturewhitty]

Awesome video keep up the good work on your KZbin videos I’m a KZbinr too can’t wait to see more videos 👍🏻

[@JaysFabShop]

Thank you matey. Very kind of you to say so. Welcome

[@Hitchkinz]

Brave man 😂 well done mate

[@JaysFabShop]

Thank you Andy

[@rayrichards6748]

This must have taken ages to record as you were doing the work. Great job bro. I’m defo going to be doing this on a camper I’m about to buy. Thanks for doing this.

[@JaysFabShop]

Hey Ray, thank you for the comment matey. Yeah to be honest it did. The filming can put a straight on the jobs in all fairness and then after the job Is finished the editing starts 😂

[@bash0774]

Brilliant cracking job 👍🤩

[@JaysFabShop]

Thank you Ian. Please subscribe if you aren’t already

[@karolpowazka6047]

I would definetly tape the roof after you marked the lines before you start cutting. Ill tape it say 10 mm out from the mark this would allow you to follow the line and create edge when you do paint it after. This will save your van paint from all the metal shards and sparks when you cut. Cheers

[@JaysFabShop]

Thank mate and totally correct. Because of the none stop on and off rain we chose not to mask and sheet it in the end. Definitely is a better job to though and I recommend you do 👌

[@thelensmax]

Hi! Nice!!!

[@dieselbushcraft1299]

I like your attention to detail such as painting the bare metal. Such a pity about the loom not being above the brace at the front but you found a neat way of getting around that problem. I agree about the lower height looking better but as you say it’s not as useable as a bed space. The way pop tops seal around the bottom of the canvas puts me off. I have not seen the way any others seal as of yet but having seen your video I will take a look. Great video thanks.

[@JaysFabShop]

Thank you matey. Glad you enjoyed it

[@weedaviec]

The other option for the sealant job is to buy some of those plastic bead forming tools. I love them. Used to have nightmares doing shower re- seals until I got mine. You can get a set of them on ebay etc for a couple of quid. They look a bit like oversize guitar plectrums with curved and straight angled shapes on each corner that make very neat jobs.

[@JaysFabShop]

Aw cool I’ve not heard of these mate but will definitely check them out as I still have the sealer to finish

[@weedaviec]

Jay Saunders www.ebay.co.uk/itm/233363490279

[@carlrigby9370]

Brilliant video well done 👍

[@JaysFabShop]

Thank you

[@carpetman1066]

great video thanks for sharing

[@JaysFabShop]

No problem at all. Thanks for saying so 🙏👌

[@hg2.]

Wish we could have seen you cut the roof. That's the "scariest" part of this great project.

[@JaysFabShop]

🙌🙌

[@garethjones2210]

Well done mate, crackin!

[@JaysFabShop]

Thank you Gareth 🙏

[@garethjones2210]

Making pretty tough jobs look straight forward and with one hand carrying a camera. Fair play. Look forward to more videos.

[@stephaniesturgeon5591]

Pretty cool roof 👍

[@JaysFabShop]

Thanks

[@Hitmeup-e7m]

Very good job. Also brave jezz you wouldn't want to get it wrong. I wouldn't attempt it. Bet you have saved thousands, fair play thou. I'm doing my T4 transporter up. I call it the money pit. But well worth it. As the adventures will start soon😎

[@JaysFabShop]

Thank you Jason. Great name 👌 yeah it was a stressful time but worked out for the best. Great news on doing a t4. All the best to you 🙏

[@Hitmeup-e7m]

@@JaysFabShop yeah my T4 is coming along slowly, Slow steps Jason. It as two names to be fair, the main one is oldfaithfull, The money pit expression comes from putting a hole in my pocket Cheers. Have you not been on any abandoned buildings of latley😁

[@griffincentre]

Good lad quality build. You should do it for livin make a killin if you include vat and VW tax 🤣

[@D5KRC]

Looking good Jay my mate builds campers and I was just thinking it might be of interest to you knowing as he has a (cnc machine) I think it's called cuts all the kitchen wardrobe and draws out. If any help to you hes on here with a walk around of one of his and can be found at tuxford campers. Waiting for the next exploration too. Keep up the good work. Cheers kev

[@JaysFabShop]

Hey Kev, aw sounds amazing he should get in touch with me. I still have all wardrobe etc to purchase. Thanks for your comment matey. 🙏

[@lifegpt]

Boss video well explained

[@JaysFabShop]

Thank you Karl Booth. Your comment is very much appreciated

[@lukejones5803]

Decent vid, looking at building my own camper. Just subscribed 👍. Might have to watch the pop top one 1 or 2 more times though 😂. Probably best to carpet after the pop top then?

[@JaysFabShop]

Hey Luke. Thanks bro it means a lot. Yes I would carpet after the pop top. If you fit glass fit the carpet before you bond the glass on but after you have cut the holes out

[@tonyosborne2708]

Really good work Jay, have been looking forward to seeing this part of the job. Brilliant commentary and tips. The hidden bare metal can rust without treatment, and then there’d be rust streaks appearing everywhere. Every credit to you for sharing this with the world. Top man !

[@JaysFabShop]

Thank you Tony very nice comment. I tried my best and hopefully people will take enough off it to covert their own. Very much appreciated matey

[@patrickjobling8676]

Well pommy pilgrim ..ya done a spiffin jorbb .. pip pips and carryon ..😁

[@natashatriggs3537]

What pop roof is this and how much? Very in depth video. Really helped us.

[@todorshishmanov7903]

Looks superb.But please remember,the DVLA changed the rules,last October,for what can be classed as a campervan.

[@JaysFabShop]

Very true. Please remember I filmed and fitted this long before the changes came in though.

[@u3962521]

Great vid. What was the brand of this rooftop please?

[@martyngamble5770]

Go on the reg. 👌

[@JaysFabShop]

🇬🇧🇬🇧🙏

[@richardbrabbs8283]

You have to hand it to him the man is fearless

[@steventudor2493]

Very well said!

[@ianjames4465]

Hi Jay great video and fair play for getting it done very brave. Out of interest what are the alloy wheels on the van and what size are they? they look great with the grey van.

[@JaysFabShop]

Hi matey. They are off a BMW X5. I think they are called snowflakes. They are load rated and can cope with the band weight etc so I like them to be fair

[@paulbellwood1011]

Hi Jay, this is an awesome video. Thanks for sharing. Where did you buy your pop top please?

[@JaysFabShop]

Hi mate. Thank you. I have the contact details if you would like them can you add me on social media

[@b0mbst3r]

Amazing work and some absolutely great information and content! I appreciate everything you do, keep up the good work!

[@JaysFabShop]

Thank you Thomas. Very much appreciated

[@michaelfowler2187]

Great video. I'm trying something similar. Could you tell me how much height it adds to the van when it is closed?

[@mattoska]

BEST POP TOP DIY on KZbin. where did u buy the new pop top!? Requested you on ig. I can only find junkyard stuff.

[@JaysFabShop]

Hey matey. Thank you so much. No longer recommend these which is a massive shame but the supplier can’t be trusted. Thanks for the kind words

[@Allthingsaboutthegarden]

Awesome. Not seen such an informative video on this. 👍🏼. One question. The first support bar you put in . How do you measure its position so it fits in the correct position front to back .

[@JaysFabShop]

Thanks mate. I mentioned it in the video it goes in line with the body lines but you can measure it from about from the top of the screen back also

[@lucyhumphrey6012]

This is a brilliant video! Very informative! Thank you Jay! We've just bought a small Hijet Daihatsu to convert over the summer for a little project (first time, very excited and slightly nervous, haha)... Silly question, would this work for us? And where did you buy the pop top and roughly how much? This would be amazing! Thank you once again :) Lucy :)

[@JaysFabShop]

Hey Lucy. Thanks for the comment. To be honest it wouldn’t work on yours i very much doubt. I could be wrong though. Awesome to hear you are doing a self conversion. You guys will enjoy it so much

[@jimmynguyen9679]

Great job , top tip check the weather before you do

[@JaysFabShop]

Very true 😂. Unfortunately though work commitments mean only time off here and there so I had to crack on no matter the weather

[@jerrysmith2064]

Great video. I'm just about to start my conversion on exactly the same van. Where did you purchase the roof from?

[@JaysFabShop]

Hi Jerry. If you have any social media my links are below please message me other that

[@MegaGoodStaff]

Great stuff top explanation just wondering what kind of problems did you have afterwards

[@JaysFabShop]

Hey man. I didn’t really have any problems with mine. But after about a year I started to get other people message me who had brought one saying the new type that was being made are absolutely junk.

[@thomaslindemann5655]

Hi Jay, great video, really informative. Could you tell how much this costs in total, with tools and hardware ? Thank you !

[@JaysFabShop]

Thank you Thomas. I had most of the tools already to be honest but let’s say I didn’t. I would say this can be achieved very comfortable for £1500

[@lexdoit4921]

Great job man for me its perfect. seems to me your and expert on that. keep it man.

[@JaysFabShop]

Thank you matey for your kind words. Very appreciated

[@aaronag7876]

Excellent advice, help, hints and video. Thank you for making the mistakes for us. Did you foam fill the supports after you put in the long black support poles. These are the bits had the 10mm boles poking up into the old support beams, because you worried about the edge of the metal, I wonder if you insulate the roof after you fitted the roof ?

[@JaysFabShop]

Hi matey. No I didn’t foam fill the supports after. I could of to be fair but worried that the foam would hold moisture and make things worse? That you think?

[@JaysFabShop]

Sorry and I have insulated all the front but I have not yet insulated the rear of the van yet. My next jobs are that and fitting the wiring and second battery

[@bilbobaggins7137]

My eyes kept on getting distracted by the Vauxhall. Nice motor.

[@JaysFabShop]

Ha ha. Me too. I’ve been asked a couple of times now to film that. I’m doing the full restoration on it when the van is finished so I may film my steps but not 100 percent yet

[@ogormanator]

Great job Jay, I'd even try it myself now .Fair play to you!

[@JaysFabShop]

Thank you. Glad you enjoyed it.

[@Caddycampers]

great job buddy..where did you get your roof from..cheers phil

[@dannorris4945]

Hi Jay, Another brilliant video, watched a load of the others as well. I also like doing my own stuff. Finally picked up my own Transporter after having been into Aircooled Vee Dubs for many years and then wanting a daily modern van. Mine is a 2012 140 horse Olympian blue panel van with Sportline bumpers, 20" alloys, rear spoiler etc. So chuffed and can't wait to put the windows in etc. The guy in Derbyshire wouldn't happen to be Allan Schofield based in Glossop would it? He has his VW Transporter parts and accessories business there. Be cool if it is as he is only local to myself.....approx 5 miles away. 😃 So damn easy for me to pick up.

[@n4ths]

great job, where did you buy it from?

[@frankyates7910]

nice job

[@JaysFabShop]

Thank you Frank

[@stuart7523]

Nice video mate. Quick on, what seat covers have you fitted in the front? Cheers.

[@JaysFabShop]

They was purchased off eBay mate. £50

[@chrisfowler2078]

Hi jay unfortunately I’ve already fitte this kit last week and Alan sent me this video to follow. Not knowing you don’t recommend it anymore. Anyway as it stand I’m happy with mine at the min. Sure time will tell. Question is Did you manage to adjust the roof on the hingies? I need to move it slightly but stringing with the Weight of the roof as you have to loosen the Botha when the roof is up. Any recommendations how to do it easy ?

[@kwoody1986]

Just subbed enjoyed watching this video. Where did you purchase the poptop kit as currently doing my Nissan primastar van. Take care cheers Karl

[@JaysFabShop]

Hey Karl. Thank you matey glad you enjoyed. I brought this one off a chap on eBay. He sells them from derby but I think he only makes t5 once’s I’m afraid.

[@jkee254]

Hi Jay, great job. I bought the same kit and just wondering how you fitted the reinforcement bar along the back cut. Thanks J

[@JaysFabShop]

Hey mate. Thank you. I screwed it down between the two skins across the back? Have you got Instagram? I can send you pics if you like

[@jkee254]

Cheers, that would be great, I’m jkeely77

[@martincrane9098]

I recognised that voice Jason , before I even saw you ! Good Job mate.

[@JaysFabShop]

Hey Martin. Awesome to hear off you mate I hope you are very well?

[@martincrane9098]

@@JaysFabShop I'm fine thanks mate I'm a full-time Grandad . You're still not getting my planishing hammers though!

[@JaysFabShop]

Awesome matey. Glad your well. Keep those tools safe for me then 👌🥰

[@garylukasiewicz7053]

What steering wheel is on the T5 , also what size tyres do you run on the tiger claws , Regards Gaz

[@steverichardson4808]

This is the most comprehensive poptop vidio on KZbin. Did this conversion increase your van insurance much, have you insured it as a camper

[@JaysFabShop]

Hey Steve. Thank you. Me personally no it didn’t effect my insurance at all