Building A Raised Floor Inside My Barge Boat

[@MyFirstBoat]

Visit highlandtitles.com and use the discount code BOAT25 to get a 25% discount on your purchase!

[@aleho1]

Please dont be pushing this, it is a scam in a sense and titles are not legal or genuine.

[@SuperJlonergan]

i didnt notice are you using gas or flux core wire....what amps are you welding at?

[@MyFirstBoat]

you're missing the point, it's not about the titles, its about preserving the land, its a charity, the titles are more of a novelty item, no one actually thinks that's a genuine nobility title... You probably wouldn't buy this for yourself, but bring it as a gift to a friend or family member, rather than a bundle of flowers which cost similar amount as entry level offers by HT.

[@aleho1]

@@MyFirstBoat it also doesn’t guarantee the land is protected. But I like your attitude and there should be more out there to give people a sense of ownership and responsibility for nature and the protection of endangered trees and animals, as well as climate. ❤️

[@aleho1]

@@MyFirstBoat I love your boat videos, your wit & humour as well as the progress. I did understand your point, it’s just that the company is dodgy.

[@5thGenNativeTexan]

Love your big boat project. Shorter content, but more frequent posting, is a welcome change. Thank you!

[@kirbygulbrandsen4507]

I like the voice over better than you trying to explain as you go and it cuts down on the noise. Watching from Panama City Florida,USA. 🇺🇸🦅

[@richardowens9061]

I've been looking forward to an update on this project. Thanks!

[@garyfairbrother5532]

I see an opportunity to keep dinner and serving plates, trays and baskets and perhaps even center pieces or candles stable on that table. Magnets epoxied on/or into the bottoms and bases of anything you want to keep on the table while underway or swells while anchored. Oh, the saw usually does that when you changed blades if you put the new one on backwards. Check it out.

[@Bruin4Life]

Things are looking great and I am impressed with the time you are taking to make sure your measurements are correct. Better to measure twice or more and cut once accurately. 😊

[@Raxsal]

Was für ein großartiger Content. Ich könnte deine Videos in Dauersxhleife schauen! Wann immer es deine Zeit erlaubt, nimm uns bitte mit. ❤

[@taurota1554]

Awesome.Thanks for sharing and taking us along

[@mundanestuff]

Nice work. As usual for your projects, detail oriented and precise. The room will feel much warmer when you have this floor in.

[@daveamies5031]

Remembering watching your early videos and then watching today such a big improvement, and then I notice your number of subscribers which was less the 1k when I found your channel. so wanted to send this message of encouragement you are doing well and getting better thank you for all the enjoyable videos 👍

[@charleshutchings9355]

The work you do amazes me. The boat is coming along nicely, and I am anxious to see the next episode. Cheers!

[@davidmcduffie1398]

Great Job ! I like your table with the lockable wheels. Your skills are improving for sure ! ! !

[@joeschmoe1301]

These video's are so calming and satisfying. 😊

[@spitzillaz]

For your circular saw issue, I think you have your blade on backwards. Try flipping it around and it will probably work much better.

[@alfaventador898]

agreed, the new sawblade is mounted on the saw backwards.

[@Jacob-de-Veroveraar]

Have a look at 15:16

[@ItsFriscoBaby]

Yeah the blade is backwards

[@mattfink9317]

Yep it’s on backwards good catch.

[@michaelblankenship548]

Good catch, but after running it like that for that long, the blade is ruined. He'll need a new one. I made the same mistake with a table saw when I was in Job Corps as a teen.

[@cristiangonzalez1707]

Greetings from Chile, it is very nice to see the way you materialize your project. I congratulate you, it looks excellent.

[@bally1213]

I appreciate any time you have to provide your videos, they are always great, let’s hope for a good summer for all of us and more videos from you. 👏👏😉

[@MrPetrvershinin]

I have been carefully watching the “process” since the first appearance of your broadcasts on KZbin (from the moment the FIRST BOAT was put in order)... ... what attracts me and what I observe with great pleasure is NOT ONLY ACCURATE EXPLANATION of what is happening, BUT THE MAIN THING IS HOW CAREFULLY EVERYTHING IS PLANNED AND EXECUTED... ... SUCCESS IN GENERAL AND WITH FLOATING AQUIPMENT WITHOUT ANY DOUBT!!!!

[@brymstoner]

i know it's been said many times before already, but watching you hone your skill as a handyman over all of these videos is inspiring. keep up the overall fantastic work!

[@neillambton4065]

I really love watching the progress of how your projects come on, so if you`re going to do more vids, i`l certainly be looking forward to them.

[@dennislezeta9537]

The milimetric precission of your work is so satisfying

[@rkeantube]

love the table extremely industrial

[@Mrdogface12]

Always enjoy your vids. Looking forward to the next one. Brilliant.

[@VelcorHF]

Love the video. Glad to have your posts.

[@commanddos]

I'm watching your since the beginning and I must admit I'm a little bit jealous about your patience to the precision.

[@tjm5492]

One great feature of your table is, even in a storm with gale force winds, that table is going nowhere! Looking forward to your next installment.

[@gavinferguson]

at worst it could be used as an emergency anchor

[@Chr.U.Cas1622]

👍👌👏 Very "weld" done table, Sir. Congratulations 🎉 Thanks a lot for making teaching explaining recording editing uploading and sharing. Happy Easter! Best regards luck and especially health to both of you.

[@jakobrebeki]

I love this barge project....

[@martijnnieuwenhoff4474]

His kitchen and bathroom boat could give us even more content to watch, but… budgets, time and workforce. Great content by the way, even the choice to sell all but 1, and buy this big barge in return.👍🏼👍🏼

[@davidzimmer2694]

You do what you need to do. I'm happy with your content. Love the videos.

[@ozbassman11]

Well done, loved the video and look forward to the next. Thank you.

[@stevehoward3981]

Love these video’s and the thought that goes into them.

[@wyattfamily8997]

Have been watching from Australia, very good job so far.

[@EricReitzel]

We watch on your schedule my friend. Love seeing your progress but keep it on your terms.

[@gavinferguson]

good job.. earlier in the build i had hoped you would cut the deck off and build up from the hull to make a 2 story home bedrooms below living on top might even worked out at the same hight if just a little bit higher. but this looks like it is working for you now.

[@ufoguys1264]

Wow grate nice very nice😊😊😊😊😊

[@joes8923]

Keep up the great work and don’t listen to the trolls.

[@drefplin]

I like your tabel. Good work.

[@pitbull2743]

Looking very good.

[@omvaren]

more videos...I love it!

[@Junkboy888]

looking good.

[@RohanderStevens]

Good one bro keep up with the good work 👏 🙌 🇯🇲

[@steveingram2773]

Love your video's. its been a great journey

[@nf5557]

love your work!

[@jackiejanetm]

Always interesting videos. Thanks!

[@GoPoundSalt]

Such a long way from your first boat and your Asian partner :)

[@Nerd3927]

I am always happy when you post, but enjoy the Free life you created for your self without pressure from viewers! I guess most rich people would have to admit that Talent + Youth + Freedom is worth more then Old Age + Lots of Money. You are doing good on that part.

[@festol1]

How do you compesate for the boat "pitch"? I mean, the boat may became front or rear heavy and sink a bit, so the level would became a bit off when the conditions change.

[@raziel3726]

Amazing Craftsmanship 👍🏻👍🏽👍🇬🇧🇬🇧

[@Satwamassive]

Love your videos buddy!

[@Blast357]

make sure to account for wood expension or youll have having a bowed floor!

[@soulxtr]

I would not say that this is a table. This is a workbench for locksmith work. Very heavy. It is important to observe the culture of weight on the boat.

[@TheMeekSheep]

Post videos when you can. Don’t worry about people saying you don’t post frequently enough. They need to start their own projects.

[@dougcampbell740]

Another great video. Your work is always precise. It seems you're sacrificing quite a bit of ceiling height with the floor structure, no? Do you need that space beneath to run services?

[@RogueBohemian]

That steel table is overkill. Especially considering boat concept is saving weight. Wheels on it, you'll find it creates ballast issues more than likely when moving it from side to side.

[@hunthercaio]

I assure you that they are ready to go on a large ship's hat so that they are towed while the boat is not ready, so it is not sold to the hat on the table pins, after which it can be found on the table or the glass

[@teeanahera8949]

Seriously mate, do you have a single idea about how big this “boat” is? It is a barge that is flat bottomed, huge & made from very thick steel and used to carry hundreds of tons of cargo, a steel table weighing 100kg is NOT going to cause “ballast issues” on a 10m wide steel barge. 🙄

[@RogueBohemian]

@@teeanahera8949 I've built barges, son. I'm a career welder retired. The heavier it is, the more it takes to control. But you know everything.

[@gregbolitho9775]

Nice goin m8. Nice table but I thought it'd be a bit heavy, given the material. Really liked the wheel idea. Like the plan for the living area. Looks good, plan wise. I'll look good when you finish it. Keep up the good work, stay vertical Eh!

[@robertpettigrew9042]

Looking good!

[@yardarm5]

. voice benefit . Thanks 🎉

[@artmraz]

Take your time well wait !! :)

[@thomhofferber310]

Looks great just don't step in that hole.

[@eugenio1542]

wunderbar 👍👌🤙

[@richardspacetimeuhrensamml4236]

Die Perfektion ihrer Arbeit in ehren, doch bitte entscharfen sie scharfe stahlkanten an ihrem robusten Tisch 🌟

[@soniclab-cnc]

you have the saw blade in backward in your skillsaw

[@graememercer1653]

Do it in your time not anyone else but looking good

[@MrRossi1805]

Nice project

[@paulhoneyman6923]

Great progress on the big boat. I have a question that I hope will help you. That big hole in the floor, will it not cool the new raised floor in the cold weather ?. Keep up your awesome work and I'll be waiting for your next video when ever it is good FOR YOU to post it. Thanks for sharing your journey

[@kimkimkim2634]

Who says you have to publish videos more frequently? It's nonsense, don't listen to them. Take your time and do what pleases you otherwise we may rush things and make bad decisions! (your videos are awesome!)

[@michaelmcclure8673]

Are you using a mini split for heating and cooling ? 😎

[@maybulleen]

For the roof of the barge USE white EPDM .

[@cd87104]

the best self-narrated content on yt.

[@925DIYdad]

So much metal on the barge. I wonder what the weight limit would be

[@Thomas-y3w]

are you concerned about galvanic corrosion at all or is it all steel ?

[@tomcole3846]

I’m not sure how the red squirrel is considered endangered. In northern Wisconsin they’re in abundance and quite a nuisance 😂

[@Old.man.withtools]

Your circular saw blade is on backwards. Have an amazing day.

[@rogerroger7734]

Definitely on backwards.

[@petewitt2867]

My man. An impact driver would change your world. You’ll never drive a screw with a drill again.

[@RandomPerson-sb5mw]

the blade was backwards on the saw..... @15:10

[@unsichtbar08]

happy Easter

[@shovelover]

how bad did you sunburn yourself welding in shorts and a tank top?...

[@aleho1]

Can’t wait to see the floor ready for build

[@51actual]

What happened to the other steel boat?

[@skipperdave5794]

Tolles Video und willkommen in der Highland Family

[@racebanning6390]

YES ITS BEEN A WHILE, BUT GLAD TO SEE YOU HAVE BEGAN A FULLTIME LIFE ON THE WATER, HOW KOOL. THE INTERIOR IS LOOKING GREAT, THAT STEEL TABLE IS AWESOMW. I USED TO HAVE ROLLING STEEL TABLES AT MY LAST JOB, AND THEY WERE SURELY THE BEST THING TO WORK ON. NICE TO SEE YOU BUILDING OUT THE INSIDE OF THR BARGE, THOSE FLOOR JOISTS WILL HELP KEEP IT SO MUCH WARMER OFF THE STEEL. ARE YOU PUTTING 2-3 INCH INSULATION BOARD IN BETWEEN THE WOOD?.. THAT IS THE BEST PRODUCT FOR THIN FLOOR SPACE. ITS GONNA BE SUCH A GREAT SPACE . BE BLESSED. 👍👍🙏🙏💪💪

[@_-martin-_]

Please don't use the jig saw to make straight cuts. Use the circular saw. This is the first thing carpenters learn.

[@chris_e940]

You need to read an audiobook and release it… a very soothing voice 😂

[@robertjerome1889]

Yes.. maybe you i stalled the blade backwards. Saw should have cut that wokd without any problem.

[@ronmarschall5900]

11:54 11:55 11:55

[@rolandtrautmann8]

👍

[@johndejong8119]

The distance between your beams is ti big. You will end up with a bouncing floor.

[@DeanofMachines]

Highland Titles is a dishonest company. You aren’t buying anything but a piece of paper.

[@TommyGus]

Hitting your elbow on that table is going to be an event.

[@mirospain]

Geiles Video. Wie immer. Ich such gerade nen Schwiesser für n Boot in Berlin. Kennt wer vielleicht jemanden?

[@xspager]

Note: NASA shorts don't count as PPA for welding

[@sergueiothonucci1638]

😃😃😃

[@10tenman10]

My daughter lives in Berlin. Do you do this videoblog in German?

[@DrMott]

Excellent

[@marcel1813]

👍👍👍

[@wobby1516]

In engineering that’s not crude it’s called shimming and a quite legitimate method.

[@dmitriiputilov8544]

👍👍👍👍👍👍👍👍👍👍👍👍👍

[@dansegelov305]

Not another Scottish Lord scam!

[@Gourmetper]

😘

[@colin8653]

Longer and more frequent would be very good starting to look like a houseboat

[@-EchoesIntoEternity-]

Highland Titles, rebranded Established Titles scam 😂

[@Falney]

It's actually a different company doing the same thing

[@_MrOcean]

@@Falney Yes there are many. Neither are the actual Lords of the land there, ironically.