Just a 10 min video, that shows what to do, when your generator doesn't start.
Пікірлер: 254
@MegaSafetyFirst2 жыл бұрын
You are a true hero!! I’m the time of need your video helped us get out generator going again. Here’s a little contribution for your efforts in trying to help complete strangers. God bless ❤️👍
@mygiguser2 жыл бұрын
Thank you, very generous of you!
@tonikins997713 жыл бұрын
Thanks for this video. Taking apart a carburetor scared the crap out of me. This video really simplified it and gave me the courage to do it. My generator is back up and running thanks to you. Thank you!
@39ches4 жыл бұрын
Generator would start, run 5 to 10seconds and shut down. The low oil light was on, but the the oil level was full. I found the yellow wire coming out of the crankcase, disconnected it and electrical taped both connectors so they wouldn't touch each other or any part of the generator. It started and ran like a Rolex. Thanks for the very helpful, detailed and easy to follow instructions.
@heathenqueen64684 жыл бұрын
This is by far the most comprehensive, informative, and organized vid I could find on how to trouble shoot a generator, thank you
@drewschuler84604 жыл бұрын
My man. Thank you so much for this video. Successfully disassembled, cleaned and rebuilt my first carburator.
@conan48874 жыл бұрын
I have to thank you for saving me from buying a new generator. I had the carb off apart and back on in 1hour it started right away. awesome video! and I am a carpenter not a mechanic:)
@bobkirkpatrick46384 жыл бұрын
Tried to start my generator yesterday. It is the exact model you have so finding this was lucky for sure. Today I did as you show and found the jet clogged, a bit of cleaning and reassembly and it started right up. Without the guidance i would not have fixed it most likely , Thanks for helping me get it running again!
@tomecrawford6 жыл бұрын
Thanks mate, you got me going again. When I checked my oil level, it was almost empty but after I topped it up, the generator started immediately. You have saved me a lot of hassle. Well done and great video.
@carminemurray66242 жыл бұрын
Very good tip Mate ! I oftentimes forget to check suchlike things. Cheers ! One reason I love the Harbor Freight Neon Spark checker, you can test for spark with virtually any engine that produces a spark save anything that has individual coils on each cylinder.
@harrymcglade74222 жыл бұрын
game changer thank you so much, my generator not started for 8 years and following this tip started on first pull, perfect
@mygiguser2 жыл бұрын
that's great news!
@CooLDowN_20203 жыл бұрын
I watched full ads, NO SKIP for me to pay you for this very helpful information. Thank you Sir
@nedalshahin72272 жыл бұрын
Thank you very much for this video. I have a generator similar to yours, and the same problem. I followed your steps exactly, and it actually worked from the first time. You are a wonderful person, may God bless you.
@MrOhReally2 жыл бұрын
Just like all the other commenters, YOU SAVED ME A BUNCH OF MONEY! 🙌🏽 Thank you so much!
@michaellynch11596 жыл бұрын
Thanks so much! I bought a 7K generator for $20 and now it's working! Just in time for the ice-storm.
@chesshead39434 жыл бұрын
Sweet!
@chesshead39434 жыл бұрын
Sweet!
@mikolyayomikun90702 жыл бұрын
It actually worked for me...just now , I decided to check KZbin to see if I can get my generator fixed ...and presently I'm charging my phone with my generator power ..thanks much
@mygiguser2 жыл бұрын
Great, i am glad this video helps so many viewers. Thanks for the kind comment!
@MegaSafetyFirst9 жыл бұрын
Very well explained, it helped me a lot to get my engine running again. Thank you!
@mygiguser8 жыл бұрын
Thanks!
@DaxM4 жыл бұрын
YOU ARE A LIFE SAVER MISTER!!! Thanks very much for the walk through. It was a clogged carb.
@mikebaumer89255 жыл бұрын
Great video. Extremely well done very clear Thanks to you I was able to fix my generator!!!
@alecrisser127 жыл бұрын
I like your accent, also this is helpful. I'm trying to fix our undiagnosed Husky 1850W, and while watching this I'm cleaning the chassis because it hasn't been interacted with for 5 years or more.
@mygiguser7 жыл бұрын
Thanks!
@eemage94764 жыл бұрын
You saved me a lot of money here. It worked nicely for me. Thank you very much!
@rjsimmons61736 жыл бұрын
Thank you for this detailed troubleshooting technique. Very helpful - cleaned the carb and it works great.
@life_motived_corey4 жыл бұрын
What you clean your carb with.
@1jetrix8 жыл бұрын
Best video explanation I've seen so far. I'm going to try to get my generator going now, instead of bringing to a mechanic. Thanks!
@mygiguser8 жыл бұрын
Thanks! Good luck with yours!
@sergiocanabal77147 жыл бұрын
mygiguser excellent well explain help me with carburetor
@chuckyd15776 жыл бұрын
Thanks!...your tips helped me fix my generator.
@DragonettiDean5 жыл бұрын
Thank you for presenting in a logical straightforward fashion
@tatendamugabe91877 жыл бұрын
Quite clear demonstrations. Well done.
@Steve-o-wl1yc3 жыл бұрын
The air compressor blowing out the carb did it for me! After over two hours of playing around with it I was about to take it to the curb. I watched your video, now it runs beautifully... THANK YOU!
@chuck1prillaman5 жыл бұрын
Don't forget to check that the sparkplug is hooked up and reasonably clean.
@jerrycannon61456 жыл бұрын
I'm machanically inclined too man. Love your vids. I work on small engine too. I work out of a 10x14 barn or right on my tail gate lol
@mygiguser6 жыл бұрын
Thanks for watching!
@poppyatcs45296 жыл бұрын
My generator would only run if I sprayed carb cleaner in carb. I took the carb off, cleaned it per your instructions, and it starts first pull now !!! YEAAAAAAAAAAAAAAAA! Thanks for the lesson.
@mygiguser6 жыл бұрын
Good to hear!
@theuniscbravo3 жыл бұрын
Difficult to come to terms that the spark plug was not checked at all,and probably one of the major causes at generator startup failure.
@mygiguser3 жыл бұрын
Spark plug may be second on the list, but thanks for the comment.
@Adrian-ig6rj3 жыл бұрын
Spark plugs rarely fail on small engines, I work on them it’s usually the carburetor that’s clogged up because of ethanol gas. Spark plugs usually last the life of the engine
@dirkjachimsky94012 жыл бұрын
@@mygiguser "Spark plug may be second on the list...", but 10 times quicker than all the work with the carburator.
@thywillokpara87334 жыл бұрын
Awesome work!!! The people that dislike this class video must be workers from funeral homes.
@mygiguser4 жыл бұрын
Thywill Okpara 🙏
@franciscouzcategui1160 Жыл бұрын
What happens when starts and then it goes off after 3 minutes ? I have a small Ingco gasoline generator
@davidbell58983 жыл бұрын
Thanks very much! Started up first pull, very satisfying.
@flufflepimp20902 жыл бұрын
SAVED MY JOB! Thank you so much!
@rafistudio61007 жыл бұрын
super guideline..i make fix my generator thx buddy..my generator have engine oil level down
@jeffreym63705 жыл бұрын
Watched the video and did what you did and it worked. Thanks for your help
@iminit4themoney3304 жыл бұрын
From a woman who knows nothing about generators but owns one I sure do thank you for this video 👏🏻
@GalVanunu125 жыл бұрын
Thank you for the video,thanks to you i fix my friend generator,by cleaning the carburetor,yor are the bast!!!!!!!!!!!!
@mygiguser5 жыл бұрын
Thank you!
@richardolivares26034 жыл бұрын
Amigo era justamente la falla, me sirvió tu video, saludos desde chile
@brettterence7 жыл бұрын
Thank you great information
@sp-yj5wr7 жыл бұрын
Great vid! Probably better and easier to drain fuel from the carb drain bolt.
@dilbertbob54205 жыл бұрын
I guess the consensus is that the problem was old gas. I didn't see a lot of gas in the carburetor. I use leaded gas in my small engines. Its expensive and the octane is high, however, the ethanol content is 0%. Ethanol invites moisture (water) into the carburetor and before you know it, you are either rebuilding the carburetor or replacing it. The alternative to leaded gas, if you can't find it, is to buy gas with a low ethanol content and treat it with StaBil gas additive.
@bengardiner38674 жыл бұрын
Das ist sehr gut! Ich habe ein mit der susamen problem. Es ist zu kalt jezt, but I will do the carb removal and try that. Danke!
@johnb73467 жыл бұрын
Not the cause here but as an fyi, use no-ethanol gas. Ethanol kills these small engines. Hard to find sometimes but will save you in the long run.
@williamsmith6914 жыл бұрын
Great job, I learned alot.
@daviduweh544719 күн бұрын
❤ I love this This is a great job sir
@kellykarns8344 жыл бұрын
It's not as intimidating to fix it myself, now. I can handle that. Just needed to know how. Thanks for sharing this.
@bl95312 жыл бұрын
Many thx for the video … my carburetor interior and particularly the float were a deep yellow colour. I tried compressed air and a deep cleaning but didn’t work. Starting again tomorrow but planning on disassembling and cleaning the jets with carb cleaner and steel wool - wish me luck
@mygiguser2 жыл бұрын
Good luck!
@bl95312 жыл бұрын
@@mygiguser works now, thx for the excellent video and the 🤞. the main jet didn’t appear to have a slot in the brass bolt. I applied carb cleaner down the tube - two side jets were easily removed-.at first the screws wouldn’t budge - great care must be taken with these brass screws because the metal is very soft - so I applied penetrating fluid and waited 30 minutes. Thoroughly cleaned the jets with carb cleaner and slid a thin needle through the tiny holes in the jets. Didn’t start last night but this morning it’s working like a … we’ll, like a generator
@faffaflunkie6 жыл бұрын
Do you happen to know how to set the *governor* on these small _Champion_ generators? My 80cc Champion generator surges like crazy anytime the load changes.
@mygiguser6 жыл бұрын
faffaflunkie check this guy out, he explains it kzbin.info/www/bejne/jpOpqnqInt2ifaM
@musicvibeswithsteve27834 жыл бұрын
Thank you. I think this is exactly what I need to do. Carb has old gas in it. 👍
@ronniewilliams55822 жыл бұрын
OMG!! Thank u so much!! I followed this to the T !! And it cranked up..thank u!!
@joevaldez25717 жыл бұрын
Thanks so much for the tutorial. I had been trying to get my generator that sat for over 4 years going and had no luck. You showing how to take the carb apart and clean helped tremendously. My generator started on the first pull.
@archiedoughman53297 жыл бұрын
Thanks for the upload
@olaoyewinner3 күн бұрын
I love this perfect video I will service my generator today 😂😂😂😂😂😂😂😂😂
@TheJohnny01786 жыл бұрын
Thanks man nice work,
@pastorlugo121 Жыл бұрын
Outstanding video. Thanks.
@craigratajczak67215 жыл бұрын
before I removed the carb I would have removed the spark plug and checked for spark
@SuperJBXx5 жыл бұрын
Hi , great video , i have almost the same problem but mine start and turn off right after
@mygiguser8 жыл бұрын
By the way: Most of the time it is old gasoline, that prevents the generator from running. It seems to collect in the carburator.
@bulldog1111117 жыл бұрын
what do you do if its old gas
@mygiguser7 жыл бұрын
Drain the old gas, open the screw on the bottom of the carburetor as shown in the video, put everything back together, fill in new gas and you're good to go.
@mikelucio14007 жыл бұрын
mygiguser my generator starts but no power to outlets any ideas
@chadholmes70517 жыл бұрын
Check thermal circuit breaker sometimes they fail open circuit and won't reset check wiring and sockets for continuity you should be able to test the resistance of the stator through the mains outlet and this will prove the generator will work if there is a rotating magnetic field. If the generator has been dormant for a long time and it is self exciting type the rotor can lose residual magnetism needed to self excite unfortunately only way to fix that is remove the rotor which is the spinning bit inside the alternator and give it some loving with a strong magnet not important to be perfect just enough to leave a residual field to get things moving probably not a bad idea to test the diodes in the rotor field f accessible then put it back together and run the generator it will establish correct magnetic field once it's generating again. If unit is externally excited then could be a faulty avr ( automatic voltage regulator ) board or worn brushes and in rare cases open circuit winding in rotor in this case repair gets expensive.
@chadholmes70517 жыл бұрын
Check thermal circuit breaker sometimes they fail open circuit and won't reset check wiring and sockets for continuity you should be able to test the resistance of the stator through the mains outlet and this will prove the generator will work if there is a rotating magnetic field. If the generator has been dormant for a long time and it is self exciting type the rotor can lose residual magnetism needed to self excite unfortunately only way to fix that is remove the rotor which is the spinning bit inside the alternator and give it some loving with a strong magnet not important to be perfect just enough to leave a residual field to get things moving probably not a bad idea to test the diodes in the rotor field f accessible then put it back together and run the generator it will establish correct magnetic field once it's generating again. If unit is externally excited then could be a faulty avr ( automatic voltage regulator ) board or worn brushes and in rare cases open circuit winding in rotor in this case repair gets expensive.
@chesshead39434 жыл бұрын
Great video, thank you!
@colewinkler40486 жыл бұрын
At the throttle, I see the thicker wire. What is the tiny wire ? What is it supposed to be connected to ? I had to manually hand-jive my throttle for about a minute before the engine would run on it's own. Thanks !
@mygiguser6 жыл бұрын
are you talking about the throttle return spring?
@UsmanKhan-mo2gb6 жыл бұрын
Fuel system cleaner work well if cab is blocked or else??
@mygiguser3 жыл бұрын
unless the debris is made of metal
@WaseemAkram-zw9bx5 жыл бұрын
Plz help me my generator engine speed is high not to be control???
@Refurbishedpaperfolders7 жыл бұрын
Lifesaver! Just a small spect of dirt in the carb after taking it apart.
@zorroxyx76532 жыл бұрын
Great work... Excellant
@ederkinrivera13692 жыл бұрын
I have one that works good, but the power is no good, is not strong, or not made a lot energy?
@mygiguser2 жыл бұрын
Air filter dirty? Or also dirt in the carburetor?
@osulistiokai2615 жыл бұрын
God job,, Thanks very much !! I can Use my generator
@Miragha-Roohani-Network4 жыл бұрын
Great explanation
@DavidDavid-oe4nq3 жыл бұрын
Where can I connect the crank cable for the generator
@sagadabeans Жыл бұрын
What is the tool used to remove the air filter housing?
@mygiguser Жыл бұрын
ratchet with extension and 10mm socket?
@sagadabeans Жыл бұрын
@@mygiguser thank you! My adjustable wrench couldn't fit the tight space but I managed to remove it with pliers. Thanks to your instructions I was able to make the generator work.
@soyyo49684 жыл бұрын
Me sirvió. Thanks!
@sfyie2 жыл бұрын
can i use wd-40 on a rusty crankcase(fuel tank) of my Honda generator. Please reply🙄
@mygiguser2 жыл бұрын
yes, but the fuel is going to wash off the WD-40
@sfyie2 жыл бұрын
@@mygiguser thanks❤
@Migou333335 жыл бұрын
great help !!! thank you
@mygiguser5 жыл бұрын
Thx
@immrnoidall6 жыл бұрын
same generator as my 1500 / 2000 watt Buffalo tools sportsman ,but green and has a near useless 12 v dc. i just had to put a new ignition coil on.
@mwambinguphilip554 жыл бұрын
Thanks alot tomorrow I'll check my generator has the same problem
@life_motived_corey4 жыл бұрын
My carburetor cap was very dirty what should i clean with
@mygiguser4 жыл бұрын
Corey Brady gasoline and a rug
@life_motived_corey4 жыл бұрын
@@mygiguser thanks i end up looking up information i got some carb cleaner. But your video helped 1000x to find the issue was in the video my actual problem.
@ninamaxie40016 жыл бұрын
can get my 3 month old 4000 predator too revv up was working fine carb cleaned changed oil cleaned. spark plug still only. idels was working fine last night please any intel would be wonderful thankyou have a wonderful day.
@LearnChemistry4 жыл бұрын
Hey man, i have dual fuel generator i mean generator use natural gas and petrol as fuel . now generator works well with petrol but not with gas, what will be the possible problem with my generator, please tell me.
@mygiguser4 жыл бұрын
PUBG Gamer that’s even easier, i can’t believe you have a problem with that. Either the hose is clogged, or the pressure regulator is damaged.
@LearnChemistry4 жыл бұрын
@@mygiguser thank you for your reply, can i send you my generator's video? Because here mechanic didn't correct it. :(
@josemontes622411 ай бұрын
Thank you god bless you
@Cashpots5 жыл бұрын
The second thing to try (after checking there is fuel and it's not flooded) is to check the spark plug.
@Frostytravels7 жыл бұрын
turn gas valve off....when storing...and run until gen stops. This will empty the float bowl...so as not to collect water and prevent corrosion of old gas. Sta-bil should be used if storing for longer than a week.. Gas looses octane quickly.
@ellisritchie66865 жыл бұрын
H
@azizissa3087 Жыл бұрын
What would happen if water mixed with fuel, and how to behave? Thanks
@mygiguser Жыл бұрын
Drain all the old gas first, and then use new gasoline before you start the engine.
@luisangelgalarraga6 жыл бұрын
No hay que dejar con nafta el caburador y / o tampoco la nafta mucho tiempo en el tanque , forma acidos en evaporacion y se destruye el mismo , mirar la bujia antes de arrancar por mucho tiempo, le hace bien , a medida que el generador cumple horas de uso se hace mas visible el desgaste y el consumo de aceite , que sube o bombea el piston ..... mrar el aceite , con nivel de piso a 0.... el aceite , tiene que salir , por agujero tapa... ahi esta bien.Tambien ver si la boya del carburador esta alineada a la base del mismo.... N muy arriba , ni muy abajo...Ver si la llave de encendido esta en buenas condiciones probar directo , juntando los cables ,, ver si cae nafta es lo primero CHAU
@earnestconstructionlimited91125 жыл бұрын
My generac leaks oil from the oil pressure sensor what could be the cause
@mygiguser5 жыл бұрын
Broken sensor?
@Nando_6 жыл бұрын
most of the times, the needle get stucked and don't let the fuel get into the carburetor... especially on 2 strokes engins, because oil residue turn into some kind of glue
@mygiguser6 жыл бұрын
Nando Z great, but this is a four stroke engine.
@user-lp1ev7ku1f Жыл бұрын
Can a generator work without turning on the fuel tap
@mygiguser Жыл бұрын
no
@earlaragon4913 жыл бұрын
Hey mine don't start I even cleaned carburetor and remove the wire sensor for oil all it does is run for like ten minute and shut off what to do next I have been trying 4 days now
@mygiguser3 жыл бұрын
Earl Aragon the vent in the gas cap clogged?
@ns671fr6 жыл бұрын
Not sure what you did here, you cleaned a clean carburetor now it works?
@mygiguser6 жыл бұрын
ns671fr there was a tiny piece of dirt stuck in carburetor. The generator was only a few hours old, ran maybe 100 hours before it stopped working.
@B3AR19867 жыл бұрын
lil tip it worked for me ....the filter in the tailpipe was completely dirty and that wasnt letting the fumes out ... there fore shutting off the engine ......so i clean it and problem solved.
@mygiguser7 жыл бұрын
Thank you. Great tip!
@abrakamjoxmhlanga15516 жыл бұрын
Hie, I accidentally mixed 2stroke oil with petrol in 4stroke generator and tried to start luckily It didn't start so will you please help me.
@mygiguser6 жыл бұрын
Just remove the 2 stroke gasoline, and refill with new 4stroke gasoline. No problem! Thank you for your comment!
@chivosadventures81715 жыл бұрын
@@abrakamjoxmhlanga1551 You should be able to run two stroke fuel in a four cycle engine just as long as it is just one fuel tank without damaging any internals just as long as the fuel isn't too rich. I do it all the time.
@seanhorn21414 жыл бұрын
frank ramon villalobos
@daveparkes85396 жыл бұрын
That was a great video! But what was the problem? it didn't seem to be diagnosed
@mygiguser6 жыл бұрын
Well in this case metal shavings were blocking one of the jets. This must have happened in the production process of the carburetor. It was working for at least 20 hours, as it all of the sudden quit, and then never started again.
@mikemason29762 жыл бұрын
Followed exactly.. Still not running or even almost starting. Of course in the middle of the night with no power. Only thing left is to try new plug. It looked fairly clean when i took it out to look..but thats the onoy thing left it might be... Plenty of gas, blew out the carb holes.. Nothing.
@mygiguser2 жыл бұрын
oh man, sorry to hear. my power is out too right now. what are the odds. did you check the oil? there is a switch that turns it off when the oil is low!
@mikemason29762 жыл бұрын
Just did per your advice.. No luck there
@mikemason29762 жыл бұрын
Forgot to add reply... Took apart carb again, used air compressor to blow out holes.. Works like a champ. Now at least I know how to take it all apart.
@billrundell20974 жыл бұрын
Use Starting Fluid first.
@billmoyer32544 жыл бұрын
always!!
@jojojaja85347 жыл бұрын
tip to easy start. just put quick start propane gas into the chalk filter. and thats it. also you cn use the lighter propanane gas if you not have the quick start be sure to adjust the level of the lighter to high to give more gas to the filter .
@PeterLawton3 жыл бұрын
"chalk filter"???
@duramax786 жыл бұрын
I have same generator, it only runs on choke and smokes like hell, then when I flip it over to run it stalls, can anyone help please.
@robertschnog40584 жыл бұрын
Clean your carburator. Its jet(s) are clogged. Thats why it only runs on partial choke. To avoid this issue, run your generator at 40-80% load every month for at least 15-20 minutes. Then disconnect the electrical load, close the fuel valve and let the engine stall by itself as gas runs out. Better yet is to drain your carburator float bowl completely. Its the little amount of gas in your carburator float bowl that goes bad with time and gums up your jets.
@lemueljohnsabinada7325 жыл бұрын
Need help, I put diesel in my gasoline generator, and its stop working what will i do? I already drained the diesel and put gasoline but its still not working? anyone can help me here? :)
Really didn't have to take the carb off to do that. But it looked simple enough.
@haydergfg67026 жыл бұрын
Good job thank
@mahindershinghthakur.mahin62775 жыл бұрын
Hind ma vido dia
@poultrypal6 жыл бұрын
You need air, spark, fuel ! Pull carburator before spark check ?? No ! If spark , fuel, clean air filter , problem could be old gas ! Spray starter fluid into unchoked carb, close choke, try starting ! This should work for almost all starting problems !!
@deborahwalker10605 жыл бұрын
Will to much oil cause it to smoke bad?
@mygiguser5 жыл бұрын
Possible, but it is easy to check, or is it not?
@raymondgarafano86043 жыл бұрын
About the biggest issue with ANY generator is leaving the gas on. ppl see the ignition sw. or engine switch that says run/stop. they flip engine stops an that's IT no worry about leaving gas in the carb for months at a time with no stabilizer in it. YUP that'll send Gertrude in a tizzy well that is what I call her. When I work on a gen 1st things is to check oil, how much and the quality of it. mostly every engine has a low pressure oil shut off, a yellow wire from R. side is wired into the ignition magneto so if oil pressure decreases, mag is shorted and plug will not fire. If gas has has not been left in the carb, make sure oil is within a two threads of dipstick before it starts to run out and unhook the yellow wire. Good chance engine starts, if it shuts down when ylw wire is hookt, oil sensor switch is probably stuck, unhook wire and restart, keeping eye on oil. possible oil sw. will free up inside and allow engine to run with it hookt up as it should be. other engines have a little cube with 2 wires leaving it, This is either a diode or quite possibly a transistor.