Bios Password Reset | HP ProDesk 600 G4 DM

[@jsnuk3556]

I don't even own one of these (yet), but I think your problem-solving videos are EXCELLENT!!! Thanks for being so helpful to the 'community'.

[@TheEuropeanFox]

Thanks man, I long-term-borrowed one of these from my old workplace and this was surpsisingly easy, lol.

[@ratimor3093]

I'm very grateful for this video. All worked for the HP Elite Desk 800 G4 Mini. Thanks.

[@viproar1]

Excelente, muchas gracias!

[@bontibayan]

Thank you so much, your steps also works for HP prodesk 400 G4 mini. I was able to reset the POST power-on password.

[@user-c2c4x]

thank you from Brasil

[@johanmaldonado1032]

Man, you the best, thank you so much from Ecuador

[@gusibiza]

@My IT Workshop Wonderful tips!! Do you know if there is the same procedure for an HP Prodesk 405 G6?

[@MyITWorkshop]

Hi, Depending on the model the reset pins are located in different location on the motherboard. The process is similar after that. Now, newer/some models might not have the reset pins at all. In that case getting in contact with HP Support will be the way to rest the bios/admin password. Hope it helps Ty for the comment

[@gusibiza]

@@MyITWorkshop I have spoken with HP support and they tell me that in this model you have to change the motherboard and it costs more than €400

[@MyITWorkshop]

@@gusibiza WOW! I did not expect that.... Dell support, if the device is under warranty, will give you a "master password" based on the model you have to access the bios and change the admin/bios password. Sorry to hear that :/

[@cybersamiches4028]

Thank you

[@fergusonj23]

Hello! Thank you so much for these guides! How would it be for a HP prodesk 400 G6?

[@MyITWorkshop]

Hello, I think i found the manual for that model here: h10032.www1.hp.com/ctg/Manual/c06506645.pdf Based on that, item 17 is the jumper for the password. If true, then the process would be similar to the one in the video. Hope it help Ty for the comment!

[@diegoarturopachecosolano9197]

Works on EliteDesk g4 705

[@abobabop]

Thank you very much! You saved me a lot of time.

[@dusky_dx]

You are amazing bro

[@Андрей-ы1ш1ч]

Thank you very much! sep.2024

[@bbjimmi]

Thanks! I'ts worked.

[@noureddineazalo5907]

Merci beaucoup

[@ThePjay91]

Thanks, on my G5 version it was the same!

[@pianistul21]

i removed the jumper and still asking for a password

[@ThePjay91]

@@pianistul21 Disconnect the power supply and Reboot several times. It actually shows a code that you just have to enter again, for me 2 times. Should work then.

[@Aliens4world]

thank you so much....

[@vickihenderson8468]

Will this be the same process for the HP Elite Desk 800 G4 Mini

[@MyITWorkshop]

Hello, the process is similar, the jumper might be located somewhere else on the motherboard in your model and the key to access the BIOS might also be different. Hope it helps. Thanks for the comment.

[@francisso3215]

it works perfect in G4 mini

[@dentalinsuranceadvisor7299]

It looked like it worked before you put the jumper back. Do you need to replace the jumper at all?

[@MyITWorkshop]

Hey, It works without the jumper. However if u leave it out, the next time you turn it on it will show the same message. Hope it helps ty for the comment

[@melvinpenones1607]

HI IS IT THE SAME PROCESS AS 600 G5?

[@johannesk8242]

Yes

[@mikkoolmillo6734]

Hello, i just got my HP Prodesk 400 G7 the small form factor version. will you please help me on finding the PSWD jumper on that model? thank you so much

[@MyITWorkshop]

Hello, I have the manual here: h10032.www1.hp.com/ctg/Manual/c06913105.pdf -> page 94. It mentions "Clear Password Jumper" HOwever, there is no pic of its location on the motherboard. It if does not have a "pass reset jumper", try: shut down the computer, disconnect everything from it, press the power button for 20-30 secs, connect everything back and try again. In many small models HP removed the jumper. Hope it helps Thanks for the comment!

[@mikkoolmillo6734]

​@@MyITWorkshop Thank you! sadly I coudn't find the password jumper because this is a small form factor PC. I shall try and do that trick to hold the power button for 20-30 secs. thank you so much for the reply.

[@mikkoolmillo6734]

@@MyITWorkshop I also contacted their customer support and sheesh the quotation for changing the motherboard is 50% of the full price of the unit. hope you could help me. thank you so much!

[@ratimor3093]

oh thank you so much!!!

[@noguardrails47]

I'm loving your videos ( just subscribed) . Would any of your videos help me reset the admin bios password on a HP 600 G6 small form factor desktop ( 10th gen) ? I'm able to see most of the bios information ( specifications etc) and i can access the boot order, but no usb device ever shows up ( because of the bios lock) . So it doesnt have the power on password, just the admin bios password. Would you be able to point me in the right direction please? Any help would be much appreciated sir !

[@MyITWorkshop]

Hello, I haven found a jumper on that motherboard model . New HP/DELL models don't come with the reset jumper anymore. Maybe i was looking into the wrong manuals. I leave the hp official website here: support.hp.com/us-en/drivers/desktops You have to type your serial number that can be found in the BIOS or in a label somewhere on the case. That way it will take you to the correct site for that specific model. From there you can check its manual and see if that motherboard has a password reset jumper. Hope it helps Thanks for the comment.

[@ridlerz]

​@@MyITWorkshop if there are no jumpers in the new models is it safe to say if something is passworded and you don't know it then you would need to go to hp for release?

[@EinOwl]

Can you help with HP ProDesk 405 G6 DM please? Same problem with bios

[@stephlej9859]

Hello, do you have a solution for a prodesk 600 g6 mini because there is no jumper but 2 holes marked PSWD but nothing happens when I put a wire

[@ridlerz]

My motherboard is L86378 the newer version to this the outer case is black and dark grey whereas this is black and light grey in this video. My mb has a pswd area just on the edge of the heatsink but no pins just two metal contacts where two pins should go. Any advice appreciated

[@AlmagneJanDelarmente-ef9yh]

Hi! can you reset bios password on hp prodesk 400 g6? i can't find the jumper on it. Thanks!

[@KopiItem-xv9px]

I have same problem for my PC (hp prodesk 400 g6), is the solution the same as yours?

[@Pajbz]

Hey bro did you know how to enter to the bios in Prodesk Mini 600 G5 menu I tried with “Esc” and “F10” and all but doesn’t work

[@警长小黑猫]

May I ask for HP Elitemini 600G9? The mainboard do not have jumper😅

[@benonemusic]

Thanks for your video--I have liked it and subscribed! I recently purchased a used Elitedesk 800 G4 and had a question. I have flashed an image file of Batocera (a Linux based emulation platform) on my internal M.2 SSD and keep getting the "Selected boot image did not authenticate error." (This also happens to the Batocera images I've created on external USB and external SSD.) My G4's BIOS and firmware is up to date. I have tried to disable Bios Sure Start and disable Secure Boot. I enter the codes and restart. But the BIOS keeps returning to Secure Boot enable. The "Clear Secure Boot Keys Option" is always greyed out and I cannot change it. I have posted a question in the HP Support Community and no response. I thought I'd ask if you have any suggestions since you seem very knowledgeable about how this hardware works. Thank you!

[@benonemusic]

I found the answer to my own question, in case anyone else encounters this issue. When I attempted to disable Bios Sure Start, and disable Secure Boot, I had been entering the codes in my keypad instead of the number keys above my keyboard. It turns out you need to use the number keys above the keyboard for these changes to take effect. When I did this, I was able to disable secure boot. Batocera now works. Thanks again for your channel and for helping so many people.

[@mudmasp]

How about Hp Prodesk 600 G5?

[@mnai9428]

If you have any idea to remove Bios password for HP prodesk 600 G6. I tried some ways of CMOS battery removal but failed. No jumper found.

[@alejandromejia5781]

Pls help! I have a HP Prodesk 400 G7 small factor i5 10th! I can't find that freaking jumper anywhere in the Mobo! Just the switch for the CMOS, would it be because it's fairly modern?

[@GORILLA_PIMP]

Hi i have a HP COMPAQ 6300 SFF And when i try to go into the BIOS it keeps asking me for a password If i clear the jumpers will it get rid of this issue? Ive already tried removing the CMOS and pressing the CMOS button for 10 secs but that didn't fix it

[@lastdayevents9990]

Hi sir How can I reset on 705 G3

[@MyITWorkshop]

Hi, I did a quick check on that model, i see it has a jumper on it. Most likely the process is similar as in the video. Hope it helps Thanks for the comment

[@lastdayevents9990]

@@MyITWorkshop I tried the same process but it didn’t work.

[@flavioportelaroots]

Top!!!!

[@flavioportelaroots]

Thanks

[@flavioportelaroots]

I am Brazil !!!!

[@GloXWrld]

Hey i know this was a while ago but i did all the steps but now its blinking red 3 times and white 2 times i did it with the 5th gen

[@rotchelmartinez7705]

Hi sir help me i have 400 g5 bios password

[@MyITWorkshop]

Hello, I have the manual here, scroll down a little and you will see the motherboard. Based on the doc it has a password jumper, number 17. h10032.www1.hp.com/ctg/Manual/c06489416.pdf Hope it help Thanks for the comment!

[@ignaziomarino764]

hello, I have a hp pro desk g600 g6 mini but I can not find a jumper, can you help me?

[@stephlej9859]

Hello, did you find a solution because I also have a prodesk 600 g6 mini and there is no jumper but 2 holes marked PSWD but nothing happens when I put a wire

[@ignaziomarino764]

No, any solution 😢, please if you will find a solution, share with us

[@steveyo72]

I did the jumper thing with my t630 thin client for the password and it didn't do anything. Password still there

[@zkhanz1728]

HP Pro desk 600g4 boot not found broblum

[@pianistul21]

Bios Admin Password? Can’t be bypassed?

[@r-test3668]

what if there is no jumper

[@formula1maximal211]

I have a hp elitedesk 800 g4 35w desktop mini pc and i can not pass the windows password how do i do that?

[@Willsmith-nk4hi]

Didn't work for me still asking for a password.