Don't Overlook This Slot

[@iknowdawae893]

the five stages of computer shenanigans - what happens if.. - wait what - no way this works- - oh.. s#!t... - OH F&€K

[@HardwareHaven]

Exactly. Baha

[@thisbennyplayz]

True until it doesn't (Alot in my case.)

[@nuvotion-live]

I like your background and intro music :)

[@PancakeSerenade]

Yes.

[@tjh44961]

You forgot the stage when something actually works the way you want it to -- "Hold my beer." The same stage can occur very, very late at night.

[@alexlovett1991]

I've used this slot for an additional ethernet port on a hp prodesk mini. I've genuinely considered making a small pcb to split the different functions for different uses.

[@mell1657]

please do

[@TheTastefulThickness]

Turning the wifi slot into a SIM card slot for cellular internet connection is the #1 most amazing modification that no one feels like they should talk about. This is a high end feature only some business class laptops receive.

[@seawolf7610]

What modules would you use for that ?

[@DMP2923]

A SIM card module?

[@suspiciousstew1169]

How the hell have I never heard of this?!?!? That’s probably one of the most convenient features you could put on a laptop today.

[@OttosTheName]

@@suspiciousstew1169 I think it's more common in rugged devices. Stuff that's meant to be used in a quarry, in the field, by surveyors, etc. are more likely to have these. I think. It used to be a big thing in more high end laptops, but now that most people can get a laptop if they want (as the cheap ones are usable), most people work in the city, every coffeeshop has free wifi and every phone can now be used as a hotspot it's far less common. If you're a little bit older I think you're more likely to have heard of it.

[@MrCodePanda]

@@suspiciousstew1169 Same, that's actually pretty groundbreaking. >.>

[@putraadriansyah8082]

If you're going to use a PC PSU as external power supply again in the future, try to make a USB Optocoupler to trigger the green wire so you don't need to jumper the psu with paperclip and don't need to remove it because as soon as the board powered on/off, the optocoupler will also get powered on/off, and also it will trigger the PSU on or off. Try a cheap PC817 with some resistor

[@HardwareHaven]

I’ll have to check that out next time, thanks!

[@HelipOfficial]

Interesting.......ill check that out too in the future. I never worked on optocouplers before, i heard a lot of it but never understood how it actually works.

[@putraadriansyah8082]

@@HelipOfficial optocouplers is basically a IR LED and a Photodiode in one package. When the photodiode gets ir light, it conducts.

[@Knaeckebrotsaege]

or just... a 5 or 12V relay that needs no other components to do the same? KISS principle

[@putraadriansyah8082]

@@Knaeckebrotsaege yes that would be simpler, and will work fine if the user likes the relay click sound at startup.

[@FCoFix]

Oh hey. I made that wikipedia E key edit. It used to be that it was written in a way that could make people think m.2 E could be 2x PCIe x1 but that was not the case. It is a mix of 2 of the following list.

[@azbesthu]

Coral has dual accelerator card for two separate 1x: CORAL G650-06076-01

[@iXenox]

So no SLI on mini PCs? What a bummer...

[@stevejr777]

You need a common ground thats why it worked when you shorted the both grounds. Anytime to use two different power supplies you'll need to do this. It's not going to hurt anything just make it work!

[@CatalinTabirca]

common negative

[@TheSlyMouse]

As a $1 member it's worth it easily. It's my kind of tinker heavy computer content.

[@HardwareHaven]

Good to hear! And thanks!

[@r_owbot]

I can buy member but I don't have a credit card or online credit card 😭

[@TheSlyMouse]

All good, all the videos are still public at the end of the day.

[@HardwareHaven]

@@r_owbot No worries! Thanks for just watching 🙂

[@gordslater]

When you run two PSUs, it's best practice to bond the case ground to case ground (assuming both of them have metal cases) ...AS WELL AS... the zero volt rails to each other. Keep these seperate - for example, bond the cases with one heavy ground wire. Seperately, bond both 0V rails (black wires, usually) together. In your situation here, I assume you#re using a 19V plastic brick PSU and the second PSU is the $5 metal case ATX PSU, so, being unable to bond the PSUs cases because one is plastic, you simply make sure the black wire of the second PSU is very firmly connected to the chassis 0V of the mini PC, usually the metal case is directly connected to the 0V line. I've guessing that there was a potential differance ("a voltage" to most people) between the 0V rail on one PSU and the 0V rail on the other PSU. The only thing linking the two 0V rails together was the screening earth braid on the SATA cables, so current was flowing on the SATA screen. This sort of thing can cause all sorts of wierdness. It's not so much about mains safety grouding (to anyone in the US), or "earthing" (in the traditional British English sense - electrical engineers really call that equipotential bonding of exposed metalwork. Nope, it's actually more about making sure that leakage currents or noise voltages don't affect both the devices you are powering AND the PSU regulators themselves. In simple terms: "it's f-ing complicated" :) The potential difference can easily occur do to RFI Y-capacitors on the mains input of one or both PSUs, as the caps are never perfectly equal value and also have a inherent leakage current. This is why you get a "tickle" from the DC power lead on some laptop PSUs. For years I've wondered how gamers could get away with running 2 PSUs in the same case to power a huge GPU, in reality, without bonding the 0V rails there coiuld be all sorts of unusual currents flowing across their GPU and through the PCIe (or PCI/AGP/IDE) socket in a similar way to the way your SATA lead was trying to equalize the two independetly floating 0V rails. For anyone running NAS systems with lots of disks and 2 or more PSUs, it was less of a problem back in the day because each spinning HDD had a nice fat metal case and was screwed directly to the mounting rails in a metal chassis. The HDD 0V rail was internally connected at or near the power connecter on the disk to the metal disk case via the PCB mounting screw pads. But recently, as people do this with SSD and their plastic cases, the problem is occuring on 2-PSU DIY NAS boxes too.

[@trrjecto4459]

Only for my understanding, it will be enough if I connect the PSU case to the ProDesk case? At the PSU a screw at the mounting bracket with a wire and then the attach somewhere at the ProDesk case, like a case screw?

[@joshuahzg]

I didn't understand anything but thanks for the explanation 🎉

[@gawizard4980]

@@joshuahzg essentially, 2 PSU's = share common ground the second PSU couldnt share common ground with the HP Mini

[@ALittleBitOfEverything-wd9ee]

I am very grateful that you shared this and I stumbled onto this information before I started new server build! Thank you!

[@JustinEdge-i3i]

@@ALittleBitOfEverything-wd9eeyou technically don’t have to do that as long you have a powerful power supply having two would waste and you can turn any pc into a server

[@AliceC993]

As others have commented here, I would be extremely cautious using multiple power supplies in a situation like this. I've even had issues using external hard drives on test benches if things aren't properly grounded.

[@MichaelThompson94]

I'm using one of these Coral edge TPUs with Zoneminder on an Intel Nuc, have been for maybe 3 years, and it's brilliant.

[@sparriot]

One crazy venezuelan here converted it to and adapter to connect a graphics card in a atom laptop. Awesome video.

[@garrytuohy9267]

Thanks!

[@Agret]

I was recently working on an HP SFF pc that only had 2 sata ports, one was in use for the DVD drive and one for the internal hard drive. We added a 2.5" SSD to it but there was no extra sata port. I found on Amazon you can get a little adapter that is the same size as a wifi card that has 2x SATA ports on it so I put that in there and connected the DVD drive to the expansion board and put the SSD into the motherboard. Works awesome. The PC is used on Ethernet so didn't need wifi (and the slot actually came empty on this model of SFF PC!)

[@Luqinity]

Hello! I have been researching about this adapter for awhile but just can’t find any feedback on how reliable the adapter and max speed. Since you are using SSD, I was wondering if I could get some feedback. What’s the transfer speed and have there been any issues? Thank you

[@michaelseditor]

I used my wifi slot to go the cheap eGPU route for my laptop. I even made a video about it! It's pretty old now but gives a good look how I did it.

[@ipann6693]

That's so cool!

[@gael_le_coq]

Thanks for showing. I ordered the coral pci a+e key version and after a long battle with my os it's now working like a charm!

[@theusuario-pb5xk]

You can also buy a PCI X4 adapter for the wifi port, that allow to install whatever card you want. In my case (M710q) i use it to connect a sata card with x6 sata ports i found a really cool way to actually power drives directly from the M710q motherboard, so i have x6 3.5 HDD drives connected

[@HardwareHaven]

That’s a awesome!

[@kevinmax101]

l wonder what wire you were jumping to power up those hdds. Cant possiby be the usb headers right?

[@Isaac-X113]

True yes but don't think you can combine the 2 separate 1x links into more bandwidth, you only get a 1x link to the 4x device. Not going to slow down most things but there is a chance.

[@philipjanbaruis7040]

do you have any youtube video for the setup?

[@yissnakklives8866]

There's an expansion card that will give you a full PCIe GPU slot (externally, of course). Lets you run a full sized GPU at PCIe 4X

[@Goonit83]

You’re so chill. I enjoy your content man. 🍻

[@Montgomerygolfgator]

1. That port you removed can actually become a 2.5gb ethernet with an HP module XD 2. You can delid the Ryzen Pro in that HP with a razorblade, and you really want to do it. They actually used THERMAL PASTE UNDER THE IHS, so it comes right off and the stuff they used is awful and dried up. Replace it (i used PTM) and pop the lid back on with another layer and it will run a lot faster, quieter, and cooler.

[@advertentiegolf]

What do you mean with 2.? Because doesn’t it have an intel cpu?

[@Montgomerygolfgator]

​@@advertentiegolfYou're right, I have the elitedesk 705 G4. To be fair, they are pretty much identical inside and out except for an internal header that allows thunderbolt FlexIO in the Intel version (AMD still doesn't have a license for Thunderbolt today) and the CPU under the heatsink. It's still useful information though, the AMD version has some benefits. For example, Bazzite and ChimeraOS which are meant to work as SteamOS for non-steam devices need an all-AMD system to work properly and the 705 works perfectly for that. Just make sure to crack off the CPU heat spreader to prepare the whole thing.

[@miketaylor8576]

Great video. Its common to see people never finding true potential of their computers. There are still people who never tried ssd in their computers.

[@Squidgy55]

I remember buying an SLI motherboard with the intention of some day getting a second GPU... I never bought the second GPU, I just upgraded the whole system to a newer gen that made SLI redundant. I still have the board, might be worth a tinker for some retro benchmarking.

[@brandieboy]

Whoop whoop. New video in the house!

[@screwf4ce1]

Love those septres. I run the S8s and love them. The imaging is insane. Great vid BTW

[@BarneyKB]

I used a 2x sata adapter on a jonsbo n2 which as far as I can tell is the only way to get the maximum 5 drives from a modern consumer itx MOBO. Works pretty well!

[@AndyMitchellUK26]

I'm actually looking at a Jonsbo build and have recently come across a 6 port 2280 M.2 adaptor. Very handy for the ITX boards with 2 NVMe slots as it means you can run an Optane drive on one still for cache.

[@lilblackduc7312]

I shared this with someone else smart enough to appreciate your possible 'ground' issue between the cases of the PSU and computer. Thank you...🇺🇸 👍☕

[@vicolin6126]

Got a HP 800 G4 mini, a newer model that the one showed in the video. Did and experiment with one of those E-key 2.5 gigabit ethernet cards, great fun. Managed to snag an actual Intel-based card (i225) for pretty cheap and mounted it in the G4. Was a tight fit for the E-key card, then the actual Ethernet port (the dangly end like shown in the video) had to be fastened somehow. I managed to get it securely mounted INSIDE the G4 by first of all insulating the metal on it with electrical tape (important), then I used those plastic-coated metal wires you get from packages (I always save those, good to have) and tied the Ethernet port down. There are multiple holes on the back of the PC where you could fasten such wires. The card works great and the port sits flush with the back of the PC.

[@therealjamescobb]

Great video on the m2.E key slot. It would be a great follow up for a Frigate / Coral TPU follow up and how its worked out.

[@JuxZeil]

It's a NGFF connector pinned for M.2 E-key, and they're usually only 1XPCI-E lane at the bus. Good enough for a STA SSD or WI-Fi +/- BT.

[@irongiant1961]

I used this slot for a four port SATA card. A little slow, but not terrible. It's used for the four hard drives that make up the backup in my 40 tb NAS.

[@gelomorn]

Hello can you share a link on what you use? I have been searching for this and cant find anyone using this one. Thanks!

[@Olivia-W]

Mini PC + Coral TPU + Debian + Homeassistant + Frigate NVR. And cameras. AI security camera video analysis for the win.

[@gendalfgray7889]

Can this TPU card be used for other AI?

[@whitebeartigtig]

I had a random 32GB SSD sitting around doing nothing and an unpopulated slot meant for a 4G card. The extra 32GB drive in my laptop is nice to have considering I only have a 250GB NVMe.

[@peppernickelly]

I hope you know that $40 can get you 1tb ssd/nvme nowadays.

[@Foggy404]

Depends on location@@peppernickelly

[@l-e-v-117]

​@@peppernickellyalways nice to reuse old hardware though. Prevent the ewaste pile getting bigger

[@peppernickelly]

@@l-e-v-117 While this is true, computational functions have changed and will continue to change. I personally work from my PC and/or laptop. So quality, speed, volume, and power efficiency are important factors that allow me to get my job finished in a timely manner.

[@RadChromeDude]

​@@l-e-v-117the 250gb ssd could just be used in an enclosure after upgrading the SSD!

[@Jabe_VeX]

0:17 HH has breached containment

[@tanmaypanadi1414]

Alert Alert alert😝

[@johnrickard8512]

My laptop Prometheus has 4 of these slots. Two half height, two full height. I have installed in them a combo Wifi AC/bluetooth card, a Google Coral, A Sierra Wireless MC7700 4g LTE modem, and some no name 240gb SSD for my OS boot drive. It's an older core perhaps, but it checks out.

[@johnrickard8512]

Curiously not all of these slots were created equally. The combo card, for example, will only show its wifi module if plugged into the "Aux" connector but will show both if plugged into the one labeled "wifi". This suggests to me that the former does not have USB connections....which of course isn't a problem for a Google Coral 😁

[@gustersongusterson4120]

Peter's video was really cool to come across! I appeciate the run though of all these devices, thanks.

[@erk_0483]

My HP laptop 14s has a white list, so only special HP wifi cards work in the slot, and whats crazy is that instead of telling me that the card isnt supportet, it just gives me a "defective cooling fan" error and dosent boot until the "unsupportet" wifi card is removed.

[@TurtleWaxed]

Note to self: If using more than one power source, you may need to add a ground strap between them so they are at the same DC ground reference.

[@ich777]

Nice video, actually the first one which talks about that not all are equal since manufacturers are building them differently. Good job! 😊 Btw the Coral TPU driver is also all available for Unraid and the setup process is much easier.

[@thisbennyplayz]

You shuld do a dedicated video about the Coral edge TPU and Frigate.

[@Kehk-in-a-MiG]

I've never heard "SATA" pronounced that way, but I like it.

[@olstar]

3:18 you had us in the first half, not gonna lie...

[@andrewforrest8346]

I actually just bought a mini pc the other day, was able to find a cheap e key to m key adaptor and it worked with an m.2 nvme ssd. I installed linux mint and was able to boot off the m.2, no issues so far.

[@lulsecs]

Regarding the Sata card, maybe its hitting the power limit since HWInfo shows only 10 watts max on it, or just a weird compatibility issue, not totally sure myself but I've seen other comments try to suggest some tips. Really awesome to see people trying this stuff because I was really curious on how it would work. Great video as always, and keep doing what you do! I aspire to be like you and try stuff to see if it works.

[@thebutingtingman8832]

I have tried this in chromebox cn62 but the adapter is flaky, but it recognized the ssd, unfortunately the chromebox had died probably due to incorrect grounding of the psu for sata adapter

[@TheHayruss]

you can use a USB to sata power cable to over come the grounding issues.

[@ikirules]

thank you to do this demo with these cards! I was searching information about it, specific with the 2.5g because in a future I want to do a homelab with mini/micro pcs, but i was'nt sure if was compatible, but with this video I'm more confident to proceed with my project :D

[@nassim99345]

Is the external antenna required for wifi? The wifi card doesn't have signal?

[@David_Quinn_Photography]

you can get an e-key to M and B keyed adaptor for the slot as well, but I went the same route you did 2 SATA ports since the mobo I bought can't use it as a boot drive and I can't use WIFI with treuNAS. can we get a full video on how to set up home security? with a system like this? I plan to do something like this but I refuse to buy cameras that connect over WIFI and report to a could server.

[@ufukpolat3480]

Old Apple hardware could utilize a Broadcom h.264 accelerator called crystal hd which used mini PCIe. These expansion slots are really useful even though very few people realize.

[@henriquehff]

13:45 the hdd only got recognized because there is a common ground between the power supply in the HP pc and the external power supply, the only path to join these two grounds together are the sata cables to the hdd, so yeah, you might run into some issues if you don't have a proper grounding between the power supply's

[@philipjanbaruis7040]

I have this HP Elitedesk Mini PC. And this content right now is what im looking for. I want to use the m.2 e into some storage adapter, to make "wannabe" NAS..

[@Raintiger88]

A few months ago, I bought several B, M, A, E , B+M and A+E and maybe B+E key adaptors (they are packed away) for testing on a latte panda delta 3 and one other MB that I just can't recall at the moment. This was a bit of a flashback to some of the headaches I had while attempting this. I'm reasonably certain that many of my problems were related to the BIOS. Not sure if the devices were whitelisted/blocked in the BIOS or how/why an engineer would even go through the trouble to block and/or enable only certain things, but I do recall having issues getting them to work properly. Adding to the frustration was the fact that BIOS (for the most part) is still secret sauce stuff and I just don't know how they limit and/or allow just certain PCIe devices (or any other device). I can only say that I eventually gave up. I really wish I could have found a completely open BIOS that I could have flashed that would just simply treat any PCIe device as something communicating on the PCIe bus - but that doesn't seem to be the case. Before I ever do this again, I want to find a completely open BIOS that I can configure and flash at will. It really shouldn't be that difficult.

[@ALittleBitOfEverything-wd9ee]

Did you have these experiences using the LattePanda, the other motherboard, or both? And if you don't mind sharing, what are your other experiences with the LattePanda Delta? I am on a tight budget right now, so I am considering getting one of their new Sigma series with the 32 GB of RAM now available and using it both as my main computer for a while and to learn Arduino.

[@Raintiger88]

The only thing I did last year was pull it out of the box and power it up to make sure it was working as expected. I think it has win11 on it and the arduino software in right on the desktop.. I think it's a really cool product and I don't regret buying it. I just don't have the time to learn arduino right now.@@ALittleBitOfEverything-wd9ee

[@PeterBrockie]

Thanks for the shoutout! Love the channel.

[@HardwareHaven]

Ay! Glad to see you here

[@FowlerAskew]

Damn, that Wikipedia page about CNVio is better than the Intel page describing it 😂 I had a hell of a time trying to figure out why my PC wouldn't even power on when I tried to switch from a 9560 to an AX201

[@PeterMensink01]

Great idea. Just tried and now have an extra 2.5G Lan on my mini PC running proxmox.

[@markusTegelane]

If you have questions about what each slot is for, the best place to look is your motherboard's manual

[@markissboi3583]

i collected a few wifis from laptops that do the same m2 slots

[@aliyuabba4575]

That face when everything blacked out was priceless 😂

[@K-politic]

I know Peter, he knows his stuff. I am getting a couple usb corals in a week or 2.cant wait

[@DigitalTalon]

Watching the video and it's clear you've never experienced the thrill of running 2 PCUs together! 😂😂 Reminds me of the good ol' days when I first started mining; we had to make sure they were properly earthed together. Ah, the memories! ⚡

[@VWonder737]

Thanks. Working on a 9th gen, ATX with this slot.

[@7_of_9]

Happy that the Thinkpad X1 keeps the sim card slot accessible outside and sd card as well

[@smorrow]

That's a feature of B keying. I mean, you could do it with other cards, too, but you would need a cable coming off the card to the SIM, instead of breaking those lines out through the slot which is what's happening in B key

[@skymad194]

thank you so much I just built my girlfriend an ASRock b660m-pro Rs with a i5-12600f so we can play some games together and I didn't realize it didn't come with Wi-Fi and I bought a Wi-Fi card and it wasn't working I was very confused until I watched this video and you talked about the motherboard manufactures white listing to only use certain cards I then looked it up for my motherboard and it only uses intel made cards thank you for your help I thought the slot itself just non-functioning and reserved for the Wi-Fi model only luckily its an ASRock motherboard and they keep all there motherboard listings and specs and support even old boards running 2nd gen intel witch is awesome of them

[@evilleader1991]

Holy crap no punctuation

[@itechline2353]

very useful thank you 👍👍

[@Real_Tim_S]

For AI in an M.2 A+E-key 2230 slot, look at the Hailo-8. No affiliation, I just like it better than Coral.

[@sqlazer]

I actually have an m.2 e key nvme drive in my parts bin somewhere. I bought a late 2012 Mac mini a few years back and swapped out the stock nvme drive for a Samsung something or other, and had to get an adapter to do it. The drive I pulled outta the mini was an e key drive. I tried to sell it on eBay but no one wanted it lol

[@7hx89]

Mac mini 2012 does not have any nvme ssd. Some mini 2014 models have. Those Ssds use apple-only keys, not standard b,m or e keys. However there are cheap adaptors to make them compatible with b/m keys. And, such ssds can be used in many macs from 2013-2017.

[@arturosann7016]

Literally had my laptop and my NUC opened up earlier today and was wondering about this stuff when I saw the M.2 Wi-Fi Card 😁 KZbin stalked my brain lol

[@minigpracing3068]

The TPU was probably the one I'm most interested insince Frigate kind of requires having a TPU installed to work. Part of a much larger project for me and not sure when I'll get started on it.

[@tenekevi]

That's not true. I've been running frigate on the CPU for 1.5 years. i5-6400 takes it well, although CPU usage is ~35-40W. Recently they came out with OpenVINO support which reduces overall electricity usage by ~25-40%. You can definitely run Frigae without Coral. It's a bit more inefficient but totally works.

[@ALittleBitOfEverything-wd9ee]

​@@tenekevi I am showing my ignorance here, but does TPU mean Tensor Processing Unit, or something else? And what Operating System(s) does Frigate run on? I am wondering if I could use it on one of the new Single Board Computers that are coming out based on the new ARM processor from Rockchip that has an on chip Neural Processor. Something like the Orange Pi or Cool Pi boards.

[@tenekevi]

Yes, it stands for Tensor Processing Unit. And as far as I know, it's ran under linux. I think it can run both on x86 and arm architecture. That's especially easy with a Docker container. I can't comment on the ARM stuff though. People have ran it on a Pi4 with a Coral TPU attached via USB. A SBC might be ok for a few cameras - 2-4. I think anything else will need a lot more juice to perform the video encoding.

[@ALittleBitOfEverything-wd9ee]

@@tenekevi Thank you very much.

[@tenekevi]

@@Not_Sure-i6o You never needed a TPU. Frigate just works with various degrees of efficiency. OpenVINO is a lot more efficient than a bare CPU but it's less efficient than a Coral TPU. I use both so I can compare.

[@brajanubgan88]

About the 2x sata, if you're going to use 2.5 drives you can wire them to the usb ports for power It may not be the most elegant solution, but it should work as long as they don't require 12v I recommend grabbing molex to sata adapters, cutting the molex socket along with 12v cables and wire it up to an old, broken usb cord, that way you can easily replace it, extend it or do whatever you want with it

[@gordslater]

My own experience is that 2.5 inch HDDs (both spinning and SSD) need only 5V In theory, 3.3V may be required for some disks, but I haven't seen one in the wild. 3.5 inch HDDs require both 12V and 5V though.

[@rexsceleratorum1632]

That is exactly how I powered the boot SSD of my previous server

[@ALittleBitOfEverything-wd9ee]

​@@rexsceleratorum1632 That's both very clever and sort of scary if it was a production server in a business environment. I think that I can learn from you. Do you have a channel or website?

[@ALittleBitOfEverything-wd9ee]

​@@gordslaterIn my ignorance, does modern USB but not version 4 / Thunderbolt have sufficient amperage to power high capacity drives? I know that the new standards designed to be able to charge a laptop can handle up to about 100 watts, and I dimly recall USB 1.0 being specified for enough wattage that it could handle things like adapters for serial and other legacy ports (plus the standard was designed to allow up to 127 or 128 connected devices) but I thought that the generations between 1 and 3.something were fairly minimal amperage? Hence why when I plug my smartphone into the USB 2 port it says "charging slowly" instead of the fast charge I get with a 2.3 amp wall adapter. But I am aware that I could be confused about all of this, and I have not ever really needed to investigate HD or SSD power draws. Thank you very much.

[@rexsceleratorum1632]

@@ALittleBitOfEverything-wd9ee Nothing so dramatic, just my home server in the form of an old laptop (hardware and electricity being expensive by Indian standards). I wanted to attach a few SSD's to it (for RAID) using various shenanigans involving mini-pcie to sata adapters and even a micro-sata to sata cable that I soldered together. I don't have a channel, I'm really bad at documenting things.

[@myjunkarea5808]

I think this video is meant for me. I have a 2012-ish Acer 5750G which has a slot which I can not decipher, may be an E or A type M.2 slot, or a mSATA one. Can't wait.

[@Skyspace187]

I have been using E-key M.2 PCIe for a while now. Mostly converting ebay special board-only Gen 4 or 5 Intel NUCs to turn them into gateway routers for family members and friends. Better solutions than consumer routers off the shelf and much more manageable. Low power, low noise, reliable performance... Yea... People should explore the world of PCIe m.2 E-Key and sometimes you can find some weird B/M key adapters as well. I've even seen 10Gbps adapters, but you'll want to be careful with those, they get hotter than a m.2 NVMe drive. I have used a E-Key cellular card for a family member that had a house in a rural beach area, worked great to make a WAP/Router to monitor a security camera, some sensors and provide internet access when people are using the property.

[@ericp.5533]

Always ground the devices directly! You never know. I personally think it's good practice. Interesting video tho!

[@ChrisDaveGG]

how did you know that I was googling this last week, great video as always!

[@henriquehff]

4:24 I'm using a WD SN740 nvme drive in the wifi card slot as a boot drive for my home NAS (with the J4005DC motherboard), I just had to buy the "M.2 A/E Key Slot To M.2 M"

[@F76986jhg]

When I had a dual-core, I always thought of using the M.2 port, To embark on various solutions, Put gps, bluetooth, wi-fi, npu/vpu, Everything on a small plate to make my computer more usable, Too bad it wasn't I have had and I don't even have to do it, but I leave the idea to brilliant minds to do something like this, and postpone the planned obsolescence a lot.

[@onigvd77]

I’m fairly certain that the mini PCIe slot can be used to add GPUs to mini machines that have no other PCI slots

[@No-mq5lw]

Just a tip: Limine boot loader can help to tie together two completely different operating systems together that want to be the only OS on your system, like Windows and Linux (or FreeBSD). Not super plug and play, as there's no default config file and documentation is fairly thin, but it's super doable to glue virtually anything together with Limine (within reason) and have it stick. I've been dual booting with it between different machines and OS for about a year now, and it's been rock solid.

[@MrBearyMcBearface]

When does Linux ever want to be the only os? Windows is the one that throws a temper tantrum. You have to coddle it to even dual boot with another windows.

[@No-mq5lw]

@@MrBearyMcBearface GRUB can feel like that sometimes

[@ALittleBitOfEverything-wd9ee]

​@@MrBearyMcBearfaceReally, Windows just likes to throw temper tantrums. For any reason. But at least it's not as over the top proprietary as MAC'S, even if they are more stable than Windows. I really, really miss the speed and simplicity of the ancient IBM OS/2 operating system, even if it was completely insecure. But I don't know if that IBM even tried to make it Y2K compatible. They could have easily dominated the desktop market with it, if they could have gotten out of the mindset of not advertising to consumers. It came out years before Win 95, and was so much better.

[@Thewaterspirit57]

⁠@@MrBearyMcBearfaceWindows doesn’t have a temper tantrum, just that Windows and Linux use entirely different systems, so it’s more like both Argue with each other. Both are at, not just windows. Which just shows you’re another incompetent Linux user :/

[@SniperAWP]

​@@MrBearyMcBearfaceI dualbooted win and Ubuntu and windows had over 20 currupted reg keys and the bootloader was messed up, had to spend 2 hours troubleshooting to get it to boot into windows and after installing drivers on Linux it WOSD'ed. Then I had to uninstall and cry in my bed.

[@garrytuohy9267]

I was recently looking for something to use the Wi-Fi socket on a Fujitsu FUTRO-S920 and found a M.2 NGFF to PCI-E Adapter Card to accept an NVMe, which is a nice boost to the mSATA that it came with.

[@xariyx9860]

I transformed mini pcie slot into M2 with adapter, then put some random Samsung nvme - it didn't detect it bcs it had bios from like 2015, I had to mod bios with nvme driver and now I can boot from it!

[@Lilithe]

I got one of those super jank M.2 to PCIe 16x adapters and put a video card in it and used it for my TV for a while.

[@stevenclark2188]

It helps that Intel's standard non CNVI cards use PCI-E for Wi-Fi and USB for Bluetooth. And they're sooooo cheap it's only worth undercutting them to save PCI-e ports on a low-power system.

[@brolydictcumberbatchmontou401]

The Frankenstein computer with two ssd drives made me think of the iconic phrase "It's Alive!!"

[@neongenesis2979]

I've used the EXP GDC Beast Video Card Dock on my HP Thin Client t630 to use an external graphics card using the Mini-PCie/NVMe slot. While it's VERY limited, it's 100x better than the onboard graphics. It's interesting to see a low-power 4 core APU boosted by an RTX 3050. XD

[@rawa9891]

Good job! I found those 2.5 Gb adapters on Amazon, and they work great on the HP mini Proxmox Cluster units!

[@nassim99345]

Is the external antenna required for wifi? The wifi card doesn't have signal?

[@Alex_B1210]

Did you happen to figure out a way to mount them to the case securely?

[@rawa9891]

@@Alex_B1210 it's not pretty, but hot glue works.

[@guffermeister]

I've found the slot useful for non wifi, much like you. With the Dell MFF PC's they have Realtek NIC's onboard. Which suck as vmware ESX 7 or later doesn't support them. Rather than have USB adatpers hanging out, put in an Intel 210 gigabit NIC in to slot. The older dell MFF PC's have a VGA hole, which nicely takes the RJ45 connector. It looks almost factory fit. Vmware 7 or 8 will then install. Once vmware is running, you can pass the onboard Realtek NIC through to an OS to use natively if you want. Is how I did my openense firewall - use the Realtek NIC as the external interface, and use the Intel as the internal bridge, alongside other VMs. I don't have an overly quick internet connection, so not an issue for me with regards to the internal NIC contention

[@nassim99345]

Is the external antenna required for wifi? The wifi card doesn't have signal?

[@zushiba]

I bet the e-key sata adapter was shorting to the motherboard. I'd stick some Kapton tape on the bottom of it before you try that again.

[@AJKammerer]

Awesome video! Was trying to figure out what to use that slot for on my own HP Elitedesk mini. I think a 2.5gbs network card would be perfect. Thanks!

[@maplegroves]

Hey man, been here since 4k subscribers! Love your videos, keep up the good work!

[@HardwareHaven]

Hey, thanks!

[@maplegroves]

@@HardwareHaven Glad you've gotten all of this attention, much deserved haha

[@charleshines2142]

I heard that they used to whitelist like that but don't really any more. I heard HP was one of them that used to do it. I had a more modern HP laptop from the last couple years and upgraded its WiFi myself. I used an AX200NGW and that is even though it wasn't listed as one of the cards that the laptop could have came with if it was a model based off the same motherboard. I just had to get another antenna for it. It only had the cable for one antenna. I just stuck it down somewhere inside the case, it seems asenine to make us mess with the display bezels and do all of that work to get to it. I just made sure to put it where it will not short something. I also taped down the small bit of excess cable but never sharply bent it anywhere. I just needed it to stay in place so it won't move and get pinched when I close it again. I have a new roll of 3M electrical tape for that. The new card worked, none of the computer refusing to boot with it or any of that

[@genethebean7597]

He didn't mention that Coral TPU's are way backordered. Keep that in mind if you're going to go ahead with one! Additionally, consider the dual TPU model since that is typically more available.

[@Niosus]

It's not that bad if you're willing to keep an eye on third party resellers. The stock doesn't last long, but I was able to pick up a TPU in less than two weeks. I did have to buy the mini PCIe one, but that's nothing a cheap adapter from Amazon can't solve. It's fantastic in combination with Frigate. I'm using it to keep an eye on my cats for now, but it's capable of so much more in combination with Home Assistant.

[@genethebean7597]

@@Niosus I was aiming to get a mPCIe one and it took Mouser like 9 months to send me one! I ordered it Aug 2022 and got it Apr 2023. I'm not sure, maybe I should've waited on like Adafruit or something.

[@CamiloSperberg]

The dual one does not work with this m.2 slot, I bought one and ended up having to buy a connector which is installed in the SSD slot, and only 1 of the 2 TPUs are recognized

[@mitchellkear]

@@CamiloSperberg What adapter did you buy? I have a Dell Micro PC that I did the same thing for and the TPU "should" work as my slot should be compatible but it doesn't pick up the BIOS shows the slot as "empty"

[@genethebean7597]

@@CamiloSperberg Good to know! In the vid Mr. Haven said it was dual link but that would not necessarily apply to the wiring or specs of either the slot or the TPU.

[@BrendanxP]

I recently installed the coral dual TPU in my wifi slot, however, it did not work at all. The bios picked it up as a GND device, but it does not show up under the PCIe devices on Linux. I have an "asrock z690m-itx/ax" motherboard, which according to the specifications supports: "type 2230 WiFi/BT PCIe WiFi module and Intel® CNVi (Integrated WiFi/BT)". So if you see this, be aware!

[@windowsvista3193]

POV my 2009 Lenovo thinkcentre m58 without that slot: I have to use a usb wi-fi adapter but at least I have like 10 usb ports

[@marcg1043]

Great inspiration...liked the 2.5G NIC atapter idea. SATA drives not realy practical because those SFF boxes dont offer enough power to run HDs anyway....But still thanks for another great video. For 2.5G is a 2.5G switch sufficient or don't you also need to add a special 2.5G router?

[@milescarter7803]

Lol, that shot of a mPCIe wifi keeps coming back 🤣

[@Backstage_Politician]

This is way better than Linus Tech Tips. This guy has a great attitude and is informative, humble and legit, compared to the obviously toxic psycho-ex vibes of LTT. I've subscribed today.

[@madkvideo]

I didn't know about Frigate, thanks!

[@ghost_of_m403]

Cool idea for a video. Thanks for sharing.

[@zajlord2930]

for me the coolest thing i found was esim or lte or whatever adapter

[@strob5657]

omg i had this exact idea when i was refurbishing a laptop for a customer yesterday. Thanks this came in a pinch lmao this is great

[@MrSanityassassin82]

Maybe it would be a good usecase to use the SATA Card with eSATA Cables

[@jarkkoseppanen899]

2:09 love the steady hands 🤣

[@piousminion7822]

#0:42 You point to the device and say "one of the wifi antennae had been ripped off", but I don't see anything that remotely looks like a wifi antenna was ever there. What am I missing?

[@ASUSTOR_YT]

4:05 What a beautiful switch!

[@HardwareHaven]

Makes for awesome B Roll, lol

[@miyukiyotsuba7379]

I would love a breakout riser to usb and pcie x1 slot.

[@turbojax07]

Another great one that is much older is from the original Mario. The devs found a spot that you could get infinite lives with a turtle shell, but left it in the release because they thought it was too hard to do. They were wrong.