AUTEL IM608 PRO BMW 2011 535i (CAS 4)

[@julioalay7004]

Good video well explained step by step However you should warn everyone that risk of doing a cas3 + through obd, the vehicle you done was not flashed to ISTA-p if anyone tried to downgrade a cas module from ista-p to regular flash there is 70% chances that you brick the cas module

[@MYKEYSAUTOMOTIVE]

Thank you for sharing

[@cooperx2307]

Thats really an important information thank you so much for sharing it! By the way, how can we know that if the vechicle use ISTA-p

[@jinesfeliciano1342]

There's a way to recover the cas via EEPROM , ALSO you can use abrites!!!!!!!

[@keyinminutes3211]

@@MYKEYSAUTOMOTIVE I’d also recommend the importance of maintain battery voltage when doing these. I’ve found it’s just safer to pull the parts and do them on bench

[@MYKEYSAUTOMOTIVE]

@@keyinminutes3211 Fem/bdc is more complex than cas 4 !! Fem video coming soon!! Bench!! Stay tuned

[@markwatson2814]

Watching Mike videos is like being in a class room, thanks

[@MYKEYSAUTOMOTIVE]

Thanks Mark

[@jorgemat8080]

Great video. The im608 is my go to tool 99% of the time . Keep up the good work .Love your videos. As you explain in Spanish also is a great thing for all Latinos, I appreciate the hard work you put in your videos.

[@MYKEYSAUTOMOTIVE]

Thank you Jorge I really appreciate your nice comment!!

[@SMASHERJP]

Hey Jorge, im in Texas and thinking about investing on the im608. Did you find that once you bought it, that there was other things you had to buy to make it work? Like software, licenses, subscriptions to something, etc? What do you estimate the total cost was to get everything you needed to start slinging keys?

[@jorgemat8080]

@@SMASHERJP the im608 comes with 1 year of free updates, after one year its around $900 per year but you may use it without paying, but you not going to get updates for new vehicles or other updates but it still works with some limitations. Its worth the yearly subscription as this tool makes your life a lot easier whether you program keys or use the diagnostics side of it . I own mines for awhile now and still learning new things as I am I self learner (trial and error). Amazing tool . Good luck. Hope that helps .oh one more thing buy it from a autel official sales place, do not buy it from a cheap place as you are not going to get USA assistance if you ever need it.

[@MYKEYSAUTOMOTIVE]

@@SMASHERJP if you want to invest in a autel go for the im608 pro has the most things for eeprom .. your always going to need a different software and programmers becuase one cannot do it all.. i got mine from locksmithkeyless.com tell them Mike from My keys automotive sent you theyll give you a good deal!

[@leetaylor4808]

Awesome as usual Daniel, another well explained great video. There is a lot of confusion about cas4 and fem/bdm systems, a lot of videos don’t explain that the module must have already been removed previously and had keys added to the vehicle in order to add more by OBD. Keep up the good work you are the best at what you do, so keep doing it. Every day is a learning day for all of us, thanks buddy 👍🙂

[@MYKEYSAUTOMOTIVE]

Thnk you Lee Taylor !!🙏🏼🙏🏼🙏🏼

[@mrt-ee1zn]

Hi Lee, what you mean exactly? What you mean need removed before can add key by obd?

[@pouncerminned863]

thats not true- you can use autel im608 to downgrade or upgrade in order to do anything via obd- its similar to ista P on cas3, you basically need to jailbreak the software in order to unlock the functions doing OBD- no need to pull the module

[@edgardavidcespedescamargo6115]

Is it safe to do bmw , Audi or Mercedes with autel im508 ? As this autel do not have the option of maxi flash. Thank you so much

[@edgardavidcespedescamargo6115]

Good question

[@solosolo1255]

to add a key, I did not see that there was an original key in the procedure, is it not needed?

[@josephfranco9387]

Where did you get the fob ??? Dealer or supplier aftermarket ?

[@ernestogonzalez8081]

se puede agregar llave, a un si no hay ninguna llave disponible para poder ponerlo en ON

[@555666jyd]

Ok my question was why did you have the 400 connected????

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@josephfranco9387]

I tried on a 2014 5 series today Cas4 315 frequency .. it wrote the fob to slot 10 but would only crank the car when held up to the antenna coil ( no start) and no working buttons .. was using a fob from International Key Supply … message came up on cars information center that it was incorrect key .. called Autel tech support .. he tried remotely with my IM608 and came to the conclusion that we would need the ISN # and the only way to get it is to remove the CAS module and program using the G Box .. problem was the module can only come out if intake manifold was removed to get at it as per the tech rep .. I was not doing that .. my thinking is maybe the car didn’t like the International Key aftermarket fob … would like your opinion … which version fob did you use in this video ?

[@MYKEYSAUTOMOTIVE]

I only reply to members my apologies.

[@josephfranco9387]

@@MYKEYSAUTOMOTIVE how do you become a member ???

[@veylaamata7178]

Muy bien explicado, gracias por hacer el video en español👏

[@MYKEYSAUTOMOTIVE]

Gracias a ti! Bendiciones!!

[@cerrajeriatotalgt2380]

con im508 se puede hacer tambien o necesitamos alguna otra cosa? im508 no trae el j24..

[@kingslyfru5988]

Please I didnt understood was the car original key missing?

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@dannym.2225]

Muchas gracias por tus videos, te tengo una pregunta, en el momento de hacer la programación de la llave nueva tenías la llave original del carro serca?

[@MYKEYSAUTOMOTIVE]

Si

[@stanghp1]

Hi, great video. Question, on a 2011BMW 750i all keys lost, you need the 'G-box' to add a key?? Thanks for your help.

[@MYKEYSAUTOMOTIVE]

Some vehicles obd is possible

[@danielf1016]

Ya tengo mi autel y estaba esperando tus videos con este scanner gracias

[@MYKEYSAUTOMOTIVE]

Gracias a ti amigo!!

[@danielf1016]

Tomaste clases para hacer bmw?

[@MYKEYSAUTOMOTIVE]

@@danielf1016 si

[@danielf1016]

@@MYKEYSAUTOMOTIVE en donde te tomaste las clases me interesa,

[@MYKEYSAUTOMOTIVE]

@@danielf1016 www.americankeysupply.com/product/bmw-simplified-educational-dvd-dal-10007

[@solosolo1255]

why did you choose to add a key and not AKL ? because you didn't have a working car key

[@MYKEYSAUTOMOTIVE]

Hello for priority commenting please joing our members club!

[@wilbersanjur6704]

A parte de programar llaves que otro tipo de funciones tiene o que mas puedes hacer con ese equipo

[@MYKEYSAUTOMOTIVE]

HOLA 👋🏽 para comentar con prioridad, ¡únete solo a nuestros miembros! ¡Desde una computadora portátil o escritorio al lado del botón de suscripción! 🙏🏼❤️❤️ gracias

[@danielzaytsev644]

how do you know what frequency remote? call dealer and have them look up the vin?

[@danielzaytsev644]

would really like to know!

[@JamesValentineBaja1000]

I added a key and it asked as the original keys.... Intermittent start w/o putting key near Coil...? :(

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@pacoyoscar7200]

Muchas gracias por seguir brindando tan buena información

[@MYKEYSAUTOMOTIVE]

SI AMIGO GRACIAS A TI!

[@havealittlefaith5614]

Is this akl ?

[@Peter-hw1yx]

My question is can you show us what you mean by jump cables? like if it dies you quickly jump it and finish the process? or does your jump cable stop it from dying period? If it stops it from dying period... can you show the process and gear you used for that? thanks

[@manuelvega6350]

What is the process of doing this with the autopro pad g2 turbo?

[@MYKEYSAUTOMOTIVE]

Hello 👋🏽friend! Thank you for watching please dont forget to become a member of our channel for priority commenting! Thank you🙏🏼❤️

[@AbzKes]

Mike thank you for making the time to make and share videos like this. I am in a similar situation with trying to write a key via dump, however it’s for the FEM on a f20, cut a long story short, a previous locksmith tried writing a 434 mhz key on a FeM that was meant to have a 868 mhz don’t know if they tried to downgrade to make it compatible with there own key programmer, as the FEM is programmed as a 434 now. Iv preprocessed a replacement FEM and manually input frequency ISN and VIN from dump as I got ISN from DME via gbox. Every time I attemp to write key it would tell me the password is incorrect , even though secret key , ISN , ews5 is exactly the same. Any advise on this ? Thank you

[@kylen.6742]

Love the taped up airbag.

[@MYKEYSAUTOMOTIVE]

😅😅😅 haha right!?

[@cerrajeriaoeste224]

hola colega excelente video ...son reutilisabres esas llaves de bmw?

[@MYKEYSAUTOMOTIVE]

Hola 👋🏽 amigo! ¡Gracias por mirar, por favor no olvide convertirse en miembro de nuestro canal para comentar con prioridad! Gracias 🙏🏼❤️

[@infoservisercar5344]

Hello, thank you for teaching this beautiful trade, I only have one question when you say Jumper, what do you mean? Would you explain to me? Thank you

[@MYKEYSAUTOMOTIVE]

excuse me i meant to say battery stabilizer to keep the voltage up!

[@josephmomma1702]

Is there a machine that will work with a 2017 BMW 540i

[@MYKEYSAUTOMOTIVE]

i heard autohex is preety good with fem/bdc..obd programming but it riducously expensive

[@mattlebrun6601]

where are you learning to do this at? you have come along way. nice job..

[@MYKEYSAUTOMOTIVE]

Thanks Matt!! All new knowledge im picking up from this guy!! Hes amazing!! kzbin.info Check out his channel!!

[@wojciechbielak4126]

I have the Autel IM508 + XP400 PRO, what do I need to program new key for BMW f34 2014 (cas4 of course)

[@Nikos_Tsavalen]

I have this question to

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@jimmyjordan4827]

Hi How do we know the frequency?

[@morganrecovery6832]

New to key programming; Is there a list that tells you what keys are interchangeable and what keys fit what year range and model?

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@oscarpina9966]

Es el mismo proceso para 3 séries ..?

[@MYKEYSAUTOMOTIVE]

¡Hola amigo! ¡Asegúrate de unirte a nuestro club de miembros para dar prioridad a los comentarios! puede unirse desde una computadora de escritorio o portátil al lado del botón de suscripción, ¡verá el botón de unirse! gracias 🙏🏼🙏🏼❤️❤️

[@oscarpina9966]

@@MYKEYSAUTOMOTIVE como me aseguro que estoy enrolado

[@hassanhakmoun6620]

Great job explaining the process, I have IM508+ XP 400 PRO what do I need to program Keys for BMW ? thank you 🙏

[@MYKEYSAUTOMOTIVE]

Diagnostic tool!

[@MYKEYSAUTOMOTIVE]

Jbox!

[@hassanhakmoun6620]

@@MYKEYSAUTOMOTIVE I don’t know what do you mean, I have the IM 508 + XP400 PRO , what do I need to program BMW Thank you 🙏

[@prolocksmithconnection1448]

IM508+XP400pro + GBOX + IMKPA is the same as IM608 pro the only thing missing is the JBOX which is not compatible with IM508 that meaning it’s not needed. IM508 with all the add ons does the same thing. Software is the same. Cheers

[@jamescc2010]

For you experienced Locksmith, I’ve heard that it’s better to always do BMW on bench instead of OBD regardless to reduce risk to damaged ECU. Is that true?

[@baljitathwal3285]

Better to do on BENCH

[@segounlocks5029]

It's better not to be done because it's designed not to be done. Euro cars come from a factory with all their keys preprogrammed at the dealer.

[@validhamidi4934]

Is the im608 the only programmer that you can use for European cars? And is it the most simple one to use or can I use different programmers?

[@bettyhartlerode6153]

I'm so greatfull & excited that your videos are bi lingual. Much appreciated. I don't understand what's going on mechanically,but my guy dose. Thanks look FWD. To more videos

[@MYKEYSAUTOMOTIVE]

Thank you !! Appreciate the support!!

[@michaelpast19]

Do I need internet access in order to program the smart key fob ?

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@ronaldrada6548]

Good translation bro! Way to go.

[@MYKEYSAUTOMOTIVE]

Thank you Ronald

[@javieralejandrodiazvera1955]

Exelente trabajo felicitaciones

[@MYKEYSAUTOMOTIVE]

Gracias amigo!

[@Cali415]

Wow brother! These are the vids I’ve been waiting for! I’ve learned a lot from your videos, God bless you! I know there’s salty locksmiths out there who probably hate that you’re spreading this type of information, but I am so glad there are good-hearted people like you out there. I’m progressing in this field with you my brother so thank you very much 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼

[@MYKEYSAUTOMOTIVE]

Thank you brother God bless you!!

[@juancarlosriveraespinosa5439]

Felicitaciones y muchas gracias.consulta son lla e originalez o sirven las chinas? Desde Chile .gracias

[@robertnieto3731]

I agree sir! Everyone around me tries to hold me back! These videos are a true blessing!

[@scannerhospicio7435]

@@robertnieto3731 no ocupaste el xp400 para programar?

[@georgepats2262]

There is no video explaining why j flasher is needed. Especially in European cars. Isnt the im508 608 ok when plugged directly to the obd?

[@MYKEYSAUTOMOTIVE]

The im608 never goes plugged in straight.. thats a good way to fry it... and that's something that is always mentioned.. the im508 yes .. but thats only good for non European models..

[@MYKEYSAUTOMOTIVE]

The j flasher is the diagnostic tool .. it can gather and read information from the vehicles modules.. something that no other scanner can do .. it helps with programming bmw .. Mercedes.. and other European vehicles

[@MYKEYSAUTOMOTIVE]

The j flasher is a real vital tool..

[@charlessims1076]

excellent video as always. If you have the OEM key, but the FCC ID is worn off or missing, how can you find the correct FCC ID and signal information?

[@MYKEYSAUTOMOTIVE]

You can always check under vehicle information on the autel im608 it will tell you the fcc id and frequency!

[@charlessims1076]

@@MYKEYSAUTOMOTIVE That's awesome! I never knew that, will the IM508 do the same, as I don't have the 608?

[@jewelcitylocksmith9240]

If i have an autel 508 do i have to still use the maxi flash

[@MYKEYSAUTOMOTIVE]

Yes

[@tomking3942]

Did the emergency key code pop up in the car info?

[@MYKEYSAUTOMOTIVE]

No :((

[@CeeeRock1]

Excellent 👍🏽. Please how about for FEM add key

[@MYKEYSAUTOMOTIVE]

Great suggestion!

[@richardbarratt5800]

Got my brand new im608 pro with advanced eeprom kit and Toyota emulator plus gbox 2 sitting right here next to me. Im doing the updates now.

[@gerryjimenez6125]

Mike what is the jumper that you mention that needs to be connected to the battery, so It doesn’t go down? Does it come with the im608 pro bundle? Or is it a separate charger to keep battery voltage up? Can you be more clear on this point? Love your videos thx for making and sharing.

[@jorgemat8080]

Car battery maintainer to keep car battery voltage above 13 volts you need that to have a smooth process.

[@EstebanAlvarez-ck7ph]

Una pregunta, tenías otra llave funcionando ?? Y solo añadiste la llave nueva?? O tenía todas las llaves perdidas ?

[@MYKEYSAUTOMOTIVE]

Tenia una llave ..

[@llavesybeeperstommy2946]

you used a regular battery 🔋 jumper starter or did you use a stable power supply?

[@MYKEYSAUTOMOTIVE]

Anything that will keep voltage above 13.5

[@muhammadfaziz1441]

Hi How to pul isn code from egs moudule through i608 autel for 2008 bmw 650i

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@gabytro]

How can I put 13v in the battery?

[@MYKEYSAUTOMOTIVE]

Use a battery maintainer

[@ferminpineda4825]

Me caes me caes de a madre saludos de Maryland bro i like You programing bro

[@MYKEYSAUTOMOTIVE]

Fermin muchas gracias!

[@dashtyATG]

Yes boss Beautiful job I've to do 1 with my IM508 & xp400 pro soon

[@MYKEYSAUTOMOTIVE]

🙏🏼🙏🏼🙏🏼

[@cooperx2307]

Nice video Mike, super clear and this is first time to see BWM CAS4 IM608, very nice that we can add key through OBD, thank you Mike!

[@MYKEYSAUTOMOTIVE]

Hey Cooper thank you yes ,this is a process i wanted to do but if it has never had keys added it rather be done via bench..

[@cooperx2307]

@@MYKEYSAUTOMOTIVE Copy that! Thanks for information again!

[@MYKEYSAUTOMOTIVE]

No problem brother! Have a great day!

[@cooperx2307]

@@MYKEYSAUTOMOTIVE u2!

[@mattlebrun6601]

@@MYKEYSAUTOMOTIVE how would you know if it has had keys added before? before you start this process?

[@Dgon323]

Where in California are you located?

[@MYKEYSAUTOMOTIVE]

Los Angeles

[@BruceAllentools]

You NEVER put a jumper on the battery directly!!!! Put it in the connectors under hood unless you want problems.

[@MYKEYSAUTOMOTIVE]

💯💯💯

[@MYKEYSAUTOMOTIVE]

Thank you for sharing

[@FathiLayouni]

Hi bro thi is cas 5 all key lost ??

[@martinarrieta248]

Do you give classes

[@DavidGutierrez-zi4dy]

Una pregunta: se puede usar el equipo 608 pro .para programar llaves a domicilio? Gracias. My key.

[@MYKEYSAUTOMOTIVE]

Si amigo ..nomas que se acupa una buen connecion de internet

[@15jcpau]

How accurate UHS keys and remotes are? Thank you

[@MYKEYSAUTOMOTIVE]

Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway! You can only join From a desktop or a laptop next to the subscribe button. Thanks!🙏🏼❤️

[@robbocop33r12]

People say im508 plus xp400+ gives same immo capabilities as im608 pro.But why do i see j2534 used so much with the im608 to do keys??Im508 doesn't have j2534! Does this mean im508 can't do these keys?

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@guty73]

El 508 con el XP400 hace BMW ?

[@MYKEYSAUTOMOTIVE]

Hola 👋🏽 amigo! ¡Gracias por mirar, por favor no olvide convertirse en miembro de nuestro canal para comentar con prioridad! Gracias 🙏🏼❤️

[@gooorgjooon]

Is the im608 just enough to program the same key you used

[@MYKEYSAUTOMOTIVE]

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

[@islandbuildz6380]

Can the im508 do the same thing?

[@MYKEYSAUTOMOTIVE]

Not a chance

[@Дима-ъ4е2й]

Aren't you afraid of flash data to be lost while doing it by obd?

[@MYKEYSAUTOMOTIVE]

When i downgrade yes.. not when doing immo status scan no!

[@israelkrauss153]

Master saludos de México muy buen video una pregunta el internet lo estabas pasando de tu celular al 608?

[@MYKEYSAUTOMOTIVE]

Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️

[@ve6741]

When you have to deal with a CAS4 in an AKL situation, you still do it through OBD or bench work? If you tried through OBD how did it work?

[@MYKEYSAUTOMOTIVE]

Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼

[@ibrahimmeeran7735]

Hi mike how are you ? Please let me know this 1) what is the best jump starter for bmw car while programming the key ? 2) what brand or model number jump starter you using on Bmw car you using this ? Or what jump starter you recommended me for Bmw car ? Thank you

[@MYKEYSAUTOMOTIVE]

Hello For priority commenting please join our members, from a desktop or laptop next to the subscribe button!!🙏🏼❤️

[@ibrahimmeeran7735]

@@MYKEYSAUTOMOTIVE Iam your subscriber can you let me know please thank you

[@steveanderson7554]

Love the video. Is this possible for all keys lost or just adding key ? I’m considering buying a 608, I just bought the auto pro pad and might exchange it if this works for akl on CAs4

[@MYKEYSAUTOMOTIVE]

the 608 is not as easy to use as the autopropad .. i would say have both

[@eduardotrujillo-fp7jm]

Excelente video, funcionara para llaves perdidas, gracias antemano, saludos....

[@octavioespinosa2540]

Qué tal , porq dicen q se puede quemar el modulo si lo programas por obdII?

[@MYKEYSAUTOMOTIVE]

Hola amigo por commentarios de prioridad porfavor unete con el club de nuestro miembros

[@richardbarratt5800]

Tell me. you said ms908im is not the same as ms608im. Sounded pretty sure of yourself too. So please explain how you know this?

[@MYKEYSAUTOMOTIVE]

Im608 pro, not ms608im ...brother its not the same ok..simple as that. you saw the issues the ms908 gave u ..if you would of bought im608pro u would have never had that issue with the bmw. never have i ever had an issue with a bmw.

[@mohammadorabi2642]

Can this Cas get corrupted like cas3+ istap version?

[@pepeluchoasencios5177]

hola muy bueno el video te escuche sobre un jumper a la bateria para mantener el voltaje y no perder los datos del coche. De que manera lo aces si se puede una demostracion saludos.

[@MYKEYSAUTOMOTIVE]

Si amigo gracias..

[@javieraguilar894]

Good morning. Are you able to program more than 1 new key? I have a customer who bought 2 new ones and wants them both programmed. Thanks and keep up the good work.

[@MYKEYSAUTOMOTIVE]

Yes sir

[@javieraguilar894]

@@MYKEYSAUTOMOTIVE would I have to do the same process twice to get them both programmed?

[@MYKEYSAUTOMOTIVE]

No

[@georgepatseris5029]

is the j flasher 100% needed ? or can u connect the im608 or 508 directly to the odb?

[@MYKEYSAUTOMOTIVE]

When doing bmw yes you need it..

[@EduardoMartinez-yx3gb]

Buenas tardes excelente video y muy buena explicación, me gustaría saber si se puede programar de la misma forma con Autel m508 y la xp400 o solo con im608 saludos y gracias

[@MYKEYSAUTOMOTIVE]

Hola 👋🏽 amigo! ¡Gracias por mirar, por favor no olvide convertirse en miembro de nuestro canal para comentar con prioridad! Gracias 🙏🏼❤️

[@samueldavidnunez3295]

Si

[@nickab1039]

How you get the code so you cut the key

[@calb9727]

Can you do I xhorse Plus Mercedes Benz or bmw video

[@MYKEYSAUTOMOTIVE]

Yes sir!

[@SMASHERJP]

Hey Mike. Where did you get the BMW key fob and how much should I charge a customer for making a key for them? They usually want to avoid the dealer because the dealer charges a lot?

[@MYKEYSAUTOMOTIVE]

Hey Jp i dont really like to discuss prices but I recommend you call locksmith near you and see how much they charge and then try to do a little bit better than them . I get my stuff from UHS-hardware.com

[@kkaround]

Hey, I did one CAS4 2012 528i, I was able to add key it would lock/unlock doors. It cranks but would not start the car. codes were security kicked in. Do you know how to fix that?

[@pouncerminned863]

did you try reading ISN via OBD? if so you probably triggered transport mode

[@Kaiser_Dino]

Wonderful video as usual 👏 Is it the same procedure for the e60 as well? And there is any other procedure for the bmw e60 ? Thank you for your help

[@MYKEYSAUTOMOTIVE]

Its a bit different but i will be uploading a video about the e60 today !!thank you

[@Kaiser_Dino]

Oh wonderful can't wait to see it !!!! You did a amazing job 👏🙌❤

[@kinanhigh2317]

Thank you for video brother and god bless you, i want to ask if this way run with car key lost? Cuz if that is true the ignition position 2 will not come and the maxisys will tell you that message (cannot connect with the vehicle) so how can i do in this status?

[@MYKEYSAUTOMOTIVE]

I usually turn on my emergency lights .. but the machine will allow you to get into the system easy when doing akl .. what programmer u have sir?

[@monsonlockandkey]

How did you determine the frequency of the remote?

[@MYKEYSAUTOMOTIVE]

Its tells before your about to program the keys .,watch the full video

[@LegolasXp]

Nice vídeo brother thanks for sharing, which jumper are you using to keep voltage over 13 Volts?

[@MYKEYSAUTOMOTIVE]

I have a snap on jumper..

[@gabytro]

Everyone says it s risky and you should do it on the bench. Is that true?

[@MYKEYSAUTOMOTIVE]

It’s risky both ways tbh you can ruin it both ways

[@AnzarAnzar]

muchas gracias amigo💐💐💐

[@MYKEYSAUTOMOTIVE]

Gracias a ti!!

[@arkangelmendoza5165]

Donde consigo las llaves

[@MYKEYSAUTOMOTIVE]

Americankeysupply.com

[@stein-arnefalchpedersen2222]

Great video! Much appreciated.

[@MYKEYSAUTOMOTIVE]

Thnk you Stein God bless!

[@gaston50952]

Hoy me subscribi. Muy buenos videos. Cuánto cobras por programar 2 llaves si todas las llaves se perdieron? Si el carro está en el taller. Voy a comprar el scanner. Saludos hermano y buen 2022.

[@MYKEYSAUTOMOTIVE]

Hola, saludos, únase a nuestro club de miembros para comentar con prioridad. ¡Gracias! ❤️🙏🏼

[@CarlosRodriguez-ie6oo]

​@@MYKEYSAUTOMOTIVE saludos hermano como me uno al club

[@reynaldoelizondo1732]

Muy buen video, bien explicado, disculpa nunca he programados keys a BMW, pero tenía entendido que tienes q comprar el código o token, para poder programar a esta marca de carros, como al Mercedes Benz???

[@MYKEYSAUTOMOTIVE]

Con el autel im608 pro no !! No acupas tokens!!

[@reynaldoelizondo1732]

@@MYKEYSAUTOMOTIVE a ok yo tengo xtool x100 pad... Quiero comprar uno programador más nuevo, por de hecho ya no puedo actualizar el mío x ya tengo como 3 años con el.. cuál me recomendarías???. Vivo en México y no ahí mucho carros europeos... Lo necesito más para autos comerciales Ford Chevrolet Dodge etc. Pero modelos recientes, mi equipo de quedó en el 2017

[@MYKEYSAUTOMOTIVE]

@@reynaldoelizondo1732 im608 pro amigo !! Locksmithkeyless.com dile que michael te mando!! Mykeys automotive!!

[@reynaldoelizondo1732]

@@MYKEYSAUTOMOTIVE gracias eres muy amable, seguiré viendo tus videos

[@MYKEYSAUTOMOTIVE]

@@reynaldoelizondo1732 gracias a ti amigo

[@jonatandiaz8080]

Hola muy buen video,te hago una consulta sobre lo que dijiste del jumper en la batería,a que te referis?a poner un cargador conectado a la batería para que tenga carga?

[@MYKEYSAUTOMOTIVE]

Si

[@williampaiz8886]

Amigo tengo un problema con un bmw 528i 2008 programe la llave con autel im608. Habren y cierran los seguros también el baul pero no da marcha trata de encender pero no da marcha. Ya le hice una sincronización pero sigue igual

[@MYKEYSAUTOMOTIVE]

Marca la llave del immobilizador en el tablero!!????

[@williampaiz8886]

@@MYKEYSAUTOMOTIVE no. Incluso me boy a revisar llaves programadas t alli esta la llave en el listado de llaves agregada

[@philipelliott1133]

How do you clone a vauxhall corse key

[@MYKEYSAUTOMOTIVE]

What chip is it?

[@SantiagoVargas-gn4nz]

Mi hermano tengo a mi hijo en oregon donde piede comprar las llaves de antemano gracias por tus videos

[@alejandrobravo7068]

Muy bien tu explicación excelente

[@jewelcitylocksmith9240]

Do you work in Los Angeles ?

[@MYKEYSAUTOMOTIVE]

Yes

[@lorenzocruzcayetano5981]

Gracias por su video podría Aser más sobre más VMW q otros cas puede ase gracias saludos desde México

[@MYKEYSAUTOMOTIVE]

Si amigo ! Gracias!!