Nami Burn e2 advance P settings

[@dcmackintosh]

There is still some regenerative braking even when set to 0, you can only disable it by clipping the two white wires in the harness that send the brake lever switch signal to the controllers. The benefit is that you lose the terrible e-brake surge when trying to feather the friction brakes.

[@TheCardinal365]

Setting the regen to 0 helped me out a lot. The scooter stopped doing a really unsettling nose dive and bounce when braking at speed. Cheers for this video mate it was a great help 🤙

[@Andre-cy6yo]

P

[@roderickrobledo6373]

Thank you very much, that was very helpful, it gives me more understanding and more control of my Nami!

[@aznick171717]

Thanks mate that was very helpful. Just got my Nami was very confused about the settings now Everything is clear.

[@briancrowley8741]

Thanks, helped me out a lot. Your explanation was easy to digest.

[@kwazzawazzakushheightseloh9970]

👍🏽 that’s a good one you explain everything properly no joke about that, you have it lock 🎉🎉🎉🎉

[@shanew7361]

Good video, debating on buying one 🤔 May wait until spring 2023 though see what new comes out plus no dealer support in my state.

[@SeekerKnight]

Great video! Well presented and super informative. WELL DONE!

[@clifblake]

Great video, thank you ! Can you tell me how to turn on the USB port?

[@lildeanc]

What are the best brake upgrades for the nami burn e2 max? My one the brakes have a 2cm dead zone! Which means the levers have to be really far away from the grips… I want no dead zone like like my mountain bike so I can make the levers really close… cheers guys for any help :)

[@dannydarko44]

I noticed that mine does the same but I just got it and now I'm moving really fast I'm trying to break and it's like a dead zone and have to really squeeze food. When I go a little slower they get stronger.

[@djhighvoltageoffical]

Love your work Dray !!!!

[@deanahorsman5040]

Thank you good day Vancouver Canada BC❤🎉😊

[@thenatemaxproject]

i found the thumb trigger sticks out way to far have you even taken it apart to make the thumb position kinda mover under the handle has a lot of dead space in the trigger was well wish they sorted out the way they exelerate

[@dcunplugged31]

I believe it's not so much Nami it's a generic part unfortunately and it's used over many scooters. Iv not pulled part mine but have pulled apart another from a different brand. Looks identical but internally the magnet in side has a gap. Unsure as to why maybe safety just incase you might touch it then the scooter takes off with out you realising im not to sure as to the manufacturers motive. But it would be definitely interesting to find out.

[@willjctm1763]

Are the set up on this nami similar to the blast?

[@LL.Johnson]

Have you learned how to change the side light color/function? Got a Burn-E2 today, but the side lights stay constant white even with turn signals on.

[@Aomgar]

What I dont get for p1.5 is What is the maximum speed. i want to limit it to 20mph but I have no idea what percentage is that. And for 5-10-15-25mph

[@mathuhagen420]

Where did you get your phone mount ? Can you post a link ?

[@calebyan6584]

Thanks for the video that taught me how to set these things up.(Youdao Translator）

[@marcussmith4913]

so you can adjust every mode? crazy thats a lot of work sounds like,

[@dcunplugged31]

You can adjust it if you like but comes out of the box pre set well

[@drde4010]

What would be the point of putting more power into the front vs rear? Does it help save power? Is it mainly only for rain?

[@drde4010]

For example if I put 100% on each motor will the power burn quicker? Probably not the right question.

[@websurfer2344]

Can anyone advise where I can this relating to a 2024 Klima?

[@yommudii]

Its the same

[@retrothruster2539]

Help! I have a new Klima and went to change the digital key code which worked fine but I decided to turn it off so I went back to the P setting 14 and saw an option that I thought would turn it off, I clicked on/off to the "off" position and now my screen just says P00 and "off" at the bottom of the screen, everything is locked up and I can't get it to do anything. Any idea?

[@QsilverFpv]

Is this the same for klima

[@matthew8777]

Do you know what the dimensions of the smaller box was for the unboxing

[@abdulmaidin6995]

Hi is it possible to set the regen brake to 1 in D mode?

[@SammyD151]

Well done mate!! 👍🏼

[@ryanprice2105]

Getting mine tomorrow great idea to have C mode pre set for rain conditions wounder who else would had thought of that I will do the same and then have X set as insane full power front rear turbo to max😱😂😂

[@dcunplugged31]

Hahahaha thats what mine is set too X is just fully unlocked track attack

[@ryanprice2105]

It's insane lol I had error 302 few nights ago then it went away so unsure what that is something to do with front controller I'll, take it out for a blast tonight if happens again back to ride and glide shop to fix highly impressive this thing

[@ryanprice2105]

Are u UK based

[@dcunplugged31]

@@ryanprice2105 Australia 🇦🇺 😁

[@benjaminivanoff6834]

Just brought one,doing my homework to see what the best set up is,i want the best handling thing on the road...

[@dcunplugged31]

Adjust your suspension straight way top 10 best thing you can do for your Nami

[@kiwimon3204]

​@@dcunplugged31what's the ideal setting adjustment for suspension from and back

[@gatti493]

Iv just got one , I wish I could just get mine to charge 😕 £3000 and I can't use it ?? Just a green light all the time ???

[@dcunplugged31]

Tryed both charge ports

[@gatti493]

@@dcunplugged31 yes mate

[@dannydarko44]

I'm sure you figured it out by now but usually when that happens it's a bad charger

[@MrDJLeeE]

P1.2 is a misprint in the manual. It is actually for the front motor only (not front and rear).

[@Randomguy-ld7rr]

You sure ? Maybe this why my blast display shows rear motor error code only when choosing lower power mode

[@MrDJLeeE]

@@Randomguy-ld7rr yes I’m sure

[@Mcsteamykettleface]

Is there a way to by pass the speed restrictor without disconnecting the wires

[@dcunplugged31]

No as these wires are hard wired to the controller

[@ortal2013]

very helpful. Thanks.

[@nathanjones6908]

My Nami doesnt show P1.5 or P1.6,how do i find it

[@lildeanc]

I can’t set my front and rear power settings diffeently, if I do the scooter keeps cutting Out, anyone know why?

[@PabloC-x1e]

Hello please I need help: I just bought the 70v 40Ah Burn E3 Max model with NFC boot. It is limited to 15 miles/hour as standard and I want it to go faster. I read the instructions and changed the parameters to the maximum for C and X modes, but it's still the same. Please someone tell me how can I delimit my scooter. Thank you so much!

[@dcunplugged31]

On the left and right hand side of your scooter where the power controller are you will see a black and grey small wire on the side pull it out and disconnect it

[@dcunplugged31]

These are restriction wires put in place to limit the scooter

[@PabloC-x1e]

Thanks so much!!!

[@glenmackie772]

G'day mate how do u make numi go faster am only go 22 but I see people go 40 to 50 still don't understand

[@paulyoo2761]

Remove the two cable on the bottom of the deck, its the speed limiter you can unplug them and you will get full speed

[@dcunplugged31]

Beat me to it but yes spot on

[@muhammadsoleh4108]

Hi i need to know where are you country...

[@dcunplugged31]

Australia 🇦🇺

[@muhammadsoleh4108]

Thanks brother

[@dcunplugged31]

@@muhammadsoleh4108 😁 not a problem at all

[@hamzaMaster]

Hold + not on torbo😮

[@almusic4276]

If you have it on x mode all the time can you burn the battery 🔋

[@NEKRODOG_NAMI]

Good day! on my nami screen, (the scooter is standing) the voltage reading is jumping. ( within one tenth of an example: 75,8\75,9. (8 and 9 are changing all the time) Has this situation happened on your scooter?

[@BryanCuhh-e8j]

I bought a nami burn e 2max from someone online and it has a code. He wont respond to me about it. What can I do ?!😭

[@4partmedia]

😂😂😂

[@andydemetriou-ot2yp]

anyone know how to restore factory settings if I have forgotten password for scooter or is it useless now. I've only had it 3 months ridden it 1 time and now it won't work

[@BryanCuhh-e8j]

I want to know aswell

[@imabot4963]

Mine says error

[@gatti493]

As regards to the understanding part , what he's trying to say is if you don't understand it now, get a fcuking Rabbit lad 😉

[@dcunplugged31]

Bahahahahahhaha

[@markdavis6608]

Very informative but you tend to repeat yourself, and give too many unnecessary details.

[@YatesGates]

Bro 50kg is getting tossed into my pickup so fast. You boys from across the pond sure didn't take after Popeye and eat your spinnich huh