#222

[@bluesoul8117]

どれほど写真を穴が開くほどに見続けたのだろう、ゼロから生み出したにしては見た目が凄すぎる。 見たモノを立体・具現化出来る師匠の特殊な能力の賜物。

[@kenji-plasticmodels]

ありがとうございます😃そんな大層な……😅

[@philipB31]

I am thoroughly enjoying this series you are doing and I don’t think I can over emphasise how impressed I am with your skill, you have a phenomenal eye for detail and incredible patience for such meticulous work. Thank you for sharing.

[@kenji-plasticmodels]

Thank you. Please continue to watch this channel.

[@kazuotaguchi3538]

「結構荒っぽく行っている」と仰いますが、結果的に辻褄があっているところが凄いと思います。 外国の方も感嘆しています。 続き、楽しみにしています^^

[@kenji-plasticmodels]

いつからか分からないのですが、なぜか辻褄が合うようになったのです。ありがとうございます😃

[@godfatherofphil]

the engine by itself is a piece of art! Impressive job Kenji! Thanks so much for sharing your work with us!!!🙏👍

[@kenji-plasticmodels]

Thank you very much!!

[@brianmros4844]

Hi Kenji, That engine is so cool. Your fix for the fuel lines turned out so nice. I appreciate the accuracy of matching the real engine. I like the way the drive belt turned out. You always figure it out. Thank you Kenji, and take care

[@kenji-plasticmodels]

Hi, Brian. thanks again. So far, it looks like it will fit nicely into the chassis.

[@ちちちテュポーン]

ゼロイチからのエンジン、これだけでディスプレイしたい✨ ぐらい緻密でクオリティーが高くて美しい

[@kenji-plasticmodels]

ありがとうございます😃

[@kuroblacknoir]

妥協点が常人の遥か上なんですよね…エンジン製作とても見応えがありました！

[@kenji-plasticmodels]

ありがとうございます！

[@masakishogo]

『ロータス９０７エンジン』とググりながら実際のエンジンと比較しながら拝見してます！再現度、すごいですね！

[@florianj6490]

I did the same and was quite impressed as I saw the original!

[@kenji-plasticmodels]

お二人共ありがとうございます😃

[@guylabesseuille2716]

Vous avez une patience à toute épreuve ! Ce moteur est d'un réalisme extraordinaire ! Un grand bravo et un grand merci pour le partage de votre passion. A bientôt.

[@kenji-plasticmodels]

Merci. Ça se passe bien jusqu'ici, mais il reste encore à faire 😃

[@jasonsands8943]

I really like watching how you have such patience to put in the effort and detail! Fantastic skill!

[@kenji-plasticmodels]

Thank you!

[@georgeclements2742]

Another excellent video. Thank you.

[@kenji-plasticmodels]

Thank you!

[@nightcrow6965]

お疲れ様です。 いやぁ、キャブやるんだろうなぁと思っていましたよ。 予想では燃料配管だけでなく、スロットルリンケージまで行くだろうなぁと思っていたのですが…😅 ご自身では謙遜なさっていますが、非常に907エンジンの特徴を再現なされていると思いますよ。 1／24スケールとしてはかなり再現度高いんぢゃないでしょうか。 タイベルはまあ…ご愛嬌ということで。😅 今回はマイコン使ったりのギミックも盛り込まれていますので、あとは灯火類の電飾ですかねぇ。😊 次回も楽しみにしております。

[@kenji-plasticmodels]

お疲れさまです。ありがとうございます。 キャブはもうハコスカでじゅうぶんやったのでこれくらいでいいかなと😂

[@1BCamden]

The webers, it’s a fuel line and throttle cable return spring (the spring spans the two carburettor bodies) and is ~20mm in diameter. But who’s looking for the spring once you did the fuel line 😊 The cam belt is a marvel, just needs a tensioner 😉 What a beautiful job you have done, models that come with an engine aren’t as good as yours.

[@kenji-plasticmodels]

Thank you. I omitted the part around the throttle cable. The carburetor was enough with the Skyline GT-R.

[@florianj6490]

I was instantaneous looking for a picture of a Lotus Esprit engine at 17:40 and it looks literally the same! Maybe it's an S3 Motor? Just awesome Kenji! I love your work! Keep it up! Greetings Florian

[@kenji-plasticmodels]

I made the S1's early model engine feel like it was customized by the owner (me) who likes mechanics. Thanks!

[@florianj6490]

@@kenji-plasticmodels For a brief moment I thought you had an esprit back then, but then I get the joke (I guess) 😉😅

[@pakalbzh29]

Je suis épaté par votre soins et le detaillage poussé à l’extrême. Je suis fan. Bravo pour ce superbe moteur pur création.

[@kenji-plasticmodels]

Merci!✨✨✨

[@ご意見無用-m3i]

次回(今回)キャブ廻り手を入れると思ってました、凄く細かい作業が最高です

[@kenji-plasticmodels]

ありがとうございます😃

[@mr-fh8yp]

すげーなあ、おい。いくとこいっちゃってんのよ。応援してます！

[@kenji-plasticmodels]

ありがとうございます😃

[@RobertTempleton64]

Ingenious solution to creating the belt drive (it took me a bit to see where the construction was heading). And I learned a new phrase today: daibuyokunaimashita :D

[@kenji-plasticmodels]

Daibu yoku narimashita. daibu = very , yoku = good , narimashita = became

[@user_eksz]

とっても綺麗で精密なエンジン！パイピング工作、最高です。エスプリもきっと幸せですね。これがもし1/20なら、ターボチューンしてヒューランドくっつけてTAMIYAのLOTUS99に載っけたい（せっかくのデロルトが台無しですが）😁

[@kenji-plasticmodels]

ありがとうございます。ロータス好きなんですね😊

[@inabahideyo]

凄いなぁ～　特にベルトの作り方素晴らしいです

[@kenji-plasticmodels]

ありがとうございます、次やるときは上手くいくと思いますが 今回はやり直しません😃

[@JHartModelworks]

Absolutely beautiful.

[@kenji-plasticmodels]

Thanks!

[@fredericdobbelaere7725]

Parfait !👌 kenji champion du monde 😊

[@kenji-plasticmodels]

Merci 😃

[@michaelbaykara2322]

Maybe if the belt was 1mm thicker and the cross pieces were tighter together??...

[@kenji-plasticmodels]

Exactly so. The next one will probably work.

[@goforitpainting]

Professional 👍

[@kenji-plasticmodels]

Thanks👍

[@geoffreyclark9909]

Looking good

[@kenji-plasticmodels]

Thank you!

[@bostonbudz4616]

Nice belt

[@kenji-plasticmodels]

Thanks!

[@slavomalic1896]

Kenji you are positiv crasy... 🤙🤙🤙🤙🤙🤙🤙🙏

[@kenji-plasticmodels]

Thanks😂

[@vibeforge]

You can use plastic drive belt from old inkjet printers and scanners. You can also make it from sheet styrene.

[@kenji-plasticmodels]

Is it too big...?

[@vibeforge]

@@kenji-plasticmodels yours is okay, but hard to make and not as accurate as factory made belt. Printer/scanner belts are of different sizes, I remember holding around 3 mm wide one, but of course you can split it to needed size.

[@richardehrhart6744]

Bravo!!!

[@kenji-plasticmodels]

Thanks!!

[@Builtbyronny]

Good 👍

[@kenji-plasticmodels]

Thank you!👍

[@willierants5880]

[@marccxxshammer6643]

👏🏼👍🏼👍🏼

[@newtypecs700]

👍👍👍👍 sugoi skill !!!

[@kenji-plasticmodels]

Thank you!!👍

[@달봉이-l7i]

👍👍👍👍👍👍👍👍

[@garyb6219]

"Cut and remake", of course you would! :-)

[@kenji-plasticmodels]

Thanks😁

[@reneholstkristensen9429]

woow

[@kenji-plasticmodels]

Thanks

[@andrewavila1084]

If I need eye surgery, I'll buy you a book for directions and you can get to work on me instead of the doctors.

[@kenji-plasticmodels]

Yes!! (I don't have a license!)😂