The ONLY CS2 FPS BOOST GUIDE You'll EVER NEED, Increase FPS, REDUCE Input Lag, & CS2 Optimization!

[@nartouthere]

For Any Questions And Issues, Follow and Message Aysa on His Twitter: x.com/Afromnazareth Or Comment Down Below Make sure to check out the "FAQ/READ ME" in the google drive link if you have any issues Here are the other 2 FPS Guides I made with AYSA in the past kzbin.info/www/bejne/pZixoJyfop6Nra8si=lfvvVwZPnJjKVvQu kzbin.info/www/bejne/gIvad6hvh9Ocmbssi=piYJJymn6szc1oHw For LOW END PCs AYSA suggest (global shadow on low and dynamic shadows on all) but if you run cs2 with a high end pc you should put the shadows to high to have a better definition of the shadows and to see the shadows from a far distance on some maps!

[@zitounimohamedanas2626]

My fps increased and the game feels smoother but i got -11 and more packet loss and its consistent how can I fix that ?

[@sdkpt]

This driver version seems to be bugged, game starts black after the "optimization"

[@Chrisleonpeukert]

i cant debloat windows 10 because powershell is always closing

[@depatio]

Do I need to update nvidia drivers, after all the guides done ? thx

[@clipsfordays1560]

@@Chrisleonpeukert DID you find a fix?

[@orcristghost3204]

Step 1: stop wasting all your money on cases Step 2: upgrade your pc

[@aysafromnazareth]

ain't nothing better than that i agree

[@nartouthere]

[@b4dman]

best guide 😁

[@aysafromnazareth]

@@b4dman it ain't that deep i promise

[@XERTAA]

ur are wrong mid tier pc with fully optimized windows has 100% better 1% lows and more stable fps and dpc latencys and u have big advantage vs guy who has fucking 4090 and i9 smth

[@momosampler]

The guide is good, but you should compare the before and after with a PC to see what kind of gain in terms of FPS we can have depending clearly on each one's hardware. Because otherwise it doesn't make sense, I do all that configuration without knowing what the results may be. There should be some point of comparison.

[@nartouthere]

Noted ty

[@dior666-]

the results will vary because everyones systems are different... i didnt see a huge fps boost because my pcs already pretty decent but theres a big difference in the responsiveness and latency just make sure u set up ur backup just in case u dont like the changes or it somehow messes up ur performance

[@z4mur073]

no diference

[@fyxtro]

Please be mindful of where you save the Registry backup as this contains a lot of sensitive information. This contains all windows user and their hashed passwords but also whatever other programs store in there. Usually that is locked behind admin privileges but making a backup makes it more accessible. Not faulting the guide but be sure to remove the backup after you are happy with the changes or store it in a safe manner. This is coming from me as an ethical hacker where I have seen this before in pentests.

[@DevL_23]

bahaha i know right ? hahahaha they just silly kids thinking all that helps

[@becn]

@@DevL_23 corny

[@arditiramaj8558]

ye bro for real what a shitty video, in the files nart posted there is malicious code and fucked my pc.

[@inhlr]

Followed this after a pc reset, cs honestly feels really smooth. Thanks Nart+Afro!

[@kiyva]

I was a little bit skeptical at first since I read the comments, but still decided to try it and happy that i did, it boosted my fps by 60 or more

[@nartouthere]

Happy to hear. Thanks for sharing 🫡

[@agalyjumaklychev2868]

@kiyva did you do windows reinstall too?

[@kiyva]

@@agalyjumaklychev2868 no but when i commented this i had recently reinstalled windows

[@IB999yo]

What pc do u have?

[@kiyva]

@@IB999yo got a new one recently but i had a low-mid end when i wrote that

[@Matin_M]

It's a little odd putting a video out when you admit yourself that you have little knowledge on the topic. A lot of these changes aren't something I'd feel comfortable recommending everyone to just apply on their system with no understanding of what it is doing and little to no explanation is given on what the changes are that are being applied. In the future if you are collaborating with an expert on a video like this, consider having them in the video to explain everything that's being recommended.

[@lassii906]

Made no difference for me and my cs2 started crashing, thank god I listened to you and created a restore point xD

[@Zeazy]

for the config at 13:25 rate - wastes bandwidth, keep it default net_client_steamdatagram_enable_override - Turning it on lowers ping but makes packet loss worse if you have it mm_dedicated_search_maxping - set it to whatever ping youll max tolerate when playing, lowering will increase queue times and it may just put u in higher ping lobbies if theres no low ping ones cl_net_buffer_ticks - menu option like the one above this one, only set to 1 or 2 if you have unstable internet otherwise it will make the game feel laggy and delayed. set it to 0 engine_no_focus_sleep - it is good because it lowers the game usage when youre tabbed out. disabling this just wastes power... cl_cq_min_queue - 0 is smoother and worse hit reg, 2 is perfect hit reg but delay on the kill (feedback), -1 is a compromise between the two cq_min_queue_size - i dont know much do your research cq_buffer_bloat_msecs - same as before cq_buffer_bloat_msecs_max - dare i say it again? fps_max - try to use an external limiter (radeon chill, RTSS) as the built in one will make the game feel less smooth. you can uncap your fps, but expect higher temps fps_max_ui - useless, you dont want 999 fps in the menu??? engine_low_latency_sleep_after_client_tick - nvidia reflex stuff, literally goes against what the developers meant with reflex, your aim will feel wonky vprof_off - not even a command cl_crosshair_friendly_warning - cosmetic/your choice. draw orange circle over crosshair when aiming at tm8 cl_ragdoll_workaround_threshold - more simplified ragdolls when client doesnt know last player death position, higher values increase ragdoll inaccuracy cl_autohelp - should be off anyways, its meant for tutorial/new players guidance iv_off - not a command

[@potowogreedo]

Engine_no_focus_sleep 0 improved my alt-tab behaviour quite a bit, including not randomly changing to black bars. But then I just bit the bullet and use 1280x960 on my main monitor desktop when playing CS and now have zero issues lol

[@suhsuh2324]

Can you please put the number you recommend for those commands? My English sucks and I don’t understand how I should set those commands for the best performance. Thank you 🙏

[@aysafromnazareth]

the rtss part got me laughing, never play a game like cs with an external frame rate limiter !

[@z3k0cs2]

will cl_cq_min_queue be new cl_interp placebo from csgo

[@geekBengal]

"engine_no_focus_sleep - it is good because it lowers the game usage when youre tabbed out. disabling this just wastes power..." Who cares of power when tabbed out ??

[@Innes341]

I personally wouldn't make any of these changes unless there was a clear explanation on what each thing is doing.

[@aysafromnazareth]

you can edit every single file and check for yourself, windows catalog etc etc.

[@WaZarooo]

If u done some researches or studies these things will make sense to u , what all this does is just turn off windows applications running on the back round , there is many apps thats keeps runing no matter what just to do cheek ups or help u on what u planing to do next , some stuff windows does is it just record ur daily activity for example when u turn ur pc on the go to browser then open steam then toutube so what it does it remembers and keeps that ai runing for ur next app u planing to open , these things cancel all these things to free up cpu usuage for ur game , u might run to some issues on others apps but not in games

[@Matin_M]

same

[@Snow-el7yp]

that why you create a restore point for you pc. You turn each one on test it to figure it out if you don't like it undo it.

[@Kaywo7]

The first ever fps guide that actually did something huge thanks to both of you ❤

[@nide15]

when i open the drive link, it's just a readme file, did you find it somewhere else?

[@nartouthere]

@@nide15 check again sorry

[@nartouthere]

happy to hear!

[@draciano]

went from average 220 to 185 fps🔥

[@nartouthere]

Compare with real situations not the benchmark which will show you a different result after every reboot of your game

[@winsku]

@@nartouthere benchmark wouldnt drop that much just by rebooting your game :D

[@z3k0cs2]

Can you try deleting autoexec, userdata folder, and only put your old video settings (manually ofc) and do the same benchmark. Give feedback

[@dj-linputlag]

my fps dropped on aimbotz in the corner watching sky from 1000 to 920, with these autoexec, if I delete it it will be like 100 fps more

[@z3k0cs2]

@@dj-linputlag Thats what I wanted to hear, thank you. Waiting for some more from comments to test this for results to be 100% valid

[@crabman2]

Benchmarks: Before the video: 16:9 - 242 FPS // 4:3 - 315 FPS After the video: 16:9 - 347 FPS // 4:3 - 363 FPS RTX 3060 ti, idk you did this but an 100 FPS increase on 16:9 is unbelievable. And my PC in general is extremely responsive. W video my bro, thank you!

[@nartouthere]

happy to hear, thanks for commenting and sharing your results

[@_fr4mes743]

I like Nart but guys, don't trust any of these Fps boost guides if they don't show pre and post settings benchmarks. Plus, take each settings with a grain of salt as they could lower or raise your fps (but mostly likely do nothing).

[@nartouthere]

Hello! I appreciate your support. I get you might be skeptical but many have run my previous 2 guides with Aysa and saw a lot of success.

[@geeatsu]

@@nartouthere I've been messing with system optimizations for almost a decade. 80% of those tweaks are useless.

[@rossjones3913]

I had zero hope of this working but my game GENUINELY feels so smooth now! thank you, ive found about 70fps increase stable

[@FeedCounterStrike]

Just something to be aware of - many of these settings are a huge security risk. Of course that's fine if it's just a gaming PC, but if someone has some important personal stuff on that PC, it should be mentioned, so people are aware of it when they make a choice to do these tweaks. Good stuff as always Nart 👌

[@infinite7620]

Technically it was recommended to do this on a fresh install so.. yeah lol

[@-rowdy]

can you elaborate a bit on that? I can't think of anything that would be a "huge security risk" in here other than the old nvidia driver

[@infinite7620]

@@-rowdy honestly I think he doesn’t know what he’s talking about bro. Prob song uneducated youngsters lol

[@FeedCounterStrike]

@@-rowdy I don't feel qualified to give an explanation on why and it is not something that can be explained shortly in a youtube comment. Hence my comment was directed at the authors, that it should have been mentioned and optionally given a brief explanation why is that the case.

[@-rowdy]

@@FeedCounterStrike if you can't even give one example with a brief vague explanation, it's pretty safe to assume you aren't qualified to even comment on the risks in general, and you probably just got scared by the generic warnings Windows gives you when you do anything remotely advanced. My advice is to either not make baseless fear mongering comments, or just say what you really mean. For example you could have said "I don't understand any of this and I'm scared"

[@mohawkjoe64]

Your results may vary, but for me, this improved my game's performance so much I had to practically re-learn it! Thanks Nart

[@Jaden6077]

Unfortunately this guide lowered my FPS from 515.4 / 243.3 to 465.5 / 192.8 with 7800X3D and 7900XTX 😢

[@calopz1]

no way 🤣

[@Giovanniugo-l4v]

Why you want to change something it you had 515.4 fps🤣🤣🤣

[@Jaden6077]

​​@@Giovanniugo-l4vcuz its benchmark FPS and not real comp FPS I have a 360hz monitor and my FPS was between 290-320 I wanted 40 fps more instead I now have 40 less 😭

[@nartouthere]

Compare with real situations not the benchmark which will show you a different result after every reboot of your game

[@pred1993]

Disabling C-states and using power plans other than Balanced are generally not recommended (unless in certain cases and if you’ve verified the effect with before- and after benchmarks) on the 7800X3D. This is because it interferes with the boosting (and scheduling) of your CPU and most of the time will give you worse performance in games (you won’t reach your max boost frequencies on the cores you are using for the game). This is based on official information and recommendations by AMD as well as my own and others’ testing. Intel is a different story though. I have a 7800X3D paired with a 3070 TI and in the benchmark I reach 616 avg FPS and 1% low of 310 FPS (before applying any of the tweaks in this vid, only my own ones). So you should definitely have a higher FPS, assuming you have a decent GPU and are not playing on a 4K or something like that.

[@Berics1]

Super guide! 😀 Thank u so much! 0.507 for time schedule worked better for me so tyty

[@aysafromnazareth]

for low end pcs i suggest that you guys put (global shadow on low and dynamic shadows on all) but if you run cs2 with a high end pc you should put the shadows to high to have a better definition of the shadows and to see the shadows from a far distance on some maps !

[@nartouthere]

👍

[@aysafromnazareth]

@@punk92punk change it on the autoexec

[@punk92punk]

@@aysafromnazareth what about that freeze every 10 sec?

[@TKatch824]

@@punk92punk can be a issue with windows game mode

[@punk92punk]

@@TKatch824 should be on or off

[@rodrigomeneses6074]

Thanks a lot! great video. Keep these updates coming!!

[@nartouthere]

thanks

[@N1xara]

it feels more responsive, and less crazy fps drops. fps didn't rly changed much.

[@jackn1267]

Great video ive used Aysa a while ago and this video boosted my fps by around 70 and definitely improve my latency issues ingame. Keep up the great work!!!!

[@aysafromnazareth]

💙💙

[@nartouthere]

aysa the goat, thanks for commenting and sharing results

[@horrormaker1337]

nice one mate, thank you for the effort that you put in your work!

[@nartouthere]

it was all aysa! thank him :D

[@MITZILIPIKILI]

Prob the best guide otu there i hope you keep it up to date, your collaboration with Aysa helped out a lot of people

[@aysafromnazareth]

❤

[@nartouthere]

aysa the goat, thanks for commenting

[@JoanVA4750]

As someone who tried to optimize his computer, I have say that the thread launch options is the latest placebo of 2023-2024. The only thing that really works is debloat Windows. Also remember guys that cs2 is not well optimized so even on high end computers the game may get some lag (not internet lag, computer lag)

[@aysafromnazareth]

it's not placebo. run the game without the threads options and type sys_info on your console then check for your threads count. then run it back with the +1 method to get your exact numbers of cores and run sys_info again !

[@aysafromnazareth]

for example i own a 7950X3D which i simulate on the first ccx for cs2 ( so 8 cores 16 threads ) and the thread launch option gave me a pretty good boost !

[@ylli_vexx6716]

@@aysafromnazareth bro windows counts the core from 0 so if u got 8 cores it will show up in game as 7 because 0 1 2 3 4 5 6 7; that is 8 still

[@_fr4mes743]

@@aysafromnazareth All the threads I've looked seem to conclude that this only affects Intel processors. Maybe X3D chips are different?

[@geekBengal]

@@_fr4mes743 agreed on my 7800x3d the -threads gave me the most stable frametime and fps, and for me using the "-high" was the wining combo together with threads

[@maxgeorge488]

This has legitimately made my game feel a lot smoother. The latency is No longer here. Feels very close to csgo on a mid tier PC. This is a banger

[@aysafromnazareth]

👽

[@maxgeorge488]

@@aysafromnazareth ?

[@aysafromnazareth]

@@maxgeorge488 just a random emoji

[@nartouthere]

thank you for sharing, happy to hear the guide helped!

[@maxgeorge488]

@@aysafromnazareth thought u calling me a bot ahahah. Thanks for ur help tho boss

[@jesscas]

dam nart flexing his 500hz refresh rate goddam

[@aysafromnazareth]

that's mine :)

[@totocsgo]

@@aysafromnazareth thats sick :D Also you got any tipps on what to do if you have a really strong gpu but just a mediocre cpu?

[@aysafromnazareth]

@@totocsgo you can overclock your cpu to reduce bottleneck, but the best thing obviously is to upgrade your cpu and take one with a lot of L1 L2 L3 cache (most titles nowadays use a lot of that cache).

[@totocsgo]

@@aysafromnazareth thx a lot :)

[@jesscas]

@aysafromnazareth flex!!!! 💪💪💪 thank you for all these tips! I need to find the setting to have a random pretty picture again though, I miss that 😭

[@_egghead]

I gained 20 fps, does not drop below 100 now and game feels smoother overall. Thanks for this guide

[@aysafromnazareth]

💥

[@ChaostheClown]

Legit 60-80 FPS gains on my laptop this is huuuuuge as I was dipping as low as 90-120 at times, now I haven't seen it go below 160!!! Insane.

[@rexxarGG]

the windows 10 debloater open with powershell does not work. Window closes immediately, anyone knows why?

[@enjoyurcode]

I simpy solved it just removed the Debloat folder to somewere else of C disk on my pc, coz powershell only executes files if they are in C disk folder or just in folder where is you windows was installed

[@jeanhardyv]

never seen anything like this video. Great job dude

[@nartouthere]

Thank you 🙏

[@biskerJ]

Hello , i rarely comment on YT but this video is amazing and very well explained thank you very mucho

[@partyboy5377]

Thank for the video! BIG FPS boost after watching this video.

[@nartouthere]

🤝🤝🤝 happy to hear the guide was useful

[@christianhyde1754]

@nartouthere is that still the best nvidia driver to go for or is it worth getting a newer/newest driver instead now?

[@1eray]

I tried this on my laptop and it solved my input lag & instant ms drop problems. I also have higher FPS. Thanks!!!

[@SchwainerSchinkler1510LP]

Yes exactly, I like to make changes to the registry and download several programs from a stranger. Yes, of course

[@nartouthere]

who is the stranger?

[@aysafromnazareth]

if you don't feel safe doing it, don't do it ! we don't force anyone to do the guide.

[@morpheus8300]

Ey ohne Dregg alder

[@0xdeadc0deinzayne35]

this guide boosted my pc you would believe, thy

[@kobe6k]

NAHH RAN THE CLEANERS WITHOUT MAKING A RESTORE POINT AND IT DELETED ALL MY FL STUDIO PROJECTS. IM DONE FOR, MY CARRER IS OVER. MY FAULT THO NAHHHHHHHH

[@polishadv1ce350]

@@kobe6k bro, i did all that and next day my cs2 was crashing like 4 times a game, later that day i restart pc and the system was corrupt and i lost everything, i did restore point but it did not work

[@kobe6k]

@@polishadv1ce350 RIP bro hope you didn’t have too much to lose.🙏

[@polishadv1ce350]

@@kobe6k thanks man 🙏 unlucky i lost a lot of gold memory's as clips, data and other stuff, even a pro IT Guy tried to get it back but unlucky for me the most important stuff was on the same drive as windows

[@polishadv1ce350]

@@kobe6k and i mostly don't recommend doing those steps only steps u could try are the Nvidia settings and maybe steam settings

[@kobe6k]

@@polishadv1ce350 i only tried doing these because my gpu black screened so now im just running integrated cpu graphics. cant even run cs2 in the lowest resolution with 30fps lol

[@medicsoff]

this actually lowered my fps by around 50 but my game feels incredibly smooth now and way better than before, i cant even describe what felt wrong with it before or what in particular fixed it, but thank you

[@thaisen4867]

The Nvidia control panel is not working. It's not showing up on either windows 10 or 11 and i can't debloat windows 10 as it keeps shutting down powershell

[@alinaser2332]

me too

[@juriwulff7946]

I just ran NVIDIAControlPanel_8.1.958 which also is in the folder and then it is available with the version selected from the clean install. Try it

[@tomasiskooo]

I had a few problems with this guide too. Also I lost like 15% fps (already had partially optimized win 10). Eventually I ended up restoring from the backup

[@Котик_Подвальный]

It's included in the folder, you can reinstall it from there.

[@frank_low_jaeger]

I had the same problem and found a work-around. From the Windows menu, search for Powershell ISE and run it as administrator then right click on the Windows10DebloaterGUI file and select 'edit'. It should open up the file in Powershell ISE. In ISE on the toolbar, there's a green play button that says 'run script' if you hover over it. Click that and hit yes to run as administrator then proceed with this tutorial. As for Nvidia CP, I just went to my web browser and redownloaded it. Hope that helps!

[@MohdAlmaeeni]

tbh this is me first time to write a comment but i did every think with the steps and i was 160-170 fps and now I'm 290 fps so I'm very happy with the results !!! thanks man you saved me some money that I was planning to upgrade my pc !!

[@nartouthere]

happy to hear the guide helped! thanks for commenting your results :)

[@TheRyuukazi]

13:25 I was using "rate 1000000" as well, and it made the game automatically reset to the LOWEST rate. It used to be like this in csgo, but apparently the highest rate you can set in CS2 is "786432" (equivalent to 8MB or >, like if you would set through the menu).

[@Alexander-iq6bc]

Doesn't it just say LOWEST in the UI settings?

[@z3k0cs2]

To be honest I was always aware of this, question is does rate 1000000 in autoexec forces it to the highest rate even in the ui it says extremely restricted, status in console will still output 1000000 rate, we need aysa to confirm it

[@goodstuff]

yeah in the options it appears as the lowest, but in actuality it is not. you can confirm this by checking via console. the menu just doesn't have a display option for your set value so it visually bugs. Anyway, you don't actually need your rate that high. I have tried default options and 1000000

[@limwei6241]

Sorry but doesnt feel good on game. Maybe something wrong with autoexec

[@Alexander-iq6bc]

@@limwei6241 Did you only change the autoexec?

[@jjjg409]

loving the audio free tutorial. good content

[@CJ-hf7bl]

THANK YOU SO MUCH!!! I CAN PLAY AGAIN had stutters for months and now smooth the whole time!

[@nartouthere]

Great to hear!

[@swammiecommies6275]

Did not gain much FPS but it did stabilize my FPS. As far as I can tell I have no more random drops that I would normally get.

[@PRPS730]

This guide really helped! Went from having 200 to 350 fps! Thanks Nart and Aysa, you guys rock 🤘🏼🤘🏼

[@notseeguy]

Bro need to fix lag in 200 fps💀

[@Alix777.]

​@@notseeguy Shut your mouth silver

[@johnk3769]

I appreciate you making it real easy to do all of this as I got a boost of ~10FPS before OC on AF. After OC w/ RTX 3060 Twin Edge OC 12GB +172mhz on core clock and +1210mhz on memory clock, Re-bar enabled on my Asus Z790v-ax i9-12900k (5.3 OC) 32GB(16GBx2) RAM DDR5 6400mhz(32-38-38-96 timing) I have an increase of ~25-30FPS. Vprof on CS2 P1 increase of ~50-60 FPS which I can definitely feel the difference w/ stretched 1280x960 255hz Btw, I was happy to see that it fixed my TCP Connection Latency programs that were greyed out as it has been driving me crazy recently.

[@aysafromnazareth]

try to bring that ring ratio up, that helps a lot actually !

[@nartouthere]

happy to hear the fps boost worked , thanks for sharing

[@turnzCS]

wow ive been needing this ever since I upgraded to windows 11 THANKS!!!

[@nartouthere]

🫡

[@jiteshshankhpal3034]

this worked for me really increased the fps and overall performance even in other games

[@nartouthere]

happy to hear, cheers

[@ItsCawaPvP]

engine_low_latency_sleep_after_client_tick true, could someone explain in more detail how exactly this command works and whether it can be enabled if you have an amd video card, there is only one article on reddit on this topic, it is too huge, if it is not difficult for anyone, does it affect is this team delaying the game?

[@redcookie110]

just dont use it. it dosent really affect performance

[@elgarstiltins7719]

Great guide for rtx 3050 and win11

[@AWUUUUUSYNUUUUU]

Just add info about disable eco/green mode for any internet adapters. Great work as always. Good job

[@aysafromnazareth]

as we do more and more videos together i'll eventually put everything that i know someday, so stay tuned !

[@nartouthere]

big thanks to @aysafromnazareth

[@adomas0587]

After this guide I restarted pc and now there's no nvidia control panel and I can't install it because appx files won't open.

[@louiecs2]

needed this

[@nartouthere]

i got you fam

[@andromeda_428]

Before that I had around 160 fps, now around 200, insane ! Thanks a lot 👍

[@nartouthere]

cheers!

[@konffen]

I was hyped for this guide but it contains too many overlaps, some of this is just snake oil / placebo, some of it is good, and some is just personal preference. Just running a bunch of .reg or .bat files without checking the contents is crazy, and even if you do check a lot of the code is missing comments... e.g. under Nvidia why change P0-State like that globally instead of just setting "Prefer maximum Performance" for cs2.exe in the NVIDIA Control Panel (or even with the included nvidiaProfileInspector)? Why is the part from Registry\Regy.reg "Allow scripts in CMD set-executionpolicy remotesigned" needed? Also the Debloater wants to remove MSPaint and Calculator? I'd love to see a more narrow guide with just the most safe and impactful tweaks.

[@aysafromnazareth]

Did you just compare p state with max power on nvcp ?

[@konffen]

@@aysafromnazareth Yes, is it not comparable? From Nvidias own docs: "P-States are GPU active/executing performance capability and power consumption states. P-States range from P0 to P15, with P0 being the highest performance/power state, and P15 being the lowest performance/power state. Each P-State maps to a performance level. Not all P-States are available on a given system. The definition of each P-States are currently as follows: P0/P1 - Maximum 3D performance P2/P3 - Balanced 3D performance-power" The only things I can find for forcing P0-state are people trying to get better hashrates when mining crypto. If it is actually good for CS2 performance/fps/frametimes/input lag please explain how? How does it differ from just setting "Prefer maximum Performance"?

[@aysafromnazareth]

@@konffen please run a test without the cmds linked on the nvidia folder then check your clocks then redo the driver install with ddu etc, run the scripts and compare the clocks again. we're talking about unrestricted clock policy here so i don't know what you are comparing.

[@rhysrahman8061]

I benchmarked before and after. Went from 147 fps to 160fps. Not major breakthrough but I'm happy with any increase considering i play on my laptop. Thank Nart and aysa😊

[@cr3t1n3lu]

bruh my cs doesn t work after this tutorial wtf

[@vishalahmad-ck6cu]

That's what the restore point is for

[@MrKojanFX]

im geting an error on NVCleanstall, he simply dont install nvdrivers, ive tried a many things, 0 results. someone have the same error? (NVIDIA cannot install the drivers, error in the physx and driver) anyone have an ideia?

[@emresurez]

same problem happened to me as well

[@teddyJayyy]

Honestly, didn't do a thing for me.

[@xBroKen1986]

You are a genius, thank you so much

[@nartouthere]

aysa the genius! big ups to him

[@NadesOutHere]

Thanks Aysa and NarT, I Gained 200+ FPS after running this guide 👍👍👍

[@nartouthere]

no problem!

[@nguyentuan9669]

It has been working effectively with a frame rate difference of about 100 FPS compared to before. Thank you for this helpful video. However, if I change to a different CPU in the future, will I need to reinstall everything from scratch?

[@xagurate]

You are very late bro i already left cs2 behind

[@aysafromnazareth]

Gabe Newell on why game delays are OK: 'Late is just for a little while. Suck is forever.'

[@S7Roses]

😭😭😅

[@TTEREVE]

Why even waste your time watching this?

[@nartouthere]

time to come back

[@M3Busssin]

Everyone should stop making CS2 content, heck why even have pro tournaments if @xagurate already left cs2 behind and moved on to valorant ?

[@nartouthere]

For LOW END PCs AYSA suggest (global shadow on low and dynamic shadows on all) but if you run cs2 with a high end pc you should put the shadows to high to have a better definition of the shadows and to see the shadows from a far distance on some maps!

[@XERTAA]

medium* new update men all + medium doing the same shit

[@장래희망건물주에내집]

hi this video was helpful to increase fps up,i have smoething question for you, l have a plan to change my memory16g to 32g , should i try this again? or it does`nt matter?

[@angelangelov1397]

AWESOME! I have an i9-14900k + rtx 4090 and i had lagg and input lagg but with ths tutorial i managed to fix it!!!

[@aysafromnazareth]

🤠

[@aysafromnazareth]

disable your ecores for a higher average !

[@ArkoN7]

yeah -threads 9 fixed these lags for me, it was the e-cores that produce these lags and with them disabled for the game, its gone.. anyway I sold my 14900k and went to the 7800x3d and now I draw 130w less power and have around 100fps more frames on the cs2 benchmark, getting 725fps now on high settings 1440 strechted, 6400mhz gskill ddr5

[@nartouthere]

AYSA Credentials: x.com/G2m0NESY/status/1785321464985452951 x.com/AleksibCSGO/status/1784306563013869783 x.com/gla1ve_cs/status/1709997173134241843 x.com/rigoNcs/status/1785336227698196705 x.com/KjaerbyeCS/status/1783462160951046294 x.com/NBK/status/1779179974835994913 press.pglesports.com/296091-pgl-cs2-major-copenhagen-2024-new-pcs-are-ready-for-the-most-prestigious-cs2-tournament-of-the-year

[@nartouthere]

👍👍👍

[@zitounimohamedanas2626]

@nartouthere if an update shows up ,should we update the driver we got or get the newest one ?

[@Котик_Подвальный]

These people have $10k PCs lmao, what "optimizing" do they possibly need?

[@SleepyCS2]

@@Котик_Подвальный a 10K pc can still run like dogshit in comparison to it's full capability. Your question is like asking why sharpen a sword when it's perfectly good dull. no offense.

[@clementearaujo92]

theeeeee beeeeeeeeestttt tuto my friend 😍😍😍🤩🤩🤩

[@nartouthere]

Make sure to check out the "FAQ/READ ME" in the google drive link if you have any issues

[@saxepaulete1282]

Thank you, really appreciate you for making this video @nart, my fps boosted/gained another 150+. shoutout to aysa for the optimization. +rep

[@nartouthere]

LETS GOOOOOOOOOOOOOO

[@Reazdbd]

On ancient i had about 150 on a full lobby, now about 180-220 Thanks for the video!!

[@nartouthere]

cheers! happy to hear the guide helped

[@itsbladde3107]

Thank you Nart

[@nartouthere]

🤝🤝🤝

[@saulodegrandi6139]

I was missing the ones starting from min 10, and yes the game feels light, the aiming, the animation, the recoil, etc

[@fedes.8896]

Good guide. I have been looking consent of low latency mode. There are many opinions for that

[@lunia1911]

Thank you for this, this really help a lot, my apex legends now run with 100 to 130+, i use to run apex with 80 to 110+ fps. This is such a big improvement for my shitty PC, LOL. I just follow everything except changing my NVIDIA driver, i use the newest one, it work just fine.

[@nartouthere]

cheers

[@Jonsson95]

This helped me alot. Went from 204fps to 326fps on fpsheaven benchmark map.

[@vadkom]

1. You need firstly create a file “backup video” and then create restore point. 2. Maybe I did something wrong, cause after reboot my pc my internet worked only in CS. I can’t even open google, start FACEIT , FACEIT AC, discord. If you know how to fix that without use restore point, write down below please. P.S. sry for my eng)

[@indiemoans]

LMAO didn’t actually think this would help but tried it anyways just because Nart has been a trustworthy content creator in the CS scene for a long time. Thank You very much ❤

[@mikkelsztuk]

This guide was what i need to make the last of my game smooth. And feel more snappy. I have try alot of thing for get my game run smooth and more snappy. After this guide my game run like Smooth Criminal from Micheal Jackson

[@utasmasodik7726]

It's great that they've helped people who don't have the opportunity to play games, including Counter-Strike, but I believe there are too many such people. This large number of people could, in quotation marks, rebel and tell the game developers that they should create an architecture or platform in Counter-Strike that makes the game more playable and significantly expands the user and player base. This responsibility lies with Valve, or if not Valve, then the manufacturers. So, the focus should be on showing the way to activate possible in-game configurations that make the game more playable, rather than people having to make driver-level modifications on their computers just to achieve a stable FPS for one game. With that effort, you might as well start the video by advising people to install a separate Windows just for this purpose because many other games' settings will crash. So, as useful as this video can be, it can be just as bad if someone isn't aware that they are making modifications that affect many other games, especially when digging into the registry.

[@ezi7331]

I really appreciate you for this video finally got my fps to reach 600+

[@tonysu8286]

what cap dude

[@nartouthere]

lets go!

[@Matin_M]

I didn't apply most of these changes as I didn't feel comfortable doing so. A lot of these are personal preference options or things that I frankly don't understand so I'm not going to run them without proper explanation of what it's even changing. BUT the input latency section is actually insane. My overall input latency which I measured using FrameViewer (not to be confused with frame times seen ingame) went from 10-15ms to 6ms. Actually insane. No FPS improvement, but again, I skipped like half of the items or more.

[@ClaptainClips]

I can't see nvidia control panel any more? I assume it's because there is no Windows 11 option when installing the 546.33 Windows 10 Drivers, what do now?

[@corey6724]

before this guide, i had ~450fps average & 1% @ 180fps. after this guide, i now have ~500fps average & 1% @200fps. thanks!

[@aysafromnazareth]

🤠

[@nartouthere]

W

[@BrunoAlves-tr9bl]

A simple question, do you use ULTRA LATENCY MODE ON THE PANEL AND REFLEX ON in the game The two connected improves gameplay??? I currently use LOW LATENCY OFF and REFLEX ON within the game

[@shaileshapte8701]

Didn't followed any configuration / nvcp setting or lasso tweaks... only used windows debloater.. My fps got boosted from 130-140 to 200+.. Thanks 👍

[@HVICTOR3]

Great guide thank you

[@nartouthere]

Wouldn't be possible without Aysa, thank you

[@remuz3561]

What's the real point in having dpclat running? I don't really get it and I don't feel any difference with it on vs off, is it literally just a 15ms increase in latency ingame? Because that's pretty much nothing even if 180ms reaction time + ingame delays counting up to around 200 - those 15ms could make a difference if I'm right in how this works. I just want to know if it's really doing something or just placebo tbh.

[@guigo6]

this is a really good and complete tutorial

[@nartouthere]

🙏🙏🙏

[@zajcev2k]

Very usefull i run cs2 benchmark map before i had 430fps now i have 495fps. Thank you for upload :)

[@nartouthere]

good stuff, thanks for sharing

[@Rubinho2447]

I have a RX 5700XT + r5 5600x, what settings do you recommend for AMD Anti-Lag 2.0 (enabled or disabled) and Global Shadow Quality (High or Low) ? Also, ty for the help ! Game feels way sharper !

[@aysafromnazareth]

hey ! check the faq for the amd video

[@aysafromnazareth]

low for global shadow and all for dynamic shadows

[@Rubinho2447]

@@aysafromnazareth Just checked, didn't find AMD Anti-Lag 2.0 option in the video ? What u recommend ? Ty

[@aysafromnazareth]

@@Rubinho2447 you can use it, it is safe now !

[@Rubinho2447]

@@aysafromnazareth |TY for all the help aysa !😀

[@unluckyleprechaun2937]

Would this affect the performance and graphics quality on other games??? Thank you for answering

[@aysafromnazareth]

no as long as you keep other games on high settings !

[@svedorn]

Should we stop windows updates as well? I guess this was not mentioned in the video.

[@hajatee2495]

One question please. When i did the Autoexec commands, it changes Max Acceptable Game Traffic Bandwidth to Extremely Restricted. I have always thought it should be Unrestricted if you have good internet (i got 1000mb) or is it optimal to have it Extremely Restricted? Other than that thank you for the optimization guide CS2 feels much better after doing it. Edit: the autoexec command that changes it to Extremely Restricted is the: rate "1000000"

[@souln25]

I wonder if Aysa has some of the updated optimisation process for AMD GPU's? Maybe a separate video?

[@aysafromnazareth]

the only thing that would change would be amd dwords and anti lag +

[@NotNoahh_]

since doing this my game felt really good for a few hours and is now slow to open virtually everything when practically none of my resources are being used

[@Alix777.]

I did literally everything in the video and now my game is awfully laggy now great

[@morosek]

So after doing all of that I went from AVG - 392 and P1 - 134 to AVG 442 and P1 - 173. Checked on a fps benchmark map so let's say it's consistent. Done with ryzen 5600 and 4070s.

[@sKY-cp3bb]

thanks bro really good video i gained 40-80fps and 0 input delay

[@nartouthere]

W