Native VLAN - Video By Sikandar Shaik || Dual CCIE (RS/SP) # 35012

A virtual LAN (VLAN) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2). LAN is an abbreviation for local area network. To subdivide a network into virtual LANs, one configures network equipment.

[@krishnakanth6703]

Sir I like the way you teach..

[@samzwell]

666 🥺 that's anti-christ

[@Sunil46333]

Very informative.

[@MuhammadBilal-ho3ol]

salam sir i have question i implement lab as you mentioned in your video but i add two HUBS for two different network let's (network1 10.0.0.0 ,network2 11.0.0.0) two pc connected two different hub with different network and i have two Vlans (10,20) i set native vlan 10 in switch 1 for network 1 and its working fine but i did'nt set native vlan 20 for network 2 its cannot communication so what should i do.while i set two trunk port two different giga port.

[@Desikalakar4u]

Sir kya layer 3 switch main do vlan bna k static routes ho Sakta hai mtlb system to system network to network nahi.aur usme ek server jo dono vlan main available ho.

[@rehan2118]

Is that CCNA or CCIE level?

[@networkengineer2734]

Such useful channels have low subscriptions Shame on us

[@MrJibril2012]

Brilliant,thanks you made it simple not like other instructors who give irrelevant information to the topic.its always good to go to the point instead of giving alot information which is unnecessary.

[@saradag6939]

Best faculty i have seen in KZbin 🙏

[@maheshwaghmare8811]

Explanation is good but practical speed very fast so i do not understand 🙁

[@shaan7481]

SIR CAN YOU PLEASE MAKE VIDEO ON DTP. PLEASE ITS A REQUEST.

[@prabhanjan6]

Thanx a lot Sir

[@fikrisokocul7232]

is vlan same with hybride port ?

[@TheSagarsikri]

A question for the native vlan video. In the first diagram, sw2 is connected to hub and you have mentioned it as access link. How can it be access link if you are talking about switchport receiving untagged frame and forwarding it to native vlan? It should be trunk link then. Another question- do we connect hub to access port of switch or trunk port of switch ?

[@vijaykumar-dy4vb]

Thanks a lot

[@shubhamsharma7628]

native vlan video ???????

[@muhammadhammad271]

Asslam-O-Alikum Sir I am. Confused about native vlan because you assigned this native vlan to interface which is trunk link. Please help me. Thanks #NOA

[@meghrajraee873]

When the untagged frames are received by the switch on the tag or trunked port, those untagged frames will be tagged with the native VLAN and when those frames leave from the switch through the port, that tagged native VLAN will be stripped out until it reaches its destination. So regardless of the trunk link between the switches, the untagged frame can pass through.

[@SunilGupta-yz1rv]

Because, Dot1q by default also carried the untagged traffic (Which is Native Vlan 1 by default in Cisco switch) and since there were no other Vlan defined on both switches you will not see tagged traffic but untagged traffic. Also instructor just changed the Default Vlan 1 to another vlan 999

[@SunilGupta-yz1rv]

If you will set encapsulation Protocol ISL and since it is a Cisco Proprietary it will carry the native vlan traffic as a tagged traffic

[@natrajexplore]

Sir... what's l2 vlan and l3 vlan ? & brief the difference between?... thank you..

[@sallysherin5679]

Layer 2 and layer 3 vlan operating in two different layers

[@delta_eps8916]

Hello, The interface for the PC do you used it for native vlan ? Thanks

[@zaidkorbyn4756]

instablaster

[@aarifchhipa1138]

sir how many native vlan configrar in a one switch at a time

[@harshavardhana5907]

It depends on the number of trunk links, eg - if you have 6 trunk links than you can create 6 Native Vlans .

[@aarifchhipa1138]

Ok sir thanks

[@jackyappu]

good explanation

[@ABDVlogs121]

Sir , What is the maximum number of native vlan we can create?

[@naveenrajumeganathan8581]

Aditya Banerjee we can create from 2 to 1001 native vlan

[@ABDVlogs121]

@@naveenrajumeganathan8581 Ok Sir.

[@ncrayan101]

@@naveenrajumeganathan8581 same as trunk links

[@TheLokesh1993]

in which video DTP EXPLANITION ..

[@sathyanaresh3080]

NOT their in NOA ins

[@harshavardhana5907]

Hi Lokesh , DTP ( Dynamic Trunking Port ) - this is a Cisco proprietary, All the ports on the switch will be in dynamic auto mode by default, so whenever you connect a pc or a switch/router it will try to auto-negotiate the connection on the other end. Port Modes : Dynamic Auto Dynamic Desirable Trunk Access NOte : its good to hard code the ports to either trunk or access, PFB the chart Dynamic auto Dyanmic desirable Access Trunk Dynamic auto Access Trunk Access Trunk Dyanmic desirable Trunk Trunk Access Trunk Access Access Access Access Limited connectivity Trunk Trunk Trunk limitd connectvity Trunk