Van build Pt 6 | Alpine Van Works Hide and Go Seat Install

[@NHJDT]

Very good explanation

[@roamingwithjosh]

Thank you

[@matthewellis3004]

Only thing I don’t like about this is the cantilevered/unsupported side creating significant stress on the mount area. I would custom fabricate some sort of kickstand / vertical support that can be pivoted out of the way when stowed or completely removed simply. In a perfect world, it would be helpful to have a quick release to remove but leave the baseplate in position to completely remove out of your way when necessary to fit other loads. Thanks for posting.

[@roamingwithjosh]

Thanks for the input!

[@paulwoo8704]

Is it comfortable for long ride?

[@melodypaz7247]

I can understand your concern. However, the cantilever design is and has successfully used in bridges for multiple vehicles and houses on cliffsides. My area's public transit system uses this type of cantilever- style seating in its buses. The only improvement to this installation would be to mount it to the vehicle chassis, as well as three- or five- point seatbelts, to bring it up to highway safety standards.

[@DouglasHydorn]

What are the measurements are the mount plates underneath… the website does not have dimensions? Please and thank you. You’re awesome and helpful🤙🏻

[@bradlandon7891]

looks like a great product. I am trying to figure out if the placement will interfere with the heated flooring system from just roaming design...the columbia flooring system. Any knowledge on this?

[@roamingwithjosh]

I'm not entirely sure on that. Sorry I couldn't be more helpful.

[@robin01m]

Bro come to Australia in Melbourne and $$$$ just install these seats in vans

[@roamingwithjosh]

LOLOL That's quite the trek!

[@melindacastillo3774]

I have the same thing. So easy to install.

[@roamingwithjosh]

Likewise

[@scotthagan3189]

are the seat comfortable?

[@spoton5981]

Is it legal to install facing the side of the vehicle?

[@BillNicholsTV]

I like the idea of these, have been looking for something. When you show it first going down, it looks it is a bit wobbly. Are they solid at final install?

[@roamingwithjosh]

It's very solid at final install. I would recommend not installing over the subfloor and installing directly to the metal and cutting around for your subfloor.

[@RedSiBaron]

Well that might solve our problem with a travel seat for the bus. How do you think it would handle two car seats? possible or no?

[@roamingwithjosh]

It really depends. Car seats are huge these days. My daughters takes up a ton of space. I’d be happy to sit two of them up there and snap a pic if need be.

[@MooseWRX]

That's one of the main issue's I've been trying to work around! They DO make some car seats that are made to be more narrow so they can fit 3 across the rear of most standard vehicle, so that's something to consider as well.

[@AnthonyAlleva]

Do they make the mounting plates for a 2024 RAM 2500 Promaster?

[@roamingwithjosh]

Not sure.

[@mictaylor6637]

Does the seat manufacturer (Freedman Seating Co) authorize attaching the steel mounting plate to a floating floor as you've done or must it be mounted directly to the steel floor of the van itself?

[@roamingwithjosh]

I would contact freedman seating co on that one.

[@melodypaz7247]

Excellent question! The public transit where I live installs these seats directly to the chassis of the shuttle buses which allows the passengers to be kept in place even during a traffic accident.

[@jjclar5315]

Thanks for the video - did you purchase the plates underneath the van or made them yourself? Can you share the thickness of the plate?

[@roamingwithjosh]

The come with the seat.

[@jjclar5315]

Thanks@@roamingwithjosh, do you also sell the plates without the seat?

[@melrichardson2392]

IC think you forgot a washer though ,what's the torque setting on the nuts and bolts.

[@roamingwithjosh]

I didn't forget any washers. The manufacturer would know the torque specs.

[@jasongiebenrath9307]

What size and grade bolts did you use on your install. Thank you

[@roamingwithjosh]

Bolts come with the seat. I'm unsure of their exact size and grade.

[@thepatternforms859]

Hey does the seat recline back at all????

[@roamingwithjosh]

It does not unfortunately

[@AndresEliasGonzalez]

Do you think it can fit in ford transit back side? Thanks

[@roamingwithjosh]

Yea for sure.

[@DavidGarrison-od6yd]

is it DOT approved ?

[@txws2525]

I don’t seem to see a link to this seat and mounting kit! Can you send it?

[@roamingwithjosh]

The kit comes all in one with the seat!

[@MichaelFerrara-f6p]

@@roamingwithjosh not seeing anything that comes with this plate

[@pedroluccajr]

Where I can buy one of these

[@roamingwithjosh]

Check out thevanmart.com

[@paulwoo8704]

Is it comfortable for a long ride?

[@roamingwithjosh]

Not for my 12 year old son. We have to break the days up to give him time to run and stretch.

[@MohammadAlbloushi-n4i]

Where i can buy same this seat please ?

[@roamingwithjosh]

They're kinda hard to come by last I checked. I would connect with freedman seating company out of chicago.

[@tyesandoval4391]

Before you waste your time this seat cost $3000 on Alpine Van Works Sight

[@roamingwithjosh]

That's how much they cost.....

[@binyamj]

Do you trust this with your kid’s lives? It has not been pull tested and therefore, its safety is unknown. When there is weight in the seat, it could twist out of shape, because only one side is attached. This seems like something you wouldn’t want to use in motion. Buy a safety tested seat for your family. JMG or Benchmark, make safety tested/pull tested seats.

[@JohnDrach]

Do you have any links. Im searching and not finding much for these companies

[@carlose6010]

The 2 bottom brackets sit flush with the frame in different areas. There would be a weight limit, especially important if in a head-on crash, rare. An upgrade could be it clips in at the floor when folded down. As strong or stronger than standard seats, then.. usually standard seating just bolts into the frame.