NCE Power Cab How To Consist

[@elr2141979]

@DieselSmoke92 Also about the one going faster, if they were both pulling, don't you think ones wheels would be dragging abit since its slower? at slow speed one was a #1446 was a little faster then #1452. when you pick up speed both will pull about the same. thats the only thing i don't like about MRC decoders.

[@BNforever2009]

glad you showed this--im in a new club and they use these throttles.

[@aocruiser]

Thats a pretty nice system! Thanks for sharing!

[@randa200771]

Thanks it's much easier than I thought. How about this situation , the 2 locos arrive at the end of their journey but only one is to return on another train while the other does something else. So how do I get the 2 locos to do this independently? Cheers Rob

[@elr2141979]

@DieselSmoke92 Also from your opinion what do you do when you have to much trains for the NCE DCC since its limited? you can have as many locomotives on the track as you want with this system. but you can only run 6 locomotives at one time. i tried to run 9 at one time but the power cab will shut down when it has a overload.

[@wrpb1]

Is it possible to consist more than 2 engines. I would like to consist 3 or 4 engines to run as !

[@genorails3]

hey man thanx for this im getting a nce pro power cab and this was very informative if i have any questions can i get ahold of you im a beginner and so far everything has came out great have 8 engines and i mite need advice on decoders so thanx ...gene

[@StrangeRealityVlog]

I recently purchased the nce powercab. And im having some issues, I don't know if it is just the way it works or if I got a dud.? Sometimes when I power on the system is it normal for it to show a non existing cab address that does not exist nor have I ever programed it. Keep in mind I purchased the power cab brand new. I changed the clock to show track amps because I was having a lot of stalling and stopping... is it normal for the amps to jump up and down constantly. I also have been noticing that I will take the locomotives up to speed, and hit recall to adjust the other locomotive speed, hit recall again to go back and it shows all zeros and the only way to stop the train is to hit the EMERGENCY STOP. We called nce and the guy had us do program 5 x enter 12x to reset the system. That's about all the help they have been. Sorry so long. Just been frustrated. Thanks

[@elr2141979]

not sure why it would do that.

[@lowliferedneck]

How do you speed match them together ??

[@arthurhouston3]

I will redo this so every one can see it. Updating is your problem. Arthurhouston3 channel

[@Pipecleaner202]

Do you know how to consist the locomotive together? i would really like to know.

[@UNIONPACIFIC3606]

Thanks this helped a lot, do you use this same method for 3 locomotives?

[@elr2141979]

Yes

[@dianasaltikova8119]

*Only 18* 👇👇👇 884780.loveisreal.ru

[@jackbogan3439]

I have a NCE ProCab. My understanding is you can 6 loco's in a consist, but can you have more than one consist at a time?

[@elr2141979]

Jack Bogan yes you can

[@jackbogan3439]

Thank you very much for answering my question. Do you know how many you can have. Appreciate your help.

[@calebeaster4094]

This will allow me to control the sounds of each engine serpartly right?

[@elr2141979]

Gentlemans Trains yes it will

[@calebeaster4094]

elr2141979 thank you

[@Primal67060]

Now you just have to speed match loco 2 to loco 1.

[@wrpb1]

think I just found out my answer from ▼ Report spam or abuse ICONS OF FILTH