Installing the Banks CAI and custom oil catch can on a Ram 3500!

Рет қаралды 3,852

Күн бұрын

Chnaging out the CCV filter on the Ram 3500 but we modify the system to add a catch can. To make room we add the Bank CAI and get some sweet turbo noises to boot.
/ neckofthewoods2020
Moroso expansion tank
amzn.to/45ktYV0
Coolant fit kit
amzn.to/45c8dGI
Redline 5w20
amzn.to/3KQTQPY
Redline MT-90 GL4
amzn.to/3QQEC15
Redline 75w90 GL5
amzn.to/3QQ4M4k
Redline Water Wetter
amzn.to/3sisBr3
Motul RBF600
amzn.to/45zbbEU
Air Jack
amzn.to/44bBcKb
Jack Pucks
amzn.to/44aFzFk
Nord-Lock
amzn.to/44dB1hC
22mm 6" thin drive socket
amzn.to/3JJxQ9n
Loctite 243
amzn.to/3NYVIIr
Tall jack support
amzn.to/3M9PB1R
Jack stand pads
amzn.to/3BNP2pR
Jack stands
amzn.to/45sK3IL
5 gallon oil lift drain
amzn.to/3MaaIBg
Milwaukee 1/2" impact
amzn.to/3Icrdvj

Пікірлер: 34

@dirtmonkey1337 2 ай бұрын

White Teflon is perfectly acceptable for use in hydrocarbon applications. The yellow is simply a color added for inspection in natural gas services to make sure youve used teflon tape. I work in an oil refinery and we use white Teflon on every service from natural gas all the way up to as heavy as bunker fuels and lubrication oil. Great video, I'm looking into doing a catch can for my 6.7 cummins.

@neckofthewoods24 2 ай бұрын

its like 3 times thicker, im sure theres more to the compound than just that.

@dirtmonkey1337 2 ай бұрын

@neckofthewoods24 Yes, it is definitely thicker. My point is you can safely use white Teflon on hydrocarbon service. You wrap it more if you need more.

@justatim8143 10 ай бұрын

From my understanding Banks is the best but to me I have never added a cold intake, instead I changed the air filter to a K@N filter on all my vehicles. The only thing I changed was the exhaust to a good stainless exhaust for long life and better exhaust. I have never had a problem or had to buy another K@N filter as I used their cleaner and spray on oil and I kept some trucks to 175,000 miles and 16 years old.

@neckofthewoods24 10 ай бұрын

I’ve done both! Just depends on the situation like this one. The Miata got a K&N I don’t think i mentioned. But the other 2 are CAI’s.

@dwwilliams72 4 ай бұрын

If you own a cummins and have a K&N filter in it, I recommend removing that filter and changing to something else. A few yrs back, cummins put out a bulletin stating that using a K&N filter in their motors would void the warranty.

@leomadero2710 3 ай бұрын

@@dwwilliams72 only k&n or banks to ??

@dwwilliams72 3 ай бұрын

@@leomadero2710 not sure about the banks

@Donkeygap750 4 ай бұрын

Egr=exhaust gas recirculation system

@Donkeygap750 4 ай бұрын

I’m going to design my catch can routing hoses to go straight up from the exit point of the catch can so maybe I’ll catch more oil instead of just bypassing the new can due to it being in a straight or down position line dumping oil into my turbo - all i can do is try it & see what my results are 👍🏼

@joshuaeb09 2 ай бұрын

Stumbled across just seeing what others have done with CC mounting in the engine bay. You really don't want to put a can on that small line, that's the drain from the OE CCV Filter back into the block. If you look at the pricey Dirty Diesel Customs Valvecover/CCV Delete/Catch Can configuration they use that line to drain their can so you never have to empty it.

@neckofthewoods24 2 ай бұрын

@@joshuaeb09 this was only installed on the line going back to the turbo so the suction is very large and powerful to pull out blow by. So I’m not sure what you’re talking about.

@joshuaeb09 2 ай бұрын

@@neckofthewoods24 In the begging of your video you show a bit of concern about the CCV drain line. I'm just calling out that it is indeed an oil drain line back into the pan. The cummins isn't at all like most gas applications where you have a "clean" side and "dirty" side for the PCV/Crankcase Ventilation plumbing like you'll find on boosted Hemi/LS/other applications. You just have the suction side pulling through the CCV - aka where you installed your can.

@neckofthewoods24 2 ай бұрын

o gotcha. 👍

@akosibrian8417 3 ай бұрын

Just wondering if you can share the link where you bought your catch can. Thanks

@neckofthewoods24 3 ай бұрын

No link, just an item on the shelf at tractor supply.

@timarthur7425 4 ай бұрын

Looking to get/make that same catch can set up. Would you fabricate and sell one or at least give specific "parts list" on what is needed. elbows, tubing, catchcan itself .

@neckofthewoods24 4 ай бұрын

Probably not sell but yeah I could do a parts list. Do you have a TSC near by?

@timarthur7425 4 ай бұрын

Yes. Did you get the elbows from there too?

@timarthur7425 4 ай бұрын

Do you have a skull for that separator for tsc?

@user-gj2jj3pq5z 2 күн бұрын

Where did you buy that custom catch can at?

@neckofthewoods24 2 күн бұрын

@@user-gj2jj3pq5z tractor supply.

@BillJames-ld6wq 8 ай бұрын

Hi, Can you provide some details on the catch can, where you bought it etc. Emailing from Australia. Cheers.

@neckofthewoods24 8 ай бұрын

I wasn’t able to find it online from tractor supply. If I’m there again sometime I’ll try to see if I can find a part number or a name.

@BillJames-ld6wq 7 ай бұрын

@@neckofthewoods24 Thank you.

@mikesavage9198 4 ай бұрын

Any check engine light problems?

@neckofthewoods24 4 ай бұрын

Yes, but only one. The intake tube where the filter is clamped onto collapsed around the area where the worm clamp tightens. and even though the air was still being metered, a check engine for some reason. Banks sent me a new tube free of charge.

@that-badass-barber 4 ай бұрын

Just delete the emissions you and your truck will be happier!

@neckofthewoods24 4 ай бұрын

Not when the 22 ECU isn’t cracked and 21’s are going for crazy amounts!!!

@that-badass-barber 4 ай бұрын

Ur right i didn’t catch that part i just deleted my 21 and it’s shocking the fuel mileage im getting and hopefully long reliability

@neckofthewoods24 4 ай бұрын

@@that-badass-barber other thing I may sell. If I sell, I definitely can’t trade in, I’ll have to sell private and to someone that doesn’t have emissions testing. Just really lowers the potential buyers. As for MPG I think I’m stuck around 16.5mpg with the 33’s.