Neewer and Andoer Motorized Camera Dolly Slider | Review | How to Use | 3-wheel

[@OttoJulian_]

Check out or buy these products: ⚡ Andoer Motorized Dolly Slider: amzn.to/3n0cENY ⚡ Neewer Motorized Dolly Slider: amzn.to/34Mj3WT ⚡ Andoer Ballhead Combo: amzn.to/34PWznZ [Affiliate links, which means that, at no extra cost to you, I will make a small commission if you make a qualifying purchase] ========================================= M Y M A I N G E A R: My Main Camera: amzn.to/2YkdZWU Best Vlogging Canon Camera: amzn.to/3kcRP0I My Favorite Lens: amzn.to/37MRSLV My Travel/All Around Lens: amzn.to/2Ym13j9 My Drone: amzn.to/2V7AZq1 My 2021 Fav Drone: amzn.to/3nxsyQw Action Camera: amzn.to/3hz6ku6 2021 Favorite Action Camera: amzn.to/3sBeRDM Pocket Camera: amzn.to/3lU2yhY Compact/Great Mic: amzn.to/3fRmbE5 Everyday Tripod: amzn.to/2YRVPuC Full list of recommended gear: www.amazon.com/shop/ottojulian

[@Ira88881]

Thanks, dude! I ordered the Neewer a half hour ago, and then saw this video so I cancelled that and ordered the Andoer! That ballhead is definitely worth the extra 5 bucks! I’m going to use it for self zoom-ins when vlogging at home, putting it on a table. And I know: This can be a little noisy, but my audio is actually replaced in post anyway. (Long story.)

[@OttoJulian_]

Yeah!! That ballhead for just $5 is a deal! Good to know about your audio! Hope you like this little gadget

[@sORrYiMLaTe_wHAtdiDiMisS]

Yes I'm glad I saw this video in time because I had my eye on the Neewer because of the big discount they had and then saw the end of the video. 😊👍🏾

[@OttoJulian_]

I'm glad it was helpful!

[@PiaJustynn]

Thanks, Otto. My husband got me the Andoer for my birthday to use for my KZbin videod and it does add interest to my b rolls. It carries my a6400 + sigma 16mm f1.4 perfectly.

[@OttoJulian_]

hello Pia! thanks for sharing this info! glad you are enjoying it

[@jannarkiewicz633]

Not a normal Otto review. I have 4 wheel version and I LOVE IT. I scored it for $100 with a $60 off coupon so the 3 wheeled looks cool to. Great for B Roll...

[@OttoJulian_]

cool!

[@markforrest881]

OMG! I need this! I am almost ready to launch my channel and I can see where this device will add a new dimension of professionalism to my b-roll. Thank you, for reviewing this product. I would not have known that something like this was available. Happy New Year ,and keep up the great work!

[@OttoJulian_]

Hello Mark!! Yeah this device is so useful, like someone said, just be careful so it doesn't fall off the table's edge! Happy new year!

[@majidsalim435]

Dude what happened? Still didn’t launch your channel??

[@jer3006]

Great video, Otto! Thanks for showing some usage examples for the dolly.

[@OttoJulian_]

You are welcome !!

[@FullKitchen]

Very detailed and well explained video 👍 I'm thinking of buying it.

[@OttoJulian_]

Thanks for your feedback!! 😃

[@deankud7602]

your such a great youtuber ... you made my day I want to start a review channel and this video was such a great help keep up the great work :)

[@OttoJulian_]

Hey Dean. Thank you so much and good luck on your KZbin Journey!!

[@deankud7602]

ty

[@retrorealtorteam]

Thank you for adding value at the end !

[@OttoJulian_]

My pleasure!

[@TarotRightNow]

Hi, great video thank you! I was just wondering if you can put an extension between the dolly and the camera so it can film from a higher pov?

[@OttoJulian_]

hi, thank you! depending on the height and your current camera/lens, it could be very unstable and for that I wouldn't recommend to do that

[@TarotRightNow]

@@OttoJulian_ thank you for your answer! 🙏😊

[@danoc51]

Great review! You always do such a wonderful job. I've just order one, using your link. It isn't too hard to figure out a lot of uses for this thing. Just don't let it roll off the table edge!

[@OttoJulian_]

Thank you!!! LOL yeah! that's correct! If it falls off the table edge it's game over!! Enjoy your product! it's very helpful without a doubt !

[@SavageFlies]

Man Otto, you have such awesome toys! I absolutely did not need this, and until this morning didn't even know something like this existed. But I ordered one anyway (through your link). I got the Andoer with the ball. I'm thinking I could get some cool b-roll of me sitting at my bench with the camera doing a half circle around me while I tie. One of my first goals of 2021 is to come up with a cool intro. Some drone footage at the river, and a couple shots of me at the vise. Hopefully this thing will help. :-) Great video my friend!

[@OttoJulian_]

Funny story: I never thought I would like something like this lol. But it just became pretty handy on some situations, and it doesn't break the bank either. Thanks for using my link!! Oh and yeah, the one with the ballhead is a good deal! I literally payed $25 for that ballhead alone a year ago!

[@SavageFlies]

@@OttoJulian_ Holy cow... you hit 1,000 on Thanksgiving, and are going to get to 2k on New Year's Eve! I told you your channel was going to blow up!! I was originally thinking you would hit 10k in 2021, now I think you're going to get to 50k this year. Just don't forget about us little guys when you are the BOSS of all KZbin tech channels. :-) Happy new year man. :-)

[@OttoJulian_]

Yeah numbers have been going up lately. 50K seems a bit far away but I like how you seem to have lots of faith in me. Nope, not forgetting about any of you if the channel grows more. I hope we can all keep growing our channels during 2021!! Happy new year to you too Matt!

[@SavageFlies]

@@OttoJulian_ I just got mine in the mail today. This thing is really solid. Not very fast, but I suppose it needs to move pretty slow. And good call on recommending the ball. That will make it a lot more useful! Now I'm going to go put a camera on it and chase my cat around. :-)

[@OttoJulian_]

@@SavageFlies cool! Remember there are 3 speeds. For videos I actually like using the slowest speed. Fast is too fast for my taste

[@danemarc]

Never thought I would need this, but after watching your video Mr. Otto, I definitely want one!

[@OttoJulian_]

Hey Danemarc! I hope you are having a nice week! Happy new year! Yeah I know, this is a cool toy to have for b roll

[@MyOwnOpinions]

So it have ab set point? Or do I need an operator? Does it have sensor to stop at the end of the table or anything?

[@OttoJulian_]

No, there is no sensor. You need to manually stop it or with the remote control

[@VOZM]

Excellent. I have this on my wish list after watching this video. I was wondering whether you can use it on GoPro? Thanks

[@OttoJulian_]

Yes you can!

[@salk007]

Another nice presentation from you. :)

[@OttoJulian_]

Hi sal thank you!!!

[@demetriusbrooks1836]

I have this on my wish list. Question. Does the remote only operate the slider or can you pair it with your camera to take pictures?

[@OttoJulian_]

Hi, it’s just for the slider

[@kevinmartin4787]

Thanks watching from Central Texas

[@OttoJulian_]

Hey Texas! Thank you!

[@EduardoSinatra]

Hey! Does it have an option to move from point A to B and reverse the movement automatically ? like a back and forward movement, to fill yourself without having to be always clicking the remote control?

[@OttoJulian_]

Hello Eduardo. No, it will keep going and going. you have to manually stop it and start it

[@EduardoSinatra]

@@OttoJulian_ yes, that’s sad... but I will order it anyway, it’s very cheap for what it does :) Thanks for your review!!

[@OttoJulian_]

@@EduardoSinatra yeah I do agree! and it truly helps in many ways.

[@cheker288]

This product popped up recently, great review!

[@OttoJulian_]

Thank you Marcel!

[@responsiblecuisine4974]

You are the best Otto, I got this dolly for Christmas and I was waiting for you to make this tutorial but you exceeded my expectations 👏👏 great review 🤩🤩 thanks 😊

[@OttoJulian_]

Thanks Ingrid. Have you used it yet?

[@responsiblecuisine4974]

@@OttoJulian_ No, I haven’t. Today I will I didn’t know how to use it. Sorry for not watching your video earlier. This video is amazing and so complete 👏 thanks

[@OttoJulian_]

😊😊 oh ok. I kept thinking that I made the video too late, but I'm glad that it was helpful. Hope to see some b roll on your videos using this!

[@responsiblecuisine4974]

@@OttoJulian_ 💪🏻💪🏻 sure 😅

[@RobertMizen]

Thanks for the great video dude. This helped me decide.

[@OttoJulian_]

Glad I could help Robert!

[@SubramanyaSarma44]

Great pieces of learning. Brilliant narrative with able guidance, suggestions, advices. Remarkable indeed. Recently I bought a pocket 2 in Sydney. I will be moving to India soon. Any accessories to be purchased here ? Thanks in advance.

[@OttoJulian_]

hi! The only accessories I use for the Pocket 2 are ND filters and an extension stick

[@KrishnaAjithkanth]

Can i use this dolly slider also for vertical videos with my camera? I mean, can i put my cam also vertical and it goes smooth? Thank you!

[@OttoJulian_]

if it's too heavy it might cause some balancing issues. Otherwise it should be fine

[@snithereens]

Excellent Review! Greetings from Germany.🙋‍♂️

[@OttoJulian_]

Thank you Nollie!!!

[@wanderer1955]

This dolly is a good item. I have it. But ppl should know the motor noise is easily picked up by the camcorder mic. Bit dissapointing.

[@OttoJulian_]

Agreed! I really wish it would had been quieter

[@top-voice1674]

Hi, do you know a dolly like this that can auto loop? To film an interview or concert for example.

[@OttoJulian_]

the ones I've tested can't do that

[@ralphypenny542]

How did you lighted your backgroung please?

[@OttoJulian_]

Hi Ralphy. Talking head?

[@marky30mark]

Can i use that on Neewer Camera Slider 67 inches 1/2 Round Circle Dolly?

[@crazytaxinl]

Thanks for the nice video, thumbs up!

[@OttoJulian_]

You are welcome!! Thanks for watching

[@johnheiser2604]

Just bought the Andoer on EBAY with the optional roller

[@OttoJulian_]

Nice!

[@borjalafuentesoy]

Can it be programmed to set a certain maximum distance between turns? Can it be programmed so that the turns are made on their own without having to press the button and that it runs for half an hour straight?

[@OttoJulian_]

No you can’t do any of those

[@SFCFilms]

That’s awesome, I did a search for motorised slider. I am not keen on spending 300+ on slider cause I will only use fraction of functionality, they have their place but for my needs currently they are too much. This is perfect and good alternative and much cheaper option. Thank you. I’m guessing there’s a new model by now?

[@OttoJulian_]

yeah the new model now supports bluetooth connection

[@vedder7373]

Very informative. Thanks. One question though. If I used it to film Vertically, will the balance be off and the camera tip over?

[@OttoJulian_]

Hello Charlie! it will mostly depend on the weight of your camera. If your camera+lens is too heavy it will unbalance the slider

[@vedder7373]

Thanks for the reply. I feel that it would topple over though. Too bad.

[@RollyMagpayo]

thanks for this video. I ordered one now :-)

[@OttoJulian_]

Hope you enjoy it!

[@yenra]

Great review. Thank you!

[@OttoJulian_]

Hi Yenra! You are welcome!

[@therealscoobydoo]

Nice device! I misplaced my remote, there does not seem to be a way to replace it and the iPhone app does not work.

[@OttoJulian_]

Hi Michael! That’s unfortunate!

[@AuduBuba]

Where you in my mind just saw this product on aliexpress yesterday

[@OttoJulian_]

Really? I'm guessing under a different brand?

[@AuduBuba]

@@OttoJulian_ andoerand it's going for less than 70 bucks there

[@AghilesGACEM]

Does it make sound ? Can i use audio with rode vidmic on the cam or will we ear the motor ?

[@OttoJulian_]

It's not quiet, you will hear the sound of it

[@DanDan-li4hr]

have you seen the yelangu L5 version with app control and timelapse? and same andoer L5 brand too

[@OttoJulian_]

hello Dan, not yet!

[@DanDan-li4hr]

@@OttoJulian_ I am deciding between konova tank dolly and the new L5 version. I have not seen any reviews yet

[@OttoJulian_]

I feel that the L5 is the same as the L4 but they just added the app control. If that’s the case it remains being a good alternative

[@Sjaubi-qf6wd]

Umm is it programable . does it stop by itself?

[@OttoJulian_]

Unfortunately not. You need to press a button either on the slider or the remote control to start and to stop it

[@Drrezzin]

Do both brands have the adjustable wheels as far as moving or sliding them out for a longer lens? You demonstrated that beginning at 7:10 into the video.

[@OttoJulian_]

yes, both brands have it

[@Drrezzin]

@@OttoJulian_ Thanks!

[@laragwaysailoilo2898]

Waw..more of that tutorial plz

[@OttoJulian_]

🙂🙂🙂 hi thanks for watching

[@tropicfitness]

Very nice information 👍

[@OttoJulian_]

:) thank you for your comment!!

[@wanderer1955]

Can this dolly take the weight of my Canon Legria G25 camcorder please.

[@OttoJulian_]

It looks like your camera weighs around 550 grams, so it should hold the weight fine

[@wanderer1955]

@@OttoJulian_ 😀 many thanks. Just ordered one. Can't wait!!!

[@JohnSullivanFilms]

Get some half inch conduit pipe and make a dolly track.

[@OttoJulian_]

Sounds interesting

[@rustyreview]

nice review. year later. still working great?

[@OttoJulian_]

I don't use it all the time BUT it is still working like a year ago

[@KennethShinabery]

I think both have the combo. Is Andoer and Newer the same company?

[@OttoJulian_]

Hi. No, they are different companies

[@squidskunk]

you didn't cover how loud it is...how much noise does it make..? can it be used with microphone recording close by at the same time..?

[@OttoJulian_]

Sorry about that. Yeah the mic will pick up the noise if it’s close

[@squidskunk]

@@OttoJulian_ thank you

[@paulmaher1705]

Neewer do another model which is about twice the price, it has a smartphone app for operation, not sure what other extra features though?

[@OttoJulian_]

do you know what model is it? just write the name, don't post links or it goes to spam, thanks!

[@dba9923]

Does this work on canon eos m50?

[@OttoJulian_]

Yes it does !!

[@George-vf7uw]

Do you think this will hold a Pocket Cinema 4K with a medium lens?

[@OttoJulian_]

What would be the total weight? It was holding my A7iii with a 24-105mm lens

[@George-vf7uw]

@@OttoJulian_ with the lens I have, estimated 960 grams

[@OttoJulian_]

@@George-vf7uw heaviest setup I used was over 1200 grams. it did struggle a bit mainly because of the length of the lens but I think 960 grams should be fine

[@George-vf7uw]

@@OttoJulian_ awesome. Thank you!

[@stickapot3623]

THANK YOU

[@OttoJulian_]

you are welcome!

[@Ayan-ty5vb]

From what camera you shooted the cinematic video

[@OttoJulian_]

Sony A7III

[@Ayan-ty5vb]

@@OttoJulian_ that is so expensive please make a video on insta go 2 360 I can understand things better from you if you dont have then just make a video how to make super cinematic video with any mobile

[@OttoJulian_]

working on it! thanks!

[@Yasserwarak]

I liked your review move on

[@OttoJulian_]

Hi Yasser thanks!

[@KennethShinabery]

Curious how loud is it?

[@OttoJulian_]

There is the sound of the motor, it's not too loud but you will definitely hear it

[@argusworks1075]

Is there a App for control the speeds for more slow and more fast movements?

[@OttoJulian_]

Hi. No, just the remote control

[@StrillLife]

Looks pretty nifty. The HowToGuy broke his. I'm still on the fence. I want 1 but not in the budget at the moment.

[@OttoJulian_]

really? how did he break it? lol. This camera dolly is pretty cool. When you have the budget you should consider it

[@StrillLife]

@@OttoJulian_ lol. I had to go dig thru his catalog to find the video. I'm kinda impressed looking back because I probably watched every one (from when ever I found his channel but I digress). I think this the video where he either broke it our tried to repair it. kzbin.info/www/bejne/qJCpmaeDlJtsoas

[@kmart014]

Other than shooting close ups of food or products, what else could this be used to shoot. Cause it doesn’t seem like you can take this out in nature and use it.

[@OttoJulian_]

hi there, you could if you can place it on a flat surface. It's limited, no doubt about it, but it will just depend on what you are doing and it's not too expensive. Also, there are some manual sliders where you can actually fit one of these devices at the top

[@agarwalamit662]

Hi, when we attach the camera directly to this 1/4 screw it is not always pointing to horizontal or vertical direction .. we need to tight the screw to become center align .. is there better way to do this ?

[@OttoJulian_]

Hello Amit. Using a ballhead is the best way to go

[@agarwalamit662]

@@OttoJulian_ will the setup not become too heavy using the ballhead ..?

[@OttoJulian_]

@@agarwalamit662 not really, unless your current setup is too heavy. Ballhead should be around 200 grams... the one I use is 175 grams

[@agarwalamit662]

@@OttoJulian_ thanks a lot

[@OttoJulian_]

@@agarwalamit662 you are welcome!

[@bougelemouge]

Could this pull off a parralax interview shot?

[@OttoJulian_]

Hi. This goes kinda fast even on at its slowest speed.

[@bougelemouge]

@@OttoJulian_ the one I just bought the speed is fine. It's just so hard to get such a specific angle set up from that kind of distance to keep the subject in the centre whilst the background curves

[@OttoJulian_]

I see what you are saying. Yes, I really wish that setting up different and specific angles was easier.

[@bougelemouge]

@@OttoJulian_ I'll let you know if I crack it before I can afford a proper slider haha

[@prynzzzy]

how to make this move back and forth?without having to press the button everytime

[@OttoJulian_]

Hi, it will not do it automatically, it has to be done with the remote control or the button on the device

[@ra9r]

A real example of the sound that this device makes would be helpful. I hear that it can be really loud but actually hearing it would be very helpful.

[@OttoJulian_]

Hello Rodney, you are right, not sure why I didn't include that. The camera will definitely pick up the sound, I only use it for B roll

[@ra9r]

@@OttoJulian_ I hear that it can be very noisy ... is that true? Your point about B-Roll is a fair point. It would only be an issue if I wanted to use it while trying to record me talking during a movement.

[@OttoJulian_]

@@ra9r your camera will pick up the sound of the motor for sure. Filming yourself might not be a great idea with this (unless you don't need the audio)

[@1NV4S10N]

The only thing is they need a blue tooth body strap that picks up your movement without the remote button.

[@OttoJulian_]

thanks for watching the video!

[@mr.frandy7692]

i was needing some movement in those low angle wide shots whenever i'm at home bangin the ole lady. this should do the trick!

[@OttoJulian_]

wait what? I don't want to ask what kind of content you are making lol

[@Ayan-ty5vb]

How much is it I mean what is the price

[@OttoJulian_]

Hello Ayan. On the video description you will find a few options for this device and there you will see the exact pricing

[@Ayan-ty5vb]

Is there a camera in this

[@StringerBell]

LOL even though the footage is stabilized in post (obviously) it's looking aweful

[@OttoJulian_]

lol I don’t even think I had an editor with stabilization when I made these videos. Try harder

[@OttoJulian_]

And besides, this is not a stabilizing device, it’s a slider.

[@Latvijasfans]

Complete crap! After 30 min of using motor give up - something crashed inside and it works, but no spinning the wheel.

[@OttoJulian_]

😧 for real? Wow. Can you return for warranty? I use mine twice a week and no problems so far.

[@Latvijasfans]

@@OttoJulian_ now I have negotiation with seller from Amazon.fr. Let's see... I found in youtube that one guy has the same problem. He changed that small dc motor and put new tire from robot 😊

[@OttoJulian_]

@@Latvijasfans oh wow. I hope they send you a new one, if you bought it recently Amazon will most likely do something about it if the seller won't.

[@Latvijasfans]

@@OttoJulian_ bought it a year ago. Until yesterday I used it very rare.

[@ChevroletEpica]

Thank you

[@OttoJulian_]

You're welcome