Nelson p200 big gun watering a grassy field

Got good footage of this p200 while running and it’s got some massive range even got me wet from the spray from the wind.

[@randyvanheusden732]

It appears from what I am learning about these big guns is that Nelson is the big name in this field and I have not heard any mention of the XCAD Aqua Burst big guns. I am still learning though.

[@NelsonBigGunP200Fan]

I have not had any experience with the XCAD guns at all. The dealer has a SR200 and a SR150 in the gun trailer but they're missing parts for the base. And cost for getting them fixed up to operating condition may be too much. I believe the XCAD guns are just rebranded SR75s

[@zahirapancanachanel9675]

very good for watering the dry season. greetings from Indonesia

[@sungkono7305]

Beli mas , Rp 28.000.000 sr 200 , belum ongkir 😁😁😁😁😁

[@NelsonBigGunP200Fan]

This is actually a P200 which is like a SR200 but it reverses fast. There's a lot of these where I live. People still use these on travelers and solid sets.

[@sungkono7305]

@@NelsonBigGunP200Fan ok chris , So, how far does it shoot and how much does it cost?

[@NelsonBigGunP200Fan]

About 300 feet or so and they require 250 to 1310 gpm to operate depending on nozzle size. There a 3" flange mount sprinkler. Also this is not made anymore, the fast reverse guns have been replaced by the SR200 series which are still made now. These do not reverse fast but they go both directions 1 speed. A SR200 may end up costing you about 1200ish?

[@photocontrol]

I like that Nelson P200!!

[@NelsonBigGunP200Fan]

Yeah it’s working with a lot of pressure too. So it’s putting out massive amounts of water

[@NelsonBigGunP200Fan]

If you ever get a chance to get a pump that can run one of these id love to see a video of it. That’s of course if it’s cost effective these guns are expensive

[@NelsonBigGunP200Fan]

Also did u know these are rated for 250-1250 gpm depending on nozzle size ?

[@thesprinklerguy4875]

That's a lot of water!!!

[@photocontrol]

@@NelsonBigGunP200Fan Whoa I wasn't sure how many gpm these were rated for! They can sure shoot a lot of water!

[@NelsonBigGunP200Fan]

This one whips back super quick. Must not have the brake set right. The drive arm doesn't move from the force of it reversing

[@thesprinklerguy4875]

I wish I could see one of these up close, I've only seen one in use and that was last year, I couldn't get a video tho :/ I have always wanted one of these for my collection even though I would never be able to run it

[@NelsonBigGunP200Fan]

Me too. I know of a place that has a few of those P200s on solid sets. I can walk up and touch them but they havent been running in years

[@NelsonBigGunP200Fan]

I know of a place that has one on a solid set that waters a bean field and it’s set for full circle. The stops have been removed. It’s leaning too cuz of all the force of the water that the gun emits it’s made the solid set crooked

[@NelsonBigGunP200Fan]

I'd like to have a PTO pump so I could run one of these. Would be sweet.

[@NelsonBigGunP200Fan]

Get you a big swimming pool and a pump like mine and u can run up to a 150 with a .70 or .85 nozzle. My pump can handle that. It's a pretty good one. My next goal is to get a bigger pump to run my 200 guns i have

[@Brennin87]

What pressure you have?

[@user-yu3hh1lg6i]

What is the brand of the water pumb?

[@NelsonBigGunP200Fan]

No clue. Not mine b