NeoMag Alias - A GAME-CHANGER for EDC?

[@dustyball3885]

Did you know the Alias belt mount is adjustable and able to expand to fit slightly larger belts?

[@GroverRover]

I'm a smoothbrain, I had no idea! Just adjusted it and it fits the Ciguera like a charm. I'll add a card in the video at that time to clarify! Thanks for the heads up.

[@KBlaze13]

We all have those derpy derp moments lol. I realized as soon as you were putting it together that the spacers should be in between. Also, I'm waiting for mine to arrive this week. Got the mount coming already attached to my holster from the factory. Also got their beltless receiver setup. Good video sir.

[@krmtdfrg]

I just got this system but I went with the belt less option also with the same type of holster as you. The belt less works great with sweats and basketball shorts when you want to be casual/comfortable but still carry easily.

[@inando9226]

Appreciate the review 💯

[@aubreyhanson70]

Great video. I run the alias system with my rig along with one to mount under my desk.

[@Keen_Edge]

Is there enough space between the desk and the grip of the gun to actually get you hand between the two in order to draw?

[@aubreyhanson70]

@@Keen_Edge Sorry for the delay, I just saw this. Yes there is plenty of room to get your hand between the desk and the grip. Very easy. Quality product, I would not hesitate to get this setup.

[@Keen_Edge]

@@aubreyhanson70 I appreciate the follow up. I wanted to mount one in my car, but it looks like it must be mounted inside of a compartment in the car in order for it to be legal in my state which just doesn't make much sense to implement in my opinion.

[@boomdoggy]

Very well presented and articulated 🇺🇸🇺🇸🇺🇸

[@jaylea4553]

I use the bottom mount with my Werkz holster. I find I am able to use the belt attachment instead of the claw with the lower mount were the light is to help push he gun into my body. Give it a shot, you might like it.

[@SpeakTruthKindly]

You likely need the spacers for it to fit correctly with that set up.

[@scottmurray2239]

The spacers go under the Mount on your holster. That way you have clearance to allow the reciecer to accept the holster mount

[@kkorff]

You showed the wrong NeoMag clip for Glock mags. Because the Glock mags have a plastic coating, NeoMag makes a dual magnet version for Glock mags that is perfect. Just order the clip for the correct caliber, 9mm for the G19, and you're set. I prefer the extended clip so the mag sits deeper in my pocket. You can cheat the mag up the NeoMag for better access if you anticipate doing speed reloads. With a little practice, you can be lightning fast.

[@christopherreeves7915]

Your suppose to use larger spacers so it leaves enough of a gap on the holster clip so you can tuck in your shirt. It is recommended that you use the spacers that came with the Alias.

[@lajuanjohnsonbtc9634]

Do you have a comparison of the Alias vs. Phlster Enigma? Which can you move better in ? Which do you prefer?

[@jamesdelong6401]

Nice now how video. Yes sir next week I'll be order mine next week. A lot easier. Especially for me. I have Cellebel palsy on my left side. It'll really nice to have. Especially when going to a public restroom. I love tier 1 appendix holster and their clips. Their clips can be a pain. Question for you. I have both 1.5 leather kore belt and 1.75 tactical kore belt. Will the Alias belt clip, clip to both 1.5 and 1.75 belts?

[@920WASHBURN]

I think they have different sizes. But both have some adjustability

[@GroverRover]

The Alias should fit both. The clip itself is adjustable in width via a small screw on the back.

[@TheGman228]

influenced intensifies

[@jeffgeesaman4386]

So you've had this for 2 months. Thoughts? It seems like it might push your belt out quite a bit farther than normal clips. Is that the case? Does it print more than regular clips? thanks. Great initial review.

[@GroverRover]

This is hands down the best mounting system I've come across. I haven't noticed any of the belt being pushed out farther as a result. I originally mounted it incorrectly, and once I fixed the mounting system it was much closer to the holster. It's comfortable, very concealable, quick and easy to use... I really can't praise it enough.

[@rtehcs000]

I just received my Alias system. It has screws to allow a little extra width for belts where needed. However, I have the Nextbelt Supreme belt, and one of the Alias belt receivers will not tighten down enough to not move like the other receiver which stays put - definitely not happy about this.

[@williamwinn948]

love mine.

[@ixcancel]

I got mine. I like it, but added me an 1/2 inch of printing.....

[@Duwils]

I ran across this a few days and was curious about the best option for my M6 Werkz for my Sig P320 as the plastic clips and dual belt clips are the worst. Now to do the low mount or the high mount as I prefer a deeper conceal? I have both sitting in my cart and may just grab both as I'll need to figure the rig for my G23 Gen 5 with an Baldr S.

[@kevinhagberg1929]

Will this fit a Kore Essentials 1/2” leather belt?

[@believeinjesus8300]

Did you just order the top mount and it came with the belt clip and everything else. Or do you have to order everything separate?

[@seawaterr]

no you pick the clip for your holster, then pick what receiver you want. they have bundles where you can pick what you want and order it all together. but if you don’t do a bundle they are all separate

[@believeinjesus8300]

@@seawaterr thanks

[@jessegonzalez8238]

they say to use the button on the side of the alias but instead i use the side button on the bottom just slide and pull on your holster and your good, looking for the other button on the side is a little hard.

[@user-fb4nl8dn7u]

0:21 do these work with a 1791 leather holster AIWB?

[@toddhicks9952]

spacers go between the claw and the holster

[@paulhancock8472]

I'm really curious. Who would be with you while you're putting your belt on that you also want to not let them know you have a gun belt. I can't imagine the noise of a ratcheting gun belt having anything to do with concealed carry.

[@GroverRover]

Public restrooms

[@jonnnn4895]

Did you know u put the spacers behind the mount and screw and washer in front so it spaces it out for your pants

[@_crawford_33]

So if you wear the Alia’s on your belt when it’s not attached to a holster does it move around? Because mine does but not sure if it is the belt or if it just moves freely when no holster is attached

[@GroverRover]

No the receiver should stay in place with no movement. Check out the pinned comment from Dusty, you can adjust the receiver width in and out to adjust the fit so it’s tight on your belt. It should be able to slide on, but not slide around without you grabbing it and moving it.

[@ricknelson749]

Does anyone know if this will work with 1.5 kore belt?

[@GroverRover]

It definitely will! I was incorrect in my video, the Alias is adjustable to fit different width belts. I use mine between both a 1.5” and 1.75”.

[@ricknelson749]

@@GroverRover Got it thanks 🙏

[@ericdabbaghchi3974]

I need to get a belt less alias

[@effu9375]

Did the alias come with instructions or no??

[@eyesnearstactical]

Excellent review! I’m ordering the Alias belt less receiver due to I wear shorts and joggers a lot more than jeans or pants. I will definitely do a review. I subscribed, check my review on my Tier 1 Holster. Stay blessed!

[@brianredban9393]

Are you sure there is nothing else in your holster

[@2Lives2Liv3]

You need spacers bud, they come with the hardware

[@cz1always608]

So will it work with a 4:00 cant obviously with the short clip ?

[@920WASHBURN]

Seems good but a hundred bucks for 2 clips is a bit much

[@baxrok2.]

No way.

[@tacticooltaco]

First

[@DieselRamcharger]

yeah you dont carry that shit every day. good try though.