Alias FAQ: Receiver Belt Setup

[@forensicpreps4508]

Just received mine and this was perfect for getting it tighter on my Kore dress built. Thanks!🙏🏻

[@coalakida]

What I did was to place a small sliver of Adhesive Neoprene Foam on the inside top and bottom , worked like a dream. much more secure and works now on all my smller belt sized even the Track Force dress belts less than 1.5 .

[@Razor6On3]

Just bought a setup for the rig, I love this idea and product. I'm outfitting my whole area with these.

[@NeoMagUSA]

That’s awesome! Thank you for the support!

[@Jasondranoff]

Just got the Bottom Clip and receiver for my T-Rex Sidecar, took off the mag holder and I love the system!!! It allows me to keep my Kore essentials belt buckle in the front and not off center because the bracket pushes the buckle out just enough where it clears easily and you need way less room because there are no clips needing to go over the belt...... The fit is so secure I love it, I'll never go back to a clip system. This will be on every one of my holsters going forward. This is more secure than DCC clips IMO... Very Happy if you're on the fence just do it.

[@NeoMagUSA]

So glad you like it!!

[@ytbenavraham9553]

Fantastic product. I use on all of my belts and holsters IWB. The customer services is amazing Psalms 144 KJV

[@NeoMagUSA]

Thank you!

[@jamesdelong6401]

Great video. Just got my setup in today. Loving it!!! way easier and STRONGER to use than the plastic clips normally that comes with holster. 😎🤘💪🇺🇲💪. Great product

[@NeoMagUSA]

Right on! Glad to hear it!

[@jamesdelong6401]

@@NeoMagUSA good morning. I also love on how they pull your pistol 🤏 a little closer to my body. Once I can, I'm going to order some other things from you all.

[@deloriansmith7357]

Any way to make the holster "clips" tighter to the body. I find the system pushes out the belt with the receiver a little too far... idk if I'm alone in this. Also recommend running t1c Axis elite with 1 receiver mount clip ,with t1C belt clip on other side car

[@eusebiotravissevilla6508]

Looking forward to testing mine out.

[@NeoMagUSA]

Let me know how it's going!

[@claytonstoy2868]

So if your holster has 2 clips you'd need to and just stack them ? Couldn't find any info regarding. Thank you

[@NeoMagUSA]

Depends on the holster. If its a holster/mag holder combo you will need two. If its a single gun holster that came with 2 clips you will only need one.

[@alextrujillo8658]

Does this fit 1.75 belts. Is this system compatible with the bravo concealment holsters?

[@NeoMagUSA]

1.75 is coming. It will work with Bravo holsters. You will want the bottom mount clip.

[@alextrujillo8658]

@@NeoMagUSAawesome do you guys have a time frame? I’m going to purchase this system here shortly but if I can order it all together that would be perfect.

[@NeoMagUSA]

@@alextrujillo8658 it will be next year. I don’t have a timeline. We are still working through R&D making sure it’s right before we launch.

[@NeoMagUSA]

@@alextrujillo8658 Q2-3 of 2023 probably.

[@Bl4CKBiRd1]

@@NeoMagUSA any update on 1.75”?

[@Baghdaddy2003]

Love the Alias where you get the hat?

[@NeoMagUSA]

It was a gift, I'm not sure. Glad you love the Alias!

[@fathertime209]

Will this work with a groove life belt that has a little flex to it? Thank you...

[@NeoMagUSA]

No, those belts are too flimsy.

[@a13jo]

My crossbreed holster use two clips, so for this system I need two recibers, right?

[@NeoMagUSA]

Most crossbreed holsters dont work especially well with the Alias.

[@a13jo]

@@NeoMagUSA sad to hear that but thanks for the honest advice.

[@galeriafuentes]

This wont work on hunter constine belt?

[@NeoMagUSA]

No this will not. Hunter has a great belt, but this is an Alias Belt System using our Alias Receivers

[@jmartel2]

@@NeoMagUSA Yes they can work i am using this setup and no problems

[@AJ7304]

I just wanted to ask, cause I have that kinda BA Hybrid belt... But I just get the answer... Thanks!😁

[@marcusaraujo2392]

comprativel para cinto kore 1,75"?

[@victorortega1922]

For a wall or behind a desk hell yeah I'd have to try it it just seems like a lot to do instead of using clips that just go over the belt

[@HerroYuy246]

It’s harder to see then clips

[@timcavanaugh1167]

Anyone know if the 1.75” is on the market?

[@cjgale8007]

will it fit on 1 inch belts

[@NeoMagUSA]

1.5” belts only

[@superdhampton1]

will these fit on a hanks belt

[@NeoMagUSA]

I’m not sure. Leather belts can tend to be too thick. If it’s .2 or under you are good

[@jeanmorales6159]

I have a 1.5 belt and it dosent fit

[@NoCause07]

Bought this whole kit imported to South-Africa and does not slip through any belt loops. Really disappointed :(

[@NeoMagUSA]

You should watch the video and see how we put it on. You don't want it to slide through belt loops. You slide it on the belt and it stays positioned in one location.

[@ryanrogers3255]

I have the same problem, also in South Africa. Mine arrived today, and I can’t get it through my pants belts loops.

[@Kali-vl5cw]

This won't fit the 2nd amendment belt and it's 1.35 inch

[@jorgegollo7004]

Quiero comprr para rgentina como ago ya que no se ingles

[@bull5919]

sad thing is they never show how easy it is to take your gun/holster out of this receiver

[@NeoMagUSA]

A vast majority of our videos show just that.

[@92bravotipofspear]

Just got this...good design but to a trained eye...easy to notice...the receiver is bulky.....

[@tpickering99]

I’m glad I’m not the only one who thinks the receiver is bulky! I thought it would be slimmer than my holster clip, but it’s not. Maybe I’ll use mine in the winter when I’m wearing bulkier clothes.

[@michaelmyers4176]

It is bulky but in my opinion even in the summer it’s a fantastic system. Bulky or not it’s much more compact and comfortable than a paddle holster. You have to know what you are looking for to see it. It’s definitely better than the regular style clip that definitely shows and definitely looks tactical ,more so than the Alias system. I know definitely my carry is where I mount it. The belt less system is a great option as well. I wear my Alias always.

[@matthewchisnall1061]

Too bad you don't make anything to hook up to a battle belt

[@NeoMagUSA]

Our Alias belt system replaces the battle belt with a belt system capable of doing IWB and OWB all in one!

[@jeanmorales6159]

Video is super unclear.

[@ricksalazar2458]

Uggg. Screws to loosen and fall off. I especially don't like that it doesn't encircle the belt. It might work fine, but I'm not betting my life that it will be there when I need it to be there.

[@NeoMagUSA]

See my response on your comment in the 36 second video.

[@bcbutler35]

@@NeoMagUSA link the video!

[@pj4433]

Loctite?

[@reedbanaszak2661]

Did you watch the video? Use blue loctite, it won't go anywhere. Plus if you're using any halfway decent belt made for carrying, it will be stiffened, possibly even reinforced, so that it will not roll on itself even if you try. It doesn't need to encircle the belt to get more than enough of a grasp, and if it can't, id stop worrying about neomags reciever and start worrying about buying an actual carry belt.