Nerf Fortnite 6-SH Revolver Ultimate Mod Guide?!

In this video, we talk about removing the barrel to make the blaster N-Strike compatible, upgrading to a new spring and how to do that, removing the AR (air restrictor), removing the dart posts and doing some shell cutting to make this blaster short dart compatible. I talk about this project and the firing test and chronograph performance results up front, so if you are casually interested you can just watch that. For the more adventurous, the entire guide is after that. I left in a few mistakes I made, just in case you make them too! Or, so you can hopefully avoid them. Hope you enjoy this modification guide for the Nerf Fortnite 6-SH hammer prime blaster!
My video about removing that Fortnite barrel in case we are too late haha
• Removing the Nerf Fort...
KZbin channel for ZDL - get the short dart 3D printed parts link in his description!
• Nerf fortnite 6-sh rev...
3D printed n-strike lug here:
www.thingiverse.com/thing:493...
Not Nerf related, but, here is my girlfriend and friend’s channel I mention during the mod! TwoBoardBroads
/ @twoboardbroads
00:00 Mod overview
04:31 Chronograph results
10:00 Overhead view
12:14 Shell cutting
19:35 Spring swap
22:50 Removing the dart posts
26:08 Fit issue closing the blaster
29:40 Removing the air restrictor
42:30 Another problem closing the shell ha
45:02 The end

[@dgresham2729]

The king of hammershots, Tripp Miller of Radioactive Designs, might be able to give you some pointers. I believe he's said that removing the AR can be a mixed bag, because the plunger tube "floats" to take pressure off the rotating cylinder. Without the AR, air can escape before the plunger tube gets pushed back against the cylinder to make a good seal. You may benefit from beefing up the cylinder seal with mega dart foam. Good mod guide!

[@maritimefoam]

This is good info. Springers in general are not my strongest point and maybe. I should also revisit this to see if I can get a better seal. I know there is potentially way more power here to be had looking back at this in the past as now me haha.

[@josephgrant4636]

As a friendly update to abyone trying this mod, if you line up the shell cutting justbright, you actually keep the retaining post holding down the part the L shaped printed piece is doing. A dan of super glue in the cylinder retention pin housing and you dont need the L piece at all. Furthurmore for these without printers, a scrap puece of nerf barrel material should work for the curved part. Happy modding and shout out to Maritime Foam for such an in depth detailed guide. Much love!

[@maritimefoam]

All good advice! I’ll try that if I do it again!

[@josephgrant4636]

@maritimefoam same here! And that's all the excuse we need right? 2 hand cannons are better than 1

[@beansdudes]

this amazing im sure that im picking this mod up

[@TheVinitsaini]

Thanks for the video, I was able to restore my hammershot referring your video. Fitting trigger spring was tricky.

[@maritimefoam]

Glad it helped!

[@twoboardbroads]

Thanks for the shoutout! Much appreciated. 💁🏻‍♀️😄

[@xfoxgames]

Im liking those mods, it looks really good!

[@maritimefoam]

Threw everything but the kitchen sink at it haha. Performance is a bit under what I had hoped, but it is improved and a child can still operate it, which around here is nice ha.

[@lstudios3237]

OMG i so will need this, i wanted to mod the 6-SH this will be a life saver :D

[@maritimefoam]

Awesome :)

[@nirojacinto1864]

these are the things we want hasbro! not some garbages!

[@Unnamed-Cowboy]

These are great ideas for mods, im going to attempt to do these on mine

[@maritimefoam]

ZDL on KZbin is pretty brilliant, ideas from there mostly for the loading!

[@jonathanrichard582]

Your muzzle is so nice i wish it was made like that in the first place. I found a guy who made 3d short muzzle kit and drum but its more expensive than the stock gun loool

[@maritimefoam]

Ah, this is where printing is nice. Someone made that n-strike lug and then I used an old retaliator part and lots of glue to change the barrel over :)

[@allencarey7336]

I cut that piece out before I actually saw it done by anyone else to load short darts from the back I just left it open and it works great! Haven't removed the AR yet but I want a little more performance so I think I might. Btw I got that new adventure force(buzz bee) 6 shooter that's out now that looks like the reflex 6 and removed the AR that thing shoots almost 90fps now most performance I've ever gotten from removing an AR it went from 70-75 to 85-90 kinda crazy!

[@maritimefoam]

That's cool! I have that blaster now I should try that too!

[@Acemans]

hey been new to the nerf stuff and wanted to know where to get springs that are the right size?

[@user-wj3zc2uf3c]

Друг! Брат! Ты крутой! 😁👍👍👍 Спасибо тебе большое! Без тебя бы я никогда не собрал этот 🤬🤬🤬 бластер... 😂

[@Jalopymedia]

im gonna give it a go. looks cool. maybe get a 9 round cylinder for it

[@maritimefoam]

Sweet! Do it! Good luck!

[@arubaladebi3922]

wow just wow

[@nirojacinto1864]

yes sur!

[@natashasutherlin8293]

My son took his apart to take the barrel off the and in the process the rest feel apart, do you have a reassembly video? I obviously know nothing about nerf guns or how guns work..

[@maritimefoam]

Hmmm, I put it back together at the end of this video I believe!

[@jakeshipe]

My sons Fortnite revolver broke. Do you know where I could get a hold of a schematic diagram for the 6-SH to put it back together?

[@maritimefoam]

Hmmm, Captain Xavier might have an assembly guide maybe? Otherwise send me a pic if there are any parts you aren’t sure where they go! Just send it via Instagram (@maritimefoam)

[@jakeshipe]

I actually figured it out by continually pausing your videos. Is there a place in general where there are detailed Nerf gun schematics in case I need to fix or rebuild something? Who is or how do I contact Captain Xavier as you suggested?

[@maritimefoam]

@@jakeshipe oh good! It’s kind of all over the place. Feel free to ask me, if I have a blaster I’m usually happy to crack it open, for Captain Xavier I was more saying having a peek in case he already has one :)

[@suckstosucks3255]

can you mod the ecs 10? removing the carry handle?

[@maritimefoam]

That’s actually one I don’t have! I’ve seen a couple come up, but seemed expensive - but still looking!

[@pexavex7295]

Could I make it theoretically rear feed full length darts?

[@maritimefoam]

Sure!

[@pexavex7295]

@@maritimefoamthank you!

[@BKG35]

Please make a tutorial on how to reassemble it I opened mine up and it fell on ground now i need to reassemble mine

[@maritimefoam]

You should be able to see from the internals! Go slow! Check out photos of the internals as well online!

[@rymanjones3]

can the rear-loading port be put on the right side?

[@maritimefoam]

As I recall all the mechanisms are on the other side of the shell so no, it unfortunately doesn’t have the shell room to be set up easily for a lefty… unless I’m wrong :) going off memory here

[@Pozibly0706]

Is it possible to buy one already modded?

[@maritimefoam]

I’d sell this one but I didn’t do the cleanest job on cuts haha

[@admiralquack2797]

Would you sell these pre-modded? I would buy

[@maritimefoam]

Time is my enemy unfortunately :(

[@fznyahoo]

Hey how to fix Fortnite 6-sh cylinder? Mine doesn't spin anymore when I prime it :(

[@maritimefoam]

Have a look carefully at the reassembly, there is an arm that fits into some gears to turn it: also there is a very specific groove the cylinder fits into.

[@fznyahoo]

@@maritimefoam thank you it spins now but where do I put the spring with 2 holes? check my short if you don't understand

[@Jhonnyboymarston]

What does a air restrict do?

[@maritimefoam]

Keeps the plunger head from slamming when there is no dart loaded. Which can lead to cracked pieces. Air restrictor is a spring loaded piece that slowly lets the air out when it’s fired empty, cushioning the impact.

[@Jhonnyboymarston]

@@maritimefoam thanks

[@asillyscallywag]

Where can I get the spring?

[@maritimefoam]

Out of Darts has em

[@asillyscallywag]

@@maritimefoam thanks

[@jonathanrichard582]

Where did you get the spring

[@maritimefoam]

Out of darts. Pretty sure I say in the video somewhere which one it was. The same one as the hammershot. A 5KG

[@jonathanrichard582]

@@maritimefoam i tougth you could buy it seperatly

[@maritimefoam]

@@jonathanrichard582 you can. I bought the spring from OOD

[@FrankNelson1310]

Where do I buy it I have the normal one

[@maritimefoam]

Buy what? Springs? Parts? :) the blaster? :)

[@FrankNelson1310]

@@maritimefoam the gun

[@FrankNelson1310]

Mod

[@maritimefoam]

@@FrankNelson1310 you can buy a new spring for this blaster from OutofDarts.con so you can mod it :)