Today on American Foam I disassemble the BASR-L FORTNITE sniper rifle and mod it to perform just as good as it looks. Mods include: Spring upgrade Lock removal AR removal Detachable stock mod Mag compatibility mod
Пікірлер: 171
@justajolt4 жыл бұрын
This blaster is awesome! I didn't bother with AR, spring and lock, so you've gone three steps better than me ^_^
@AmericanFoam4 жыл бұрын
But minus one for me since I didn’t make a storage stock/llama caddy.
@justajolt4 жыл бұрын
@@AmericanFoam That is a pretty big plus. Especially filled with Llama!
@theSgamer692 ай бұрын
@@AmericanFoamI have been trying to remove the air restrictor but I just can't. I tried to Dremel the back end so the loose cap could come out but I don't want to sand too much so I have been trying to get the cross piece out but that doesn't work so can you please help me (if you have time 😕)
@dangerousrobot96922 жыл бұрын
This was helpful when i had to completely take apart this guy to remove one of the bolts and i couldnt figure out how to put it back together, thanks.
@npermgd3 жыл бұрын
this blaster is pretty cool. it's kind of a tri strike reskin but with the extra fortnite deco. I'm glad it has some decent mod potential with a direct plunger
@Taj26734 жыл бұрын
Awesome video Brad. I really liked how u rearranged your blaster wall.
@grulple58633 жыл бұрын
Just a heads up, there is a new version of the blaster that has different priming handles, they have thin tabs instead of a full big tab. Anyways this new updated design can take the magazines with bumps in them without having to mod it. I just got mines today and was wondering why it was different and when I put in an 18 round mag it fit inside and there was a grove on the blaster already which was an awesome update. Sorta like how they fixed the recon mk 2 after a while.
@PestoPla2 жыл бұрын
Is this the blue one?
@alexz74323 жыл бұрын
Brilliant video! Awesome work very detailed and since almost no video and much info about modding the basr-l online. It helps a lot. If possible, can you do an advanced modding about bolt sled or bass breech in the future? I was pretty new to modding and am not sure which other model modification fit the basr well. Not much can be found to mod basr from worker and other sites :(
@Michael3sRing Жыл бұрын
Do you need the pointy part of the plunger tube that blocks the top of the dart when it’s in the chamber
@davidgianonatti3 жыл бұрын
How did you manage to remove so easily the handle ?? On my end it's impossible :/
@GalaxyGt_the_real Жыл бұрын
same
@Spoonlord1233 Жыл бұрын
Around the orange clips there ate two pole things and if you remove them it works better
@MikeTypeX2 ай бұрын
@@Spoonlord1233this comment saved me. Thank you so much
@Spoonlord12332 ай бұрын
Np
@howeslife444 жыл бұрын
Holy crap, a mod that I think I could actually do!
@Hunter-pw1px4 жыл бұрын
Nice mod pretty smart putting a different mag well on it
@tatebusch20512 жыл бұрын
Could you make a video on how to put it back together with stock spring and with a closer view it’s hard to see and for the past 2 days I’ve been trying to fix my little brothers and it’s just not working.
@b.pyromane60102 жыл бұрын
Since it is mostly a retaliator internally, I would put in a long brass barrel and some steel internals and a more tougher spring
@roscoonlie2 жыл бұрын
How do you take the stock off after installing it? My sons nerf has something wrong on the inside and a I can strip it down due to the stock?
@MetaFourAerial4 ай бұрын
We have a new version of this. New colors. Form Target. Stopped firing after a day. All of the springs and firing mechanics work. But there’s a small plastic stopper near the front of the chamber that was on a pin swinging area that fell out. I found the little clamp looking spring but can’t figure out how to reinstall it properly. A sit only allows one shot to fire successfully but then afterwards they all get jammed. It’s where the firing pin chambers the dart at the front just before the barrel. Any thoughts? I’ve got a phot but can’t post it.
@alanjagroop12822 жыл бұрын
What about bananna mags. And barrel mags. Will those work as well.
@bedwetter10053 жыл бұрын
How can we remove the orange tab that’s on for re-cocking the chamber?
@superwakky29473 жыл бұрын
does this work with aftermarket retalitor parts?
@HungryHobos Жыл бұрын
I found using a 1/2 drill bit fit perfectly in the front of the AR a few turn by hand and the internals just fell out.
@DerTestMichel3 жыл бұрын
I personally would not cut the blaster because the 25 drum works very well. Especially since it doesn't last as long down at as the 18 magazine. Ein hoch auf den Google Translator :-)
@nuggies68252 жыл бұрын
I just used my infinus 30 drum instead. I dont really need to mod it since the basr-l is already really good, but with 30 darts it's kinda unfair for people like me who enjoy slam-fire.
@marcixhubix17432 жыл бұрын
Michii
@kramster200322 жыл бұрын
I understand that this is a year old at the time of me typing my comment, and I'm new to nerf modding. I would like to know please with the spring. I don't have the spare parts and would like to know what kind of spring to get to increase range. Thanks.
@theSgamer692 ай бұрын
Can you pls tell me gow to get rid of the air restrictor? 🙏
@simontromans27483 жыл бұрын
Or any existing worker upgrades?
@WardNightstone4 жыл бұрын
think i'd chop off most of the barrel myself (i'd leave just a bit so it stays orange-tipped) but a parrel that long tends to cause drag on the ammo
@driftrc80612 жыл бұрын
Hey I know I'm a year late but do you think I could put a nexus pro spring in there
@Cringemoment40454 жыл бұрын
You also can fix the mag problem by using a different magwell thingy
@joshuagoodwin90182 жыл бұрын
when i put it back together it wouldn’t prime. would you know why. it moves back when it’s not put together but as soon as i put it together it seizes up
@runkurgan4 жыл бұрын
This makes me want to revisit my Longstrikes.
@AmericanFoam4 жыл бұрын
runkurgan I know they make direct plunger kits for the long strike that’ll help out too. They’re such a cool looking blaster only to perform like junk.
@shrayesraman51923 жыл бұрын
Just upgraded my longstrike with a kit from etsy. Took a while to ship but makes her perform like a champ! Full metal internals the works.
@zahidroadwall82552 жыл бұрын
Hi, What type of Screw driver did you use to open it up? Please reply as soon as possible.
@darkdest6664 Жыл бұрын
the X head. small
@alactro88253 жыл бұрын
Where do I get the spring from
@whatisthisbro3 жыл бұрын
How do I remove the orange tabs to reload?
@mega_logiicc28263 жыл бұрын
How can you take the bolt action lever out
@neolancer0053 жыл бұрын
You think a half dart mag adapter will work with the BASR? Also would a reliator expanded plunger would work?
@RizzCaar7 ай бұрын
No I am sitting at my table trying to figure out how to remove the stock to get the front cover off of the gun
@Jesus_believer7774 ай бұрын
My gun won’t shoot after I carved the inside of the tube. Is that why it’s not shooting?
@NovieFox Жыл бұрын
How did you got the Back off
@ciaranscl3 жыл бұрын
How do I fix my rifle after pulling the bolt back before putting the mag in,firing it won’t work,
@TrevorBelmont-yb3fn2 жыл бұрын
Is a alpha trooper spring the same size as the retaliator spring? Maybe a 5 kg alpha trooper spring would work?
@Jayv186 Жыл бұрын
Yes
@raq55582 жыл бұрын
omg how did you get the air resis... out ? plz help
@FukiFugi2 жыл бұрын
Great vid thanks! your voice volume is way lower than the intro music :P
@endie49045 ай бұрын
How do you remove the stock?
@gangstashots32983 жыл бұрын
So what is the air restrictor? I really look forward to moddng my blaster(s) but I would love to know what an Air Restrictor is and what does it do when you mod it like you did? Edit: The air restrictor is within the plunger and it restricts air from damaging the plunger when the spring is fired
@adamsmith84813 жыл бұрын
21
@heavy_gaming4222 жыл бұрын
@@GoofyAhhMods 910
@kPhotoniumEDITZ2 жыл бұрын
I took out every screw that i had in mine, and it’s still stuck together? what do i do?
@Sarkhamy3 жыл бұрын
How would you go about w barrel replacement for this blaster? I hate the expanding barrel
@Hanzox_2 жыл бұрын
If you take out the barrel there’s a smaller tube inside, pull out the smaller tube. Then chop off the base of the thicker barrel and use the base as an anchor for the thinner barrel
@bolo99gaming2 ай бұрын
hi i tried to upgrade this gun but when i tried to disasemmbly i did something wrong and it doesnt working now a fell out its 2.3 cm long
@simontromans27483 жыл бұрын
Hi Brett, would an existing stefan kit for longstrike or retaliator fit the basr blaster?
@AmericanFoam3 жыл бұрын
Unlikely. I’m not exactly sure, but the internals are typically different from blaster to blaster. Not saying no, but you may end up needing to do more shell work than it may be worth. The Nerf subreddit is a good source of info if you haven’t checked there yet too.
@simontromans27483 жыл бұрын
@@AmericanFoam thanks for your reply Brett. I'll look into that.
@Gerbear.2 жыл бұрын
Where can I get the updated spring
@frog45513 жыл бұрын
How did you remove the charging handle can you make a video on it I’m trying to replace the spring with a airsoft 600 FPS spring
@tomm-ip9vj2 жыл бұрын
The rifle would probably explode from such s spring
@GENEX4006511 ай бұрын
By any chance is there a way you can remove the stock when it's already clipped in?
@AmericanFoam11 ай бұрын
You can unscrew the blaster and take it off once it’s all apart. It’s annoying but doable.
@SpongeVibeYT2 жыл бұрын
I used the mag and put it together regularly but then when I shot it it got stuck in the suppressor. my mom yelled at me, How do i fix it?
@Beansvr6193 жыл бұрын
I’m trying to get my gun on jammed and it’s not working with anything and I cannot take it apart
@jovonpatrick1079 Жыл бұрын
Thanks bro
@ro-builds18812 жыл бұрын
I think I'll keep the air restrictor, cuz for me sacrificing that few FPS for,a longer use life is a good trade off. (PS:) So i changed the original spring to a 8 kg retaliator spring, but i didn't change the catch spring, will there be alot of issues?
@allanaponte7873 жыл бұрын
well. i found this video AFTER assembling the thing but im a stubborn man. took me an hour and disassembling every single part, but i got the clips and the stock out. not sure how to reassemble it really but i’m working on it and i can at least try this along the way
@AngelDiaz_3 жыл бұрын
How did you get the stocknout
@Dirtydorrito3652 жыл бұрын
How do I stop the gun from jamming!?
@johnathonbaker10842 жыл бұрын
How do you get it apart after all the screws are out because mine won’t come apart
@darkdest6664 Жыл бұрын
ik great video that dosnt explain ANYTHING
@kingwelch9082 жыл бұрын
I got a toe nail clipper stuck in the gun and I couldn’t get in out in like a year Edit: don’t ask how and why u put a nail clipper in a nerf gun
@TheRecollector75943 жыл бұрын
Does it take a k26?
@andrewabshire86133 жыл бұрын
Hey I did the spring mod but I put the priming handle in before I tested it and it did not fire do you know how to help me
@goldcrow9133 жыл бұрын
Bro the same thing happened to me , my gun just didn’t have enough pressure to fire
@lulaenparis11 ай бұрын
I’m havign trouble with the side things
@PeterSalinas1120112 жыл бұрын
I need spares, the Priming bolt for the NERF BASR-L FORTNITE, help.
@dr_awesome_10103 жыл бұрын
You can open the whole blaster up to make it accept 18 round mags... Or... You can just sand off the little orange bump on the mag.
@dr_awesome_10103 жыл бұрын
@Louie St it's filing off one small bump, it doesn't really count as ruining a mag 😂
@dr_awesome_10103 жыл бұрын
@@neyopolitan2166 not with the right type of file. 😂
@rduplexdawn2 жыл бұрын
How would I take the priming handle/tabs out? I don’t really care if the tab breaks or not cause I’m modding the gun to an awp- paint and all, thus only having the handle on one side, but I’m worried I’m gonna break another part in the process. Thanks! Edit: Finally got it out after 2 days of messing with it. Found a way to wedge a screwdriver into the hole that it sits in and then wrenched it out.
@austinrobertson966 Жыл бұрын
How did you get the screwdriver in and where? I'm trying this and can't get it.
@rduplexdawn Жыл бұрын
@@austinrobertson966 What I did was push the screwdriver out from the side of the tab. After long time use, though, it seems to wear out the tab a lot. Mine's broken now :P
@austinrobertson966 Жыл бұрын
@@rduplexdawn thanks for the response. I ended up using the claw on a hammer to pull mine, but now stuck trying to separate the butt stock from the main gun. My life.
@seamusjack283 жыл бұрын
Can u make it shoot wafflehead darts
@xxogxx35382 жыл бұрын
Ok this is late but I need help how do u remove the things u use to prime it
@AmericanFoam2 жыл бұрын
With a flathead screwdriver. They’re not meant to come out so you’ll have to pry them out very gently and wiggle them until they loosen enough to be removed. Take your time.
@Yeetcringe69 Жыл бұрын
How did you pop off the stock like it was nothing?
@AmericanFoam Жыл бұрын
You have to mod the retention clips before putting it on in the first place. I don’t remember if I referenced that hint eh video since it’s so old but the only other way to get it off is to open the whole blaster.
@Kevin_Durant354 жыл бұрын
What spring (kilogram wise) would you recommend for this blaster
@AmericanFoam4 жыл бұрын
I used a 5kg that I thrifted and that got me about 90fps on average. Anymore and you’ll also need to upgrade the catch spring too. My 7.5kg spring wouldn’t catch but I didn’t have a suitable catch spring either so I just went with the 5kg for the time being. You’ll also need to pad the plunger head with some sort of thin foam to prevent cracking.
@Kevin_Durant354 жыл бұрын
@@AmericanFoam if I used the 5 kg spring would it crack
@AmericanFoam4 жыл бұрын
It’s possible. Especially as time goes on. If you pull out the plunger rod, and hot glue a circular piece foam on the front end that hits the inside of the plunger tube than that should keep it safe. Only need a bit of foam and some hot glue. Would be pretty easy to get done.
@Kevin_Durant354 жыл бұрын
@@AmericanFoam thanks for responding. It really helped me 👍
@pattipopp09642 жыл бұрын
What is the most powerful spring i could put in this gun?
@AmericanFoam2 жыл бұрын
Not sure. Bolt prime nerf blasters can’t take too much of an upgrade. Maybe 7.5kg? You would definitely need to pad the plunger head.
@AngelDiaz_3 жыл бұрын
How did you take the stock off
@iamdrake38073 жыл бұрын
Ya
@spexzvlogz8693 жыл бұрын
bro how tf do you take it apart
@isaiahrodriguez17722 жыл бұрын
I don’t know how to get the stock off
@babicuddlewuddles30973 жыл бұрын
8:00 doesn’t the top one look like a space pistol
@pootingsaucessc74232 жыл бұрын
Quite literally a modulus longstrike mod. Also a random cool fact about the modulus longstrike, you can use a retaliator half dart kit in it. It's amazing. And a retaliator metal plunger tube and catch. I wouldn't be surprised if you didn't think what I'm saying is possible but trust me , it is. Then again I'm the kind of guy who takes his aeon pro and turns it into a stampede so... (._.)
@captainghost-14722 жыл бұрын
Did you actually make an aeonpede?
@shinobu94144 жыл бұрын
nice this video was helpfull
@shinobu94144 жыл бұрын
thx
@baconflakes33456 ай бұрын
I actually put two jolts at the bottom as an m203 and a magnified shit scope and a canted non magnified shit red dot, along with a ghili wrap, i have now evolved to making the m110 hit, like an m110
@JoltKing6274 жыл бұрын
Dude, you either need to remove the boltsled lock or get a plunger pad. Even 5k is enough to shatter the plunger rod if you have no ar and no pad. (Even with little to no dryfiring)
@AmericanFoam4 жыл бұрын
Hot gluing a bit of mega dart foam to the plunger head is a good trick. I’ll probably go that route then.
@JoltKing6274 жыл бұрын
I haven’t personally tried that, but heres hoping it works for you!
@AmericanFoam4 жыл бұрын
It works well. I’ve done it before on an alpha trooper with a 7.5kg upgrade and AR removal and never had an issue.
@Carcharodon4 жыл бұрын
Hey, I'm new to modding and if i leave the ARs in, will it still shatter?
@Carcharodon4 жыл бұрын
Fixed Magwell, Fixed Stock, And Pump Kit will make it my Primary. Sadly, I'm not allowed to order online or go outside my home. I hope the SR and BASR-L will arrive in the Philippines
@ivertrionnicblazingwell17573 жыл бұрын
Hello fellow filipino, musta
@babicuddlewuddles30973 жыл бұрын
Can’t you just sand off the bump on the magazines?
@AmericanFoam3 жыл бұрын
You can, but I find it easier to fix the blaster than grind down all your mags.
@Sagebruv2 жыл бұрын
People just take a hammer and use the side that pulls out nails to take out the priming handles.
@communistcomrade9698 Жыл бұрын
Bro ur tip works i applied mine it really worked
@kittokittokoshiki89783 жыл бұрын
just got it yesterday dont underesimate its weights and size its like 4feet amost and atleast2lbs
@FrConor2 жыл бұрын
How do I take the stock off? I’ve been trying for 6 hours and can’t do it.
@Goofy-goober722 жыл бұрын
Once it’s on you can’t take it off unless you take the whole blaster apart but if you have put on the bolt handles umm your out of luck
@FrConor2 жыл бұрын
@@Goofy-goober72 I already took it off and forgot to delete the comment
@Goofy-goober722 жыл бұрын
Oh ok just helping
@conordollarton15552 жыл бұрын
@@Goofy-goober72 so after you put the priming handles on you can’t take them off?
@Goofy-goober722 жыл бұрын
Yeah I think so
@damiangomez9793 жыл бұрын
How did you take out the bolts
@AmericanFoam3 жыл бұрын
Prying with a screw driver. Very carefully.
@damiangomez9793 жыл бұрын
American Foam o ok I’ve tried that already but it still won’t work
@Oogz72 жыл бұрын
ALL MYT LIFE I DIDJNT KNOW THIS!!
@user-zr8rt2yc8u3 жыл бұрын
For the stock can I just pull it out without breaking it
@AmericanFoam3 жыл бұрын
With out modding it you won’t be able to pull it out.
@WonderfulMaker3 жыл бұрын
@@AmericanFoam no mod here yet, but managed to remove the stock 🤷🏻♂️ my only issue now is removing the orange taps (handles) to fully dissemble this blaster 🤦🏻♂️ my kiddo wants me to fix it ASAP 😔 any ideas how to remove them without breaking them?
@AmericanFoam3 жыл бұрын
That’s the hard part. There’s no easy way to do it, but basically you will need to wiggle a thin flat screwdriver in next the orange tabs where they click into place and wiggle them loose. I had to use a bit of force on mine but they didn’t break when they came out. They may strain a bit but your mileage may vary.
@reocker8 ай бұрын
TwT me trying to remove the back with my hand and u with 5 seg or more did it
@JonasMush4 жыл бұрын
Hello, does somebody know which spring is prefered for this mod? Because if I have this blaster, I would like to have it at an average FPS of 90 maybe? (If it's possible?) If somebody knows pls tell me.
@AmericanFoam4 жыл бұрын
Go to FoamBlastShop and order the Worker Retaliator 7kg spring upgrade kit. That should work fine.
@JonasMush4 жыл бұрын
@@AmericanFoam Ok, but there is 1 problem though... I'm from belgium and I suspect it will cost a lot to deliver it here. Is there like a general spring that you could find anywhere? Thx for replying!
@Hoeni20004 жыл бұрын
You can order the 7kg worker spring from blaster time in netherlands, Krijn is a pretty nice guy. Greetings from German y;) Im opening mine up as we speak - tomorrow i can verify if the worker 7kg fits or not.
@JonasMush4 жыл бұрын
@@Hoeni2000 Thx for the help! I will be looking forward tomorrow to hear if it fits! It's nice to see that the nerf community has so many nice people!
@Hoeni20004 жыл бұрын
I can confirm that the 7kg Worker Retaliator spring fits in the BASR, no catch upgrade needed. Without AR removal mine went from 65-60fps average with Elite darts and 50s with worn accufakes to 85fps average with Elite and 80fps average with fresh Accufakes. I suppose if you remove the AR you get the 90fps you were looking for. Will post our nerf clubs mod video this saturday (it will be in german though). Magwell mod: I needed to remove a bit more material from the shell next to the magwell to make 18 round stick mags really click in place. Also the worker clear 10round long dart magazine looks as if it was made for this blaster. :)
@rjpgr8474 Жыл бұрын
Hola necesito desarmar una... Me ayudan
@dr_awesome_10103 жыл бұрын
Without the stock and mag, that thing looks insanely stupid 😂
@Jesus_H_Christ3 жыл бұрын
10 months later but like the joker's pistol from 1989
@malachishardy933 жыл бұрын
Thx the the the the you
@Goofyahhgamer69Ай бұрын
I used an old broken rival gun’s spring and a dart busted through a water bottle with water in it. Don’t use rival springs to mod this gun
@justsomerandomlego64212 жыл бұрын
I just want to fix this
@FreshRides2 жыл бұрын
So tired of darts getting stuck in the barrel
@darkdest6664 Жыл бұрын
you didnt even show HOW TO TAKE THE STOCK OFF. mine WILL NOT COME OFF
@us2runknown5424 жыл бұрын
Hello.
@taylor-qh2ij11 ай бұрын
Smash
@benpickens99184 жыл бұрын
Can you show a mod to remove that obnoxiously huge “FORTNITE” logo on the side of every nerf fortnite blaster?
@FirelordRob764 жыл бұрын
you're so edgy and cool. making fun of fortnite lets us all know that.
@Cringemoment40454 жыл бұрын
Sandpaper
@santan_v_manman2472 жыл бұрын
@@FirelordRob76 ???, your comment makes no sense whatsoever. Never did he make fun of Fortnite. You are actually delusional💀.