Nescafe DOLCE GUSTO Circolo - Disassembly and repair Krups KP5001

[@thegees]

you have saved a machine with this vid, just needed new injector plate and o ring, around £9, they hadn't been changed in 13+ years

[@53tanyas]

Thanks Adrian. I also succeed to open, repair and clean inside with your video. Best wishes...

[@TheSoberBear]

Thanks, bud. I've retrieved my own after moving house(s). One of my cats aka the stupid one knocked mine off the worktop. The water switch knob has come off and I think the switch needs reseating.

[@giannispellas2427]

thank you so much for the guide... worked great with my kp510 just a bit different in the end where you have to put the lever in the middle and works just fine. just wanna let people know that if you want to check that everything works without the plastic be carefull becouse it gets really hot in the tank on the side. got a little burn on my finger. anyway it was still a good deal since it was a fix it and keep it situation. thank you adrian.

[@totalcarstore]

Esse video me ajudou aqui no Brasil!

[@DidierLehodey]

SUPER UTILE

[@michelecasino9058]

Thanks for this video, Adrian do you have one for repairing the power button on circolo? It's kaput nothing happening, no power at all. Many thanks

[@figueroafiorda]

Hi, I have the same coffee maker. Transistor Q5 on the board has blown. Would you have the characteristics of that transistor? Greetings from Tucumán, Argentina. thank you

[@ThalesRod]

I didnt get to remove the front panel like u did. Any tips? I put as much force as i could almost broke the thing apart.

[@yt_premiumdick5241]

I had the same problem until I rewatched from 6:35 to 8:34. He "pulled" the side pieces a bit to the side. After I did that I was even easier than in his video to remove the front.

[@rafanagigancie236]

Kiedy będzie filmik o Daihatsu Ferozie

[@acrowik]

Do you have a video to repair the part where you put in the capsule ? My machine still heats and puncture the whole in the capsule , but the water runs aside the capsule holder instead of into the cup

[@benassy69]

Hello. Yes look on my channel for the video called "Dolce Gusto- Leaking diffuser / injection plate. "

[@terryterry1655]

wat caused no water flow?

[@saadcassim3818]

Ive got the same machine but the capsule is stuck in the machine and the capsule tray wont come out and the lever is stuck in the locked position

[@benassy69]

I have a video on this problem on my channel. Just run hot water thru the main haine and the capsule will go free and the try can be removed

[@doublestone1]

First of all: Thank you for this video. I own such a machine myself, which was leaking water profusely. Easily done by changing the seal where the water tank is plugged in. I hope you dont mind if I make some critical remarks: In between it seems you do not really know, what you are doing. Your hands tremble, you're breathing hard, how you handle the screw driver to open the sides of the machine will - I do no doubt - leave visable marks on the plastic casing ... And of course, the maintenance of this machine is NOT done with making the lever move again.

[@benassy69]

Hello and thanks for the comment. Glad you managed to repair your machine. Regarding the critics of cours I don't mind when they are constructive. This is one of my earliest video and clearly I made mistakes. But some of the stuf I cannot change like my breathing since I have a deviated septum. Some of the units I use, are for spare parts, that's why I don't care about the finish of the plastic which as you might see are scratched from the begining. Now maybe I am wrong but the main ideea is for people who are watching my video to get an input on how to do it. I am not doing restoration videos. But thanks again for the constructive critics, that shows you care and I apreciate. Take care mate!

[@kestranor]

@@benassy69 Just commenting to mention how much I appreciate your videos. To be fair, some of these coffee machines are quite hard to take apart, even when you know what you're doing. All those plastic clips are a pain to handle, especially if you care about not breaking them. But that is entirely up to the viewer / owner. To me, what is important is that you're SHOWING the process, which helps tremendously when taking these things apart for the first time and to avoid mistakes myself. Like with many things, it's easier once you know the process. With your videos I already managed to take apart two Nespresso machines with minimal to no damage, then I proceeded to fix and repurpose them (one had a faulty flow sensor, the other had a blown thyristor). Both are still in use today. So not only did I learn a lot, I also managed to save two machines from the landfill, giving them some more life. My family has many such machines too, so if theirs break down, I'm confident I can service them, saving even more money and machines in the process. So all in all, please keep doing what you do, as I'm sure there are many like me who appreciate the effort. PS: The reason I'm commenting on this video is that I'll likely service such a Dolce Gusto machine quite soon. Now I know exactly where to start.

[@benassy69]

Thank you. This types of comments keep me going.

[@rudolfsimorangkir8675]

Saya punya kurps type510 rusak tidak mengalir airnya dimana saya bisa service.tks

[@Taylor-DaneSnyman]

My machine is leaking water from the water tank and even more when I put it in the machine, what do I do?

[@benassy69]

Hi. You need to change the 2 orings . One on the machine in hove and one in the water tank.

[@Taylor-DaneSnyman]

Is there a video on how to replace them? I have the Circolo Machine@@benassy69

[@benassy69]

I have videos on my channel for both but not on the circolo model. But maybe it will inspire you.

[@miri_potter]

Mine doesn’t turn on 😢

[@sebastiaohelio9836]

It's só easy!!!!😂😂😂😂

[@rudolfsimorangkir8675]

Dimana tempat service atau yang dapat di telp.tks