Nest Thermostat issues

www.sealheating... ‎ Are you having Nest thermostat issues in the Fort Worth area? As a technician, many people ask me "How do I fix my Nest thermostat?" Some folks are just so fed up with the thermostat that they have me replace it with a basic Tstat. Fact is that this is the wave of the future and all thermostats will be Wifi capable. Therefore, it's best to learn as much as we can about the Nest thermostat, or other Hi tech thermostat, you have to make life easier. First thing is first ... was it installed correctly? Majority of issues are due to a poor installation by home owner or technician. Customers have experienced power issues or a low voltage short causing the thermostat to perform poorly. I would suggest to call the company that installed back out so they can fix it for free. Calling another company will result in a service fee and diagnostic fee.
Second, make sure that you have had your air conditioning system served and a maintenance. If you live in Fort Worth / Keller TX area, we can service your unit. www.sealheating.... Even a filthy filter can have a severe affect on your AC system and cause many problems
Third; Go through your settings and make sure everything is what you want it to be. Remember, the Nest thermostat is a self learning piece of technology and will reprogram itself if you allow it. Kind of sounds weird and even big brother’ish but that’s the reality we live in. The most common issue I have is that customers complain that the Nest switched to a temperature they didn’t want it on… Please first ask your kids or mother in law that’s staying for the week if they tampered with the temps. I go into the settings then choose Nest Sense. Here I move Auto away to the off position. This allows the home owner full control of the Nest and has solved a lot of issues. Please comment or ask any questions. Thank you
www.sealheating...

[@ericjamesphotography]

Thanks a lot man! I’ve been so frustrated that it keeps changing and I think that’s the solution

[@timothyisaac4407]

Moved into a home with nest. Temp shows it’s 75 on the nest but cooling for hours doesn’t drop the temperature. Is this an error on me operating or a glitch?

[@aerator12]

I have just installed a nest 2nd generation and it wont turn the heat on. It starts a 3 minute count down screen turns orange then starts the 3 mincount down. Followed instructions, set it up but no heat. Also had to charge it up via usb because it didnt have enough juice at first. Thanks in advance for your help.

[@Sealheatingandairconditioning]

James Jones I’d have to see how you wired and programmed it. Gen 2 has issues and I recommend a Gen 3

[@guerreroruben1973]

After installing nest the ac central air seems to run a lot longer than with a regular digital thermostat . Any recomendations

[@alansalit3960]

I had an issue just like this. The first time I set a schedule, it was to raise the A/C to 76 at 10pm, then to 74 10am the next morning. Woke up at 5am because my 2 year old was screaming, and it was because the house was FREEZING. I went to the Nest, and the A/C was on set to 64. I did what you showed in your video to change to off. Could that have been the issue? That was the first and only time it happened, and it was the first time I had set a schedule; which I did check twice to make sure it was correct.

[@oldbootholdings5630]

My gen 3 Nest is overheating. Set at 23 degrees and when I came home yesterday it was 32 degrees. I shut it off and restarted it, tonight set at 23 and it is 29 degrees. I've had it for 1.5 years and this is the first time it has ever messed up.

[@Sealheatingandairconditioning]

Susan Parlee Call a technician or Nest support

[@tomdurrance2427]

Thank you... I have a 3rd gen and when using the heat, it always shuts off before reaching desired temp. Then later in comes on for a little bit. I do have it wired with 5 wires. Any suggestions?

[@donnaayers7759]

My daughter has this nest but for some reason we can’t get the AC to work it was working and she turned it off for a trip and when we came back we can’t get it to come back on have you had this happen before

[@ericacarpio7936]

We moved into a house with a nest and for the life of me I cant figure it out! Does the fan have to be on in order for the house to be cooled? As soon as the fan switches off the temperature rises. Ive had the fan running non stop for 2 days and Im wondering if that will crank up my electric bill.

[@Sealheatingandairconditioning]

Erica Miller keep fan on “Auto”.. running the fan will raise humidity

[@craigjakobiak6740]

My a/c runs, cools to desired temp turns on and within 2 or 3 seconds turns back on. I know this cannot be good on the compressor. Why is it doing that?

[@RobWilson13]

Thanks for your video. I have a Nest E thermostat that stops heating when we agree in the room. I have turned off Home/away assist and auto scheduling features. I have also reset the schedule 2x now. It is still turning down the heat. Their customer service was horrible. Any thoughts or suggestions would be appreciated. Thanks from the great white north!

[@Sealheatingandairconditioning]

Try taking off the schedule. Make sure Eco setting is off as well. If it continues, return for a new one. I haven't had many issues with the Nest E so its a decent product

[@jayzhao1817]

Mine already has blue common connected and all showing OK, but it got me to dig into it deeper again, and it turned out under pro settings the use of fan was not activated.. I activated it and now my nest has no delay at all.

[@allisonpouncey4770]

My nest is registering the room at 68 when it is actually 73. Anyway to re calibrate (or manually change). I have rebooted, didn't help. Will this work itself out? My AC guy says nothing wrong with unit, thermostate is just incorrect. Suggestions?

[@Sealheatingandairconditioning]

Could be a couple things. The location of Nest may read its relative area and not what is the house. Second, If there is cold air coming through the wall its mounted on, that may affect the reading. Otherwise, you may need to call Nest directly and they will give you a new unit if needed. Is this a Gen2 or Gen3?

[@aaronwood9032]

Pull the Nest controller off and look through the hole in the middle where the wires come out. If there is a large hole in the drywall where the wires are coming out, seal it with some foam in a can or some other creative way.

[@LQQKyLQQ]

Mine is doing this also. It was working for a few months. It is not a cold air or draft problem like the other 2 replies. Did you find a solution?

[@cristianschmaller]

My thermostat sensor it's showing a higher temperature than normal. I tried a lot of things and no results to make it to show accurate room temperature. What would you suggest?

[@ItsThiTime]

Just installed a nest 3rd generation in my upstairs and one downstairs. Upstairs one works but downstairs not cooling down. Why? They are wired the same and have the same settings programmed. Please help! It’s hot in Texas!

[@Sealheatingandairconditioning]

This could be a number of things. It may not be the Nest so I would call a service company in your case

[@RudydeGroot]

Wow... 68° or 72° are indeed ridiculous temperatures... I'd have mine set to a normal 21° Celsius.

[@twistersolutions8931]

I have a problem. I'll have the Nest set to 68-70 or so and the AC will turn on for a minute, stop, wait like 5 minutes, turn on again and stop. House is always at 78-85 degrees even though we always have the Nest set at 68-72. Sometimes you can hear the fan running, but not very much and the air coming out isn't cold. I've gone through the settings in my Nest app I dont know how many times and tried out different things. Turned Eco mode off, deleted the schedule, turned on certain things I normally have Off and vice versa, etc. No change. This thing just has a mind of its own. Does whatever the hell it feels like doing. I just had the entire AC system replaced in January, and I've already called them back out twice to look at it. So I don't think there's anything wrong with the system itself. Thank you.

[@Sealheatingandairconditioning]

How old is the Nest? Also, is your system a Heat Pump? What did the AC company say when they came out?

[@twistersolutions8931]

@@Sealheatingandairconditioning Just a couple years old. I installed it myself when we got solar. Yes it's a gas forced air system (so i think it's a heat pump): 5Ton 14SEER Goodman heating and air conditioning unit And the first time they came out the guy said there was a loose wire at the unit, so he tightened the screw. Second time they came out, they said they didn't really find anything wrong but it was working fine at the moment, so they left. Next day it started acting up again.

[@Sealheatingandairconditioning]

@@twistersolutions8931 Not a heat pump. Call out a different company. Usually a second set of eyes will see something the other guys missed. If its a Nest Gen 2 (like one in this video, get the Gen 3. Also, try to reset your unit. Flip breaker that says "Furnace" or "Heater" for 10 seconds then turn back on. Sometimes circuit boards need a reset. Hard to tell without putting my hands on it

[@twistersolutions8931]

@@Sealheatingandairconditioning Well calling out a different company would cost me money, where as the same company is still guaranteeing their work. Its a nest 3rd gen.

[@53Oldude]

We went out of town, I set Nest to eco mode. House got down to 54 degrees. On our way home I set it to Home and heat, I checked progress of the heater as we traveled home. House was still cold. The Nest was still calling for heat but temp was not going up. Checked many times on the way home... 215 mile trip home. Got home nest still calling for heat. Down in the basement furnace is running but no flame. shut off workman switch and cycled furnace got flame, It went out, cycled again got heat, it went out, cycled 3rd time got flame and heat and has worked fine eversense??? I am not sure how to determine if my Nest is Gen 1 or Gen 2

[@Sealheatingandairconditioning]

John Biggs Gen 3 has a large display. If you have Gen 2 get rid of it and get the 3. Also, if your heater does that, check for error code on the circuit board. I get a lot of calls from customers with issues after they go on vacation. Usually overheats

[@stephanieswingle1500]

My learning nest will not activate the electric Ac unit. Whether its on heat or cool mode, both activate my gas furnace... I took out the ground as nest support thought maybe was getting too much power, did not fix issue. It is wired same as my old thermostat which activated both units when needed. Have you seen this before? Any suggestions? Thanks!

[@Sealheatingandairconditioning]

Stephanie Thompson sounds like its a circuit board or wired wrong

[@ericsmith8961]

I have a question when I turn on my unit it starts fan inside the unit is working but no blower fan or no air coming through the vents. I called best support and he told me to swap my green wire with my y1 wire. When I did this I started getting air through my blower but now the outside fan on the unit isn’t working. Any help would be appreciated

[@twill5361]

We had a cold cold night last night. Our Nest 3Gen was set to 68 degrees heat. The temp stayed at 61 over night, my son told me he was freezing. I would hear the furnace turn on but I felt no heat like it would just blow air. It did that like 3 times over night. Then this morning at 9am the heat decided to turn on and actually made the house warm up to the temp I have it set on! What is up with that?

[@Sealheatingandairconditioning]

T Will could be a sensor or switch. May not be the Nest

[@mrsninam]

Sounds like it was using eco temp mode.

[@Teegogetta]

Thanks for the reply the weirdest thing happened when I connected the thermostat the way the book set it up my blower motor came on with my fan settings off but when I disconnect rc and put it to c it works fine but the book says I don’t need to wire terminal c

[@Sealheatingandairconditioning]

Nice! glad it worked out for you

[@SteffiSpranklesNBelle]

My ac keeps shutting down. I’ll have it set to 71 and all sudden I feel hot , check it and it’s off and 5-7 degrees warmer inside than I have it set. It won’t go back on unless I force it by turning the Nest off then dipping the temp 20 degrees lower. I’ve turned all the Nest learning crap off. What is it doing!?

[@Jetsi79]

Steffi B Did you find out why it did this? Is it fixed?

[@sirgreysack]

I have an issue with my nest e temperature gage, it says it’s 75 but it really is 72 how do I adjust this to the correct temperature?

[@SacksRl]

I have a gen 3 nest the furnace will come on and shut right off. Nest keeps show a wire error code for the rh wire which is the power wire. I have had 2 different technicians check it and called support 3 times. Not sure what to do to fix this?

[@Sealheatingandairconditioning]

jon harrah maybe replace it. They’ll give you new one

[@urbanandconniemalagarie1623]

Our NEST unit has a couple of issues I can"t figure out. While cooling, sometimes it goes from high speed fan to low speed fan, then abruptly kicks into high speed again. Also, I set the night temp to 70 at 7pm. It takes a long time to reach it. When setting a temp, is it supposed to be that 70 degrees by 7 or does it begin cooling at 7pm?

[@Sealheatingandairconditioning]

Is it the 2nd Nest? or the newer one? Also, when your AC is about satisfied, the fan speed may change. Did it start doing this or did it always do this?

[@shadow03clb]

Question for you. I just got a nest learning thermostat yesterday. I have the nest app and I have the Google home assistant hooked up to it. It has worked perfectly fine all day, where if I want to turn it down 1 degree, it immediately switches on. All of a sudden tonight, the room temperature was 76 and I wanted it down to 75. It took over 10 minutes for the system to click on. When I contacted support, they said that it's normal to take a couple of minutes. Why would it work perfectly fine all day when I would adjust it by 1 degree and all of a sudden it is taking 10 minutes for the same function?

[@Sealheatingandairconditioning]

shadow03clb sounds normal. There may be a tolerance range where if its plus or minus a degree it will or won’t come on.

[@shadow03clb]

@@Sealheatingandairconditioning Does this mean it won't click on? I also find that the system is running a lot longer than it did with my old thermostat. My old thermostat would cause the system to may be run for about 7 to 9 minutes. The nest causes the system to at least run for 15 to 20 minutes, if not more. So I'm afraid I'm going to see in increase in my energy costs. I followed some of your instructions last night and I took off some options. However, I saw that I already had times in my schedule when I looked at the app. I don't want schedule times at this time so I deleted the times. Is this correct if I want to just be able to control it myself?

[@FlowCubano89]

Hey man. So my nest is giving me this issue in where I set a temp through the app or my Echo dot or Google home and it won't change the temp. Sometimes it will but it takes a few seconds to respond. Some others will do it right away. What do you recommend to fix this.

[@FlowCubano89]

@@BrySR thanks allot.

[@kimberlyadams4111]

My Nest thermometer does not heat. It reads 59 when I want the temp to heat to 68. Furnace comes on but air is not warm. Gas Ignitor was replaced. Nest was reset. Router was reset. No luck.

[@Sealheatingandairconditioning]

Kimberly Adams I have a video of sequence of operation of a furnace. Jumper the furnace and let me know what happens. Does ignitor come on? So I’d need more information

[@ZEKAYPRO]

I think it's a cool future it's just dumb when changing it and it's says in 2 Hour and it doesn't run the AC

[@courtneyrummery2755]

Ever since I installed my nest which was a couple days ago... when my outside unit turns off it is REALLY loud.

[@Rosario415]

My nest does not look up to my Internet and neither to my Wi-Fi I'm not sure that it is necessary. My main question is that when I said it at 69° at night, it keeps shutting off and I have to keep getting up to reset it again. Can you help?

[@Sealheatingandairconditioning]

Rosario Ortega try removing any schedule and the auto away. If that doesn’t work call Nest tech support

[@genework11]

I have a nest E installed and once in awhile while it's cooling (set to only cooling mode) the heat kicks on? I adjust cooler and the air comes back on but don't know why this happens.

[@Sealheatingandairconditioning]

Gene Work Hi Gene, sounds like some weird stuff going on with equipment. Possible your heat strips are stuck (which I have seen before) You may need to call out a service technician Also make sure wiring is correct. should be an easy fix

[@adriannurse1502]

Every couple of months my Nest turns off and says wiring has changed. I am not changing anything. Any ideas what this is?

[@Sealheatingandairconditioning]

Is it Gen 2? Remove the face, Check the connections to see if they are pushed all the way in. Sometimes they can come loose. If it happens again, call NEST. Issuse may be the sub-base

[@dmerz12]

If you are not using the auto features of Nest are there other benefits that make it worth the price?

[@Sealheatingandairconditioning]

Absolutely. The wifi is great and records your energy usage. Auto features are fine for some people but many of my Nest customers here in Texas want more control of the thermostat temperature settings. Especially during those days with high humidity

[@janisbolin9384]

I can’t get my nest thermostat E to connect with my WiFi, or add it to my nest app. It keeps asking me for the entry key. I have no idea what that is. I never saw it in the screen.

[@Sealheatingandairconditioning]

To do this, you need to access the set up from your thermostat. check out this guys video kzbin.info/www/bejne/npOuaXqorMmcjMk

[@shiquitaingram1585]

My AC is running but no air is coming through my vents. The thermostat shows that its cooling. Is there a fix for that???

[@Sealheatingandairconditioning]

Sounds like an AC issue and not a Nest issue. Call a service company out

[@onesipwonder]

I have nest 3rd gen with electric heat pump. The heat doesn’t work, it just continues to heat while day....

[@sylviamata1314]

I have a problem with when it reaches desired temperature it makes A horrible kicking sound on the unit as it is trying to turn off

[@Sealheatingandairconditioning]

Thats your compressor. Nothing really to do with your thermostat. You may wanna call a service company to look at it. Maybe watch it just before it turns off and let me know what you find or hear

[@joseayala1454]

My nest thermostat is not communicating with the furnace

[@Dyntithius]

Thank You!

[@margaretholt6080]

i have a nest under a year old temp set at 70 but its says its 78 tech four times have been out in 25 days still not right

[@ranger482v1]

Why would my nest gen3 tell me to remove from base and reattach. This is replacing a t87 thermostat heat only. I have changed wire configurations several times. Added a 2nd transformer.

[@Sealheatingandairconditioning]

Call Nest support or a technician out. Because parts have been changed, I would have to see and test the system

[@icur]

You are only suppose to have one source of power if your using a C-wire adapter, see this video kzbin.info/www/bejne/nZLLgat5mLV3qtE I would get some steel wool and clean the wire ends also. I think what they meant to tell you when they said to remove the base was to remove the thermostat and re-seat-it to make sure all the pins were contacting correctly.

[@m.r.s.aquarium1429]

Hi im having an issue with my nest gen3 doing a forced delay in the middle of a cycle. Its is set to 73 and the room temp is 77 and it delays for 5 min making it hot. Any thoughts--thanks

[@Sealheatingandairconditioning]

That sounds like there is an issue with your AC unit. If the Nest is doing that, you can change the compressor delay time in the settings. Does your AC work fine?

[@m.r.s.aquarium1429]

Seal Heating and Air Yes my ac worked fine with my old digital thermostat - - how do i change the compressor delay in the settings--do you know?

[@Sealheatingandairconditioning]

kzbin.info/www/bejne/r2XOZ619e8mHj6c... I would take off the energy saving settings as well to test your unit. Then put them back if you like. The link I sent helps get you to the area but doesn't say exactly how

[@m.r.s.aquarium1429]

Seal Heating and Air Will try--thanks

[@6093247370]

My nest thormostate asking me what kind of air flow of your heater , my heater is gas heater may be 1988 or 2006 , there is 3 option shoving , I used 1st option , let me know what is the best option for me

[@Sealheatingandairconditioning]

mohd amir you should used Forced Air option

[@Bajaheat]

1988 or 2006? Dude that’s nearly 20 years difference lol

[@brianf5754]

My nest, in cool mode, sometimes makes the fan bang like a drum over and over instead of cooking the house. Sometimes it doesn't.

[@tahoe6182]

The temperature is set to 75 but ever now and then the set it too 73 but it doesn’t get to that temperature it keeps running why? And seems like it doesn’t shut down

[@Sealheatingandairconditioning]

Call out a technician

[@Teegogetta]

I only see home icon does it need WiFi to get the full function

[@Sealheatingandairconditioning]

You can use a lot of the features without WiFi...when connected, you can operate the Nest remotely and it tells you the weather and humidity outside (and much more). IMO, Nest is best with WiFi

[@jackychang7]

Hi my next gen3 cannot search WiFi , I’m pretty sure WiFi is working ,so how can I do

[@Sealheatingandairconditioning]

You may need to call Nest directly.. It's hard to see if I'm not there but it usually recognizes instantly

[@mrjorge13]

I just got a 3gen nest I keep getting a e102 error. I spoke with nest support a week ago they ended up sending me a new wire connecting plate. I'm not sure why they replaced just that item? I switched it out got the same e102 error. Called them again and was told my system is not compatible because it's not 24v I checked and it is 24v. I wasn't totally convinced with the help I got with costumer service. I read.something about e102 overcurrent not sure what that means?? I'm connecting the w1 and RH wire for heat gas boiler hot water base board! Any help would be most appreciated!

[@Sealheatingandairconditioning]

What kind of HVAC system do you have? What is "heat gas boiler hot water base board?"

[@mrjorge13]

Seal Heating and Air it's base board hot water. So I decided to hook the nest up to a different zone and it works! I think I have a wiring issue possibly a spliced wire in my attic from that zone making a poor connection. I'll wait till spring to do some diagnosis. Right now the old thermostat works and the nest is running the other zone.

[@Sealheatingandairconditioning]

Good job! I see that issue as well where old wiring has been spliced

[@drwhite21]

Does nest work with heat pumps and gas I have two stage heating

[@Sealheatingandairconditioning]

Yes. You'll just need to program it for that

[@tomc786]

i set my nest to 25c but it only reaches 21 and wont get hotter, i have a furnace

[@wildorchids3657]

I call my nest sense " non-sense"

[@jamesoby7638]

My thermostat goes to Econo mode by its self at 80 degrees, can you help?

[@rafaelrueda9014]

James Oby i have the same problem...😏

[@kristinahawthorne1276]

I hate my nest! I live in IL and it's -2 today. This morning when I woke up (to icicles in my nose practically) my house was at 53 degrees and the nest said it was heating to 65 but the furnace never kicked on. Then at 6 a.m. it kicked on to get to the 6 a.m. temp of 70 degrees which then my furnace was working overtime. WHAT THE HECK!!! I want to rip this thing off the wall and hockey puck it into oblivion! And I'm a programmer so I'm no idiot, but gosh! This thing sucks! Please help... If you can...

[@Sealheatingandairconditioning]

Kristina Hawthorne Sorry to hear. sounds like its a lemon. go to Home Depot or Lowes and get a new thermostat. Nest will replace it if you mail it in

[@kristinahawthorne1276]

Thank you!

[@Conald_isAfalseProphet]

Is there a way to view past error codes?

[@Sealheatingandairconditioning]

What is the error code?

[@Conald_isAfalseProphet]

@@Sealheatingandairconditioning haven't seen one yet, about once a month it just shows the "equipment detected" screen and is missing the common wire that is there and connected both in the Tstat and the AHU. It has worked for a few years but over the last few months it seems to end up on the screen I mentioned.. I am thinking maybe the transformer is going bad but I don't see why it would be intermittent so I'm considering other possibilities. That's why I was wondering if I could view past error codes somehow?

[@Sealheatingandairconditioning]

@@Conald_isAfalseProphet Good question.. I wouldn't know but Nest has good tech support and I'd try there. I never tried checking past codes

[@Sealheatingandairconditioning]

@@Conald_isAfalseProphet also, when a transformer goes bad, it's gone. could be a loose connection, float switch or relay going out

[@Conald_isAfalseProphet]

@@Sealheatingandairconditioning fuse and float switch were my next guesses but I agree, the transformer and fuse wouldn't be intermittent. I'm guessing it's the float switch and then when it clears it comes back on a few hours later when it gets power back.

[@myketiger8754]

It has always do this. It is a gen 3.

[@aaronwood9032]

I have a Nest 3rd Gen and I’m getting an error code e102 on initial install. My wire looks like it is installed correctly... Would I be having problems because I have a gas furnace then later installed an AC unit? More importantly; How do I fix it!

[@Sealheatingandairconditioning]

Aaron Wood sounds like you may have blown a fuse. Turn off the power and check the fuse thats on the circuit board

[@aaronwood9032]

So... Where is this circuit board? On the furnace? The self test for the furnace is when I first got the error.

[@aaronwood9032]

Seal Heating and Air location of said circuit?

[@Sealheatingandairconditioning]

I have a video on how to do this... kzbin.info/www/bejne/qZvJY32Kp651mZo

[@Sealheatingandairconditioning]

The board is at the furnace. You will have to open the compartment by removing the panel.

[@brpang]

I didn't have this problem of nest setting temperature too low by itself two years ago. Now I have this problem. Google (nest is bought by google) programmer think the nest smart enough to figure out your life patterns and set the temperature accordingly, but this thermo is definitely not that smart. Or perhaps it became stupid recently, setting things to average temperature for everyone. Very annoying. Long way to go google!! You will lose customers that way before nest become smarter.

[@Pcdoom2000]

So why even get a nest? Just buy a reg thermostat. It will do the job. :( Is there any benefits to get one? I guess so you can uses the app to turn it up and down.

[@intuitive_tarot3880]

Still won't come on.

[@travisbender1558]

Mine keeps randomly clicking even when it doesn't reed to run? Anyone have this issue?

[@Sealheatingandairconditioning]

That's weird.. call tech support

[@deochhetri5871]

I installed nest thermostat and it give me error E102 code. Please help me

[@Sealheatingandairconditioning]

DEO CHHETRI this is a wiring error code.. The wrong wire (w1) is inserted into a connector. It is fully inserted and there is only one place w should go.

[@MemoCR74]

Finally i realized I am not the only one wondering why the Nest shuts down in summer or cold or turns hear to 78 on winter. Not worthy - it is not smart - rather stupid. Get a cheaper programmable one - the “smart set up” simply does not work

[@sebastiangraah7792]

Good,

[@anthony9869]

Word of advice waist of money I feel I waist more money with this device

[@Sealheatingandairconditioning]

There are other alternatives. I have a Honeywell Wifi and like it only for that.

[@tonypuccio154]

Yes I have a problem with my nest if that is anybody out there who can help me I have four wires from the old thermostat I would like to know if somebody can help with this problem I have a black wire app just give me a second I have a white and the blue and the red wire

[@Sealheatingandairconditioning]

We would need pictures of wires and pictures of wires in the air handler or furnace.

[@JesusRuiz-wn7yx]

My ac wont shut off its real cold

[@Sealheatingandairconditioning]

Jesus R turn off the breaker and call an AC company

[@evilmcfluffin6774]

That's what it's supposed to do 😂😂😂 it's called energy saving

[@Sealheatingandairconditioning]

True but a ton of users hated that feature so I made a video of how to turn it off. Plus a lot of people asked for a tutorial

[@cavitycreep]

POS