Networking 2 Fishfinders to 1 Transducer | Garmin 93sv UHD | Super Simple

A quick video on networking 2 Garmin 93sv UHD fishfinders to 1 GT-54 transducer using a Garmin RJ-45 network cable.

[@loganshine8111]

Great video I’m wanting to get a second garmin on my flats boat up by the trolling motor because that’s where I always fish and I usually fish dirty water that i can’t see depth or anything this is exactly the part I need

[@WannaFishAllDay]

Thanks!

[@billware6721]

Looks like this would solve my issue too. Just want to be able to move my unit back and forth from the in-cabin nav station and the Flybridge station.

[@kathyg4906]

I have same mount on the handle replacement with my UHD 93 and it wiggles quite a bit. I like your network system and battery power. I should look into that. I just have one graph plus livescope

[@WannaFishAllDay]

Thanks!!

[@outdoorsadrenaline]

So the 93sv UHD’s only have one network port per unit? Thanks for sharing!

[@WannaFishAllDay]

That is correct. The 106sv has two ports.

[@DJkoassilator]

For the second display, do you just set it to the 1 transducer installed to show share sonar?

[@WannaFishAllDay]

Yes, it just automatically picked it up once I networked the two.

[@3604x4]

So will both fishfinders also show the sonar using the same transducer or only the chart plotter?

[@WannaFishAllDay]

It will show both sonars. They have the same functionality.

[@seanyc17]

So can you do two screens and do panoptix as well?

[@WannaFishAllDay]

Yes you can but will need a network hub if you are gonna use two 93sv’s. I ended up switching one to a 106sv (has 2 network ports) so I was able to avoid using the network hub. I believe Garmin sells one called GMS 10.

[@samkimmel4643]

So, when you decide to put Panoptix on the front, you can no longer network them?

[@Grainraiser]

You can still network them but you have to add a hub to system.

[@_FisherFolk_]

What do I need to use if have livescope one one ??

[@WannaFishAllDay]

Not sure what model that is so hard to tell. I have the 34 so the setup may be different. Can you provide some details?

[@101dragonsthe]

I tried to do this with and echomap 7sv uhd with the uhd54 and tried to network to a 7 sv plus but didn't work, has anyone tried this

[@WannaFishAllDay]

Not sure if UHD and SV are compatible.

[@101dragonsthe]

@@WannaFishAllDay they both echomaps but one is plus and other is uhd

[@kue1master]

So on one unit I can see down, and the other unit side with just one transducer?

[@WannaFishAllDay]

Yes sir!

[@andrewcarwile8499]

Awesome video!!! I was asking this question today. I have the same unit! 94sv. I want to get a 74sv for back up charts

[@WannaFishAllDay]

@@andrewcarwile8499thanks!! Glad it was helpful!