Never Buy Batteries Again: How to Convert Your Batteries to USB Charging

In this video, we'll show you how to never buy batteries again by converting your existing batteries to USB charging. This is a simple and cost-effective way to make your batteries rechargeable, saving you money and reducing waste. With just a few simple tools and some basic knowledge, you can easily convert your old batteries to USB charging and make them compatible with your smartphone charger. This is especially useful for devices like mouse and TV remote batteries that tend to drain quickly and need frequent replacements. Follow along with our step-by-step guide and never worry about running out of batteries again!
Don't forget to subscribe to our channel and leave a comment to let us know how this battery conversion worked for you and what other topics you'd like to see us cover in future videos!
Music from freetousemusic...
Track: Feels Like by Eric Lund
• 🧭 Fun Adventure Beat N...

[@InnovaDIY]

Hey everyone, I just wanted to add a quick safety note regarding this video. In one of the clips, I cut open a battery, which can be dangerous if not done properly. Please be aware that attempting to cut open a battery yourself can result in injury or damage to your property. If you're an experienced DIYer and must handle batteries, always wear protective gloves and eyewear, and dispose of them safely. For those who are new to this, a safer option is to first open the end of the battery and empty its contents, then cut it open. Please remember to always exercise caution and follow proper safety protocols when handling batteries. Stay safe and enjoy the video! please follow the main video for schematic and all detail kzbin.info/www/bejne/rXPdgGWPhNmheLM

[@JesseHughson]

Lipo pouch batteries need room to expand and contract. Encasing then in epoxy creates an explosion hazard.

[@Bretaxy]

Nope, you need it in the video. Im reporting you.

[@ronintechguru5252]

yeah like this is a very bad idea. Buy rechargable and just do that instead of this janky diy which will cause the battery to explode.

[@machnesntsn_ind.]

bruh. experienced DIYer. the point of DIY is that anyone can do it. if its dangerous you need to say it in the video. what you're is harmful. stop.

[@Rodrigo-ks6oc]

You needed to say so.. on the video Reported, for dangerous content

[@sciguyisanerd]

Don’t do this, buy rechargeable AA batteries instead

[@InnovaDIY]

it is a good way for busy guys.

[@strooky1855]

@@InnovaDIY wouldnt "busy guys" save more time from just buying batteries?

[@TheDailyKnife009]

@@InnovaDIY busy people would just have a stockpile of batteries 😂

[@beepyshenanigans]

don’t make fun of innovas english

[@Gold_Yoshi]

@@InnovaDIY Busy guys who have very specific chips lying around.

[@yupthatsmefr]

Instructions unclear ; i am now in the hospital

[@InnovaDIY]

Please watch the full video in our channel.

[@KingDavinciAnimations]

@@InnovaDIY Blud thinks he doing this in the hospital 💀

[@someoneidkwho2936]

@@KingDavinciAnimations FRRRR 💀💀💀

[@cult_of_odin]

Hospital? I just got my penis stuck in the toaster.

[@pratikugalmugale9982]

​@@KingDavinciAnimations 💀💀💀

[@alden1132]

This could go wrong in so many ways, starting with cutting into the battery to begin with.

[@InnovaDIY]

Thanks for you opinion, please follow us

[@rayferguson4556]

Thats not an opinion, cutting a battery is dangerous and most people shouldn't be doing it.

[@alden1132]

@@InnovaDIY I do.

[@yeetboy88YT]

completely agree with you

[@yeetboy88YT]

@@InnovaDIYthis is dangerous on so many levels

[@kohakkanuva3224]

"gentlemen, I present to you, the firestarter 9000"

[@solived1239]

How much 😂

[@TheBypasser]

Loved the ICs heaving their heat dissipation pads soldered to thin wires, what could go wrong indeed? ;)

[@kohakkanuva3224]

@@solived1239 20k. $19999 for the engineering that went into it, $1 for the materials.

[@YSF_B28]

​@@kohakkanuva3224how'd u guess the price of the apple vision?

[@qwertykeyboard5901]

Ok DR Strange.

[@dannous]

Yeah this looks so quicker and cheaper than just buying rechargeable batteries.

[@cthuluchtului650]

You know that some people enjoy making things rather than buying new all the time?

[@MrEdes7]

@@cthuluchtului650 youre buying a ton of new stuff to make that battery

[@cthuluchtului650]

@@MrEdes7 um no. Most people have most if not all the things needed in the video at home already

[@ConSoot]

What if its a lithium battery? Homemade bomb? Cringiest edit of all times: ty for likes guys

[@InnovaDIY]

It can be

[@adaliawright6891]

Yikes... that's a good thing to keep in mind if I ever try this...

[@NdjfjfhfNdjfjfjfhf]

😂😂😂

[@ЮраПетруш]

​@@InnovaDIY ❤

[@davidd2661]

3,7 volts in a li-ion/poly accu. Most alkaline batteries are 1.5-1.6V So no, just use nickel accus.

[@peterofenback9263]

Confidential tip: Modern wireless mice require very little voltage. If you have AA cells that no longer work in other devices, they can still work in these mice for weeks or even months.

[@InnovaDIY]

Thanks

[@sterkriger2572]

They can’t

[@sorcererx1]

well i have an oldie that sucks more juice than ... i cannot let alkalines sitting there for more than a month

[@lukedavis436]

Clocks....i stick all low Batteries inside clocks to polish them off. Once they're at 0.00v they're done for and i can recycle them.

[@lukaskral1800]

True. Also one more tip. If even your mouse don't want to work with this battery, just take it out, smash it against a ground and it's good for few weeks, maybe a month. I has one battery which refused to die for over 5 months. Just had to smash it more and more often xD Also it's completely safe, alcalic batteries are safe even fully charged. I've been doing this for years and nothing bad ever happened

[@BennyAndTheJetsz]

Cutting that open gave me flashbacks of when I was 13 and lithium battery exploded and left a nice permanent acid burn on my chest. 😵‍💫

[@InnovaDIY]

take care

[@vedantkale]

​@@InnovaDIY They is not gonna open a battery even again and now you tell them to "Take Care"

[@pinospin9588]

that's more like base burn, which is more severe

[@Arthur00OO892]

​@@InnovaDIY based

[@illitero]

@@vedantkale would you is prefer they say "lol" instead?

[@nourahmad2822]

Instructions unclear, the laptop is charging now

[@garagegaming625]

Oops

[@ethan7664]

Super easy! All you need is: proper tools, adequate wiring skills, a soldering kit, very precise movements, extreme caution to avoid hazardous contact or interactions with an exposed battery, a detailed knowledge of electronics and circuitry, and then your all set!!!

[@Castlepa26]

Exactly what i was thinking. 😂

[@Jonathans_tech_thoughts]

Guys please don't get me wrong... But i think its a lot cheaper, easier and saver with just buying an rechargeable battery...

[@InnovaDIY]

it is a good way.

[@cult_of_odin]

Its not so much about the ability to just buy it. Its the experience of making it. I understand why dude would do it just to do it.

[@leviofanh]

Rechargeable batteries have a low voltage of up to 1.3 volts and may not be enough for some equipment. Here he built a full-fledged lithium polymer battery with a maximum voltage of up to 4 volts.

[@ProCoder119x]

Ppl who don't know about electronics commenting that. Man DIY is so good to do.

[@Hyjaxaru]

No thanks… I choose life thank you.

[@InnovaDIY]

take it easy.

[@Hyjaxaru]

@@InnovaDIY i'm sorry, batteries just scare me. had one make lovely smells in my room once

[@TheDailyKnife009]

Same

[@toperaheem]

😂😂😂😂😂

[@UwU-si3ec]

​@@Hyjaxaru you can cut down carbon batteries like this it's not goin' to explode. I think you probably cut a lithium battery.

[@JustinShepard00]

If it’s not already obvious, never ever do this. You can buy rechargeable batteries that don’t require you to try and kill yourself to make

[@stevealexander8010]

Agree it's not worthwhile - but this procedure won't kill anyone. That's ridiculous.

[@kierdotk]

​@stevealexander8010 it will

[@AgnijaBasu]

Thank you. I have decided to buy a new battery

[@InnovaDIY]

yes

[@Stimps1983]

This is already a thing you can buy off the shelf.

[@leviofanh]

Rechargeable batteries have a low voltage of up to 1.3 volts and may not be enough for some equipment. Here he built a full-fledged lithium polymer battery with a maximum voltage of up to 4 volts.

[@Mr371312]

@@leviofanh yes they make those. Lithium batteries with a USB plug, AA size and voltage.

[@alexandruilea915]

@@leviofanh There are lithium rechargeable batteries as well.

[@RexxSchneider]

@@leviofanh Check out "14500"Li-ion batteries. It's what you've been waiting for.

[@juoig7799]

Do not use lithium batteries for this, as they will explode if you puncture them.

[@InnovaDIY]

All batteries, including ordinary ones, can be potentially dangerous if punctured. When a battery is punctured, it can cause a short-circuit, which may lead to an explosion or fire.Lithium batteries with a built-in safety circuit, also known as protection circuit modules (PCMs), can provide an additional layer of protection against overcharging, over-discharging, and short-circuiting. These safety circuits are designed to monitor the battery's voltage and temperature and cut off the power flow if any of these values exceed safe levels. watch the video and all safety design kzbin.info/www/bejne/rXPdgGWPhNmheLM

[@poiiihy]

well dont puncture them bruh

[@weegie3343]

@@InnovaDIY well, why did you make this dangerous tutorial then?

[@TheDailyKnife009]

Or any battle try for that matter

[@varel1977]

Из вас сделали полных баранов... Вам даже в голову не придет попробовать самому.. Поясняю- Ни чего не будет , даже если ты разрубишь её топором.

[@questieee]

don't try that. he specifically wired the battery differently between sequences. what he showed was a USB killer. don't risk your devices.

[@InnovaDIY]

please watch the main video the circuit completely safe and sound.

[@TheDailyKnife009]

@@InnovaDIY no

[@yeahnvmnvm1331]

that isn't an usb kiler,still very dangerous if you know how to do it for for it. (don't use lithium)

[@2amichaelj]

Just flexing your soldering skills and know how. It's actually pretty cool you can do that.

[@danielking7988]

For all you saying just buy rechargeable batteries instead. Sure, if you just need rechargeable batteries, that will do. But if you want to gain an immensely beneficial skill instead, follow tutorials for brilliant projects like this. 🎉

[@mohaadnan1345]

This will be hard when the mouse need 4 batteries

[@InnovaDIY]

Yes absolutely

[@shivshivade2378]

Bro which mouse needs 4 batteries

[@InnovaDIY]

It seems he mentioned the toy mouse

[@Strawhats25]

Adult toys also need batteries 😂

[@InnovaDIY]

🤣🤣

[@dawsonramdass1145]

or you know you could buy a pack of these usb rechargeable AAs or AAAs for like 10usd online 🤷‍♂️ I gurantee Even if you have to import them and pay customs and stuff its still cheaper XD

[@shubh_k15]

Work smart not hard totally agreed 😂

[@InnovaDIY]

Yes bro

[@danielhpcx]

Very nice, but AMS1117 will drain this little battery in couple hours. Try TLV733 series, with low Iq current and enable pin, that can be used to set an undervoltage lockout

[@InnovaDIY]

Thanks a lot l

[@GandhiTheDerg]

Drain AND break it because of the lack of a overdischarge protection

[@maharabwahid6109]

who use soldering machine once in their life Only they will understand how awesome your soldering skill is

[@Bipolarvideos]

This looks so much quicker and easier than just setting my house on fire using matches

[@JesseHughson]

Lipo pouch batteries need room to expand and contract. Encasing then in epoxy creates an explosion hazard.

[@monkepog3236]

I was thinking the exact same thing, so many lithium ion batteries in phones after years of use tend to blow up in size, with all that pressure in the epoxy it’ll blow open with even more pressure causing an instant fire and lithium flying everywhere. Please dont fucking diy batteries. Its not safe. At all.

[@adamqasimcodes8983]

nice fact and as if the entire video wasn't a hazard itself

[@jack3534]

Instructions unclear, battery exploded and corroded the environment, police are outside

[@JG-hi6by]

People… Please don’t do this…

[@waltuh1000]

Especially if you used a wrong battery thats doesn't work with this , you will create a homemade bomb

[@InnovaDIY]

the lithium battery has a safety circuit don't worry about that.

[@InnovaDIY]

the battery completely discharge and don't have any problem

[@TheDailyKnife009]

@@InnovaDIY no it doesn’t

[@ProCoder119x]

​@@TheDailyKnife009what doesn't? 1. He used safety circuit which protects battery. 2. If the battery he cutted wasn't discharged, then how could he even upload this video?😂

[@n0klevrname]

I have never seen someone solder SMD components with such a gigantic friggin tip. While I don't think this project is especially great, respect for the soldering skills

[@InnovaDIY]

Thanks for sharing

[@TheBigV_008]

The forbidden homemade battery that insurance companies don't want you to know about...

[@meandmyfish5353]

someones kid will definitely set their house on fire after this

[@InnovaDIY]

I hope parents be careful of child.

[@emmettdja]

​@@InnovaDIYI hope so too

[@damdandusenadam]

Don't, simply don't. Most batteries are toxic. Even it is a zinc carbon battery, don't. Lithium batteries are dangerous and must be handled with care. There are many things that can go wrong here. It simply doesn't worth toxiticy and fire risk.

[@InnovaDIY]

Thanks for mention

[@MenaceLettuce]

It could blow up if exposed to water

[@stevealexander8010]

ZnMn (alkaline) non-rechargeable batteries contain zinc, manganese dioxide & potassium hydroxide. Zinc is "mostly harmless". Manganese dioxide is a strong oxidizing agent but- it's not very active. Potassium hydroxide is caustic. Yes these are "toxic", the same sense as laundry detergent, bleach, drain-cleaner and motor oil. The excess fears ppl have over common chemicals reminds me of school-children screaming "stranger danger". MOST things on this planet are "toxic", but just use common sense; eye protection and gloves.

[@ozonegamedev]

The 1st part of the video: How to blow up your house tutorial

[@InnovaDIY]

no it is not dear you can cut the discharge battery by considering all safety.

[@KangJangkrik]

I hope the creator is okay, this comment section become more toxic than the battery powder

[@Nkemobioma]

Youre smart, and thats it. Dont let people tell you otherwise.

[@ricecakekor]

이 AA 배터리는 2시간마다 충전을 해 주어야 합니다. 리니어 타입 레귤레이터인 AMS-1117을 사용하기 때문이죠.

[@InnovaDIY]

Thanks for your useful data

[@Spiral2404]

Is smart use a 2000 mah battery to make a 200 mah battery?

[@InnovaDIY]

good mention , Thanks

[@Ciloteille]

Well they do sell them for pretty cheap with large capacity. I would say 30 dollars for 4 good ones is better. If this took less then 10 minutes...? it still costs too much. Not worth my free time to do such things.

[@TyphoonWarface]

This isn't a battery. I mean it is, but you think is that the rechargable battery. Converting a 2000mah battery to a 200mah rechargable battery sounds stupid, cuz you need to charge it up 10 times just to earn back the ruined 2000mah. Instead of doing this to new batteries, use dead ones or just do what everyone do: buy 2000mah or even higher capacity rechargable AA Batteries like GP recyko, recyko+/pro series with 2000, 2500, 2700 or even higher mah capacity.

[@Spiral2404]

@@TyphoonWarface that is a better option

[@volodumurkalunyak4651]

​​@@TyphoonWarface do NOT use GP 2700mAh, those are very bad and should be never bought (GP ReCyco 2000mAh are fine). Atrocity in the video is way worse than those.

[@cem1221]

When I didn't read the title, I thought it was a secret USB memory for hiding with a battery.

[@InnovaDIY]

nice concept, thanks for sharing.

[@josidmc0318]

For those who say they are going to blow up the house because they do not have precautionary measures... we present to you: make a casing the size of the AA battery with another material and make the + and - contacts out of aluminum

[@josidmc0318]

I don't know, shell paper or cardboard paper

[@no-expert]

You sort of reinvented the wheel there by making an unnecessary complex rechargeable battery - I like it :)

[@shubhamcoc2699]

When the new battery cost is slightly more than the previous one

[@InnovaDIY]

Yes, but it is for DIY and learning

[@xorik9944]

Чел, тут проще саму мышь переделать, поместив в нее аккумулятор и микросхему зарядки, стабилизатор напряжения

[@InnovaDIY]

This battery can be used everywhere. But you mentioned a very good idea. I will make a project with your idea If you allow to me?

[@PavelMy]

все это никчему как по мне, т.к аккумы садятся десятки раз быстрее батарейки, мне на год хватает хорошей батарейки. Это придется заряжать каждые 2-3 недели

[@xorik9944]

@@InnovaDIY конечно, делайте, если хотите

[@volodumurkalunyak4651]

​@@InnovaDIY wrong. Lithium ion cell here is way too small and there should be SWITCHING regulator instead of lineal one. Both of those greatly limit output capacity and output current to way below capabiities of Alkaline chemistry.

[@AndreyVor]

У меня мыш с акб, зарядки хватает месяца на три, смысл так извращаться

[@Kyermike]

Quick tip: Using one of those trashy voltage regulators may cause backflow, damaging certain also trashy circuts

[@UpcomingJedi]

This is like those other videos where they ruin a wrench, wood saw and a grinder just to make something that scribes circles yet you see a speed square in their tool pouch!

[@InnovaDIY]

please follow the main video for schematic and all detail kzbin.info/www/bejne/rXPdgGWPhNmheLM

[@harrickvharrick3957]

this build is nonsense, you did not make anything that CAN be charged, you only placed the electronics that are NEEDED to charge something (by convert voltage and possibly the amperage a little) into the hollowed-out outer shell of what WAS a battery. it makes no sense at all.

[@hellfire66683]

Hope you like being sued because if someone does this and messes it up, and becomes hurt you are liable for their injuries and or death.

[@SirSlicer66]

Looks like a fire waiting to happen 😅😅😅

[@InnovaDIY]

😊😊😊

[@nonstop_nikhil]

Duracell owner joined the chat😂😂

[@BionicTea]

Keep in mind this is a single battery, it would need multiple usb wall plugs, you can get thise docks that charge 30 wireless batteries at a time.

[@CorruptedKarma]

instructions unclear, i set my neighbors house on fire

[@honkerson]

nah amazon is way easier than doing this

[@InnovaDIY]

if you are busy definitely.

[@Genezis-88]

DON'T TRY THIS AT HOME !

[@InnovaDIY]

if you want do this at home follow our long video step by step

[@TheDailyKnife009]

Don’t try this at all

[@tailsthegreenninja2003]

​@@InnovaDIYTo not try this at home, you do it at home?

[@Kidthatlikestech]

Aside from the difficult soldering that can kill the laptop you are charging it with cutting open a battery can cause a lithium fire, which cannot be stopped with water

[@juicygamer9724]

“Does this actually work, or am I gonna get slapped”

[@defautluser0]

"Is this a cap, or am I gonna have to get slapped?"

[@310_Latchkey_kid]

Don't matter what people say......that was really creative!!

[@InnovaDIY]

Thanks for your support.

[@nataliaturculet8827]

All the pieces for this: 11$ Pipe bomb: 10$ If ykyk

[@sachin1825]

Thanos: "All this for not replacing batteries once 2 years"

[@JEYTODEE]

The amount of steps to achieve this, the knowledge that is needed and the time that it takes to create one of this and the missing safety checks+quality assurance… 😅

[@catman3134]

Oh boy time to cut into my used battery! Famous last words

[@InnovaDIY]

thanks for consideration Please be careful and prioritize your safety.

[@8bit.pixels]

Bro just broke every rule to do with batteries

[@adaliawright6891]

I may not have the expertise to understand, but very impressive nonetheless!

[@InnovaDIY]

thanks for your consideration.

[@DukeDudeston]

A great idea, why hasnt anyone ever made this into an actual commercially available product.... Oh they have....

[@bernardoandretta9281]

today we will show you how to save up batteries: *pulls out rechargable batteries and a battery charger* thanks for watching

[@crockpot5850]

battery totally didnt blow up when you cut it 🥶

[@InnovaDIY]

No Dear it is not blow up, it is discharge and don't have any problem

[@technicalsnehasis2022]

Extream engineering

[@InnovaDIY]

Thanks

[@roman3964]

Not bad to use hqd battery

[@InnovaDIY]

Thanks for your attention

[@rafisofyan]

Or just buy those AA batteries with built in USB charging

[@aryatac]

WARNING: *MAY SET HOUSE ON FIRE*, USE DISCHARGED BATTERIES OR CALL A EXPERIENCED LITHUM DISSECTOR FOR THIS JOB, FATALITIES WILL NOT BE ACCUSED TO THE CREATOR

[@jacksidr6182]

To add to everything been said, tp4056 is just charging ic, there is no protections, especially overdischarge protection. So you battery will probably go under safe voltages before device that uses it will stop working and since you used linear voltage regulator, it has standby current of about 2mA, so even when you are not using the battery, it will overdischarge in a few days. This will quickly kill capacity of battery you used.

[@stampedetrail2003]

I've always wanted to do this or something similar. Like even more fundamental such as a clock spring inside a battery driving a really small generator, you wind up the clock spring by twisting the battery top for unlimited portable off-grid power.

[@SKI79]

Rechargable Batteries: *Am I a joke to you???*

[@InnovaDIY]

nice comment.

[@GS12.3D]

don't buy a car, build one from scratch instead

[@mariobv947]

Why not?

[@АлексейПесорин]

My man really stole a yt tutorial and doesn't even know what an LED is 💀

[@21416]

Funfact - the guy himself buy battery And tells everyone not to buy batteries 😂😂

[@Lgwasherfan5623]

Do you know that rechargeable batteries exist?

[@dominic84p]

Mission misunderstood My house is in fucking flames Ps this is a joke

[@MisterRFY]

Soon, This Battery Will Boom

[@Mithu1999-iu9bv]

Don't worry Only 😂0.01 percent people could do this

[@DiMONDxCHICO999]

Also, dont waste the battery acid, instead drink it! Its so good it will prevent you from eating junk food again, or any type of food either way 😊

[@InnovaDIY]

nice mention.

[@trapgaming9864]

Bro fix that problem that doesn't even exist 😂😂😂

[@Proud2indian123]

When you feel useless remerber this guy is still on our planet 😕

[@Gameplayer55055]

I really love the PCB less recreation of tp4056 charging. Unlike other crappy DIYers that just connect the battery to usb directly or add up a resistor

[@mariobv947]

The TP4054 would have been instead a game changer here.

[@wofo7344]

Hello can somebody go ahed and tell how bateries work

[@agus0]

Good! but I would add battery discharge control

[@adrianomuller3569]

This idea is nice!

[@levyfukawa]

i saw 20 seconds and i still dont want to use them wtf...

[@paulbunyangonewild7596]

Everybody's so creative!!!

[@roux_de_secours]

Tutorial how to die un 10 seconds :

[@aakashmandal1008]

Good for people who like to do this stuff for fun. But a rechargeable AA battery would be best. You had to use a rechargeable battery anyways to make it. And it's not safe to cut a battery.

[@InnovaDIY]

Thanks for your consideration.

[@aakashmandal1008]

@@InnovaDIY welcome

[@morganpg]

How does the positive side on the case connect to the positive side on the battery?

[@InnovaDIY]

Please watch the full video

[@Iwishtoexist]

HOLY HELL DO NOT CUT BATTERIES IN HALF

[@Alisadi-TR]

You could use a small lipo battery for safety

[@Ramy_Ramz]

Cutting through an alkaline battery can pose risks, but typically not a risk of fire. Alkaline batteries contain potassium hydroxide, a caustic agent that can leak out if the battery casing is compromised. This substance can cause chemical burns to skin or damage if it comes into contact with your eyes. However, while alkaline batteries are less likely to catch fire when damaged compared to lithium-ion batteries, it's still important to handle them properly to avoid short circuits, which can lead to overheating. But generally, the primary risk with cutting into an alkaline battery would be the potential for chemical leakage rather than fire. It's best to avoid cutting, puncturing, or otherwise damaging any battery to prevent potential hazards.

[@wagnerjc6]

Sim, é mais fácil comprar uma bateria recarregável, mas eu vejo nesse vídeo uma demonstração de que é possível fazer uma bateria recarregável com os componentes apresentados por curiosidade ou para quando precisar um dia em caso de necessidade.

[@InnovaDIY]

Thanks you are so kind.

[@magicalhats]

(Watches video) ... I guess I'm still gonna be buying batteries.

[@luckypegasusvol7700]

Writing from heaven, I died trying this. Even if i survived i would probably die from the heavy metals inside the battery 2 or 3 years later.

[@InnovaDIY]

nice comment :)

[@mariobv947]

No heavy metal found inside that battery. Zinc is lightweight metal and is needed for your normal body function. Same for potassium and manganese. Ammonia and chloride aren't metals but not that dangerous (literally they are salts). Carbon is nontoxic.

[@Gurpreetsinghpreet1]

Can this become a viral utility product? Would love you buy and make if anyone is ready to give some time in research

[@leeraxgam2]

И тут у меня встал вопрос: где будет хранится энергия? В воздушной пространстве батарейки?

[@thanksgiving1206]

"Top 10 ways to get on the No-Fly list."

[@SpencerMckenithWilliams]

Challenge accepted. Imma do this. See if it works. If it fails, I know how to at least make battery bomb 😂🤣👌🏿

[@manmeetk3939]

This won't work longer as the voltage regulator will keep draining the battery all the time. Hence even if left unused, it needs to be recharged before every use.

[@InnovaDIY]

Thanks

[@mariobv947]

But this is the first iteration of an idea. Further iterations lead to further improvements.

[@mudysaid6602]

At the end is BOOOOOOM😂😂😂😂