Never Rack Your Slide For Dry-Fire Again!

[@humanguswangus]

recently started wathcing a lot of your videos and i like how you treat every video like its the first time someone has ever seen a glock. going over the safety and disasemly perfectly in every video where it is required and not assuming everyone is an expert. really makes just picking up on any of your vidoes extremely easy.

[@leifhoklin2681]

Guy is a turd who preys on newbies. Don’t waste your time with the Glock store.

[@rguy57]

Thank you for great clarity during your discussions. Although your products are not always in my budget. I do appreciate your channel.

[@jimgordon3206]

I learned more about dry fire and how it improves accuracy in the first 8 minutes than anything else I’ve watched. Thank you.

[@bfalconio1242]

Lenny, you are the Jedi of the Glock world. Thank you for the thorough explanations and step by step instructions for all of your products

[@RJ-McCoy]

I actually got this reset kit a couple Years ago and could never get it to work properly with either my Gen4 G26 OR G19, Even after watching this video, ensuring everything was followed to the letter. Not a total loss, since the Laser Ammo laser worked. When I saw you post this video, I figured I'd try to make the kit work again. My kit came with 2 rebound springs. I figured the 2nd spring was an spare, in case I lost one. When the kit refused to work properly, I tried installing the 2nd rebound spring behind the 1st on and guess what... Now it works properly!!

[@perrys62008]

I've used this setup for years. I have a dedicated Glock 19 that I never take the reset trigger out of. I also use the Laser Ammo Laser system and targets. Great Product.

[@LiterallyMeMan]

Mans Rich

[@bobbym1031]

I love regardless what he is illustrating or teaching, it starts with safety check first. He does not touch on the subject for a second, but he throughly goes over the safety check. That’s when you know you are watching the right program.

[@mquinson13]

I used the reset trigger, magic bullet, and their target sets to prepare for my SC CWP. Zero shooting experience. Went to the range for a lesson once, then took my test. Thanks to the dry fire practice, I passed with flying colors. Highly recommend.

[@ZULEEIRL]

This video deserves way, more views likes, and comments. As a new Glock owner the amount of information provided in this one video is astronomical. Thank you so much.

[@kamikazelyricist1563]

I started with the ITarget system. And that alone improved my sight picture and draw speed by a lot. These dry fire systems are very cool, especially when zeroing a new optic. Some overpriced for sure. BUT the usage without spending on ammo makes it pay for itself after so many uses. Great tutorials as always sir, thank you.

[@biker1958]

I use the dry fire mag with my red dot, it works great. I went from a MM in IDPA to an expert in a year and a half.

[@traumajock]

I'm not a Glock guy, but I love watching Lenny's content.

[@sleazykilla360]

then you just haven't found the right glock.

[@wilhelmtaylor9863]

@@sleazykilla360 → I found the "right" Glock. It's the Walther PPQ Q5 9mm. People who truly love guns don't usually put Glock at the top of their list.

[@tomfrommichigan]

Lenny is a very good teacher. Everything is so clear.

[@marklasvegas6816]

After watching 10 of your videos, I was inspired to get a pyramid trigger, a pure tungsten guide rod, a Holsoun PID, a lighter slide, a threaded barrel, and a suppressor along with the extended controls, the reset stiker assembly and I'd love to get the pistol caliber carbine until I realized that my $375 Glock 17 gen 3 just went to $3,000!!! LOL!!

[@alangrant5278]

I’m always pleased to see Lenny and GS pop up. Quality stuff!

[@djblack7590]

Elite Force or Umarex .6mm airsoft pistols that are green gas driven, have a blow back feature and can be used in most backyards across America. These can be found for $150-$500 depending on how fancy you want your plastic spitting training pew to look. Also a great way to stay in pew/training shape.

[@Ravenola]

500 for the kit? Are you kidding me? I better get another gun for that money.

[@DayBowBow]

500 could buy you a gas blowback high quality Glock clone that literally mimics your real gun and would probably even fit the same exterior accessories.

[@anthonygasparini1734]

500 ? Someone is laughing all the way to the Bank! And in this economy 😳.

[@richardclarke1693]

😊

[@joshuaborem7063]

I oppose you all :) $500 pays for itself in just a few trips to the range. I understand going to the range is very important but dryfire practice is extremely important also.

[@Ravenola]

@@joshuaborem7063 Ok then, you know the store link. :)

[@Induced-Chaos]

I like this company. I've been a repeat customer for what feels like since early 2000's, but DRYFIREMAG for dry fire ALL DAY!! And yes, always check your chamber. Post dry fire exercises and cleaning are where most accidents happen.

[@lvgeorge]

Lenny, you are a Treasure Trove of Glock Info.! Glad to see your making these Videos and Helping people along the way! RE: the Dry Fire, Firing Pin Mod,,, sounds like a Nice idea to put on a Spare, Training Glock Upper, used only for that Purpose. That's the Upper you give to the Bad Guy and dare him to Shoot you with, kind of of scenario! Keep Trucking Lenny!

[@riverman4798]

Glocks and this video production have so much in common.

[@2A.Freedom]

CoolFire has a CO2 system that cycles the slide, and gives a little bit of recoil too. Haven't tried it cause they don't make it for the G2C, but heard good things. For my gun, I have the MantisX10 which is pretty awesome.

[@sf2189]

I use a Umarex Gen 4 Glock 17 with Green Gas - it has a LaserAmmo Recoil laser as well as a Mantis X - gun and laser were purchased at Laser Ammo. Hitting a Laser Ammo target while being graded by the Mantis is amazing and has made a huge difference at the range.

[@perrys62008]

Both of those systems are great tools also. I have the Mantix for both pistol and AR 15. I met thé CoolFire owner and had dinner with him at last years NRA annual meeting in Houston. Great product.

[@perrys62008]

Thé MantisX is another great product. I often use it in dry fire training. I also utilize the LASRApp computer software system as well. It gives me feedback. I see where my shots have landed in the targets. I can save my training sessions and analyze my progress over time. And I can do all these things on my home kids present, wife present, safe, draw from holster concealed, no problem. Shot timer, magazine alert to change mags. I can set up Steel Challenge courses of rire in my garage or den. Utilise multiple cameras at the same time. I can vidéo myself as I draw and shoot. IDPA targets, steel targets, USPSA Targets. This system rocks.

[@pzwestern]

They’re really expensive tbh it’s not even worth it

[@gapingshanus]

​@@pzwestern not nearly as expensive as this system. If you're serious about training it's definitely worth it.

[@userenvy]

Ty this is the exact thing i was looking for help with. I was so focused that when i kept racking over and over, i didn't realize i was skinning my thumb with my nail on other hand as i was reaching across!! Now i have a boo boo and it burns😮 lol.

[@paulpugh2480]

Always good info, anything related to firearms is so expensive .

[@perrys62008]

I have two of the small targets that come with the Laser Ammo laser stuck on the back side of my front door. I can see my front and back doors from my living room and often practice with my glock from the couch.

[@billylyle1]

A mile stone In target acquisition and elimination...Im am not a enthusiast But recently became a gun owner...I am Blown Away at this Modern Marvel....Lenny Im glad to have met you on KZbin

[@jlm4855]

Check out the Coolfire Trainer. For me , this is pretty slick for in the house tactical dry fire . You still have a bit of parts swapping but to me , it's worth it for what you get. And , packages are from a slight bit cheaper to , way higher. Just depends on what you want.

[@halfabee]

A good system for dry firing. I only wish it had been available when the UK was allowed handguns. I used to sit at home on non-shooting club days dry firing. Watching the sites. Seeing which way I pulled the sights as I practised. I had a Sig-Hammerli P240 and very quickly broke the firing pin. Which was replaced under guarantee. The second firing pin never broke. I presume I could import a converted Glock into the UK as it is not possible to fire live ammunition in the Converted Pistol.

[@mikeguderjohn9105]

When will you make one of these for the 43, 43X and 48? These small carry pistols could use this, IMO, more than the full sized frames for shooters wanting to practice with things like laser bullets and MantisX products. While I have a number of the larger frames, I'm not buying this for those until one is available for the 43.

[@gblargg]

I was opening a Ruger once and a spring flew out across a messy room. Somehow I heard it bounce off a few things and found right where it landed. As in the video, lost it would have been a mess to get a replacement of the exact size.

[@bab777734]

I have a laser on my glock 17 I love it for training You can watch When you pull a shot

[@leathercoatguy]

Imo, a double action revolver or DA/SA revolver is honestly probably the better move if you have a stock polymer pistol that isn't some racing-gun. I improved so much off of a long trigger pull and learning to hold it steady throughout.

[@johnr9296]

Or just pick up a da/sa hammer fire polymer pistol like a sig p226 lol

[@leathercoatguy]

@@johnr9296 sure, I don't care if it's a polymer gun or not, I was just focused on the merit of DA/SA over buying some gadget system to improve your trigger pull. I don't even own a revolver even though I do own a Beretta

[@wilhelmtaylor9863]

I think changing the trigger completely obviates the point of dry firing. The point is to learn how the pistol's trigger behaves. I dry fire with a laser round. Only have to pull the slide back about an inch on Walther PPQ Q5. I shoot with both eyes open so the non-engaged eye sees the blip on the target I have hanging down the hall. I use a red dot.

[@brianrogers7543]

Another great video Lenny thanks

[@Tmanaz480]

Lenny's enunciation is so good, listening at high speed is a breeze.

[@lancel7998]

Taurus G2 or G3 has re strike capability $260 to $280, laser cartridge $25 , reactive laser target $37 . Total $322 to $342.

[@BDAILY365]

Dry fire so much starting to get arthritis, wearing out RSAs, and have to re-oil slide more often! Dry fire does improve better handling of firearms so much more though!

[@ericschneid3274]

Thanks Lenny, your videos are always informative, 👍

[@okiecustompew]

Hell of a idea! I am just so used to my aftermarket trigger i wonder how big of difference it would be than my real trigger pull.

[@hermannvogel9239]

Awesome product 🎉

[@baltimoreace]

The trigger itself is about 200$. Still expensive but I think it would be a great addition to my training since I already had a laser cartridge.

[@gordonvanderelst923]

Another great video, very well explained and detailed!!

[@insignismusica]

Thank you! Very Informative.

[@phillipneill7315]

Well produced video. The contraption will appeal to certain people and that's great. I couldn't help remembering the golf training Crotch Hook to keep your head down. I'm sure it was extremely effective also. LMAO

[@perrys62008]

Golf hook could save your nuts, training device can save your life. And these devices are extremely effective.

[@dustinmcgill9622]

I have been wanting one of these for awhile 👍

[@brandonmullwray9924]

I have a laser built into my Glock 17 guide rod. I love it.

[@deucedeuce1572]

Best option in my opinion. Built one for a friend, because I can't afford $100s for a laser... but it works great (and don't require an expensive, specific holster).

[@brandonmullwray9924]

@@deucedeuce1572 lol yeah, that's exactly why I got it.

[@joshuaborem7063]

What activates it? I’m interested

[@brandonmullwray9924]

@@joshuaborem7063 The kit comes with its own slide release that acts as a toggleable on/off switch. And it's ambidextrous. It's from a company called Lasermax.

[@Papasquatch73]

@@joshuaborem7063 I may be mistaken but once you use the slide release as the toggle to turn it on it stays on until you turn it off. So it has nothing to do with trigger pull

[@stormthrush37]

Maybe I missed it somewhere in the video but was hoping for a demo section and couldn't find it.

[@adamgaul5539]

That’s great. Now how about getting some gen 3 in stock!! Not the kit, just the resetting trigger!! I’ve been looking for one for months

[@fallguy747]

I feel like the lack of recoil from live ammo would be negative training. Any thoughts on this from someone who has used the system?

[@markh7631]

iTarget is also over priced. Amazon has the laser rounds as well as the reactive laser targets that beep and count the hits. The lasers and targets, separately, are around $30 each.

[@scpittman5769]

Great video just bought a pink rhino laser for dry fire my 9mm what is you thought on it

[@xanthais141]

Everywhere I go has items for Gen3-5. I have a Gen2 G19 that's stock except for Trijicon sights. Any luck on something like this kit for a Gen2 Glock?

[@matthickman9450]

Have you done a video on the DryFireMag yet? Theyve got a trigger reset and laser combo. No mods to your pistol.

[@jockobacumbo623]

Great video Lenny! Glad you finally got out of Commiefornia!

[@alexanderhaile6196]

It's a good system, for sure. But two questions... does the trigger pull feel exactly the same as when you live fire? And, for $500 it had better have wide ranging compatibility, because that's expensive.

[@KBoon]

For $500 you could get two or three airsoft gas blowback guns, gas and bb's and targets to practice with

[@halfabee]

Do you obtain the full weight of the trigger, with the creep of the sear?

[@MarianneSawit]

I was told by the employee at the gun store I bought my Glock19 Gen5 MOS that I shouldn’t dry fire my gun because it will damage the striker fire. If that happens he said I would then have to replace the whole slide. Is what he said true? That I shouldn’t dry fire my Glock19?

[@dyoverdx]

how do you make the pull-weight lighter? it's much heavier than the stock trigger

[@MARC11B]

Need a 43x MOS reset trigger!

[@eyesnearstactical]

Damn! Lenny why you close the San Diego store?? Bro! I survived off your store. Nashville is too far! 🤣

[@FormerMPSGT]

COMMIE KALIFORNIKATION!

[@TexasDog3]

Commyfornia has gone way to communist.

[@eyesnearstactical]

@@FormerMPSGT our state is definitely not 2A friendly, but San Diego is a beautiful place to live. Not to mention us 2A community go to the desert and AZ for freedom! 🤣

[@eyesnearstactical]

@@VinnyBully where you getting your information? We have ammo everywhere, no shortage here. Actually 9mm Blazer 114 grain is $13 box .45 is $26 10mm $28 556 Green tip $13 We also have CCW, I have mine. Only mag restrictions and limited gun roster. Other than that it doesn’t have much affect on training and going to ranges. The big restriction is mag capacity and limited gun choices. No mag restrictions on mag fed shotguns or bull pup shotguns. Great weather out here too! ☀️

[@Nordraw]

@@eyesnearstactical 13 dollar a box? 50 rounds? Never have seen that near me

[@patwieferich3541]

Can I use this dry-fire system with an empty magazine inserted? My reason, I have a G43 with an extended mag so I would like to train with that same grip/feel.

[@stricklandgarageaviation2864]

Great video.

[@Go2Sleep87]

I’ll just imagine the slide is cycling during dry fire like I always have before I pay the outrageous price of this.

[@jamesadkins9904]

Will removing and replacing those steel pins in the polymer frame over and over again, say 2-3 times a week, cause the holes in the frame to loosen up over time?

[@davehardan8323]

Hey Lenny. Off topic but I've been asking Glock to make a slim slide 10mm for years. It's the only thing keeping me from buying one. Could you maybe put a bug in they're ear?

[@markmastrangelo1139]

You are a great teacher/presenter but I would never use this system if every time I wanted to I would have to do this back and forth.

[@chetfriday7636]

Gotcha. Lenny please hire more inventory folks, I have made several calls and am always promised that my order will be coming soon... it has been several weeks.

[@BWHeitmann]

What’s your order number?

[@kolosis1149]

does this work if you have a timney trigger? I would prefer to practice with the trigger I would be using in a competition vs an entirely different trigger set.

[@nicp7746]

I know this is a Glock channel but will this work on an Sig 365 Xmacro. What trigger would you recommend? Also is installation the same for my sig as the Glock

[@Six_One_Six]

This is crazyness when things like the dryfire mag and several other systems exist that dont involve changing parts that amateurs shouldn't touch.

[@wtaboas]

DOES THISTRIGGER WORK WITH THE PINK RHINO LASER FOR THE MANTIS academy?

[@Nordraw]

Sounds like a lot of trouble to set up your gun for that.

[@jameyevans29]

I was about to write the same thing

[@joeytomato]

If you think the set up is a lot of hassle, wait till you have to pay for it...

[@MotoWilliams]

How does this compare to the dry fire mag with laser? (not trolling, honestly curious)

[@ronaldkrause8577]

Any chance you have a same fix for the S&W Shield 2.0? Thanks

[@scottgorman7166]

Lenny did you have a license plate in the 80's called "Gun hand"? If so the wife and I took some of your training at the HB police range.

[@C_Valentie]

Will this work for a 43x or 48?

[@robertreynolds2726]

A SIRT pistol is half of thus with weighted magazine. Love the glock store but not 500 on this.

[@tomcat2512]

What I hate about this is, that you have to reinstall back everything after you're done dry firing. Is there any other system where Glock needs not to be racked again when using this laser bullet? Or can the reset trigger stay there for good so it can be used both for real and laser bullet?

[@Neely1928]

Can the reactive targets work with a SIRT GUN?

[@BensEDCandGlocks]

Why no support for the Glock 43X!?!?

[@wilsonmalmsteen30]

Sir what is the model of your Laser Dry Fire Kit ? Is that the Latest model of GlockStore

[@gerardmcquade9102]

is this able to go into any other striker fired guns like the XDM for example?

[@tlm40216]

Might as well swap out, for a lighter trigger, new guide rod, mod th barrel, plunger, striker ass,and a personalized stop. While you have the whole Glock taken apart. Thing is'you gotta do it 1more time to get ready for bed.

[@96board]

Love McGill, but shouldn’t we refer to this training as dry practice not dry fire practice?

[@roybeau4599]

What is watch your wearing? It's very nice.

[@lvgeorge]

Which Watch is watch?

[@ahmetalp2351]

Hello, do you have a dry fire set for a glock 45? Can not find it on your website

[@glockstore]

SKU: 8355 and select the "9mm Gen5" option.

[@reelfishing002]

For the price and the amount of disassembled and reassemble of your tool, just take the money and hit the range , that’s the only way to get better .

[@EyeXombie]

Yep.. they are bat shit crazy charging that much for training parts.

[@panuvasungsopapong2891]

Can it be use with gen3 glock 34?

[@raykirkwood162]

Do these targets reset their self automatically?

[@JeffreyJamesMusic]

is there a distance that dry fire wouldn't be accurate because of the gravity drop?

[@robertjason9795]

Beautimous. *chef's kiss

[@MineStrongth]

Who has time to swap all that over just to do some dry fire? Unless you have a dedicated firearm for leaving this installed in, it seems like more effort than it's worth. Get something like coolfire trainer instead. Quick barrel change and you're done. Plus, you get a reciprocating slide and still train with your actual carry trigger.

[@jrfoleyjr]

Do I really need a reset trigger for my Glock 21 gen 4? Disregard that question. I am typing while watching. You are converting a firearm into a practice weapon with a laser. My G21 is a carry weapon.

[@davidmoore-xu6od]

very coollove your videosthank you

[@denmanfite3156]

Holy shit I wish I knew about that trick with the sleeve to remove the backplate.

[@ScooterTrashTactical]

I keep getting an internal error @ the Glock Store page. nothing loads except page banner....

[@michaelwehby]

how much does this cost for a new 17 ?

[@iZaya24]

Cool fire trainer is by far a better dry fire training kit not to mention it’s 150$ cheaper

[@michaelstraughn3465]

500 dollars, datts crazy..

[@gress12000]

Do you have a link to buy this?

[@glockstore]

We can't provide links to our website here on KZbin but you can search SKU: 8355 at glockstore .com