The Best NEW Trigger for your Glock!

[@ComradCyborg]

Came here to learn about the new pyramid trigger, but found the most comprehensive and informative video on the inner workings of a gen 3 Glock probably anywhere. And I thank you for making it so easy to understand. If only there had been a resource like this when I first got my brand new gen 3 19... Also, the new trigger seems cool too!

[@flipflopping]

Agreed. This is absolutely going on my Gen 3 G21. Great info, indeed.

[@crinner73]

So it does wk on a gen 3? It seems like it would, but I was debating on it..... let me know

[@LTLoudpack7100]

​@@crinner73he was installing the git into a gen 3 for the whole video.

[@bderryberry4987]

After watching this video, I went right down to the Nashville Glock Store and had the Pyramid Trigger system installed in my Glock 43. I even got to see Lennie working in his store. Great facility!!!

[@NFEzantiszar]

How much was it mind me asking

[@tldnr]

Everyone should watch these videos before purchasing a firearm. You would learn basic safety and general construction.

[@michaelslisher4652]

Very informative. I've built a couple P80 (Gen 3 parts) and learned a couple things I didn't know about: trigger pin / slide stop engagement and extractor / safety plunger interaction. I think a Pyramid Trigger Gen 2 may be in my near future.

[@vernlw]

Lennie, I’ve got to tell you that all your installation videos are absolutely amazing! Your videos make working on these guns possible by the fairly adept working man. I can’t say enough about how educationing your videos are. You should be proud of yourself for how you make these actions so easy and possible to do. Thank-you for all your work making these!

[@danted232]

Just bought a gen 2 trigger from your store, this video is a big help for install!! THANKYOU!!!!

[@GaryASobek]

I put a Timney trigger in my Freedom Wolf. I liked the Pyramid Ultimate that I had in another pistol so much that I ordered another for the Freedom Wolf. My Flat Face Gen 2 Pyramid Ultimate arrived Thursday. Did not realize that it was Gen 2. I like the original so will find out if the Gen 2 is better than the Gen 1. This will be my third Pyramid trigger.

[@emiliolerma5051]

How did you order it I ordered it and it got canceled and never came I tried it twice already

[@charlesharper7292]

OOooo! " Here in Nashville we have better equipment, and better people." I sure hope your San Diego crew didn't pick up on that...

[@vicentesanchez7168]

Great To See Mr Lenny Magill Looking Yoked Up And Great Attitude and Looking Healthy Excellent Work Mr Lenny Magill

[@cagatayyapici491]

thanks Lenny Magill. Really good job

[@BigDre357]

I had the original trigger and loved it so I will have to grab one of these for a build that I am working on

[@jamesarm1]

Which trigger configuration do i need for a 4 pound trigger on a Glock 40 Gen 2? Basic, Advanced or Ultimate? Thanks!

[@stevenreynolds7219]

Excellent video sir as always. This might be my next purchase instead of the threaded barrel.

[@t.g.c.trivigunchannel2512]

I have a G19 gen 5 mos and every time I go on the Glock website the parts I want has been out of stock for months? when do you guy restock ?

[@CrazyBoyDon]

I bought this trigger on March 20th and a reset trigger, neither have shipped!!! I learn a lot from your videos, but when it comes to fulfilling orders your company comes up short.

[@a.N.....]

Thanks loves the video. Super informative on the how and the why, which is super helpful in understanding all the mechanisms.

[@distilledfreedom1840]

I've always been hesitant to replace my Glock triggers. Feel like it could somehow make it less safe. Am I right in that line of thinking?

[@bewhitey]

I couldn't find that fancy hammer on the GS website. I think you get awarded the golden hammer after you become a Glock legend like Lenny

[@straightshooter6309]

Very well done…and nice videography as well.

[@SoCalCrawlers]

Hey Lenny, so I have a Gen 1 Pyramid trigger I bought from you back at the Murphy Canyon store. What is the special offer if I wanted to upgrade my G22RTF2 to the Gen 2 Pyramid trigger? Thanks

[@leyderness3553]

Great explanation!!! Especially if you have not done this before. Your components are excellent!

[@jesus2299]

Finally people won’t have an accidental discharge because your screws came loose👍🏼

[@DMo-yq2qq]

WOW!!!!!! I’ve been searching for a new trigger for my Glock 17 and after watching this video I’m 100% sold. I am so excited to place my order and I haven’t been more excited to upgrade my handgun then I am now!!!

[@stand4truth44]

I was born and raised San Diegan!! I've been in the Midwest for 18 years and love it!! California is going down the toilet!👎

[@richardevans413]

excellent video

[@JRMoritz]

Great job… do you do the install if the gun is sent in or dropped off?

[@jayjay93gsxr]

Always great Videos! I’ve met and visited you several times in Nashville already, even had you actually working on my guns. Are the new gen 2 flat face triggers available yet for the Gen 5’s?

[@f8c3themusic]

Are these in stock for the gen 5 models? Any luck getting one?

[@gunsfan4ever]

I have actually learned a lot from you. I appreciate it.

[@jonny69420]

Don't fall for it this guy just made his account

[@kevinrtres]

Great video - always wanted to know what hoops one has to jump thru to get a better Glock trigger. Might as well just go for the CZ P10C and be done!

[@leyderness3553]

Since I live in Indy now I need to come check your beautiful new location out!

[@alaneubanks]

Are you making the triggers fit the pistol or do you still have to make the pistol fit the trigger? I returned my first pyramid trigger for that reason but if the new trigger is oem width with no frame modification it may be worth it.

[@brandonwindsor5313]

Good question i had no idea trimming to the frame was even required

[@glockstore]

The Pyramid Trigger is a drop-in trigger. no modification needed, just installation.

[@Three60Crusader]

Does it hold its own against the Johnny Glock drop in triggers?

[@tangomantactical]

Im a Glock fanboy and never would I of thought Lenny would open a store in Nashville. Im about 50min south of it. I have the Gen 1 Pyramid trigger. Flat face. I am not a fan of curved triggers on any firearm. My Pyramid trigger has been unbelievably reliable and feels phenomenal. Its in my $2,200 Gen 3- G19 Gucci Glock. There is really no sense in looking elsewhere for a premium trigger. The price, the quality and the customer service is 10/10. Zev, Agency Arms, or Timney have nothing on this trigger.

[@charleshenson4183]

Well I'm close to Nashville to,but once I realized that this is just a chrome played turd,I'm going with timney.

[@Ape76]

I am filing the trigger safeties on all my guns to make them flash, when pressed, with the trigger ! Supper comfortable after that and free!! Its plastic molding so little sharp edges is always to be expected but never a reason to spend hundreds for upgrades ;)

[@chrisgilbert2152]

tried to order twice, waited months, cancelled twice!!

[@A_Son_Of_Yahuah]

Their ordering/processing department is trash‼️

[@Yankeesfan239]

If I already have the ultimate pyramid trigger installed and I want to upgrade to the Gen 2 does that mean all the old parts have to come out or just the trigger

[@glockstore]

just the trigger! Be on the look out for that email offer!

[@BubaBlaze]

Did not intend to watch this video but I did.. and now I am ordering a bunch of upgrades for my Gen 3... lol thanks

[@bigdaddybaker]

Are the pyramids drop safe ? I heard timneys are not. What’s the best drop safe trigger upgrade for Glock to carry with ?

[@fosterdyche]

The spring in the trigger housing does not help reset. It helps reduce the trigger pull.

[@youmasajp]

This video is great, as all Lenny's videos. However, in the world where we now have the Tinmey's Alpha triggers, I wonder if anything else is up to that bar. They completely flipped how the original "perfection" was designed.

[@tangomantactical]

The Timney triggers are not reliable. I've watched match after match where they have not performed. I talk with gun stores, sales people who actually own one in a Glock and I get the same message. Do not trust your life with it. Pyramid triggers have been well documented and there is years of data. Timney doesn't have that.

[@maxmarquez2911]

I’m looking at this video because I’m replacing my Timney alpha that has light strike after lightstrike and a cracked trigger bar.

[@Jpcrxinaz]

I’ve got tons of glockstore parts on some of my old Glock builds. I’ve bought three ultimate pyramid trigger kits. One of them the skeletonized striker broke during the first mag. One of the kits fired from the slide slamming forward, the other kit works beautiful. Hopefully these ones are more consistent quality.

[@theunknownatheist3815]

I have the Gen 1 Pyramid Ultimate Trigger in my G27 and I LOVE it! 🔫🥰 It feels great. Light years better than the stock trigger.

[@paulfiebke3909]

Keep up the good work and God bless

[@LadyGodiva-hi3ym]

Whoa, mines been order since you sent out the 50% off coupon, and we are well over a month and nothing. Make sure people know this before ordering!

[@DjRayRay09]

I am amazed how easy you make that look thank you for the video

[@tcjohnson3437]

Been using the one that came on the pistol outta the box,,, for forty years now. They work fine for me.

[@QuietMikeW]

The video needed a close up of the trigger pull, to see the wall, break and reset visually. Nice kit

[@jameskidd61]

Thanks for all your videos your making saving me money on parts installs with your tutorials your like the professor of glocks

[@GunSlinger_Peanut]

Great video

[@markallen4001]

I need a trigger for my 19 gen 5 that would decrease the distance from the back strap to the trigger front. Love my 19 ( close to 1500 rds so far)but my trigger finger is a little short for a comfortable grip. If it was 1/8” closer it would be just right. Any suggestions? Thanks. New sub.

[@wuzguud]

This is such an amazing video so much information thanks😊

[@goodwater2020]

Lenny, I bought your 3.5 ghost trigger back in the day. Why is this better? Love my part.

[@Zatracenec]

This an amazing video! So well explained with extra info.

[@billl1451]

does this trigger make your shooting finger sting?

[@WORRO]

Excellent video. Thumbs up ~John

[@flipflopping]

I want one. I also want ALL the tools in the opening of this video.

[@ronniegrumbles-ok3jw]

Have any of the triggers sold through the Glock Store been approved for use with police departments?

[@Juribe17]

I hope you guys make it .45 soon

[@dadams1437]

This is THE most helpful/ useful Glock takedown video anywhere.

[@eyesnearstactical]

Nice! I’m going to get one for my new G29SF Gen 3! I shop at Glockstore San Diego best customer service in SoCal!

[@looweegee252]

Pocket 10mm club represent 👍

[@eyesnearstactical]

@@looweegee252 yes sir! Bro! Before I bought the G29 people were saying,” man that recoil is snappy!” Nope! Not even! I shot 174, 200, 230 hard cast! The G29SF ran smooth. However that 230 grain wasn’t no joke! Still got my good groupings but it’s hot at 230 grain. The 174 hollow by hornady was like shooting 40 S & W. I think the 200 grain is the sweet spot, but if in the woods I’m rolling with 230 hard cast! I have 4 Glocks, (G19,G23,G21SF, & G29SF all Gen 3 due to California restrictions.

[@looweegee252]

@@eyesnearstactical 10mm is a great option with the thick Glock frame even the small 29 frame is enough!

[@johnquinn4680]

I forget sometimes that people in commiefornia are literally 25 years behind in glock series.

[@eyesnearstactical]

@@johnquinn4680 well if you know Glocks? There really not much difference from Gen 3 to a Gen 5. Here are a few differences, I’m sure there are more but these are the most obvious. Gen 4-5 No finger grooves which I learned to like. Ambidextrous controls and able to switch mag release. (Btw I’m a lefty) Orange followers. Maybe a better trigger on some Gen 5 models? Maybe a better extractor definitely on the G23 Gen 4. But for the most part Glock hasn’t changed anything since it’s first pistol. Just different frame thickness and modular back straps. That’s what makes it so great, you can customize it to your liking. Otherwise it’s a Glock. Don’t really get the 25 years behind comment. Maybe with access to a variety of different guns and mag capacity absolutely! But not Glocks! Lol!

[@gr3494]

Is there an order amount where there is no shipping charge?

[@tylerbeck3806]

Do a video teaching how to make sure the install is up to Glock factory safety specs. Many people appendix carry these days making them reluctant to put a kit in on their own.

[@johnquinn4680]

If someone can't install a glock trigger they aren't intelligent enough to drive or do basic tasks either. Glocks are essentially retard proof for fucks sake.

[@HarmsWay500]

Excellent job. I wish I would have known these tricks! Would have saved me a lot of effort. I’m checking the trigger out now.

[@Rocco4Jesus]

I just buffed my factory parts to a near frictionless sheen. Made a difference until my new trigger comes in!!

[@tobuscusfoop]

good way to keep all your pins together

[@HoneyKhomOfficial]

I heard Lenny say there was a special deal for those who have the original pyramid trigger but no information about it. I would definitely like to upgrade to the 2.0! Ant information is appreciated!!

[@zader2899]

Hey message me if you find out the deal I have a gen 1

[@robinperronjones5024]

Come on Lenny, I have a Gen 5 G26 & G43 with stock triggers, no problem. Tested all the rest, stock is fine.

[@douglasphillips24]

I agree. I spend my $ on ammo then after about 500 - 600 rounds factory Glock trigger gets buttery smooth. As far as the trigger safety tab I just don't see what he's whining about cause I've shot hundreds in one session without issue. My finger hurts😭.

[@robinperronjones5024]

@@douglasphillips24 indeed correct, training and ammo makes economic firearm sense. All these accessories are way over priced and “really” not necessary, If it works for the individual then there is no need to change or fix it. I think Glock know what there are doing.

[@manuelcabeza6922]

I Have a G26 Smooth But a 43x Mos ... Not Smooth. I bought a Timney Trigger Plate And Ghost Connector 4.5 I'm Sure It will Be Smooth As Butter

[@simpsimps553]

Lenny maggill is the god

[@alfonsedente9679]

I live in a 1 room studio apartment, so removing the ammo from the room isnt possible. Can i bring all my ammo to my friends house while i work on my gun at home?

[@dumbeezy5480]

are you trolling

[@MM-qv5lf]

lol 🤣

[@cdsmit27]

If you just swallow all your ammo. You'll have to wait till you shit it out before you can fend off your attacker. That should be plenty of time to work on your gun.

[@davidnoble9474]

Just ordered one

[@stevenrodriguez3982]

I’m looking to put this trigger in a PSA Dagger, do you know if this will fit properly in the dagger? It should take G19 gen3/4 parts but I recently had an issue with another trigger meant to fit the gen 3/4, though it was a much cheaper brand.

[@thatkajunguy8029]

I would call PSA and ask your question

[@nolagospeltracts8264]

How is the factory trigger on the Dagger?

[@DavidChatterton-j6b]

I have a Pyramid adjustable in my Glock 33 and 43X. Love it.

[@JifferRiffic]

at the rate the ATF is going all triggers are gonna be banned.

[@AndrewWhite-t4j]

Can I get pyramid trigger for gen 4 glock 17?

[@JDRay-hq7lm]

Where can I find those new triggers on line? Also, glad to see you goo the hell out of KommieFornia, Can I get this package to a G29?

[@rpm221]

Cool video, I couldn’t get through it all due to I felt like I was being talked to by a third grade teacher 🤷‍♂️

[@mikrch3935]

Lenny, I love your video's. You take your time and explain in a way that it"s easy to follow. If I could mention one thing. Some Glock's are law enforcement only in Calif ie: Glock 43X. You may mention that when reviewing them. If someone is not aware of that, they'll find out when they go to purchase one. Just a suggestion. Probably not an issue in Nashville. Other than that, thanks for the video's

[@foxmulder7616]

Law enforcement and gangbangers lol

[@modelflyer2003]

Nothing says Glock Perfection like replacing 50% of the parts to make it better.

[@nolagospeltracts8264]

I don't think these people actually like Blocks.

[@phineusmcclintock1]

I cannot get the trigger to click with that double diamond connector and pyramid trigger - I had to reinstall the OEM connector. However the double diamond connector works with the OEM trigger just not DD with pyramid - any tips Lenny?

[@TexasLegend]

Did you get it figured out? Mine does the same thing

[@phineusmcclintock1]

@@TexasLegend returned it and got a timney and i recommend you do the same

[@leyderness3553]

What a great offer!!!

[@gilbertlazcano482]

How long does shipping take ?

[@dgilly716]

Which trigger is newer and or better..this one or the glock performance trigger?

[@glockstore]

Pyramid trigger is by far a superior trigger. Not only is it lighter, it's customizable and made from aluminum.

[@dgilly716]

@glockstore thanks for the feedback..I'm still torn between a connector and trigger? Can you tell a difference in the oem minus vs the double diamond?

[@kentwilliams4152]

I was looking for the trigger you spoke about that was a pyramid trigger that was fixed. I typed into search the name and kept seeing the Pyramid trigger Gen 2. I kept looking for a Gen 3, Gen 4, and a Gen 5 model, but no success. Now I know why! 😳

[@Samson-dn4eo]

i wanted to ugrade my Glock with the new gen pyrmaid and tungsten guide rod but all the people i asked said dont do it becuase it makes the glock less liable.

[@larrylucas5731]

Do you have one for the 43x?

[@glockstore]

We do! www.glockstore.com/Non-Adjustable-Pyramid-Trigger-for-G42-43-43X-48

[@izzyp8784]

Is the San Diego store closed?

[@holgerdanske8935]

My Feinwerkbau model 65, Olympic Air Pistol, has a take up, and a 500 gram let off. As far as I am concerned, any handgun, with a let off, of over 2,5 to 3 LB is a distraction to accuracy, all those handguns with a 5 Lb or more, let off, are nothing more than a liability. Had a SIG Neuhausen, 9 mm as a service weapon ! The Rolls Royce, of handguns ! 3 lb let off, and super accurate !

[@jonny69420]

I have a question about a Glock 17 if I ad a extended 16in Barrel will there be issues

[@jonny69420]

When I see people like you are know they're scammers

[@6happydude3]

Put them in my guns and the difference is like night and day!

[@NHWilderness]

I'm a new subscriber 2 ur channel found ur vid about sig macro 9 vs glock 19 I had bought the sig yesterday and there was a new gen 5 glock 19 there in the case so I come home got my HK 40 cal tactical brought it down and traded for the glock. It's my 1st glock ever I put 200 rounds through both and the glock is definitely awesome but in the end I like the macro better although both guns come with small med and large handles the small glock handle that came on it is still a little bulky for my hands the sig fits like a glove.i seemed to have the same results in accuracy between the 2 but the biggest disappointment for me with the glock is the trigger I hate it it pinches my finger and isn't nearly as smooth as the trigger on the sig it seems to drag a little b4 u hit the wall..idk great shooter but doesn't fit me well and don't like the trigger I wish I could put the pyramid gen 2 in it myself but there is no way in hell I would ever be able 2 sadly I'm not very mechanically inclined. Is this something you could do? Can u even send a gun through the mail idk and I don't know of anyone around my area being in a small town in NH that is a licensed gunsmith that could do it.that trigger I think would improve this gun immensely.

[@jeremyshearer]

Can my Glock 19 Gen 5 trigger assembly fit into my Glock 26 Gen 3??

[@glockstore]

No. Gen 3 and Gen 5 parts are different.

[@jeremyshearer]

@@glockstore tiger bay ticket because of the ambi frame right?

[@somerandomguyfromtheintern480]

I miss that they're not in San Diego any more, but they can do far better work out of state.

[@beautyofnature4131]

My opinion this trigger would be best for 43x

[@spencersmith2542]

How are you guys going to release a gen 2 when you never have gen 1 in stock!?

[@tylerbeck3806]

Tell me you hate california without saying you hate california! Haha

[@mynameismyname5124]

Make a gold one , and I'm in!

[@glockstore]

We do offer Gold!

[@markrichard2349]

Thank you, if I mess with it, I break it cus I’m never satisfied

[@jacobhughes5664]

How can you do that with one hand

[@juanverdugo764]

Are trigger mods legal in Ca.?

[@dumbeezy5480]

Pretty sure they are but don’t quote me on that