Never use Arrma Body Clips again! Finally a TANK SOLUTION

Never use Arrma Body Clips again! Finally a TANK SOLUTION - More MOD Install tips

Рет қаралды 2,081

Ай бұрын

Better than Arrma body clips and proline screw caps!
For extreme bashing and capable of handling the heavy duty basherbodies or indestructible body’s!
You can go 2 inch, or 1 1/2”, one utilizes more spring, but stands a little taller and suggest a pad be put in the cap section of the body. Well, the other is more into the stock height. Your call. Ive yet to come close to bending my 2 inch set up. It’s totally tank thus far. But I will report if any changes.
If you choose 2 inch, I recommend some padding in the upper cab so the cage gets utilized.
In either case, I definitely recommend the basherbody. This mod was specifically inspired to accommodate to handle the Basher body. But is also totally great for the stock shell as well.
If planning to just run the stock, thin body with no durability modifications I recommend 1 1/2 inches thumb screws,, and definitely utilizing the rubber washers
the longer 2 inch thumb screws, link below (couldn’t find on Amazon)
THE PARTS YOU NEED
Mod parts - EastTactics Storefront
www.amazon.com/shop/easttactics
Pick up direct from Basherbodies
www.basherbodies.com
M2C body mounts and basherbodies:
m2cracing.net/shop/shop.php#!...
2” Thumb Screws
boltdepot.com/Product-Details...
Patreon (thank you): www.patreon.com/Easttactics?f...
Shirts
east-tactics-shop.fourthwall.com
M2C Explained Playlist:
• M2C Explained Series
info@easttactics.com

Пікірлер: 25

@M.D._RC Ай бұрын

Do the oval nuts on your setup fit inside the spring or do they sit on top of the spring?

@EastTactics Ай бұрын

Here’s a link to the specific spot in the installation video that shows you up close. I think these links where I set it to a specific spot in a video only work on desktop. For whatever reason on phones, it still starts at the beginning. So scroll to 11:44 kzbin.info/www/bejne/bZrGqWqsjbimm5Ysi=iMHNqdZBpmBmx4dU&t=709

@M.D._RC Ай бұрын

Did you use the servo saver springs im asking because the uxcell 12mm od, 1.6mm Wire size, 20mm Free Length springs in your amazon store front dont fit around the oval nuts that's why I was asking my first question

@EastTactics Ай бұрын

@@M.D._RC Yeah, the springs only need to fit around the bolt

@bigaltough Ай бұрын

Randy u r a genius u have given me a fab idea and I will share it with u soon I think I'm goin to do it to and the idea behind it both ideas come from u coz u r the man when it comes to mods on the trucks 😂😂😂

@EastTactics Ай бұрын

Nice! Look forward to seeing you do it!

@johnboy5632 Ай бұрын

Dude this is an awesome Mod. I will definitely do this upgrade. Thanks man. Sick demo’s too

@EastTactics Ай бұрын

Thanks John!!

@TurtleRc Ай бұрын

Ya looks like an indestructible set up. 👏🙌🐢

@right-behind-you Ай бұрын

Lighter springs might even save bodies, or at least prevent some of the cracking.

@EastTactics Ай бұрын

Well, technically, any spring is gonna be better than the solid stock set up. I mean, I only recommend the rubber washers because with this set up now you can accommodate for them with the extra space. But I would highly recommend running rubber washers. Even If you could fit them underneath the stock body on the stock composite body posts. You just can’t. I guess what I’m saying is that I’m not suggesting rubber washers because I know this set up (with springs)) has a higher likelihood of breaking through the body. That can happen no matter what. I guess with the 2 inch bolts, because they are higher it can increase the chances. I don’t know..anyway lighter Springs wouldn’t hurt to try. Just gotta make sure they are strong enough to keep the force of the bolt up. Thanks for commenting

@CanadianRC96 Ай бұрын

I think ill be doing this on my Kraton once I finish off the stock body. This is extremely beefy and well thought out 👌💪 thanks for sharing the tip!! Ps. My May Challenge video is up 🤙

@EastTactics Ай бұрын

Sweet adding it now