New! $2,095 All-in-One System: 48V Waterproof "IP6048" 6000W 120/240V

You can buy it here (affiliate link): shareasale.com/r.cfm?b=172923...
Now for an all-in-one that I recommend, check out this page: www.mobile-solarpower.com/48v...
Does off-grid solar confuse you?
Check out my DIY friendly website for solar system packages and product recommendations, and so much more!
www.mobile-solarpower.com
Join our DIY solar community
#1 largest solar forum on the internet for beginners and professionals alike:
www.diysolarforum.com
Check out my Book
Best-selling and beginner-friendly guide to 12V off-grid solar!
amzn.to/2Aj4dX4
If DIY is not for you, but you love solar and need an offgrid system, check out Tesla Energy! They will price out a system and get your house offgrid: ts.la/william57509
My DIY Solar Equipment Recommendations (Constantly updated! Check here first):
12V/48V Lithium Solar Batteries: www.mobile-solarpower.com/sol...
Complete Solar System Component Directory: www.mobile-solarpower.com/sol...
Complete 48V System Blueprint: www.mobile-solarpower.com/48v...
Plug-N-Play System Recommendations: www.mobile-solarpower.com/ful...
Complete "Add to Cart" 48V System Kits: www.mobile-solarpower.com/com...
DIY Friendly Air Conditioner/ Heat Pumps: www.mobile-solarpower.com/sol...
My Favorite Online Stores for DIY Solar Products:
Signature Solar
Offgrid One-Stop-Shop. Best Value 48V LiFePO4, Victron and Offgrid Specific Heat Pumps:
www.signaturesolar.com/?ref=h...
Current Connected
SOK, Victron, Mr.Cool Heatpumps and High Quality Components. Fantastic customer support:
currentconnected.com/?ref=wp
Litime
My favorite 12V budget battery!:
www.litime.com/?ref=XBIA62RFc...
Epoch Batteries
My favorite high-quality 12V battery:
www.epochbatteries.com/produc...
Renogy
A classic 12V solar store that has been around for ages! DC to DC Chargers and more!
renogy.sjv.io/n1VjXx
Rich Solar
Renogy's biggest competitor! Similar products, but at a better price:
richsolar.com/?ref=h-cvbzfahsek
Battery Hookup
Cheap cell deals
bit.ly/2mIxSqt
5% off code: diysolar
Contact Information:
I am NOT available for personal solar system consult! If you wish to contact me, this is my direct email: [e-mail]
Join the forum at diysolarforum.com/ if you wish to hang out with myself and others and talk about solar
FTC Disclosure Statement and Disclaimers:
Every video includes some form of paid promotion or sponsorship. Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take an action after clicking one of these. My videos are for educational purposes only. Information is subject to change/update at any time. Electricity is DANGEROUS and can kill. Be smart and use common sense :)
DIY Solar Power with Will Prowse is a participant in the Amazon Services LLC Associates Program,
An affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

[@WillProwse]

Now if you want an easy to build and reliable system, check out my free 48V offgrid blueprint that uses LV6548's: www.mobile-solarpower.com/48v-complete-system-blueprint.html And my 48V all in one buyer's guide: www.mobile-solarpower.com/48v-all-in-one-buyers-guide.html And check out our forum! It is free for everyone: www.diysolarforum.com/ And the charging current was NOT referring to the AC current. It was referring to DC current and that's why I posted the settings page in the video to avoid confusion. *Does off-grid solar confuse you?* Check out my DIY friendly website for solar system packages and product recommendations, and so much more! www.mobile-solarpower.com *Join our DIY solar community!* #1 largest solar forum on the internet for beginners and professionals alike: www.diysolarforum.com Check out my best-selling, beginner-friendly 12V off-grid solar book (affiliate link): amzn.to/2Aj4dX4 If DIY is not for you, but you love solar and need an offgrid system, check out EnergyPal! They will price out a system and get your house offgrid: energypal.com/diysolar/ *My Solar Equipment Recommendations (Constantly updated! Check here first):* 12V/48V Lithium Batteries: www.mobile-solarpower.com/solar-batteries.html Solar System Component Directory: www.mobile-solarpower.com/solarcomponents.html Complete 48V System Blueprint: www.mobile-solarpower.com/48v-complete-system-blueprint.html Plug-N-Play Systems: www.mobile-solarpower.com/full-size-systems.html Complete 48V System Kits: www.mobile-solarpower.com/complete-48v-solar-kits.html DIY Friendly Air Conditioner/ Heat Pumps: www.mobile-solarpower.com/solar-friendly-air-conditioners.html *My Favorite Online Stores for DIY Solar Products:* *Signature Solar* Offgrid One-Stop-Shop. Best Value 48V LiFePO4, Victron and Offgrid Specific Heat Pumps: www.signaturesolar.com/?ref=h-cvbzfahsek *Current Connected* SOK, Victron, Mr.Cool Heatpumps and High Quality Components: currentconnected.com/?ref=wp *Ecoflow Delta* My favorite plug-n-play solar generator: us.ecoflow.com/?aff=7 *AmpereTime* Cheapest 12V batteries around: amperetime.com/products/ampere-time-12v-100ah-lithium-lifepo4-battery?ref=h-cvbzfahsek *Renogy* A classic 12V solar store that has been around for ages! renogy.sjv.io/n1VjXx *Rich Solar* Renogy's biggest competitor! Similar products, but at a better price: richsolar.com/?ref=h-cvbzfahsek *Battery Hookup* Cheap cell deals bit.ly/2mIxSqt 5% off code: diysolar *Contact Information:* I am NOT available for personal solar system consult! If you wish to contact me, this is my direct email: [e-mail] Join the forum at diysolarforum.com/ if you wish to hang out with myself and others and talk about solar *FTC Disclosure Statement and Disclaimers:* Every video includes some form of paid promotion or sponsorship. Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take an action after clicking one of these. My videos are for educational purposes only. Information is subject to change/update at any time. Electricity is DANGEROUS and can kill. Be smart and use common sense :) DIY Solar Power with Will Prowse is a participant in the Amazon Services LLC Associates Program, An affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

[@rodneyhunt]

I think the 30 amp setting is from the grid not the battery amps. so 240 x 30=7200watts. 7200/48=150 amps to battery. Just an idea.

[@WillProwse]

@@rodneyhunt yes I thought that too, that's why I posted the manual to show that it's the DC battery charging amperage setting. Not ac input. I thought what you thought right after I had the 30A breaker flip.

[@jmpcrx]

I have an epever upower HI series all in one inverter (3000 or 5000), i have the 3000. Its a pretty good inverter and cost me £550 which is very cheap. Only downside is no scheduled charging from grid and lack of any bluetooth. So i use a shunt (junctek 140f) and contacts to turn on and off charging at cheap rate via wifi smart plug. Would be a good one to review.. Best for the money imo, i looked at them all.

[@Bigdaddyslasher]

I hate HMI touch screens they're very problematic vs a old school switch and button setup.

[@farside87]

@@Bigdaddyslasher I agree, the touch screens are problematic, but this unit is also suppose to be able to be mounted outside. Waterproofing would be harder with manual switches.

[@gsantee]

You provide so much knowledge to the community. Your critisms hold these manufacturers to a higher standard; making the products better over time. Thank you

[@soberpickle8195]

If you get frustrated with this unit's software, it tells me I would not even consider buying this unit. Thanks for your videos, I have learnt so much.

[@stevevet3652]

Will, I am glad you showed this video. You have years of knowledge and experience to deal with this unit. As a DIY, if I had to set up the IP6048 unit and ran into as many problems you had to deal with, I would have put my sledge hammer through the unit.

[@BenjaminLee-asianbearcub]

thank you for posting videos like these where you encounter issues/challenges with products. it's educational for both us the consumers, and hopefully the manufacturers too. it's an opportunity for them to take notes about the pain points with what they're putting out in the world, and hopefully fix them / improve future versions.

[@patrickmckenna9877]

I am learning a lot, just by watching by watching how you work through the frustrations of "set up". Something that I have yet to go through.

[@sevans66]

Your definately an advanced user...imagine us first timers trying to get this set up...I am sure the words coming out of our mouths will be much worse

[@bobcole3852]

Thanks for playing with this one, it was on my list to consider!

[@markusallport1276]

Totally enjoy learning thru your videos! Thanks Will!

[@rjtumble]

This was a great review, hopefully the manufacturer sees it and accepts the feedback.

[@seanbrossard8178]

I am glad you show us the installation and start up issues as apposed to a discussion about your findings . Good job, hello from Sacramento. Still not receiving notifications on same day of release.

[@TheKallipugos]

Wow. Thanks for making sure none of us have buyer’s remorse for getting EG4s

[@josedavidcrespo]

Your patience is amazing.

[@billlee2703]

Will ,I would like to thank you for your time, with your help and videos, I successfully installed a 12 panel ground mount Sinclair rack, solar DC breakers, 4800watt array, 6000 watt rich solar hybrid ,3 jacpro 100amp,5120 Whrs works perfectly. Thanks again, I promote your channel to all I know.

[@antontaylor4530]

If I were making a product like that, I'd want to hire someone like you to test it before I put it on the market. I'd call them a "beta tester". What a revolutionary idea, eh?

[@joen9275]

I love your videos and your commentary... Maybe one day soon I'll be able to put your videos to use building my own system... :)

[@AndyM...]

Looks a promising and capable unit, I like an inverter that doesn't have noisy fans going 24/7. Hopefully Version 2.0 will remedy interface issues !!!

[@landontesar3070]

Thanks, Will. Completely relevant effort and review.

[@bentleyjarrard885]

Apparently this is what happens when a bunch of engineers work from home designing a product but no one actually ever physically touches it or uses it themselves. OMG

[@offgridphilosophy7959]

To be fair, the annoying buttons are to get the ip68 waterproof rating. But yeah the software is a train wreck.

[@billnoname8093]

exactly, and that is happening across the board with everything from tools to materials in construction. That's probably why our cars are a lot more user friendly, everyone uses them.

[@Torbjorn.Lindgren]

@@offgridphilosophy7959 No, they could easily put a nice clicky button behind plastic which would still be IP68 rated but instead they went with the cheapest option. Waterproof buttons doesn't need to be bad, it's just the default.

[@KeithCarmichaelInFL]

Not everyone uses a car. Since most of those “engineers” are working from home, they are probably doing it from some beach in a foreign country. It’s too bad we can’t find better workers. If only they would stop quitting every time somebody tells them to come to work! 😂

[@offgridphilosophy7959]

@@Torbjorn.Lindgren Shirley your last name isn't rubber.

[@johnborton4522]

So grateful I recently found your channel. Hands down the absolute best solar channel. Amazing value. THANKS

[@parkerottoackley6325]

I've came to appreciate 🙏 your videos very much. Thank you Sir 👍

[@AlexandraNevermind]

Thanks again Will. Learning a lot from your videos.

[@offgridphilosophy7959]

In my case, the most I'll ever use is single phase 120 volts. I still find these larger systems interesting. Just don't forget the van dwellers, RVers and boaters please. We are always looking for upgrades. Thanks Will 👍

[@davidohara7669]

Amen!

[@lylekrannichfeld9634]

Agreed! I’d love to see a video updating the recommendations for a large rv system. Read the book today and it’s gotten pretty outdated at this point.

[@markseamans4682]

Heh, yup. My 46kw of Eve cells arrive in a few weeks. Need to get inverters on order so I can get it all installed in my RV.

[@jeffwhite3021]

Their parasitic draw is horrendous. They are only for people who are sun and battery rich.

[@VinceBadovinatz88]

I don't think I'm going to be able to do this I just bought a 6500 from sungold I should have did a lot more investigating it's only 110 output also. I'm just a beginner I built a pretty decent little 12 volt system but now I'm trying to go 48 volt. I already made mistakes. Not looking in enough videos and then purchasing things thinking that I took two weeks investigating I needed to take 2 months investigating. And watching more KZbin. Facebook stuff doesn't work they don't give you the right info. I love these videos from this young man he's so smart. Maybe I'll get lucky and he has a video of the inverter charger that I bought or one very similar. I don't even know how to hook it up

[@denisongolden8427]

Thank you Will. Your videos are what gave me the courage to begin my adventure into solar land. I already bought this unit but haven't hooked it up yet. If the runaway current on the battery connection is the same on mine, what Victron charge controller would you recommend for the fix? I have 3 EG4 48v.

[@SomeTechGuy666]

It is amazing how far all in one inverters have come. And they are still improving.

[@MarkSnop]

Happy Christmas to you! Thanks for always making cool videos.

[@bobcole3852]

Watched again to see if you had an updated review Like this unit , great for my application

[@RicoCantrell]

I was about to say, yes!! Awesome!! Then.... Well the video says everything.

[@richcaseaxon]

Thanks for the review, I just got an advertisement for this one and was waiting for your review. Sounds like we need to wait a bit longer....

[@cab1198]

Mr P. Thank you so much. I trust your judgment on the software. All I need to know. 💪⚒️🇺🇸

[@tjairicciardi9747]

hi will, suggestion to solve problem of unit shutting down while no solar input. Use some of the extra batteries you have on hand to simulate solar input while making menu changes

[@bobbyvee8941]

So much for DIY with this unit. Not ready for Prime Time!

[@unicornofthought]

yes, tactile buttons and switches!!! Agreed 100%

[@Vigo327]

Maybe not fun for you but situations like this are sort of best case scenario in terms of the value of your 'product' as a reviewer because it has the potential to avert a huge amount of frustration among your viewers, and beyond. By word of mouth, their combined reach is probably pretty massive and im sure yours and their influence on the entire population of first time buyers is notable. I think people who assemble or repair things for a living will just take this for what it is and wait for a positive update, but to have a cantankerous product like this end up in the hands of a true newbie runs the risk of derailing someone's entire interest in the subject. Impossible to assess stuff like this from an online spec sheet. Your work is very much appreciated!!

[@josephcormier5974]

Engineering is the bane of all industries excellent video great content six stars

[@martingargas3217]

If Will prowse had this many problems, I have no doubt that I would end up taking a sledgehammer to it and breaking it into a million pieces and frustration over trying to get it to work. I'm very happy with my EG 4 6500 EXs. 😊

[@Boatdog_Traveller]

Hi Will Thanks for all your great videos. I'm a marine electrician and I see a lot of DIY boaters mixing lead acid and lithium batteries in the same bank. I strongly don't recommend this dye to the different technologies. Please can you consider doing a video on this as I think these so called "Hybrid" systems are getting more and more popular in the boating community. Kind regards Del.

[@Le_Comte_de_Monte_Felin]

I appreciate all of your reviews. I wouldn't want to deal with the set up issues you experienced here which is a shame since the price makes it easier to start building a system where you could expand later (assuming these can be stacked).

[@CaptBill69]

I am looking at Sungoldpower's 6000 Watt TP6048 All In One unit which has battery less option, low frequency inverter, and can charge a 48v Battery Bank at 120 amps via grid or solar, 450vdc max PV; PLUS output 240vac Split Phase from just one unit. I would love seeing you review that option. Current price is attractive @ $1365

[@ronbown3836]

The only thing I don't like about this unit is the inrush current is not too good on this. I have it connected to my AC and as soon as the AC turns on it almost goes into a air mode or fault mode because of overload.

[@AllAroundTube50]

'schedule the AC Charging' is a game changer. I have a MPP Solar LV5048 and it works great, but being able to tell the inverter to only charge the battery during specific hours of the day would be key!

[@bricelarie6527]

Got an Mpp 7248 max ... I can set time for output source priority mode by one hour increments ... I can set time for charging source priority as well It's 48v batteries . 240v input and output ... 8000 w max solar array ... 2 mppt ... in/off grid hybrid that can't feedback the grid ... It's really a game changer to be able to set charging times as electricity rate are varying during the day there ( France ) . Thanks . Point stand I miss the ability to feedback the grid as it could help the neighborhood in case a failure the grid ... I know where to disconnect from the higher voltage and would have been able to use the wiring in case a real ... need . At least during the day ... Safety regulations rules won't ever think nor allows a true being ... before, after ... during ... Official safety concerns !!! Thanks From France with .

[@Smackvttv]

Dang will we’ll I’ve been watching for a while now and I’ve come to a conclusion.. you need to build your own all in one off grid system . With you being the head of design it would be the best set up

[@wilsonmining]

I got the 8KW model software was not as bad as the one you got, I did have to go through all the settings to get a proper function, unit is quiet and works great for grid-tie

[@molove2020]

amazing, the newer models for every brand get better and better. Does waterproof also mean humidity or cold/frost proof in colder climate?

[@Biggja22]

Been following them for a while good to see a review

[@banging2]

I've been seeing a trend in a range of products where software is key, it's all about software. And we can see that in many products.

[@norsk54472]

love the mobile testing rack, great idea

[@markronck3415]

Software engineering where the left hand and right hand can not shake hands. Glad you showed us the problems.

[@kingstinger]

Thanks for vid. Have you ever thought of doing a solar pontoon boat?

[@someOneYouKnow6506]

love your channel and content. one question I always had, why do you not address any AC-couple solar setups? They are much friendlier on the solar side of the installation, and with more standards coming out like frequency watt control they are quite adaptable for grid tie and grid down use cases. One candidate im interested in seeing a tear down of is Outback's Mojave inverter. I say all this having seen your channel for so long, and owning 2x LV2424 for like 6 years. Cheers

[@denisongolden8427]

I just read the manual and there are 12 pages dedicated to setting up all the preferences on your laptop using the supplied software disc. Gotta be better than the screen buttons.

[@CaptBill69]

I love the 240v split phase output option and up to 600 vdc PV inputs x 2 (... evolution of improvements). I wonder if connecting to grid at setup might help it calibrate the auto sensing 50 mhz vs 60 mhz ... into an possibly an easier set up? ... Could this be a great all in one ... after you dial it in over more time? ... Would love getting a second review after you test run this unit for a month, after you and/or manufacturer get it dialed in. Just some thoughts. ... Love your reviews. I am gonna watch DIYSolarForum chats about this model, in my learning more all the time mode ;+)

[@ElderlyIron]

Makes me happy I bought the Sol-ark 12K!

[@dmytromaruchok7225]

I have inverter with similar software. Unit called Axioma ISMPPT BFP 5600. Using it from July. In my case it even has LED lights around the screen. :) Had to switch them off, because it looks like permanent holidays in the shed where it installed.

[@SolarBuck]

I was excited about your last 2 videos as I am looking for a more cost effective solution for Grid Interactive than Sol-Ark that will also work with a large Nickel Iron Battery I just bought. These 2 units were high on my list of capabilities on paper but if you can't get it to function as it should I am not sure what hope I have. The third option I am looking at is the Schneider Conext XW PRO 6.8KW Hybrid Inverter/Charger | 48V 120/240V. Its a bit pricier and I am not sure if it supports sending power back to the grid. I have my Interconnect Agreement right now with Solaredge but I am trying to figure out the best way to AC Couple another inverter that will allow me to use a 48V 1200aH Nickel Iron Battery. My main goal is to make it through the night with import. I have already cut my electric bill in half my goal is to get it to 0 or as close as I can. Keep up the good work.

[@raven7068]

I was actually thinking about getting this unit. Thanks to this video, I won't. If you're having a hard time with that software, I have no chance, LOL.

[@totallyoffgrid3008]

So far the eco flow all in one is the best one I have seen yet.

[@edwynstapel3033]

Great video Will!!

[@Pendrige]

Since the cooling here is different i'd have liked to see a teardown like used to do in the past to show the differences to the LV6548.

[@WillProwse]

I actually filmed the tear down but never posted it because I figured no one would care considering the issues I had. Figured I could save my viewers some time. If they fix the software I'll do a full tear down

[@modernnomadtechnology9252]

While this device is beyond my current needs, generally, I'm willing to deal with programming difficulties if the product will eventually work properly. After all, programming is usually not altered often once accomplished. The uncontrolled DC charging output I find very concerning. At best, it might trip a BMS or a fuse. I don't like to think about the worst case scenario. But such an issue would render the device completely useless to me.

[@showme360]

Yep my Inverter Iconica Hybrid 5.5KW in the manaul states that the Solar has be turned off firsts followed by the battery and then the grid, and turn back on this the reverse.

[@rickharold7884]

Looks cool. Yeah software is everything. They need to simplify the user experience. That will open up more people to using it.

[@alexnicolas9135]

Currently switching to a Victron system but would love to try one of the all in ones

[@farside87]

Would like to see the insides of this unit to find out the waterproofing and heat dissipation they have added.

[@CaptBill69]

Remembering you had some issues configuring this All In One for off grid; ...I just got a confirmation of a hunch from Everyday Dave ... Clip hooking up same SunGold All In One. He said for some reason, this inverter wants grid power first, then it starts configuring as you turn on battery power next, and solar in. That was 28 mins into his clip about DIY Solar Panel System & SunGold Power Test. Could be this info. may be valuable for that SunGold unit.

[@kd7alt]

I believe the setting for dc charging from ac mains said 60 amp max that means you can pull 60 amps tomorrow the mains input to use for charging. Try turning it down to 20 amps. Should reduce the output to around 80 amps.

[@rudolfkasper6876]

You should have a look at the Deye Inverters. They are really nice and have a lot of insane features.

[@JGoodwin]

They need to make the controllers able to be configured in a computer, then transferred to the inverter as a data stream.

[@johnhufnagel]

They need to use a standard dot matrix screen and do a proper menu interface, with mechanical buttons. gimme a column of buttons (5 at least) on the left to pick menu options. HOME, ENTER, CANCEL, UP and DOWN along the bottom of the display.

[@bloodcarver913]

And with TCIP over standard CAT6, not the old RS232/USB crap. Also logging should be available onsite over normal TCPIP or wifi and not to cloud services.

[@Techa-lo2dc]

Most programmable controllers were done from software on a laptop only a few years ago... Not sure why we ended up with that not being the default option today

[@yarpenzigrin1893]

Yeah, I'm sure just building it on a Pi Zero 2W would have been so much better.

[@fauxque5057]

I control my LV6548 from the Watchpower app on my phone. That whole button pushing on the control panel is annoying.

[@mikem8676]

The 30a setting for max charge current is probably an ac value. I think my old Xantrex inverter does it the same way.

[@WillProwse]

That's why I posted the manual in the video so you can clearly see that it's not. It's the DC amperage rating

[@GavinStoneDIY]

The lv6548 has a restart setting. But a had I dead short one time on an outdoor receptacle and it wouldn’t reset. I had to cut solar and battery power to it for it to reset.

[@djaberlaib1046]

Looking forward to testing Huawei Sun2000 inverter, one of the best I try ever

[@BecomingOffgrid]

This is an exciting inverter, but I agree ... Software really matters. Maybe try using solar assistant to program it?

[@andys5203]

Hey, Will. Awesome video. Can you tell me if this has a zero export feature like solark. Thanks.

[@richardkennady9568]

Great job exposing the software bugs, any new updates to their software? This is a perfect fit for our project, but it's been put on deck......haha

[@JurassicJenkins]

Wow - another poc - I’m a noob and would just go ballistic with this. Can you recommend a grid tie inverter that is modern and well engineered that works?

[@orionfl79]

Just a thought based on some of the ATS switches and UPS systems I used to work with in a data center environment... But why can't these guys just slap in an ethernet port and give these things a web based interface? That'd make things so much easier to work with when configuring and monitoring.

[@MrGorpus]

Will, great information here as this unit is a candidate for a battery backup solution. Can you share what connection I would need for a whole-house solution and would I need to use a transfer switch. I'm assuming in UPS mode, I would not need a transfer switch?

[@johnhufnagel]

I like the trend of PV inputs going with higher voltages. It'll just be really interesting the first time someone barbecues themselves with it though. Since it's the holidays... chestnuts roasting, on an open fire... :smile:

[@Techa-lo2dc]

100 Volts is almost as lethal as 500 volts ... Not sure the bbq effect would be any different...

[@McRod-1]

The supercharging of software to allow more PV voltage input is just begging to be regulated.

[@Techa-lo2dc]

@@McRod-1 I believe everything over 50 volts DC is regulated round here.

[@lunatik9696]

Thx for informative video. At 1st glance, considering price and capability, I was very interested. After seeing this vid, The EG4 12K may be the best option. I doubt these companies even have software engineers. Most likely, they use the generic software from the component maker. If you have your equipment anywhere close to where you live or sleep, noise is a major issue. If you get frustrated easily, a good software menu is worth the money.

[@DingleFlop]

This seems like a really solid product. Has the software improved at all since this video was posted..?

[@xavierneckor8918]

Nice review as usual. So, the charging current control is broken? Can the inverter AC couple to grid-tied inverters?

[@howardsmith6294]

Thanx for what you do

[@EmergencySurvivalTips]

As a former software engineer, I agree!

[@mohmd_zhraw]

Man you are so great keep going with your good stuff, I wanted to ask you about this inverter, is it 24/7 can I run it as a UPS ? we love you from Iraq 🇮🇶

[@luke-thurston]

yep think i will pass on this one, and go for a Victron Multiplus II 5000 for the same-ish money. Thanks for the review.

[@offgridmgtowhomestead2520]

My buddy picked up 2 of these. Can't wait to see what it can do with 30kwhr of battery

[@TheSnowyWind]

I wonder if he has tried the AC coupling feature to get solar electricity during power outage？

[@harrycobbler9806]

I hate fan noise so I was very interested to see you show why it was so quiet but then you didn't show that. Can you do a tear down in another video and show how cooling works on it?

[@thatonebeone]

That shutting off was driving me crazy more then you 🤣😵‍💫 I was there I'd activate it with a hammer 🔨 🤣

[@johnmarcum06]

Just purchased one please keep the update

[@andrewp6562]

Thank you so much for this video.I would love to see the settings done from a computer for contrast. Regardless thank you.

[@Mr_Kruas]

Hi Will, I have the inverter with the same screen. Did you limit the Total Input current in 02 section (solar + utility)? Looks like you’ve limited the Utility current only w/o solar, thats why the unlimited current moved to the battery due to hight solar power at that moment. Could this be the reason?

[@anthonymatherene4224]

Hi Will,can you please do a video on Sungoldpower 18000W 48V split phase inverter and I would like your input on this lnverter

[@simon359]

I’m glad I’m not experimenting with my equipment, as I would be afraid of destroying my batteries with so many amps! I’m sure you have a video on how many amps should be going to your batteries safely?

[@koborkutya7338]

batteries should be fused from charging side that should protect them from excess amps

[@shenmisheshou7002]

I am interested in using export limiting so I can feed power directly from solar panels to my 240v Air Conditioner. My utility simply does not compensate me enough for exported energy and during the summer, my AC can run an hour at a time. What I would like to do is get a 240v DC system like the Growatt and tie the 240 output directly to the 240v junction for the AC, then put the current limiters upstream of the junction so that all of the current goes to the AC when it is running and nothing goes back to the house input panel when the AC is not running. Could you do a video on export limiting that would kind of show how I could do this?

[@shawnstangeland3011]

I just bought this inverter and going to use it as a grid tied with battery back up. Novice question My sub panel is fed by a 90 amp 240v. Am wondering if this is too much for the ac input for the inverter

[@jcs1492]

Hey Will, what is the standby consumption ? I hope its better than the Blue Power TP6048

[@ClearwaterKB]

1. Would this handle the jostling of being in an RV? 2. If yes, how would I step it down from 48v to 12v? Electrical stuff is just so confusing to me, but I can save your life as a nurse. Guess all my smarts are in the wrong place. lol

[@chrisparker9886]

Do a review of the Chargex inverter, and batteries! The inverter is 10KW and 210amp charger!

[@GregHassler]

If Will has this much trouble getting this setup there is a 0% chance anyone else will use this successfully.

[@danfitzpatrick4112]

Nice Review! Thanks

[@NoName-xr2su]

Hi Will, You have some terrific content. Do you have any MTBF (Meantime before failure) ratings for the equipment (inverters, automatic transfer switches, etc) that you are demonstrating? I am going to put together my own system based on my requirements (the all-in-one systems do not meet my requirements), and there are alot of moving parts (well electronic, that is). Being that many of the components are manufactured in China, are they reliable? That is, do I need to source spare component equipment incase of failure to ensure that I can get the same parts for drop in replacement? My main requirement is for home power outages (8KW, 120Vac, 60amp - 70amp max) Thanks, Steve

[@margueritemitchell1829]

Hello from British Columbia Canada 🇨🇦🖐👍♥️🛣🚐🚐🚐🚐💤⛷🏂☃️🐏❄🌨🌊

[@lenBrill1971]

I'm watching from Kelowna British Columbia 🇨🇦👍

[@WillProwse]

Oh awesome!!