NEW 2-SPEED ALL METAL SCALE CRAWLER | XS01 Unboxing

[@flatbedtrucker]

Lol that smile 😃as soon as the bubble wrap comes off thanks for the review nice kit 🖒

[@matthewbrothers2823]

Just take it slow, and take care to pay super close attention to detail. You can do this, I can tell you from experience theres a certain joy to watching something you built from the ground up come to life and run under its own power. Not sure what I'm looking forward to more seeing this run or seeing that look when you first see this build come to life! It for sure will be a fun ride.

[@WheelsD420]

Right on, great video. Diff box could be called the pumpkin. Can't wait to check out the rest of your videos

[@garrybaugher8617]

Looks like it's going to be a fun build. Can't wait to see the series of it.

[@CasperRc81]

Some times the pinion gear the drive shaft bolts to is slightly in too far into the ring gear. A lot times like on the axials when you mount and bolt the drive shaft it will pull the pinion gear away from the ring gear giving you a smoother mesh. Try putting a small Allen wrench in the hole of the pinion gear grub screw hole give it a small pull while rotating the axle seeing if that grinding/clicking goes away. Congrats on the new rig!

[@whendeathdeclareswar7458]

I have this 2 speed transmission coupled to a 550 brushed, best purchase I made since the RC crawler itself, but its a mission to put back together though after cleaning. Put some portals on them axles, they look great.

[@jaytucker1]

Very cool! Looking forward to your build videos and what color you decide to paint it too. I love scale builders guild. I have learned so much from watching their videos and ofcourse their sense of humor matches mine which makes them so much fun to watch! Keep up the great work!

[@RDsRCReviews]

Looks like wonderful quality but bummer there's no instructions. I have a cheap Toyota crawler I need to build that has no instructions and I've still not gotten around to it. Can't wait to see this Jeep finished. Have you ever built a Tamiya kit? They are fun old school kits and Tamiya's instructions are second to none! I just published a couple videos of out Tamiya Lunchbox van. The second one I follow it with my Autel EVO drone. They Tamiya kits are beautiful though they are not real high performance. You should check out my Lunchbox van video!

[@RCGirl]

I haven't done any tamiya kits but heard they're a must. I've been following some lunchbox van vids, that would be fun to build one of those. This kit ended up not being too hard to assemble, but I think it would be difficult as someone's first build.

[@RDsRCReviews]

@@RCGirl yeah, you should try the Lunchbox! It is fun and just stick with a brushed motor. I also have a Durga. I used to have a Hotshot 2 likely before you were born. Also and Astute and Stadium Blitzer. Kyosho are also really fun and better performance than Tamiya. Thanks for replying!

[@michaeljolley3390]

Haley, I love your new look. Love all your work, thank you for being you ! 😀

[@RCGirl]

Thanks! 🤙

[@edwardtomczyk1139]

Can’t wait to see it all together and how it runs !!!! Might look at getting one myself !! Cool 😎

[@Jeroen-Engelgeer]

Looks very nice and high guality. Work your magic on it.

[@RCGirl]

I'll do my best!

[@Hachman11]

Excited to see the build.

[@Waltkat]

Nice looking rig. I've been looking for another wheeler and may have just found it. Thanks for helping me spend my money! Lol.

[@richd5025]

Wish I saw this before getting a Raw Builders Kit. But, as usual I will end up replacing most of the stock parts with upgrade parts. Already ordered two KYX axles. I might get this 2spd transmission.

[@PatsRC]

The hobbywing axe system is amazing.. I had a go on my friends scx10 last weekend with the AXE system .. looking forward to following this build.. please keep up the amazing work you do 👌👍

[@RCGirl]

Aw thanks! Yeah this is my first Hobbywing setup, have heard great things about it. 👌

[@PatsRC]

@@RCGirl no problem. You won't be disappointed with the hobbywing.. it will definitely be my next upgrade for my TRX4. 😊

[@RCGirl]

@@PatsRC You still running the stock traxxas motor/esc? I have been, but I'm getting spoiled now that i've tried sensored setups.

[@fdjkvc]

These reviews are part of the reason I have my card number memorized now...

[@knigh_hawk_733]

Always great to what on your bench looks like it will be a nice rig

[@nobodynoone3428]

Nice looking kit. I'm excited to see it painted. Great vid as always.

[@RCGirl]

Paints arrive tomorrow, looking forward to sharing part2

[@gwpattrick]

Look forward to this build.

[@EpicSwedishFika]

RC-cars and guitars... That is all you need! ;)

[@magia5035]

Been on business travel. Home in a week. Yeah RC TIME. Hope to see a video soon.

[@Apcrawler]

Nice 👍 kit, your going to love the control with that motor and ESC. Matt on SBG is definitely a great one to get tips and info from. Look forward to seeing this build 😀

[@scotfirehamer4247]

I’m excited for you on this one😄 Looks like a fun build 🤙🏼

[@RCGirl]

Thank you!!

[@BrothrBob]

I look forward to the painting procedure~!

[@justinchilds1593]

Awesome! Looks like a nice rig. Love the strat in the background! I'm a guitar player too!

[@rcnoypi8758]

I'm drooling my friend:) I want one! Can't wait to see your finished build! Good job beauty...

[@rcnoypi8758]

Hahaha I love your reaction when you remove the plastic from the chasis:) like you open a box full of shoes...peace! I watch this vid twice though...I love unboxing stuff:)

[@NCmountainsYouTubeChannel]

ABW 77 22 . Can't wait. To see👀.. a really dark blue to a purple. With some hot pink . Would go good on the black top. And running gears . NC MOUNTAINS ❤👍✔!

[@fozzysrchobbies1343]

Nice review looks like a pretty sick truck cant wait to see the finished product

[@victoryyodel]

Awesome kit👍 I just realized I need an all metal crawler now:)

[@jspeedrc]

Very good channel 👍🏼👍🏼From France 🇫🇷 👍🏼😉

[@RCPlayGround]

Nice XS01 unboxing video I have too ;-D

[@RCGirl]

Awesome! I watched yours before I got this one

[@stevenf0]

That looks like some nice quality. Rc Mart you said? This might be a great starting point for people looking to build custom trail trucks

[@Sticker-Happy]

Oh cool! This kit looks fun, i did see the Pro MT build with the sensored setup and it inspired me to rebuild my old savage xs. The Scale crawler market is getting better isn't it? so many different companies offering these platforms now :)

[@RCGirl]

That's awesome! Yeah lots of cool new crawler kits out

[@cosmohunter1990]

I love your videos, I am catching up on your videos! Great Work!

[@crawlingri]

Looks nice! Hopefully it performs well!

[@RCGirl]

Yeah same. People were commenting about how high the positioning of the gearbox is. We'll see if that impacts the performance...

[@peterrcbasher]

Cool video!

[@RCOverKill]

Very cool! Looks to be very high quality, probably close to 1500.00 all in I would guess. I haven't messed with ground vehicles since my traxxs nitro truck. Yea I know, showing my age, lol That would be a lot of fun with fpv, and a head tracker, of course I think everything should be fpv. I mostly fly race/freestyle 5in. quads, but anything rc is a blast.. Can't wait for part 2!

[@jeffvanlue4872]

What a smile !! Good stuff

[@bigchungus-oj8zz]

Very nice kit, Fully upgraded. XTRA SPEED Home Run, on the bench. Looking forward to trail/crawling abilities. Thanks for sharing. BTW, are you going to shred for us, or is the guitar a prop...

[@johnnyyakoobian9888]

Seems like a nice kit.maybe a running video soon.looks like good quality

[@RCGirl]

Yeah I'm working on the electronics install, then body painting, then ready for the trails

[@johnnyyakoobian9888]

I run all hobbywing in all my rc there super reliable.enjoy the build great seeing you in the ro k crawling aspect of rc👍💓

[@HarleyRocker]

i have just gotten this same body, its going on my scx10 II. do you have a video of how you put this body together, it looks like it takes screws, but my body didnt come with any screws or instructions for assembly. love you video , very helpful and you make it fun

[@RCGirl]

I didn't do an assembly vid but I'm sure there has to be one out there... I did do a "how to" for painting it though, with some assembly kzbin.info/www/bejne/ZpDdpWiXfMqWiLM

[@davidmussack4529]

Nice. I want to see how that Jeep body comes out. I’ve been considering one for my SCX10 ii.

[@kevinj5293]

Good video like your hair tied back 🤗 👍 you will have to play a jimi hendrix song on that strat. 🎸

[@awe_rc8380]

Great job🙏🏻🤜🤛 fun to see the project done👌

[@agoodballet]

I might have to get one now. I’ve been using a few Xtra speed parts on my builds and they seem pretty high quality so I’m sure this kit is just a “complete” version of alllll the parts lol.

[@RCGirl]

It kind of is!

[@agoodballet]

That’s awesome because I really like their parts so this “kit” would be a great buy for me. Thanks for the review. 💪

[@RC1oNeTV]

What a great review my friend~~!👍😊👍

[@RCGirl]

thanks!

[@richd5025]

I would send the body out to get hydrodipped, maybe tie dye colors!😄✌

[@robbrcnstuff4220]

That's an awesome kit

[@павелскляров-ъ7и]

Super! Good luck.

[@timjohnson9406]

It's very cool watching a beautiful rc girl get excited about a new scale truck!!! 😁 it is sweet too.

[@fabianrengelink2662]

It looks Nice, you tooooo! 😍 What about painting the body orange! 🇳🇱🌞

[@Tanks4Tots1]

Could you please open up the trans and axel so we can see the inside? I would like to know if it is all metal geared? Bushings or bearings? Sintered or pot metal gears in the axels? Adequate grease/thread lock?

[@RCGirl]

Good points, I will try and cover that in my next vid

[@skirmich]

I wonder how the bulky FOC sensor of the AXE will fit inside the metal faux engine shroud….

[@RCGirl]

Yeah some cutting was needed, but I found a good workaround that looks decent (i think!)

[@ozboy8144]

look like a very nice kit.👍

[@trudybergen3510]

Do you have to buy the motor speperat.

[@davidturner2365]

Great vid !

[@SanDiegoUteFan]

Nice looking kit! Hayley, did you really just say “shifty doohickey?” LOL I like the librarian getup. Only thing missing is the cat eye glasses on a chain. Seriously, keep up the good work. PS..... Need MOAR airplanes.

[@jahmenrcbuildingasone4254]

You mentioned servos. So my suggestion would Triple 5 REEFS RC. The most smooth and powerful servo out there (my opinion) not to mention it would totally match this rig because its black. Looking forqard to the build.✌✌👍👍

[@davidarnold2427]

I have the same body(love it) in red. I painted mine with rust oleum (bonds to plastic) works great and a lot cheaper

[@operation11charlieinc]

Looks good good video,

[@joweemac]

OMG :) Just when i said i was going to spend less money on RC stuff. haha i love this kit. Back down the rabbit hole....

[@RCGirl]

haha sorry!! yeah i'm liking this kit. Makes the plastic chassis rigs look like toys haha

[@scalebuildersguild]

Where's the link to the SBG?! ;) Enjoy the forums!

[@RCGirl]

Ahhh i'm the worst!! I'll fix that ASAP. ;)

[@RCGirl]

DONE! ;)

[@rw2king]

Great vid that thing looks killer. Have you had a chance to bash the bomber yet?

[@RTmadnesstoo]

Didn't she say the servo broke so she needs a couple? Pay attention

[@rw2king]

@@RTmadnesstoo Thanks your so smart

[@RTmadnesstoo]

@@rw2king I didn't mean to sound snarky but lots of times people don't like to repeat themselves and just don't answer the question.

[@rw2king]

@@RTmadnesstoo She said she took the servo for that build to put in the bomber. Now she needs 2 servos for this current build. Pay attention

[@RTmadnesstoo]

@@rw2king She said she has a servo for shifter since it is not essential and is looking for two steering servos that will need to be premium models. 'That build' has no servos.

[@lacos1795]

Super sick🤘

[@herfinnthomassen8453]

I painted mine yellow, red is realy nice but there is alot of red ones out there, maby you should paint it pink 😀

[@denniskok6506]

im new to this hobby and i was thinking of getting a nice servo for my trx4 defender. i have upgrade the motor and esc to the combo pack of Hobbywing Axe r2 550 3300kv. Im looking at a servo to best match it. Would the Savoc SB2292-SG black edition be a good fit? I know i dont use it up to its real potential but i like it because it may match the hobby wing looks nicely. Will it fit my car? is it a good choice?

[@rcwolfhobbyclub5217]

Great video✌

[@LRCR]

That is a really sweet kit with all the metal.. and those axles look absolutely perfect with the skidplates.. Great Video Unbox.. ✌️😎👍 HFLPRCing

[@LRCR]

I was also wondering if you do Sticker Trades? Would like to put your Channel Sticker on the Family Channel Board.. Thanks Sister 😎👍👍

[@Firewlkre]

Wow thats beauty!Always had good durability and function with xtra speed upgrade parts, should be a good one.Is the drag on the hobbywing switchable on the fly like the castle mamba x?Also wondering final drive ratio's on that 2 speed couldn"t find it on rc mart website.thx for sharing.

[@Firewlkre]

i meant "drag brake".

[@RCGirl]

Haven't checked the drag brake options yet, I'll make sure to mention that in my next vid. The gear ratio is similar to the trx-4 - I asked them that same question haha! 1:1 and 2:1

[@hoerejong1234567890]

Paint it in the colour of your shirt-top-thingy. Then it’ll look really surfin’ usa 🎶 😎

[@mrDarksand]

Hey RC Girl,, did you find out any smaller pinion gears for that gearbox, and so yes, could you give me some specs or a link where to buy? I got this gearbox, but in first gear my car is a littlebit to fast and there is minor kogging on really slow speeds. I tried a bigger motor (3660), but that was too crazy and i broke the pin inside the last gear. Now running the F540 V2 which feels perfect. Thank you!

[@diytypeofguy6502]

U look excited 😊

[@jeffreybozeman6245]

“Shifty Doohickey”... Riiiiiiight😬

[@RCGirl]

Also known as... the shift mechanism? :)

[@matthewneufer1758]

Did I see a trailer hitch?

[@nemopettersson1239]

You are the coolest girl i know off!

[@RCGirl]

haha thanks!

[@mdriyasatali]

Nice

[@CR4ZYxRY4N]

I want one with a inline 4 cylinder fs l400 engine

[@BALAZSER1]

Do you know if the TRX 4 sport is just a different body, or is it a whole new truck?

[@RCGirl]

It doesn't have diff lockers or 2-speed so it's a different truck

[@BALAZSER1]

@@RCGirl Ok thanks, never had a crawler, just trying to find a good one😁 Thank you for responding, you have a awesome channel, I subscribed a few days ago🙂

[@RCGirl]

@@BALAZSER1 I'm sure you'd be really happy with the sport

[@BALAZSER1]

RC Girl Your probably right, but if I'm going to do it, I might as well do it right🙂 I'm spoiled too, I want to get one with a 2 speed, and lockers👍👍

[@RCGirl]

@@BALAZSER1 dont blame you!

[@rcr0ck]

Lucky lucky girl. You know you're going to have to pain stakenly cut out the bonnet so that it opens to show off that engine aye?😋 Done that with my Cherokee, took about 3 hours with a hobby knife

[@RCGirl]

Dang I guess you're right!

[@rcr0ck]

@@RCGirl I sent you a pic through FB messenger 👍

[@robertosamson1951]

Hi how much extra speed xs01

[@sammygonzalez7627]

If your significant other likes too get his dirty with cars, the two of you are a match made in Heavan

[@STEVOD313]

These types of kits should be called semi-kits cus guys like myself buy kits to get the experience from building everything not just putting together the easy parts, I wanna learn about the rig from assembling everything

[@RCGirl]

True!! Or "cheater kits" haha

[@akrider174]

how is rcmart shipping in the USA?

[@RCGirl]

Its been a while, but if I remember correctly, I think it took me like a week to get my trx4?

[@Kyle_v2]

I guess imma sub cause youtube keeps reccomending this channel to me

[@gwizzfpv6741]

nice too see women in the hobby nice smile too

[@magia5035]

Is that you rc girl on the guitar 🎸 ? If not would you play a song? I'am getting a new rigg this up coming sun up day. ⛱ When I do I will make a video 📷 . NICE ESC. SUCH NICE PARTS. I LIKE YOUR SMILE IT IS THE BEST PART OF THE VIDEO.

[@RCGirl]

thanks! Yes that is my guitar. :)

[@magia5035]

@@RCGirl You have no idea how much I smile when you write back. "WOW 😮 "". Thank you. I really hope you have an amazing day because you just made mine. ✨ ✨ ✨ ✨ Shhhh not on break gotta go.

[@RCGirl]

@@magia5035 haha thanks, yes you too have a great day. I have a 3 day weekend starting tomorrow! Woohoo!!!

[@magia5035]

@@RCGirl Odylle heesakkers. Are super beautiful. Also you are so lucky 3 day weekend. By the way I would fly, rent a car just to take you for coffee ☕️. ANYTIME.

[@RocketDogRc]

What happened to your thumb nail? You might want to check out the Holmes hobbies 139.00 servo. Svh 500v2. This servo is a beast at 500in oz. Of torque. With no bec required. Or reefs triple 555. This servo you will need a bed circuit.

[@visualfilms8790]

in love..

[@charliekline3975]

Rc Girl For the price of these kits they should give you everything.

[@AdamTerlaje]

Worst part of my build was screwing in tow hook bolts🤪

[@atvdonnie]

Don't dally, need more...

[@rpmwithabdullah3473]

😍

[@billcox87]

great video rc girl;) check out reef's rc triple5 servo's, freakin awesome!!! the strongest most durable servo I've ever used, way over 500oz of torque! I've killed MANY servo's in my Bomber and since putting in the reef's last summer, it is still going strong.

[@Toyie]

I prefer it 100% assembly kit. I don't like it when they assemble it for you. Like Tamiya and Kyosho

[@slappdaddy8]

You know your sh@*! Fun video - Also, I learned about your channel from your GIRLS ROCK video with Mo Awesome!

[@RCGirl]

Ha!! That's awesome, it was fun riding with them 🤙

[@allyoucando8486]

i have my HPI Crawler King i will never put brushless, i want my transmission to live more brushed, my is using 45t 540, for me is capable, with brushless the transmission will not survive to much will have short live, even kevin talbot use brushless and the transmission of the trx4 can't withstand that power. i now why i'm saying

[@masterchief586]

Nice video doll, and gorgeous too...the perfect woman. Have fun youbg lady.

[@RTmadnesstoo]

I hope you like that AXE. I didn't. You could have it

[@SnarkyRC]

Send it

[@stpbasss3773]

Yeah your going to give away a 250$ system lmao

[@RTmadnesstoo]

@@stpbasss3773 what have you got to trade?

[@stpbasss3773]

@@RTmadnesstoo I don't want the axe system I don't use brushless in my crawlers and I wouldn't trade anything for a 250$ brushed system when I can go get a castle motor and ESC for 150$, that axe system is insanely overpriced.

[@stpbasss3773]

@@RTmadnesstoo sell it on eBay you will get 200$ easy and fast, I have sold a lot of RC stuff on eBay it's super easy. People do trade's on eBay too.

[@toddbertram6556]

Nooooo, not another Rubicon, ha

[@warwickproud7746]

you are so good lovely smile super stoked