NEW! 2018 Daiwa Ballistic LT Inside out analysis: Going over all the internals and features

NEW! 2018 Daiwa Ballistic LT Inside out analysis: Going over all the internals and features
All the new LT Reels Some crazy prices!
Daiwa Ballistic LT amzn.to/2C552Hz
Daiwa Tatula LT amzn.to/2ChXn5i
Daiwa Fuego LT amzn.to/2BOaeey almost 25% off
Daiwa Exceler LT amzn.to/2E7FgzK
Daiwa Legalis LT amzn.to/2DrLadE

[@Tallnerdyguy]

Is the sealing better than the Vanford? While i am not near salt water, i am near all the sand.

[@kimehunt4501]

I don't own this reel nor do I ever plan to, but I still found this fascinating.

[@JD-hs7ib]

TA is an Evil Genius. He makes me but gear I can't afford LOL

[@randybanta7466]

I have 2 4000 EX, weight is 13.9 oz, (great reels). To compare, the 4000 LT is 7.9 OZ. Huge difference in weight. Great overview.

[@martingarrett3155]

I would love to see you Super Tune a Ballistic LT, replacing all the bushing with bearings . The fisherman's hot rod

[@S1avk0]

If you had to choose personally, for fishing for big fish from the beach (stripers, snook, decent [100lb] tarpon) would you pick a Saragosa or Ballistic (or other in the same price range)? I really like the idea of a lighter reel for casting lures all day long with the Ballistic, but have heard many good things about the saragosa.

[@cofeshop77]

So, which better one daiwa Tatula LT or Ballistic 2018 ??

[@gregred78]

I'd like to see you take a clutch apart and see if you can get it back assembled in a video one of these days!

[@TackleAdvisors]

I put out one with the shimano super stopper....actually thought of your comment when filming it..lol

[@gonimysh]

How is it after 2 years of used compared with Stradic Fl or Sustain Fi or any other Shimano over 200 $? Does it loose quickly it's performance in time?

[@Noojtxeeg]

Hey, are you curious in looking into some new reels? I have a couple new reels that haven't touched the water yet, I wouldn't mind having you look at.

[@MrLucoca4]

If you were in the market for a baitcaster in the $150 to $200 range what reel would you choose? Or is there a cheaper reel that is built the same? Thanks for your help

[@yl3064]

You are giving me hard time to choose the right reel for next summer. Im in Canada. fishing Walleye and trolling for Lake trout . Daiwa Ballistic or Shimano FL or a used Daiwa Certate for $200, but I don’t know is story . looking for a 4000 size .

[@wuquanchi]

A dumb question here, about gear ratio and main gear size: Is this the correct logic, as the main gear diameter is getting smaller the torque/cranking power is increasing? another saying, bigger gear means a higher ratio? Thank you, TA.

[@drewhurst383]

For a mix of jetty, surf, and pier fishing would you recommend the Stradic FL 5000 or Ballistic LT 5000?

[@Machster10]

Neither. These are not surf reels. The salt and sand will penetrate and destroy them. Get a Penn slammer 3 or 4.

[@piaoliang5467]

how was the resistance? I owned the original Ballistic and sold it. because it had too much drag, compared to Stradic or Caldia ot Theory.

[@BassManStrikes]

So the big difference between the Fuego lt is the aluminum main gear? It looks almost identical to the fuego.

[@christiangirard6634]

Just out of curiosity could you possibly do a video for the fisherman who do saltwater fishing and want a real that has good sealing but is also in a 1000 size and possibly do a comparison on what you think are the best reels or give a suggestion on what you think is the best real you do great work keep it up 👍🏼

[@shawnturner8269]

Love your videos can you please review Florida fishing products. The Ospreys a common reel that I would love to see you break down thank you for all the hard work and videos

[@dennispenton6872]

Ok probably a dumb question, but if I wanted to replace the drag washers on the Ballistic LT 5000 with carbon ones, where would I start? I know you said it was an easy upgrade, but I've never done it...

[@yogabhaskarafishing3762]

Thats ballistic lt japan gear is made from zinc, right? And ballistic lt global gear is made from alumunium cnc. And the price is much higher than balistic lt japan. Im confused, correct me if i wrong :)

[@dobrinyanakiev1386]

Hi, nothing was mentioned about the lack of bearing in the line roller. Is this a problem and can it be upgraded with one? Rgrds!

[@cword8247]

Great vid. Which is smoother, the Sustain Fi or the Ballistic lt?

[@TackleAdvisors]

About even....you really don't feel the gears in either...but I've seen poor examples from both reels....some smoother than others. NOthings ever 100% consistent anymore it seems

[@dennispenton6872]

Love your vids. Very informative! Do you have a preference between the Ballistic LT 5000 and the Saltist Back Bay 4000? It'll be used inshore / backcountry for speckled trout, reds, snook, etc.

[@johnarnett5201]

I have a back Bay 4000, absolutely awesome reel!!

[@luke_streamwalker_]

Great video! But I've not understand if the handle knob is replaceable (screw inside) or not!

[@greatorangesky]

I just did a tear down of my Ballistic Ex2500 to replace where the ocelation gear was pulled from it's support. The screw retaining it had stripped and broke material from the housing. Fun reel to rebuild, The ocelation gear in the ballistic is metal to note.

[@greatorangesky]

Having a ci43000hg and three ballistic ex... I just ordered 2 of the LT 2500xg and cannot wait!

[@carlofishingchannel1656]

just want to know whether this reel can be use for heavy fishing like fast jigging?

[@GMOTWFishing]

I know a few other people asked... from an unbiased hardware perspective which would you take? Ballstic LT or Ci4+? Also great stuff and subbed!

[@ryan.adhisa8199]

I’d say if you don’t find the magseal to be a headache go for ballistic. The “coreprotect” of the shimano IS NOT seal by any means, it just a labyrinth to make water intrusion harder. Anyway both reel is not sealed in the body at all...

[@emiliopaolo610]

Tackle advisors i propose: Daiwa tatula lt vs stradic ci4+fb. Which one should i get for light saltwater applications (spinning with max 25 grams lures)?

[@Mastr-Tech]

Can you make a video on overhauling an old Shimano ar cluch?

[@nawinchester]

Do you do reel service for your subscribers? Just curious if we can send you reels for maintenance, component upgrades and the like? Thanks, Nick

[@joaofranciscosantos504]

Hi, great technical videos. Not usual to see this type of detailed analisis. Congrats for that. Saying that, for saltwater spinning exposed to somes splashes and rain do you recomend the magseal in this model or the protection in the Shimano Sustain? I'm not sure which one to buy...

[@25_64-_]

what material is the ballistic drag washers made of? do you agree with its drag system?

[@Takis_Koll]

You doing great job mate. Something that was missing from the fishing world... Now we all can see what we are about to buy, congrats! I do have a question, what would be your recommendation for a 3000 (Shimano size) reel for saltwater medium spinning(sea bass, barracuda etc) . Maximum fish weight will be not more than 5kg. Daiwa? Shimano? And which model?

[@TackleAdvisors]

Thanks brotha, appreciate it! The stradic is pretty damn good for the money and if the capacity works the saltist back bay is great.

[@Takis_Koll]

@@TackleAdvisors Thanks for the answer. I was looking into CI4 Stradic, you think it worth the extra buck?

[@allengallion930]

In your opinion would the larger size Ballistic LT's (5K & 6K) be worthy/sutible of fishing semi heavy Inshore fish (Bull Reds, big Snook, medium Tarpon) on a regular basis?

[@carlknaub8666]

I catch snook jack juvenile tarpon on a Ballistic 2500. Great little reel like it better than the new sustain. Incredibly smooth. Hope that helps.

[@John_D2]

get the Daiwa BG for that. I had a ballistic ex 4000 I used for jetty fishing it didn't last long. basically jacks tore it up.

[@InfinityFishing]

TA i know you're so busy , but there is an ongoing debate and confusion in our country about stella fj 2018 vs daiwa exist lt 2018 , do you have any time frame for a comparison video? Really appreciate your answer , will tell my fellow anglers who're preparing for new season ..

[@2010Dillinger]

Can you make a video how to break it down? I tried to take the main gear out , but it seem stuck. Could u please help me? I try to grease all the gears n add magsealed oil on mines. Thank you!

[@TackleAdvisors]

Pulling the main gear is a pain in the ass......I'm still not sure what allows it to come out cleanly. I assume you removed the clip on the right side above the bearing.......But it seems you have to remove the pinion and the lower pinion support bearing along with everything at that location. To gently finagle the main shaft out. Don't yank on the main gear because the teeth that run the oscillation gear will damage things if you get too aggressive with it. It's tricky......But I found with the pinion out some gentle wigglling will get the shaft out without bending anything

[@matthdz6369]

Cool stuff im looking on buying another reel to add to my light tackle inshore stuff 2500 to 3000 sized reels currently have the previous gen Sedona and like how it casts it seems to throw line really smooth better than my heavy penn battle 2, anyways wanting something light and durable, minimal flex to reel in those redfish, since i use artificial and cast back to back all day long. Been eyeballing the daiwa exceler lt 2500 and the nasci 2500 stuck between those two even maybe the stradic I'll consider. If the daiwa casts like a shimano im game for it. What do think is best?

[@aaronbasillote3504]

Does the ballistic also have the LINEAR SHAFT found on the theory?

[@aaronmaguire9825]

Wow! I just discovered the Daiwa "Prorex". I have never-ever seen it before and it looks amazing! What do you know about the "PROREX"?? As far as I can tell...it looks like a twin of the "Ballistic"...only purple.

[@TackleAdvisors]

YEah... that sounds pretty accurate....I think the caldia lt is athe ballistic and tatula lt as they have magsealed and no variants.

[@broonch33llo62]

prorex is fresh water stuff. no mag seal

[@MichaelIglewski]

I have a Ballistic EX 4000H and have had to replace it after one trip due to the bail mechanism failing.. I called and Diawa sent me out a brand new reel.. Having some faith in the Diawa name I was hoping this issue was a fluke and purchased an extra spool for the replacement reel..Guess what..Two trip later and the bail is not closing once again... At this point I am abit upset.. What can you tell me about the comparison between the old model and the new one and why do you think this keeps happening to me with this particular reel and not any of my others... Do you like the old model better?? Wld you, ask for an upgrade to the new model or stick with the old old heavier model for durability.. Well so i thought?? Your opinion and anything else you can tell me...

[@TackleAdvisors]

Once I get a friend's saragosa back to him I'm gonna grab his 2500 ex and compare it to the LT. Overall they have a very different feel and regarding the bail trip that feels different as well. But I haven't seen what makes up the old trip mech that could be causing the issue.

[@MichaelIglewski]

Its a shame.. Originally bought it for a NY salmon trip.. 2 day trip and it broke...Got the new one and literally hvnt used it 3 times and it happened again... Thanks for the reply...If you think of me once you look at the 2500EX, shoot me another comment and tell me what you find.. Diawa tried to give me the ol.."Ya gotta clean ur reel" spiel... lol

[@jlee276583]

Would you get a Ballistic LT 6000 or a Saragosa SW 6000 for large Snook, Bull Reds and small to medium Tarpon fishing?? Would be 100% saltwater fishing. Would be on a 15-30lb Phenix Bermuda spinning rod??

[@TackleAdvisors]

The Gosa is a tank. And a proven one at that. I haven't seen the 6k ballistic so i don't know how it compares size wise. But I had a few of the GOSA sw's and old gosas. And until the slammer 3 proves itself. It's the best reel in it's class if you need a tank reel

[@TackleAdvisors]

I did a tear down back in 2013 when it came out. Coordinated with alan hawk so we didn't cover the same reel which is why he did the spheros www.stripersonline.com/surftalk/topic/553872-inside-the-new-saragosa-10000-swway-too-many-pictures/?page=4

[@Julianuribe23]

Thinking of getting either a Saragossa 6k or a Slammer III 5500 for surf/jetty/bridge fishing for snook, reds and tarpon. Gonna match it with a 9' or 10' Star VPR surf. Which reel is a better buy?

[@TackleAdvisors]

Isn't the slammer 5500 in the size class of the gosa 8 and 10000? Gosa has been proven to be a tank. Slammer not so much. The one i have here had a chewed o ring. And the drag seal is kinda shredded. Plus the pinion chewed up the finish on th eframe. Some guys have really enjoyed them. But I've also read many complaining of tightness and poor line lay. So I'd go gosa until the slammer gets more feedback.

[@TackleAdvisors]

I'll also add...The slammer beats the gosa hands down on paper 8 days a week....I'm willing to bet if you get a perfect reel it would too. Just throwing that out there.

[@kratimamnurpujinegara710]

Apakah daiwa Ballistic MQ bagian gearnya juga seperti ini?

[@luiszunzunegui7463]

Great and detailed review! Thanks :) Wondered if you could solve a small doubt I have been pondering for a while... I just bought a Shimano Dialuna 806ML to target seabass. They recomend a 4000 size real (particularly the Shimano Excense 4000). I dont want to spend 500$ on a reel :P so I was looking at the ballistic as an alternative. My doubt is... should I stay with a 4000 or go down to a 3000 to have an ultralight but powerful setup? On the other hand, is the 3000 ballistic just going be too small for seabass from the rocks? Would Really appreciate your expert opinion on this one. Thanks!!

[@dennispenton6872]

TA!!! You're the man! Hey I bought Ballistic LT 5000D-C that I discovered had bad line lay. Not even the included spacers would correct it. So off to Daiwa it went. Their work order shows they replaced a bearing (120741). Though I have not let out enough line to test if they fixed the problem, I do notice a little play on the main shaft, and it's bothering me as it makes the reel feel loose. Granted I did not do a before-and-after comparison, but it still feels strange. Maybe it's me being paranoid, but is this normal? Anything I could check? To be honest I do not want to send it to Daiwa again. Any Daiwa experts you can recommend to look it over?

[@mofishing1976]

Have you gotten a chance to take apart the Back Bay LT? Would be nice to get your thoughts on that vs the Ballistic LT...

[@TackleAdvisors]

Just did the 4k the other day and did the 3k last March. Wonderful reels albeit shallow spool capacity

[@swimbaitingohio2777]

I know its not the subject of the video but I'm planing on buying a tranx 300 and I was wondering how often you service your tranx also this is in fresh water only. Oh and I subscribed

[@TackleAdvisors]

For FW...you should be able to get a season out of one. With the exception of cleaning the bearings every now and then.

[@stavroseconomopoulos4180]

Has anyone noticed the gear ratios to be slightly lower than other models? Is going to make a big difference when fishing inshore?

[@nickatdallas]

My drag system on daiwa tatula lt jams on me, what’s the problem do you think could be? Thanks

[@trextrextrex]

OK you have me convinced it's either the Tatula LT or the Ballistic. 2500 size I think. Seems pricing may be where I can get the Ballistic at about the same price. Gear ratio is lower on the ballistic

[@outdoors-fun]

Great Video man!! Does the Tatula have the seals on the handle, roller bearing, and main shaft as well?

[@earonsotto9908]

Since the Tatula LT and Ballistic LT share many of the same parts, would it be possible to swap some parts over from the Ballistic LT into the Tatula LT to make it magsealed? Tatula LT and Ballistic LT magsealed franken-reel?

[@TackleAdvisors]

LOL...I'd be willing to bet It could be done. As long as they're the same size

[@eliasaamot573]

Woah a reel tear down under 40min. I never thought I would see the day. Love the videos and how thorough you are.

[@Jedhaase]

Daiwa is my favorite when it comes to spinning reels. It would be nice though if they used a varispeed worm oscillation gear for better line control and casting. Only thing I like better with shimano.

[@derd1603]

Hi, am looking for a 1000 size spinning for my light travel rod, could help to recommend a model from Daiwa or Shimano? Thanks!

[@TackleAdvisors]

I like the tatula for the ultralights. I use the 2000 instead of the 1000...still crazy light...Haven't used the vanford yet though

[@preiudeh22a]

I want to order this but does it have the minebea bearings like the BG?

[@edgarchavez4714]

I have Daiwa ballistic 2500 and my Anti reverse works but it slips when I want to hook a fish not all the time but it’s a pain in the ass when I’m in the water is the anti reverse clutch not working or what eles can it be?

[@TackleAdvisors]

Ive experienced that with a few different Daiwa spinners... Not the 3 ballistics I have.. But others

[@ronkauffman9058]

I'm looking for a good 1000 size reel. I've tried the fuego and tatula. I love the feel of the tatula but can't find a ballistic anywhere to try. What are your thoughts between the ballistic and tatula. Which would you suggest?

[@TackleAdvisors]

You won't notice a difference in feel between tat and ballistic... If anything tatula will feel nicer due to lack of seal resistance. Stradic FL would be my suggestion other than that in the range $

[@ronkauffman9058]

@@TackleAdvisors thanks for your response. I have quite a few shimano reels, the last one I bought was a sahara 1000 and as little as I've used it it's just not a nice feeling reel to me. I know it's a lower end model but I own an exceler and love it and how smooth and precise it feels. This go around I'm gonna go for a higher end daiwa. I originally planned on the stradic but the feel of the tatula to me is nicer. I like the cosmetics of the stradic better but smoothness means more.

[@swimbaitingohio2777]

What grease do you use/recommend sorry for any boring questions I'm 14 buying my first bait casting/swim bait reel

[@TackleAdvisors]

+Swimbaiting Ohio no boring questions lol. I have tons of faith in corrosion x grease. But recently have been really limited how aqua shield has been working.

[@danielbeavers8701]

HEY MAN!!!!!!!! were is the best place to get upgrade parts for reels?. Also what is the best oil and greases to use for reels?

[@beegee3136]

Superlube grease and Tsi321 oil are my picks.

[@danielbeavers8701]

Are okhuma good reels?

[@marw3709]

Do you know if the oscillation gear is every time out of plastic?

[@amifishing]

Hey, I know it is an old video, but I am desparate, I had some salt water intrusion in my ballistic lt 6000d and the magseal disk cap looks different and it is 2 pieces, metal plate and the magnet. Now I can't center it, are these glued normally? Thanks!

[@TackleAdvisors]

Strange yours is the 3 holed centering plate and a separate magnet? Can you email me a picture @ [e-mail]

[@amifishing]

@@TackleAdvisors Thanks for the replay, it is really nice of you that you care of you subscribers. Yes, it is the 3 holed center plate and a separate magnet. After 2 days of trying everything to center it and I was almost to the point of getting rid of the magnet and the fluid and converting it to a freshwater reel, I got it centered with a few dabs of superglue. I can send you pictures of how much damage this reel had from my week trip to Florida and few wave splashes. 3 bearings dead and corrosion all over. I am glad I could save the anti-reverse clutch. The water entered thru the antireverse switch. Cheers!

[@TackleAdvisors]

I try to help everyone I see ask for it... Yeah... Getting hit by waves on a stock ballistic... Not ideal... Water likely got in from the plastic perimeter that holds the metal mag seal washer...between the cap and red ballistic sticker.. There's nothing keeping water from percolating down and once it gets in... It's has nowhere to go. And can collect on the ar switch entry point... Great reel... Stupid design

[@amifishing]

@@TackleAdvisors I fish the salt occasionally, maybe 2-3 times a year during our vacations, can't justify investing into Staal. Maybe I'd get the new saragosa, once it is out and you clear it out. :)

[@brandongraham9958]

Any idea on the handle knob measure for the 5000 and 6000? I’d like to get a power knob/EVA knob for mine.

[@TheTim16964]

What's the difference between this and the exceler?

[@zeroone3804]

wouldn't the teeth from the main gear chew up the plastic oscillation gear when it gets torqued really hard? if indeed it is plastic

[@Mastr-Tech]

I am upgrading my drag washers on my old shimano spheros 8000fa from felt to carbon I am going to be cutting them out from a sheet of carbontex and I don’t know what diameter the washer should be. there is either .5 .8 or 1 millimeter thickness do you know or have any idea of what might work best?

[@TackleAdvisors]

All day Everyday fishing I don't know the exact but if you err on the side of thinner it should fit no matter what. If you have the old washers can't you just measure them? Do you have the sheet material already? If not spend 8 bucks for the pre cut washers

[@dennispenton6872]

BTW I managed to replace the stock washers on my new BLT 5000 with Carbontex ones, and the adjustment range on the drag seems to have improved. Is that possible?

[@TackleAdvisors]

the drags on these seem strange. As someone who's owned lots of shimano and daiwa egg beaters in the past. It's difficult adjust to it for me. I like to play with the drag knob when fighting fish. I may upgrade after hearing this. Thanks dennis. It's very possible.

[@NasalObstruction]

What is the difference between The Tatula LT and the Ballistic LT.

[@TackleAdvisors]

Seals... Ballistic has a main shaft and side plate lip seal. And mag seal to protect the AR clutch. Tatula doesn't offer any

[@wrightackle1]

well the tatula is out for me. That line roller bearing kills it. I wonder if they lose that bearing in the fuego or exceler?

[@wt2067]

pat What exactly?

[@KatiePhongh]

Been looking for a lighter reel to put on my Okuma Rockaway. Can you tell me what other reels in this price category have similar water intrusion resistance and weigh as little?

[@TackleAdvisors]

The daiwa theory and some other non us market reels are similar. The stradic ci4 plus has some similar handle seals but the mag sealed ar clutch is better than their core protect. The weight is key as it's insanely light compared to any metal or graphite framed reel

[@fishingthecarolinas3314]

Have you felt the Saltiga bay jigging reel.

[@swimbaitingohio2777]

I was reading some reviews on the lexa 300 HD and a couple people were have trouble with It engaging mid cast so I was wondering if you have had any trouble with your lexa hds also for large baits is the lexa 400 HD a really good real for that purpose because I like daiwa more than shimano.

[@munirmuhammadsaid7128]

They came out with a Japanese made ballistic LT! Keep doing what u doing! It's great help to the rod and reel community!!

[@TackleAdvisors]

I saw... Very strange. I hope the 2019 new us market release isn't a rebadged version of that. There are 2 new lt reels coming soon.

[@TackleAdvisors]

And thanks brotha!

[@MLcustomrods]

hey, do you know where i can find some generic mag seal fluid, im having problems with my ballistic 2500 after dropping it in the surf...its very grindy and i took it apart about 10 times, im pretty sure the mag seal got contaminated with saltwater so i removed it all now the reel is even worse now...i believe that mag fluid centers the main shaft so without it, it rubs all around while cranking...any help, id really appreciate it, ty.

[@TackleAdvisors]

I'd bet the big issue is the mag plate not being centered... You have to play around with it then put the rotor on and snug it down... Wash rinse repeat... If off center it will be very grind as it rubs in spots... But any magic kit on amazon will suffice... Just need a few drops

[@ddm62571]

Checked this reel out couple of weeks ago at a local tackle store. Very Very smooth.

[@isaiahdodson7212]

Is the Legalis lt worth the money?

[@TackleAdvisors]

I've never seen one first hand. I ordered all the LT reels above that one. It seems to be the exceler with a hex keyed handle shaft vs thread in handle shaft. The exceler is a very nice reel. The literature states it's a thread on handle but a friend of mine from daiwa said on a forum that it's a hex. (i don't like hex shaft reels at all. I've only been able to put time on the Tatula LT so far....and in it's limited 10 to 20 degree use fighing frozen line guides......it's proving to be a very nice reel. WIth one minor gripe which applies only because of it's price range.

[@s0meguy809]

Hmm. Little unsure about a plastic oscillation gear. Sure it doesn't just have a black coating? The main gear of the daiwa SS reels look like plastic at first glance but are machined aluminum and black coated.

[@TackleAdvisors]

I think it's plastic. Though I didn't spend much time on it. It felt plasticy. I'll pay special attention to it when I focus a bit more on the reels. I could be wrong...but plastic is what im goin with

[@s0meguy809]

Tackle Advisors First reel I've seen with a plastic oscillation gear if it is. I wonder if the large sizes are the same? The tatula gets pretty big.

[@Steven-cx6lb]

I wonder if Daiwa Td sol iii lT reel are the same main gear as this?

[@GhettoSuguru]

Daiwa ballistic or Shimano stradic ci4+

[@ericjohnson9193]

Can you tell me what material the main gear in the saltist 5000 is made of?

[@DDugger]

Tackle Advisors thanks for the vids, you do awesome no-nonsense reviews man, great info. What's your opinion of the Abu Premier spinning reels? Particularly for ultralight trout fishing? Just curious if you've had some apart. Thanks.

[@TackleAdvisors]

Thanks man! I never handled one in person. Someone was gonna send me an MGX spinner but my camera went down so it would have been a month before I'd be able to do anything. So I put that off and never put it back in play. I have no idea if they are good or bad. But I'm not a fan of many pure fishing'/rubbermaid/ newell (or whoever owns them these days) reels. That Applies to every brand under that umbrella. As many are made by 3rd party oem's As it stands in my opinion.....There are zero spinning reel manufacturers out there that are as good as shimano or daiwa for freshwater

[@DDugger]

Tackle Advisors thank you, sir. I appreciate the reply, and insight. I do love my Shimano Stradic Ci4+ reels.

[@amigochino1]

Thank you for the video. Does ballistic LT share the same gear with Fuego LT? On daiwa's website , it says both have digigear I think. Thank you.

[@TackleAdvisors]

You're welcome... No it doesn't... Fuego is a cast zinc gear where as ballistic, tatula, backbay, certate luvias go to machined aluminum

[@amigochino1]

@@TackleAdvisors Thank you very much. Are you , by any chance, familiar with Daiwa 18 Caldia LT? Is it any good? I am considering buying the 6000D model. I choose this one over ballistic lt 6000D because Caldia has eva power knob and tough digigear. Thanks.

[@TackleAdvisors]

I have the 2500 on loan from one of my subscribers from Australia... Just finished tearing it down and comparing it to the ballistic.... Main difference is that the caldia has the fuego zinc gear. It may have an upgraded rotor but the difference is meaningless. .. I'd buy the ballistic over it

[@amigochino1]

@@TackleAdvisors Thank you very much. Really helpful information. I prefer eva round handle nob on the caldia to the one on ballistic. Is there a cost effective way to switch the handle knob on the ballistic to a eva round handle knob? Thanks a lot.

[@TackleAdvisors]

You're welcome.. I think jigging world makes an Eva knob... Possibly gomexus... I have some gomexus stuff and it's great.. Double paddle carbon fiber handles for the certate exist and stradic... 4 bucks and I like it as much as my 200$ Yumeya

[@Cornuts1000]

Great review. Do you knowwhat the difference is between the D version and the XH in the 2500?

[@TackleAdvisors]

Gear ratio.... Daiwa was supposed to send me the D but instead sent me the xh... And fought me on the exchange.... Really pissed me off.. I mentioned that in another vid as I prefer slower spinners in fw

[@noodles8784]

@Tackle Advisors, what is the major difference between this reel and fuego lt? Thank you.

[@TackleAdvisors]

Hey Noodles... Ballistic advantages = much lighter for same size. Much more rigid frame. Forged machined aluminum main gear instead of cast zinc. I think it also gets a few corrosion resistant ball bearings.

[@noodles8784]

@@TackleAdvisors Thanks a lot! Have a great weekend!

[@noodles8784]

@@TackleAdvisors by the way, the ballistic lt 6000 has good crank power, versus , let's say, daiwa bg 5000? I prefer a reel with good pulling power. Also, Daiwa website says the ballistic 6000 lt has an IPT of 26.4'', i think there is something wrong there considering the 5000 lt has an IPT of 34.5''.

[@allengallion930]

I was really wanting to get the new Ballistic LT 6K for my new rod but I might just stick with the proven saragosa 6k. You think the Ballistic could stand up to Tarpon and other large Inshore game? Love to have a reel that light

[@TackleAdvisors]

+Allen Gallion I've never seen the 6k lt reels.... But just took apart the daiwa fuego lt 2500 and compared it to the Penn battle 2 4000...the let has a larger more robust main gear. And it's almost half the size... Blew my mind enough that I stopped filming the comparison to the other six just to break out that part. So as a guess I'd say yeah the 6k would

[@831savageoutdoorsman6]

I’m thinking of buying ballistic lt or the ci4 I need help making a decision can someone push in the right direction

[@TackleAdvisors]

What size? I dig the daiwa over the stradic. But it's pretty darn close in the smaller sizes. But the 6k ballistic is friggin a game changer for being so light

[@831savageoutdoorsman6]

4000 size reel I fish over here in the Monterey Bay Central Coast California I want to use it mainly for surf fishing perch and striper.. by the way I’m a big fan of your page And thank you for replying back

[@CookingandFishing]

Excellent intro, can't wait for the full review. That line clip works much better than that of the stradic fk!

[@user-je2fb7xf5t]

What is your opinion on megabass rods

[@somthegreat7430]

Stradic ci4 or Ballistic lt?!?!?!

[@muskbeard3924]

How do you remove the brake dial screw?? Would really appreciate this info 🙏

[@TackleAdvisors]

ON which reel? Brake dial screw?

[@muskbeard3924]

Tackle Advisors older steez baitcaster first generation ex 100

[@muskbeard3924]

Tackle Advisors the big flat head screw that goes threw the magnet dial, to take off the side plate

[@swimbaitingohio2777]

Just a quick question I got my new tranx today and I can wiggle the top of the level wind but The bottom part on the worm gear is solid. Just wanting to now if yours does that to

[@TackleAdvisors]

Yup...that's to be expected...most reels do that.

[@swimbaitingohio2777]

OK thanks that had me worried its a great reel casts a country mile.

[@bethlehemlacrosse24]

Do the new Daiwa LT reels have problems with the frame flexing?

[@TackleAdvisors]

the tat and ballistic under 3k size. I only found it noticeable when winding under very heavy loads......never while fishing....or fighting a fish. Or when retreiving a lure. Only really when spooling under heavy tension and when hung up at distance winding up the tension prior to knot failure. Larger than 3k...I don't know if flex will be any more or less evident...my guess is it'll be less.

[@bethlehemlacrosse24]

+Tackle Advisors thanks for the reply. What about the cheaper LT reels like the exceler? Same frame rigidity?

[@TackleAdvisors]

No..They do flex a bit under load. Not sure if it'll effect gear wear..but you can feel it twist a tad under load..it's not awful...it's better than standard plastic/ graphite...It reminds me more of the original stradic ci4..if that makes sense

[@bethlehemlacrosse24]

+Tackle Advisors yeah. Im looking at these reels for bass, so it sounds like bass won’t flex them much

[@logicalrationalfishing7481]

Really looking forward to seeing the comparison of the old Ballistic versus this and the others you mentioned. I was seconds away from ordering an old Ballistic EX 2000 and backed out because it didn't have a line roller bearing. I ended up with a Revo STX20... Well I got the Abu for a good price, it is very light weight, and casts as good as any, but it definitely doesn't feel as durable now after 1.5 seasons of fishing. My older Ci4+ FA feels much more fluid and it has caught many more fish and I've had it a year longer. I still like my Revo STX20 and use it a TON (primary dropshot setup), and Abu has great customer service, sent my fiancé a new Revo Premier 30 to replace the older model that had issues. Just waiting for your coming reviews, because I might demote the STX to a 6'Light for panfish and put a Stradic Ci4+FB/Ballistic LT on my Medium Light Villain 2.0.

[@greatorangesky]

Daniel Dean my Ballistic Ex have a roller

[@logicalrationalfishing7481]

Well, they have like 9 or 10 bearings, I always figured they DID. Now by roller, do you mean anti reverse roller bearing or a LINE roller bearing. An anti reverse roller bearing is a weird little bearing with rolling shafts that prevent movement one direction. A line roller bearing is just a bearing that spins the line roller, a totally normal looking ball bearing at that. Once again, I always figured they DID have a line roller bearing (Certate's and some higher end Daiwa's have 2 on the line roller I think), but a few people on forum's told me the Ballistic EX did not have a line roller bearing.

[@HeyUncleA]

This reel or the new Stradic fl?

[@TackleAdvisors]

FL unless the weight is of primary importance

[@nickmeijer026]

@@TackleAdvisors Got kind of the same question, I'm thinking the new FL in a 1000 or this Ballistic LT in 2500 for Carolina rigging. FL is 160€ and Ballistic LT 200€ Which one should I pick

[@Sean-yh5ds]

Tackle Advisors FL as good as ballistic in salt ?

[@danplatt7385]

Could you do a video on a break down of the 2017 shimano scorpion dc. Not to many videos on it.

[@TackleAdvisors]

Hey Dan...I'd like to but I don't see one in the near future.

[@vanstaaler]

I want to see it put back together spinning smoothly ! ;)

[@TackleAdvisors]

It's spinning nicer than when i first got it! :) Sadly though I have to return it...they shipped the XH gear ratios....when i wanted the slower ones...If i was just drop shotting..i"d have kept it. But for working minnow baits and such..i prefer slower reels.

[@vanstaaler]

Me too. Ordering the 2500XD tomorrow for the rod I just finished. It’s sweet..

[@TackleAdvisors]

I think you're gonna dig it....Don't let your son steal it! lol

[@Sean-yh5ds]

Actually he just throws them out when the video is over and opens a brand new one.

[@johnnydelbosque4939]

Can you use the shimano antares in saltwater

[@TackleAdvisors]

Yes...but like anything to do with magnesium......It'll last like plastic in saltwater...as long as that coating is intact... Screw holes and scratches are places where salt can really do some damage

[@alexandruioanes2377]

First and foremost thank you for the insight! Did anyone have the oportunity and the curiosity to check whether it is possible to put on a Ballistic lt 2000 size reel a 1000 size spool or not? I ask since the 2000 and 1000 have the same dimensional specs (not counting the retreave report and spool capacity) I have a 2000 D-XH model and can only find 1000 spools for sale. (Checked only in stores around Europe). I would very much appreciate if someone could do this trial and share the results.

[@thaihew1874]

Love the reels tear down! Keep it coming.

[@TackleAdvisors]

Glad you enjoyed em! Penn Slammer vs Daiwa Saltist i up!

[@sebastianniemiec8647]

I agree. Keep them coming. Specifically 200-300$ range. Producers do a lot of magic tricks. I just slammed my slammer III 4500, piece of junk. I thought it was strong, water proof gear. But all it is, just bunch of random picked gear's, not fitting to each other. So please show to public, what's inside. And thank you.

[@jerrytube13]

I am really curious about the Exceler LT. It looks like the perfect non mag sealed Daiwa.

[@sonysugiharto7196]

Jarek Czarnecki i've buy exceler lt 3000, its grinding, and reel foot was flexing under low load...

[@stevenberg1903]

Felt drag washers?