New 2022 RC Car Extreme Testing to destruction - is it as good as they say?

[@jimjimmyjam8242]

I had a feeling once you pointed out the bent drive shaft out of the box, it was gonna be a disappointment. It was a fun rc for a few good jumps thanks for the video 😃

[@SEEYAIAYE]

Something I'd expect from a RTR from Banggood, not a $650 roller.

[@bra1nc417d]

Not the driveshaft, it was that carbon fiber brace. It was bending up, sticking out of the chassis.

[@Basherqueen]

Mine rear drive shaft from the XTR 2022 was bend even worth fresh out of the box.... 🤷‍♀️ HOW?!?!?

[@peterhumphries9227]

Another honest review that just doubles down on the fact that Corally just doesn't quite cut the mustard.. Thanks for the video kevin.

[@klausknudsen106]

I own a Kronos v2, never broke or bend anything on it, so for normal use, it can hold up quite nicely, what Kevin is doing is extreme, and i don't believe that all of you are that hard on your cars, just keep that in mind.. Bless you Kevin for doing what you do, so we don't have to ;)

[@mrclairesrcs3290]

The chassis bent before it got any real air. The steering went funny just from standing back flips 🤣

[@raynman6466]

It's still nice to know that your rc will stand up to the abuse were something to go wrong or if you decide to do some hard bashing. Weak spots are still weak spots

[@skeezixmccat]

I have a Shogun and I agree, if you aren't actually BASHING, Corally makes terrific cars. But if you need it to fly into walls and land literal 40 feet drops directly onto the nose/wheels/etc...get a Sledge.

[@klausknudsen106]

@@skeezixmccat Sledge is tempting, its just far to expensive.

[@jaybomb5022]

Lol this thing couldn't withstand a light breeze compared to pretty much every other RC he's ever featured. For an expensive kit, a bit disappointing the lack of ergonomics and durability.

[@TomleyRC]

After watching the EXB, Sledge and Kronos videos... I'm going EXB - 1st Sledge 2nd Kronos 3rd (although it had harder hits than the sledge) You need to take the Sledge to that Skate Park to make it fair.

[@krazicanuck9045]

We will see what kind of hop ups come out for the sledge. The exb has loads now and that makes it number one in my books too. But let’s see if that changes in a year from now

[@joeyfiend7864]

Ay tomley! 😎 I definitely agree. The exb is superior with the 7075 chassis, shock towers, and chassis braces. Imagine if the sledge had those similar parts out the box 🤔

[@rustler08]

The Sledge completely stock is a vastly tougher car than the "7075" junk alloy that the EXB comes with. I don't know where Arrma sources their 7075, but it's such a mediocre alloy that it's only a wee bit better than most 6061 stuff. If you're buying an EXB, you better buy either a real 7075 chassis or that brace Kevin has. You're going to have a bent chassis and a bad time, otherwise. Also, buy yourself some spare shock shafts, bulkheads, and tie-rod ends. You're going to break all of those pretty often on the EXB.

[@TomleyRC]

EXB without aftermarket upgrades held up better than the Sledge, so I guess it will come down to cost at the end of the day

[@eM4rio]

@@TomleyRCwhat held better? We all know the EXB problems. Lost dogbones, braking cups, play in diffs, cheap screws, loosing wheel nuts, braeking shock mounts and the most annoying one, breaking wing mount... that's just to much for me. Traxxas have overall a better quality than Arrma, even Arrmas stickers dont stick :D so I hope that Sledge will be better, to make Arrma just a kick in the butt for a push to make them EXB2 without all that quality/bad design things :D

[@rcfungames]

Hi Kevin So it's not that tough 🤪 still better off with a Max Great job unboxing it and showing us what it was capable of 🤘😎

[@derekgardin1512]

The new Traxxas did way better. Corally XTR no better than version 1

[@scager310]

Man, I watched ONE recommended video a few weeks back and I’ve been undeniably hooked on this channel since. I’m even saying things like Tumble Wumble in real life. Infectious, this man! Keep it up!

[@KevinTalbotTV]

Welcome aboard!

[@al78cck48]

It's ABSOLUTELY EPIC

[@lancevanbeurden3184]

Yup, I just said tumble wumble today myself - it might just make it into the dictionary!

[@cdogsixty-nine2674]

One thing I'd love to see at the end of your bashing vids is a damage assessment back at your shop. Kind of take it apart a bit and see what all is actually broken. Then we can start to see the weak points of each vehicle. Just a thought. Love the videos!!

[@darkki94]

that + the repair bill $$$ !

[@dandlugolecki3408]

This is good and all, till he gets blacklisted by all of the companies for pointing out EVERY single flaw. Are the videos not a good enough representation?

[@marquisjamie]

Kevin is so hard on his rc’s that parts are bent before he even drives it for the first time 🤣

[@808tone6]

They come pre-bent just for him. Gives that worn in feel. 😂😂😂

[@rcjabroniyup4959]

That drive shaft bent out of fear. It knew what was coming.

[@wallacengineering8096]

You guys gotta remember Kev breaks literally everything - Maxx, X-Maxx, Kraton EXB, all of it. So its a tiny bit disappointing out of the box. Bummer, thought we had an alternative to the Kraton EXB for a minute there. To be honest, Kevs landings did make it a but unfair to the truck, especially smashing the edge of that ramp - oof thats extremely rough, but no matter. With the popularity of this truck growing, alot of us think that M2C Racing will develop a 4mm 7075-T6 chassis for it. With the chassis being the backbone it should reinforce the whole truck enough to take a massive beating without any other mods, so lets hope he comes through on that 👍🤜.

[@yanli4539]

We have all seen an RC get punished hard but the comedy you bring to it KEv is just GOLD! RIP TC

[@microbuilder]

Would also be interesting to swap out the metal chassis on one of these cars with a plastic or carbon fiber to see if its more durable.

[@MangoJim90]

Yep!!! Will excessive bendage kill some internals or not

[@SEEYAIAYE]

Wonder how a good length of hardened plastic would do like the kind for a plastic chopping block.

[@mullymulligan4643]

Looks like the traxxas sledge takes the crown on the latest bashers, thats the 1 I'm gonna buy thanks to your videos 👍👍

[@matthewkilbey4492]

You are a mad mad with your expensive toys! Love it.

[@gr769er9]

Thats why I like this channel not only do you try new rc cars out but you actually put them to the test so we know if it's worth it are not.

[@winstonbattle]

Kev you're goin to destroy that Arma , and I'm here for it !! #1 fan

[@nautynate420]

landing in that tree had to be the best possible outcome from that jump, freaking awesome!!!!

[@bwplays2713]

I literally said I wish Kev made a new video and then I saw you made a video what a coincidence 😂

[@talhaakcaboy]

i think this is the only video that Steve is not smoking :)

[@edwinlomonaco6754]

To be fair, although this video is old, I recently bought an Arrma Kraton BLX RTR. After only 3 runs the motor locked up. And the center diff failed. The center diff was completely dry. No diff oil at all. And the motor center cartridge literally just exploded into pieces. After only 3 runs. I got everything warrantied. But it's been over a month waiting on replacement parts. So lesson I learned is that with Arrma rc you can't trust what you get. You buy one the first you have to do is check all the diffs. Check all the bolts. And then rip it.

[@rooseveltrainesjr7618]

Man Kevin u put the new sledge thru worst run. An it out did the arrma. I was running my Mojave exhaust. An broke the front bumper from underneath. I'm guessing a bad landing no problem just ordered another one. Keep up the video s brother

[@radunit4805]

At 11:39, that Kronos decided to nest on that tree 🤣

[@joshdunbar9721]

Its need stiffer springs. Kraton springs will work

[@spacelight5287]

Christmas everyday never ends 🤣🤣🤣🤣🤣

[@rcaddict2865]

Ello! Love ur vids kev, you never fail to disappoint, video idea: Xmaxx with x amount of wheels (10) and make it awd!

[@rccarsandstuff4690]

Never fails to disappoint???

[@theAessaya]

Hey Kev, thanks for the videos! Always amazed to see how far some of the cars can be pushed (and some can't). I have a question for you: do you modify any of the shocks on the bashers you run, or just run them bone stock? I'm specifically interested in ones on the Kraton 6S's, since that's what I have here. Started doing some higher jumps lately (still learning aerial control to prevent lawndarts), and noticed that even a moderate send often results in full chassis-slap against the ground upon landing. Figured doing some shocks modifications might help there. What's your take? Thanks again!

[@sonorite2665]

definitely a good idea to do some shock tuning if you're chassis slapping a lot. I would just put in thicker shock oil, maybe add preload depending on if you still want stock handling or not.

[@theAessaya]

@@sonorite2665 That's what I've been thinking. Thanks! I'll try some different thickness oils. What about the shocks tuning pistons that come with the Kraton, what would be the uses for them?

[@KevinTalbotTV]

Usually leave it stock and let it slap. You can stiffen the shocks but then you can start killing arms, towers, shocks, bulkheads etc

[@thunderstormrc]

If you do big jumps the chassi will slap against the ground no matter what. You can try to adjust the shocks but if you make them too stiff you will start breaking or bending stuff.

[@theAessaya]

@@KevinTalbotTV thanks for the reply! I'll try and play with different oils and the supplied pistons, but will definitely keep in mind not to overdo it. Funnily enough, chassis bendage is real! Mine's already slightly bowed up in the middle (which is weird, I kinda would expect it to bend downwards). Not much, but the "talbot test" definitely reveals it.

[@michaelmcclanahan2860]

You should try some Redcat products. They had some super cool crawlers for dirt cheap. Be cool to see how they are with you.

[@austinmccoy8835]

I would really like to.see the banggood special "Rofun something or another", just look.it up and it should come up. Awesome vid tho Kev👏👌

[@OfficialStumpMan]

When you launch them off a skate ramp, I think they will always bend. LoL

[@BangForYourBuckRc]

I’m starting to think that if your going to keep jumping at the skate park you should at least try to keep it in the park, not jump over the whole park!😂😆 Jeez, you could hit a bird, or a plane or something!😂😜! Epic Kevin!

[@pyrace]

My Wife just said They need to make a Truck that's absolutely indistructable and Call it the 'Kevinator' 🤣🤣🤣

[@stuckintrees4796]

That’s the perfect landing spot. Haha👍

[@RACEABLE]

Toy grade 6s monster truck, first time!kudos Corally!😂😅🤣😅😂

[@surekhakarale8694]

Big fan from India Uncle 🇮🇳🇮🇳🇮🇳Please reply me 🥺🥺🥺

[@florenciomontero6137]

Greetings from México!!!

[@alvaroporteroortiz1034]

Hola soy español y me encantan ver tus vídeos eres el mejor Bro te adoro

[@sbrunner69]

I’m so surprised it broke. Seems like you test fair normal wear and tear.

[@jonoedwards4195]

YAWN FEST!

[@theroadwarrior666]

Hey kev here's a little truck for ur rounded Allen's. Stick a torks bit the same size in it it will grab the corners and usually get em out quicker than drilling and using extractors

[@hemidart7]

How about a company that just puts good hardware in the first place

[@williamtorbeck5641]

KEVIN I watch all your videos doing all the endurance testing I wish I could, thank you for all you do. Cant wait to see the monster truck finished! PLEASE! do you have any RC models you could sell at a discount? I simply cant afford a new model on ssi. Just looking for a leg up on a hobby I wish I could afford. Id pay shipping

[@phrc5679]

If you would like to get his attention you probably gotta get to a vid earlier

[@nickgreennjg9158]

Kev just keep bashing if your smiling 🙂 it’s working!!

[@bsbigrcadventures2089]

I didn’t think it was going to last very long befor you brock it lol 😂 👍

[@evanvandevelde9891]

i dont think that that was a fiar test because you way overpowered it great video again.

[@olds97lss]

With a max8/4074 2200kv? Pretty much what comes stock in most 6S trucks. Well, the max8 is fully functional whereas the RTR's are usually limited in some way with the settings.

[@Bn7jeL]

My friend Kevin, why don't you run a drag competition on drifting cars that will win people's hearts

[@tomajohncampbell2866]

Have you ever reviewed the Redcat Kaiju?

[@andrelietzau2015]

Kev is it possible for you to do a review on the arrma vendetta 3s please and if so try to make it faster

[@TheWoodlandhoBo]

Great episode 👍🏻

[@TpPartsRcXtreme]

Looked good, the ramp pipe landing aint much to do bout..BUT that you bended the front kickup, and the jumps wasnt to big at all, suprised me big time tbh...

[@minnesotatomcat]

I love how there’s never actually anyone skating at the skate park, that’s a good way to repurpose though I guess 👍

[@someguywhoexists9880]

Hey kev you should see if the 80cc Raminator can tow some cars with someone sitting on it

[@bonggwick420]

I just bought the Kyoto 1970 dodge charger supercharged would you be able to do a video on it?

[@jle1226]

Are you doing the uk or us monster jam

[@worldwolf9909]

That last landing would probably bend or bust any chassis.

[@KevinTalbotTV]

Scorched and m2c would probably have taken it, maybe!

[@rabidfan9497]

Man you are so tough on your toys.

[@brei.z]

I got Some screw extractors after the last time i saw you use them. Already Saved me from having to buy parts that would have cost more..

[@boostedKTM]

Good stuff my dude

[@Wattvr1]

Just wondering where did you get the son of a digger

[@Ris-v4w]

wow ! this looks really fun! when you don't care about costs of course 😂🙁

[@danielnowakowski1528]

Kev, love you videos, would be awesome to meet up for a bash, im only 20 minutes from your shop so should be able to work something out

[@soothan86]

Seems good for the most part but kev can you maybe for once do the technical babble

[@soothan86]

Please?

[@ripleysautos5207]

Looked good without the stickers 🔧🔧

[@nefziazer3944]

Try to put the ramenator wheels on the longest rc car

[@Haha-ld8zq]

Hey Kev I am looking for a brushless combo to put in my slash 4x4 What would you recommend?

[@calvinbaker4812]

Make it fast 3800 kv spectrum woo hoo

[@808tone6]

Max10 combo

[@fishnmaster421]

Kev breaks his. Than talks other guy to send his to the moon lmao

[@GinjaNinja77]

10:42 Kevin tells you what he really thinks about Team Corally products.

[@JohnWhite-ej7ln]

Any rc this guy gets he does great R&D. But I would never bash that hard.

[@JohnWhite-ej7ln]

Because I can't afford to yet.

[@jojoelliott7892]

Was this video just to show how much better the traxxas sledge is???

[@mel-vp4dz]

I thought the Traxxas sledge was the top basher

[@shane4176]

Wow that thing seems pretty junky compared to Arrma and traxxas. Cool video

[@affectedbanna2288]

Here since 900000k subs

[@jackray8837]

awesome kev!

[@thesausage351]

I doubt I can afford one but omg I want one. Sooo bad lol.

[@robertward5047]

At least it lasted longer than the kraton

[@bigred8022]

Hi kev can U plz review the radix 6 plz

[@daniellarsson3699]

Please do a test on the Maverick Quantum+ XT FLUX :D

[@rchobbyenthusiast2151]

8s Steve in the house

[@integrityrc7356]

Tape the wire down 💥💥🕺

[@Ryan_killz]

Kevin can you have a Ford raptor and then upgrade it?

[@crombie1792]

Thanks kev

[@FlashBro-r4w]

Go team corally in the trees 🌳! Lol

[@LIMITLESS.420]

Where are the windows 😂 Oh wait there are stickers lol

[@Alphabet7]

You have to make a video on comparing the exb kraton this car and the new traxxas Sledge

[@gordonendicott5114]

The destruction

[@FlashBro-r4w]

The first corally was for experimentation The second was to finish the experiment lol

[@Matthewv1998]

i guess you can say the sledge smashed it

[@spexgamer4967]

do more ftx rc cars kev

[@cptawsome731]

You should really try a tekno mt410 kev

[@lidiaeichas5794]

BTW I'm a new subscriber .... ok..so far ..your the best . Keep up the good work Kev.

[@aadin1945]

Welcome 😛

[@allrc6339]

David isn’t bashing right lol

[@ExelArts]

I love my punisher from team corally but everything seems to bend and break easily tiny screws get lost because of no loctite and the ball bearing for the wheels pop out all the time

[@matthewwhite5606]

Love ya vids Kev!

[@gregmcclure2640]

So much Car-nage!!!

[@michaelmain1990]

The screw stripped because you were a size to small

[@taylororange3688]

I was going to ask the traxes sledge or this because it look similar for the first 30 seconds but I think i got my answer

[@ddawg0863]

7:12 right again!

[@Fortniteman66]

For the driveshaft you could shave it down

[@hemidart7]

No the company should do better desighning You don't buy things new just to have too fix it before you use it

[@CgitEinsteins]

Why ?

[@KevinTalbotTV]

To get you to watch… It worked!

[@CgitEinsteins]

Tambo wambo

[@TheGandorX]

So what did I learn. The RC car is not Kevin proof, but it is the-other-guy proof.

[@lennchadful]

wait.....that price and there are no electronics? good luck with that

[@KilikSNC]

Would be cool to test a Tekno MT410 for us, thanks 😉😁

[@XTROMAR45]

Second because girls first 🤪

[@PCaimb0t7]

nope it’s boy and girls your first 🤣