NEW! 6 Seat Aircraft - FACTORY TOUR - CompAir Aviation 6.2

3 Florida Locations! One awesome CARBON FIBER Airplane! CompAir 6.2
👇🏼 👇🏼👇🏼 Click "SHOW MORE" to see the LINKS Below! ✈️✈️✈️
Please follow us on Facebook where we post nearly daily:
/ experimentalaircraftch...
Check out our NEW WEBSITE!
experimentalaircraftchannel.com/
#experimentalaircraft #experimentalaircraftchannel #carbonfiber
Find this Aircraft at:
compairenterprises.com/
And the partner Composite Manufacturer HERE:
www.5axis-cnc.com/
***SUBSCRIBE Right Now to Experimental Aircraft Channel
(It's FREE) and get exclusive offers below!
Please visit our Channel Sponsors here:
*Dynon Avionics (Avionics for Experimental, Certified and Light Sport Aircraft)
dynonavionics.com/
*Wide Open Door Company (High Quality metal doors and Hangar Doors)
www.wideopendoorco.com/
*Warp Drive Propellers (Solid Carbon Fiber props for Ultralight, Light Sport and Experimental Aircraft)
warpdriveinc.com/
*South Mississippi Light Aircraft (Official Rotax Repair and Training Center)
flysmla.com/
*Pioneer Control Grips (Custom Grips for your stick controls)
www.pioneercontrolgrips.com/
*Edge Performance (High Performance Aircraft Engines)
www.edgeperformance.no/
Please visit our Affiliates Here:
**Flying Eyes Optics - 10% Off Use Code: EXPERIMENTAL
flyingeyesoptics.com/eyewear/...
**Griplock Ties (Speaks for itself!) Free Shipping with Code: EXPERIMENTAL
griplockties.com/?fill_cart=1...
(Get FREE Shipping *USA ONLY*)
Join the NEW Facebook GROUP where we encourage "Say it With VIDEO" build updates on YOUR current project:
/ experimentalaircraftch...
And we are on INSTAGRAM too!
/ experimentalaircraftch...
WE HAVE A PODCAST! Audio only can be found on iTune, GooglePlay and Podbean. Fill VideoPodcast (V-Podcast) on KZbin by searching "EAC Aviation Podcast" or click: / @eacaviationpodcast9668

[@dandunlap8638]

That’s a very cool plane. I do think that company could benefit from some 5S discipline.

[@chrisscott1315]

This crew has done so may projects that most companies couldn't even attempt!! They have a small company of expert and skilled employees that are dedicated and very detailed in their processes! I belive their newest employee has been there over 6 years! Keep it up Composite Technologies and Comp Air !!!! A d great footage and awesome job with this video! What a badass plane! Big and comfortable plane ready for a group!! Sweet

[@DannyCreech]

I saw those guys at Oshkosh this past year 2023. Nice aircraft.

[@lesb3481]

Great video! After seeing so many kit aircraft ventures go bankrupt over the years by trying to succeed on a dubious combination of inadequate startup capital and advanced customer deposits, it's nice to see a currently successful company with multiple revenue streams involved in bringing an aircraft to market. They not only already have extensive experience in composite design and construction techniques, but appear to have the financial ability to withstand the considerable time of sinking money into the venture while waiting for the product to succeed and provide a return on the investment. The innovative design and exceptional performance of the CompAir 6.2 aircraft is also amazing.

[@Rickster621]

That's awesome, I'm a trained CNC machine operator so it's nice to see 5 Axis getting quite common.

[@AJdet-2]

A trained CNC operator..?? Are you also a machinest..??

[@Mobev1]

Some people just complain. I have been in composites and own a mde in Brazil and colombia and these guys are great.

[@straightchad8059]

Great coverage , certainly learned a lot .

[@edwardleierzapf4552]

Really cool video! Thanks for making this kind of content.

[@RaceMentally]

This is like a “Sky Gate” build. “Ocean Gate” was successful but only for so long.

[@robertamie4895]

I like it😮.

[@johnlonguil4157]

5S….that place needs 5S

Great video!

[@spritual_enlightenment]

Impressive video.

[@peteranderson037]

Everybody is an aerospace engineer on the Internet.

[@br4nd0nh347]

What matters is the end product and reliability. Wish I could afford one.

[@ruddervader3167]

Go see epic aircraft. I want to see how they put the wings and tail on that plane. Plus it has a cool progressive design history.

[@tropicthndr]

Why waste time with that thing, it’s over four million$$$ now. The “Sparker” with the Edgeperformance 916 is what you want.

[@wallyworld9096]

One good x wind and that narrow gear gonna roll you on your side

[@DanFrederiksen]

Very interesting. They don't do anything to contain the loose carbon fiber to prevent breathing them? that might not be entirely healthy. Like how breathing asbestos was not entirely healthy.

[@tinolino58]

There is no loose carbon. It’s all bonded in epoxy.

[@DanFrederiksen]

@@tinolino58 all those frayed edges, there is just no way that isn't breathed in. have you checked under microscope? in air filters?

[@patrickbarry7474]

Is this type of construction method common?

[@pedrobalduci7754]

NO!!!!!!!!! this is by far one of the lowest grades of composite work I've ever seen!

[@alexmikhael5061]

THAT IS A W E S U M !!!!!! I hope we can do bizzyness after I win the lotto lol or powerball or yea... whats the stats on the turbine version ??? can that extra space in the wings that the dude said was ''EMPTY SPACE'' in the middle at the rear ?? of the wing.... can THAT BE ADDED AS FUEL SPACE??? I can get a timestamp if ya look at this and have no clu what space I was referring to.... it was in the WING ROOM while they were talkin about the lower skins and the spars n stuff...

[@alexmikhael5061]

POST LOTTO OR POWERBALL OR WUTEVER I WANNA DO BIZNUSS WITH THIS PLACE!!!! seriously awesome 20:42

[@clareneufeld5853]

What is the noise level like, during T/O, cruise, etc. (for pilots, and pax)? What abatements are applied?

[@Dragonrc.]

Man thats a scary way to do composite layup on something like a plane. Yikes

[@pedrobalduci7754]

OMG YES i would not get into a boat made like that, let alone a plane

[@RubyS.1]

Yup

[@davidmvermillion]

I don’t know much about composite construction. What are they doing that makes you question their methods?

[@pedrobalduci7754]

absolutely no air quality control, very minor temperature control, no post-curing whatsoever, fabrics handled with bare hands (can lead to delamination), drums of polyester resin, etc. this video is a materials engineer's nightmare.

[@RubyS.1]

@@pedrobalduci7754 no tool or hardware accountability. The bare hands is actually a really big deal. Should be far more sterile especially because it's composite

[@asifmehmood5632]

Hello sir its my dream to work in usa , in an aircraft making company . And i believe you are the perfect . Plz give me an opportunity to work with you. I will be waiting

[@seamuscashin2606]

thats the best sell i have ever seen i cant mix 1oz of epoxy without destroying all my clothes my hands my eyes

[@Dragonrc.]

Just the lack of climate control and dust in their layup process would make anyone that knows composites cringe

[@MrPaige222]

Am i doing the math correctly? A fully loaded 6 passenger airplane brand new for less than 650 grand?

[@kenl.3775]

Six people, five passengers and a pilot

[@alphonsozeldin7999]

"promosm"

[@jamessanders5648]

Yeah...this video probably won't help sales. Very messy facility with non-existent organization of materials/chemicals and I bet there's no documented version of standardized work instructions. Not too many people who could afford such an aircraft would purchase it after seeing this video and jeopardize their safety.

[@fifi23o5]

True. I've never even seen such a mess in the boatyards.

[@zekigokkanat6926]

I don't think so James, just look at result mate 👍

[@chrisscott1315]

They have over 175 years of composite experience between their small group of 7 composite technicians!!! They have proven their quality over the years with the amazing things they have built over the years. From the space industry to the entertainment industry, their products are quality !!! They built the fire breathing dragon for the HARRY POTTER ride as well! An amazing job on that!!!

[@zekigokkanat6926]

@@chrisscott1315 Wow 🤣🤣🤣

[@Sometungsten]

Their business model and use of resources should be required reading for all business students. Holy s..t Batman❗

[@flysport_tedder]

come for the turbine plane, stay for Teenage Mutant Ninja Turtles content. wtf!

[@pedrobalduci7754]

jesus christ everything looks so dirty... this is a disservice for the composite industry!!! i hope nothing happens for some delamination caused by dirt or skin oil...

[@ryaninman6307]

I do not know if the LORD and Savior has anything to do with it being so dirty.

[@BradSchmidtPlus]

Who would consider one of these after seeing this? is this some kind of joke?

[@richard8181]

A very diverse operation, well done. 🫡 Not putting all your eggs ($$) in one basket .