New Amcrest 5 megapixel PoE Security Camera with Color NightVision - Install and Comparison

[@warkmard-dw4dw]

I have 4 of these cameras at work, they work flawlessly. And they work online and offline (locally without internet access) connected to my offline wireless router with the Amcrest app. I was blown away by its color night vision. At dusk and dawn it looks like it's 9am outside. Amcrest cameras are actually rebranded Dahua camera's at half the price

[@kennetheisenmann9098]

I've owned a Amcrest IP3M-943B 3MP WI-FI bullet camera for 10 months now and I live on the border of northern Wisconsin and the U.P. of Michigan. We get some pretty harsh winter's here and the camera has performed flawlessly.

[@kevindavis7377]

Are the 3 mp fuzzy just wondering because I have the 8mp NVR POE

[@SLP-eb1wp]

Been using Amcrest for the past 10 years. Never had a failure on the boxes or the cameras. Good prices on e-bay.

[@lmamakos]

Just note that the field of view (how many degrees wide the view is) is a function of both the focal length of the camera lens as well as the size of the image sensor. So when comparing different cameras with the lenses they ship with, you don't want to think that the view of 2 cameras with 2.8mm lenses is necessarily the same. Also, the low-light performance is a function of the camera sensor itself - larger pixels are more sensitive because they collect more photons. And also the ratio of the focal length to the diameter of the lens. These things interact - if you compare two camera sensors that are the same physical size, the one with larger pixels will be more sensitive, but have lower resolution because you can't fit as many pixels in the same area of the sensor. This is why more pixels isn't necessarily better. Everything else being equal (sensor size, optics), a higher resolution camera sensor will generally have worse low-light performance. Thanks for the video!

[@digiblurDIY]

Thanks for your additional insight on things!

[@dxdux]

The amcrest is better and it will work without issues on any nvr (specially Dahua's) right now there are just $45 on amazon!. Thanks for the video.

[@digiblurDIY]

You can upload the Dahua firmware bin file to these too!

[@margyjr]

Hi again, just letting you know, I just purchased the Amcrest 5mp camera from your link below, I hope this helps you, Thanks again for great videos,😊

[@digiblurDIY]

Awesome, thank you!

[@JonFlyTV]

Almost pulled the trigger on this one but disappointed that it is only 20fps :) thanks for the great channel - full of awesome info. I was going to go nvr route but after watching you, I am going the blue iris route

[@digiblurDIY]

You do have to lower it a tad to pick up 25/30 but do keep in mind if you want to run that high of a FPS, be sure to go beefy on the CPU/GPU on BI. A very similar starlight night vision model that is 4K 30 FPS is this one. Works great. amzn.to/3i4rykr

[@JonFlyTV]

@@digiblurDIY Thanks, I will be getting the Amcrest that you linked. Yes I am finding the BI really wants a good CPU/GPU - good excuse to build a new itx Ryzen system. Thanks again for all of your great content, really has helped me.

[@Rebel97Yell]

Outstanding review! Just subscribe after watching your in depth review!

[@digiblurDIY]

Thank you!

[@Hashterix]

Bought two of these (noticed that to install you've got to drill a big ass hole in your wall if you don't want a junction box which is ridiculous, they could have designed that part better). Note that your UK link is for a different system and not these cameras, I looked everywhere and just had to order from US amazon which was delivered to London in 3 days.

[@digiblurDIY]

I do wish on various cameras you could detach the pig tail but I assume that's their way of keeping the water rating. Seems to be the norm in many brands.

[@Hashterix]

@@digiblurDIY Another issue is storage, I damn well wish it supported the Amazon S3 API since Backblaze B2 uses this and doesn't support FTP. The cost efficiency of using B2 as the off-site file storage is well over 100x that of Amcrest's own cloud service. Otherwise I'll need a middleman but I really don't want to go that route.

[@carnavalesenpanama]

This video helped me to buy two cameras

[@FierceDeityLink1]

Nice, the starlight performance on the driveway footage looks p good. I set up Frigate recently for object detection, and I was disappointed that bugs flying close to the camera will still set off motion/object detection sometimes due to the IR lights blowing them out. Maybe this Amcrest would be a good replacement.

[@mfir]

Still loving my discontinued IP3M-941B. Time for addition of the newer models!

[@lelandclayton5462]

@digiblurDIY I did a Dahua IP Camera install today that uses the same method of mounting the Cameras and it really sucks. Spent 30 Minutes on two of the four Cameras, the other two were easy since I mounted those on Nema Boxes but the two that I mounted onto the soffit kicked my butt.I miss the locking/screw ring.

[@digiblurDIY]

Set screws are difficult to use for some people I guess? What's next? Gluing the camera to the wall?

[@ka5kla]

Thank you for all you do

[@aaronmyers4951]

I would request that you reshoot the backyard comparison, except donwhat you did out front... Shut off the IR LEDs... Bet the image is brighter than the Reolink then... I can't believe you waited til itnwas out front to do that. That wasn't fair. I suspect the Amcrest will actually look better than the Reolink then. That's a starlight camera sensor, so unless you are in actual indoor pitch black the IR LEDs shouldn't be on in most cases. Possibly when it's cloudy. Would love to see. Already ordered an Amcrest IP5M-T1179EW-28MM. Going with Shinobi for recording and motion detection and alerts. Seems to be the best suited for the camera. Thanks for your comparison. Please redo the backyard comparison, except with the LEDs turned off on the Amcrest. Bet it surprises you.

[@digiblurDIY]

I actually did it but it wasn't that great in the backyard as it was super dark there. Not much of a comparison. I showed the results in my later video - kzbin.info/www/bejne/l6esq6WHhNB8b6c

[@jimbrewer5821]

Great video Travis. 👍 The low light performance was in a different league to other comparably priced cameras.

[@digiblurDIY]

I definitely need to see if I can get it working better in the dark back yard area. Want to stretch that sucker out..

[@margyjr]

Hi digblurDIY, love your Channel!, I hope you can help me, I am looking to buy this camera, Have you had any issues with uising this camera with Blue Iris sofar, as I have contacted Amcrest support and They said "We don't recommend Amcrest cameras with third-party NVR's and Amcrest NVR's with 3rd party cameras due to compatibility issues." what do you think?? Cheers

[@digiblurDIY]

I think they want to make more money off of you! 😎 Of course they are going to say that so they can sell you everything and support from end to end. However with that said you will actually find Blue Iris listed on their features and even support documents on how to use their cameras with it. I actually recommend Amcrest over others due to the flexibility of all the features and codec compatibility with many apps such as Blue Iris, Frigate, etc.

[@margyjr]

@@digiblurDIY Hi and thank you for your quick and helpful reply, Yes, that was my suspensions as well, I am using 3 Reolink cameras, (410, 420, IE Pro) and finding that blue iris is losing connection with them at times, and I have to use Reolink PC Client software to reboot them and then they connect again ? not sure why this is??, I can see the cameras in the PC Client so I know the cameras are OK, so I thought the Amcrest cameras might be a better camera and work with Blue Iris Better? Thanks again P.S. Please keep making the great and helpful videos!

[@jmb9377]

Love your informative videos, have been watching for weeks and getting ready to buy (probably) a complete NVR kit. I know you have a video where you review that horrible PTZ Zosi camera, but what is your personal opinion about an (on paper) equivalent 5MP POE turret NVR system from Zosi (~240) vs an Amcrest one with the same specs (~430)? Instinct is Zosi's quality/longevity must be lower to account for the price difference, but there aren't many high quality video reviews like yours for their cameras/NVRs. Do you have any opinions about whether the ~200 price difference is worth it, or not?

[@digiblurDIY]

I'm not even sure I'd accept a Zosi NVR for free at this point. If you want something cheaper, I'd stick with the Reolink NVR systems.

[@ughpizza]

This video was very helpful! Thank you!

[@digiblurDIY]

Glad it was helpful!

[@ramramboo]

Hi, is there a way to modify the 5MP Camera to secure it better like with the 4K Camera which has the set screw? Thanks.

[@digiblurDIY]

Caulking around the egde?

[@ramramboo]

@@digiblurDIY Interesting

[@patxx1167]

hello dsl for my english translator, i'm from quebec congratulations on your site, i want to buy a 4 camera kit but i'm a bit mixed up between amcrest t2499ew 2.8 mm and reolink b800, and also nvr or not nvr, what i like less in the amcrest camera is that the frame rate is just 15 fps compared to reolink which is 20 fps I would like to have your opinion and thank you again very interesting your video ;-)

[@digiblurDIY]

I probably wouldn't go with that older 4K dome myself, I don't like those glass domes due to various light glare and such. I prefer the turret style myself.

[@ramramboo]

Hi, what is the name of the first GUI interface that you are using to configure the camera, Is it Amcrest Surveillance Pro? Thanks.

[@digiblurDIY]

Most likely the web GUI on the camera itself?

[@ramramboo]

@@digiblurDIY Cheers

[@ristomatti]

Good review but you just happened to skim over the part I was most interested due to being frustrated from my previous Reolink camera purchase. I'd like to know which resolutions are available in the settings? The Reolink RLC-420 cameras that I bought a year ago don't go down to even 1080p, making streaming crappy from the location I have them setup due to mediocre 4G Internet. Thanks in advance!

[@digiblurDIY]

Here's the full specs, they list all the resolutions and even show the substream resolutions for SD viewing when bandwidth is limited. drive.google.com/file/d/12H8ymy7O1tEOskl8qBJxM_sWnGg37Ohn/view?usp=sharing

[@ristomatti]

@@digiblurDIY Thanks! On the Reolink camera substream was too limited if I remember correctly.

[@atinwoodsman]

Do you have the shutter speed and gain settings you use, night and day? What's 3dnr set at? Trying to figure out my setup. Thanks

[@digiblurDIY]

I think I had those at default during the video and just changed to color mode instead of auto.

[@700horses]

Awesome channel! Have you had a chance to review the AMCrest Turret 4K camera at night (with color)??

[@digiblurDIY]

I can give it a shot and see what it does. It doesn't have starlight though like the others.

[@teknet7283]

hi, thanks for the detailed video, i currently own amcrest ip3m model and looking to upgrade to their P8M-2496EB to get better clear view outdoor. whats the advantage of using the blue iris?

[@digiblurDIY]

Advantage over what are you using now?

[@teknet7283]

@@digiblurDIY i am now using ip3m-943 model camera im hoping ip8m-2496 will give better screen resolution and view

[@digiblurDIY]

Absolutely especially with starlight lens

[@f1catmancl]

You're mind you can't assign an fixed IP directly in the camera?

[@digiblurDIY]

You can do fixed IP or DHCP reserved without any issue.

[@shyamdevadas6099]

If you want to lock it so badly, shoot some silicone around the crack once it's aimed! I actually prefer it this way because it's tamper-resistant and reversible. If you want something more permanent, use epoxy.

[@BostonLoyalT]

Curious is this camera compatible with Reolinks 4K NVR setup? Or better yet what’s the best amcrest camera that Reolink customers could use that’s comparable with there 4K. Please answer. Just bought this setup with 4 cameras and for now looking to add two more to the system. Also YEAH would love to watch a tutorial video on how to hook these NVR systems with installing end clips on the cat5 or cat6. Great video btw been enjoying them a ton

[@digiblurDIY]

Yes, it should work as the camera support ONVIF and I was able to bring even 4K Amcrest cams into the Reolink NVR when I tested it before the install. There is a 4K 30 FPS Amcest that has the crazy night vision but no audio/sd card though. Great camera though! amzn.to/2F9wpSY I'll see if I can do a short little cat5e/6 video, I think it would be good for folks.

[@BostonLoyalT]

digiblurDIY man if I could’ve I’d pound that thumbs up 20 X’s! I really appreciate that. And hope you do make that video. I’m returning 2 reolink and 1 amcrest that I just bought to buy both cameras above and the E1 zoom & eventually gonna buy one of these ptz when there’s cheap deal

[@jacobwhite9431]

@@digiblurDIY just saw this 4k amcrest you linked. Had another question for you. Would either the 5mp or 4k be able to see cars that are driving by clearly at night? I installed a floodlight to use color with my reolink 4k but the cars always come out blurry unless they drive ridiculously slow.

[@digiblurDIY]

What FPS is it? As that does help to grab more frames. 30 FPS helps. For license plates a night that's a whole other issue and really a nice ALPR type camera meant for that is the way to go.

[@jacobwhite9431]

@@digiblurDIY the reolink is 20 fps. I wasn't necessarily trying to read license plates just needing see cars in motion clearly at night. If I were to get a alpr what would you recommend?

[@jacobwhite9431]

Hey digiblur do you know if amcrest cameras are compatible with the reolink RLN8-410-E nvr? Really need to add this to my existing setup.

[@digiblurDIY]

Yes I added a couple onvif cameras to the Reolink NVR before without any issue.

[@jacobwhite9431]

@@digiblurDIY awesome thanks! I love the reolink setup but I need something with color nigh vision. Guess I'll be adding an amcrest! Thanks again man love the videos.

[@woodcat7180]

How about to compare the Reolink E1 Pro vs Amcrest IP4M-1051. Very similar specs, but the Amcrest has RJ45.

[@digiblurDIY]

I'll have to take a look at that one. I'm looking for a simple little indoor PT camera I can hang from the ceiling and use POE on it.

[@lelandclayton5462]

@@digiblurDIY I can think of two from Dahua, one is a WiFi Camera 22204UENI-W and the other is PoE but has a huge base 12203TNI. Hikvision has 9 different ones to choose from that are Mini PTZ PoE Cameras that have a wide assortment of Lens types, Megapixels and such.

[@EsotericArctos]

The IR LED pattern looks better on the ReoLink, but that low light night vision colour blows the Reolink out of the water. I think in other tests Reolink and Amcrest are similar.

[@digiblurDIY]

Very much so! I'm thinking that's due to all the IRs the Reolink had.

[@EsotericArctos]

@@digiblurDIY Reolink does go a little overkill with IR LED's :). Still a hard choice in very low light, but that intermediate light area, Amcrest blows them away.

[@kevindavis7377]

@@EsotericArctos you can get a few IR fixtures and bulbs to make your camera to show better with NV if you don't want to have bright lights so no one will see the cams

[@EsotericArctos]

@@kevindavis7377 That is true. Reolink still performs badly with IR even with external IR lamps. But most people buy a camera for it to do the job without installing extra lights .

[@ramramboo]

Hi, will this Amcrest camera work with any NVR or do I need a NAS drive? Also can it record to NVR/NAS at the same time as the SD card? Thanks.

[@digiblurDIY]

Any NVR that can do RTSP will work fine. Yes you can do multiple sources at once.

[@ramramboo]

@@digiblurDIYThanks for the speedy reply.

[@PartOfTheExperience]

I just purchased an Amcrest (IP8M-T2669EW-AI) but the mount looks different. Any ideas how to mount it?

[@digiblurDIY]

That's the upgraded mount on their higher models. There should be a security bit tool. Loosen the screw a little and the mount pops open. Mount the ring and reverse the process.

[@tiaguerra4479]

Does it use app to view the camera and does it have event detection on the app

[@digiblurDIY]

Yes you can use the app and get alerts.

[@margyjr]

Hi, first I just want to say thank you for your great videos, I see Reolink are releasing "Reolink RLC-810A - 4K PoE Security IP Camera" in late december, I hope you can review it, as I am looking for wide veiw camera for my backward, under $150 AUS$, I seen your vidoe on the Amcrets 4K 8mp, but here in Australia it cost $195 AUS$, the Reolink has 97 dec of wide view, so I am not sure if it will be ok, I also saw your video on the Amcrest 5mp , your thoughts on 5mp vs 8mp wide view would help! P.S. I use Blue Iris to view and record my Cameras, Thanks again P.S I just seen tht the reolink has only 87 dec. ,so amcrest is my only choice???

[@digiblurDIY]

Actually I am working on that 810A setup right now. Going through a few tests and such. I mentioned it in my last comparison video. Can you get Dahua in your area?

[@Hashterix]

What's the difference between main stream and sub stream? Also if I have FTP configured, is it uploading to FTP as soon as it detects movement or will it finish recording a clip and then upload it once the event is over?

[@digiblurDIY]

Main stream will be full quality and sub stream is a lower quality low bandwidth stream. I'm not sure on the FTP one as I use a software NVR with it. I would suspect it has to finish the file before it can upload it.

[@Hashterix]

@@digiblurDIY Is the sub stream the one that gets uploaded for the sake of limiting bandwidth use?

[@digiblurDIY]

I would hope the main stream is default.

[@ramramboo]

Hi, I've heard that by turning off the notifications and back on again looses all your settings, is this true? Thanks.

[@digiblurDIY]

I doubt this.

[@ramramboo]

Ok thanks.

[@emf9]

Nice. Been looking for cameras. Do you have a preferred NVR? I was thinking about using my QNAP. But honestly, I'm just not thrilled with any of the options (particularly open source ones)

[@calebjpryor]

I use a qnap. Qvr isn't cheap per license. To keep recordings past a week you'll have to pony up cash too... Started testing running shinobi on the qnap in container station.

[@digiblurDIY]

A year ago or so I tried MotionEye, Shinobi, Zoneminder, and BlueIris. I really wanted to do the open source thing but I ran into issues and kept going back to BlueIris. So I finally snagged a simple little Windows box and run it bare metal. It's been working great so far.

[@emf9]

@@digiblurDIY Yeah.... I was thinking about standing up a Windows VM in my proxmox server for that. I really wasn't impressed with any of the open source options.

[@digiblurDIY]

If there is a way to pass a GPU to it then that will help out quite a bit with resources.

[@emf9]

@@digiblurDIY there is if you have extra gpus. For example I have a Quadro p400 I pass through to the VM running plex

[@mbord169]

How did you remove the amcrest logo from bottom right of screen? When I go to overlay it only shows to remove date and time stamp..no logo removal. Im using amcrest nvr not web based

[@digiblurDIY]

Look for watermark settings on the main video settings page. Uncheck.

[@mbord169]

@@digiblurDIY dont have video settings page

[@mbord169]

through web or on nvr

[@mbord169]

@@digiblurDIY only have overlay for time stamp and channel display...no logo

[@digiblurDIY]

It's in there somewhere in the video settings page on the camera GUI. Watermark is the name. I have the Dahua firmware on mine now so it might be a different location. I checked one of my other amcrest cameras and it was there.

[@lelandclayton5462]

FYI, if you use the Dahua variant of these DHCP is disabled.

[@digiblurDIY]

Nice tip! I downloaded the firmware but didn't have time to flash it yet.

[@digiblurDIY]

Finally flashed the camera with it. Went great, I did do a factory default and noticed it went to static IP like most Dahua seem to do. Easy to reset it back to DHCP though. Thanks for the tip!

[@shadow.banned]

Good test.

[@digiblurDIY]

Thank you!

[@TheHellis]

What happened with the sound in the pcbway advertisement?

[@digiblurDIY]

Compressed it a little.

[@CTTH100]

Do they have tampering/offline alerts or notifications?

[@digiblurDIY]

Yes

[@CMK-Security]

I really would Like to See a review of a zxtech 12mp Poe camera. Available on eBay, Domar Security Website, Amazon, and the zxtech Site itself. Hope you Cover this. 👍😉

[@digiblurDIY]

I will check it out and wow 12MP...

[@CMK-Security]

@@digiblurDIY yup. Seems to be pretty much the "King of Hill" with even a decent Prince compared to my rlc 520. The zxtech claims to do 8mp with Solid 30fps! No other Poe camera can do that. Maxed out 12mp at Solid 20fps on a 4000x3000 Resolution is crazy. This should be one interesting device for its small size. They have 2 Models. One is with motorized Zoom and 60m! Nightvision... The other one "Standard" 40m. This is the one i would Like to See in a Video before i Order something from the UK. 🙄 However in Terms of night vision (backyard of a house) a hikvisions color vu seems to be pretty much the best Image you can get... Heard though that these hikvision cameras are not durable for a Long Periode of time, terrible Support, offen faulty on recording, and a pain in the🙉to Set Up... Soo you might give that 12mp a try?

[@macster1457]

When I try to add the camera to the app and scan the QR code it tells me is invalid.

[@digiblurDIY]

Amcrest view pro?

[@ronm6585]

Thank you sir.

[@digiblurDIY]

Most welcome

[@theironcobra89]

20:30 those shorts. absolute boss

[@digiblurDIY]

Too hot for pants in these parts!

[@jefffrilot9667]

Did you try the Dahua firmware?

[@digiblurDIY]

No, I haven't yet. Do they have one for this camera? I haven't looked yet.

[@digiblurDIY]

Will check it out!

[@dxdux]

How do you flash the firmware?...I just bought this camera (still in transit). I have a Dahua nvr and I am planing on connecting this camera directly to it (no poe injector) Can I still flash the firmware?, thanks in advance.

[@digiblurDIY]

You just send the bin over via the GUI. Pretty simple.

[@digiblurDIY]

Finally flashed the camera with it. Went great, I did do a factory default and noticed it went to static IP like most Dahua seem to do. Easy to reset it back to DHCP though. Thanks for the tip!

[@MrEye4get]

Why do POE cameras still require a power plug? What's the point of running LAN cable and still need to run a power cable to each camera? Why not just use RG6 instead?

[@digiblurDIY]

They don't. It's an option for folks that aren't doing POE. Maybe they are using a WiFi backhaul across property or something. I haven't seen any IP cameras use RG6.

[@tiaguerra4479]

Does the camera zoom in

[@digiblurDIY]

Not via optical only digital. Wrong price point for varifocal cameras.

[@cheloautomation4994]

Hi there, I got one of this, configure it and added it to HA the same way you did, but I can't get the camera to show me the image on the UI, I follow all the steps and nothing. Now on the browser nothing work, no view live nor when you click on it, on the HA app in android, the view live doesn't work but when I click on it, it does open de camera live view. Any help will be appreciated! This is my current configuration: gist.github.com/cheloautomation/c2dc00b0af02fac54fd941721cfebac9

[@digiblurDIY]

Do you have the stream component enabled?

[@cheloautomation4994]

@@digiblurDIY yes I do. This is what I have in my configuration.yaml: ffmpeg: ffmpeg_bin: /usr/bin/ffmpeg stream: amcrest: !include amcrest.yaml

[@digiblurDIY]

Is the camera in h264 mode?

[@cheloautomation4994]

@@digiblurDIY let em check on that!

[@cheloautomation4994]

@@digiblurDIY that was it!!! It was on h265! Changed it to h264 and it is working like a charm! Thank you soooo much! I was considering to return it! Not anymore!!!

[@jonathanwoodard1204]

Did you ever change the firmware to the Dahua? Remember it adds a few extra things that Amcrest took out. I have included a link to the firmware I got to work. files.dahua.support/Firmware/Kamery%20-IP-%20sta%C5%82opozycyjne/LITE265-S2/DH_IPC-HX25%288%29XX-Molec_MultiLang_PN_V2.800.0000000.15.R.200313.bin

[@digiblurDIY]

i didn't yet as I heard it doesn't come back as DHCP just yet and I didn't see a firmware to go back to Amcrest yet. I might need it for comparison but tempted to do it and compare too.

[@jonathanwoodard1204]

@@digiblurDIY When I flashed the 2 I have it stayed DHCP so I believe it keeps the settings from the previous amcrest firmware. Honestly, I've got 16 cams total and 12 i've moved to Dahua without a need to go back. You mentioned the 4 motion zones.... the Dahua adds tripwire and intrusion as well (IE: Region A ->B, B

[@digiblurDIY]

Will give it a shot when I get a minute to do it.

[@dxdux]

How do you flash the firmware?...I just bought this camera (still in transit). I have a Dahua nvr and I am planing on connecting this camera directly to it (no poe injector) Can I still flash the firmware?, thanks in advance.

[@digiblurDIY]

Finally flashed the camera with it. Went great, I did do a factory default and noticed it went to static IP like most Dahua seem to do. Easy to reset it back to DHCP though. Thanks for the tip!

[@xisigma]

What prevents someone from just unpopping the camera and walking off with it? Why are the mounts so flimsy? Feels like companies are making them easy to steal to sell more cameras

[@digiblurDIY]

In that case you would need a vandal resistant one.

[@Steve-oh9tu]

Are you worried about a hurricane blowing that camera around?

[@digiblurDIY]

or just a random storm actually.

[@Steve-oh9tu]

@@digiblurDIY , It would probably take about 100+ mile per hour wind to move that. It doesn’t have much wind resistance.

[@idontwantachannelimjustcom7745]

Have you ever seen a camera that only wanted to accept an ipv6 address?

[@lelandclayton5462]

I've yet seen a IPv6 IP Camera, let alone I really haven't looked. Typically IP Cameras will be adopted to a standalone Network to a NVR's Plug and Play ports.

[@digiblurDIY]

Same here, I haven't seen that either.

[@Nealio6s]

Is he really using a string trimmer in flip-flops?

[@digiblurDIY]

Doesn't everyone? Mowing the grass bare foot is very therapeutic from what I hear.

[@nexes-forty-four2381]

@@digiblurDIY Singing: " ... and every Saturday I work in the yard; I pick up the dog dooo... i hope that it's hard. Life's been good to me so far "

[@Nealio6s]

​@@digiblurDIY I'm too worried I'd cut up my feet.

[@digiblurDIY]

You learn quickly. Just like keeping your shoes out of the lawn mower. All jokes aside I usually wear shorts doing it due to the temperatures in the south US but usually have shoes on. I think I was just snagging this small piece of trimming that day.

[@nexes-forty-four2381]

first

[@calebjpryor]

Weed whacking in shorts and flip flops... Gluten for pain? Or leg hair of armor

[@digiblurDIY]

Dodging the little pieces of string like no tomorrow.