New Chain Install On Our Coleman BT200X

[@BustedKnucklesBuildsTexas]

👍👍

[@fanofoldfans9238]

Hey Nic, you make that chain breaker look easy. I had to put a pipe wrench on mine to hold it in place . I need one of those sprocket alignment tools for my MB 200-2. Try a 45 or 47 tooth rear sprocket. Cool

[@nicsminibikes]

These alignment tools are pretty cool they help out a lot. I'll edit the description and throw a link in there for u! I got a 60 tooth on it now. I have a 50t and a 40t I think we're going to try the 40t out and see how it does.

[@fanofoldfans9238]

@nicsminibikes i put a 40t on my mb200-2 and bumped up top end to 60mph with a built 224, then I ran out of room. Plenty of low end torque.

[@Deucealive75]

I have that same thing with the 224 and 9/60 gearing. It's just too much but works great with a milder engine. Earlier this year I had a stock 196 on it with a VM22 clone and the stock 224 muffler. Was a great combo that was more fun and easier to ride than with the 224. Let us know if you like the chain or not. I use RK chains but was thinking about trying something different.

[@nicsminibikes]

This chain stretched a lot at the GPS180 race. It didn't break but it stretched alot

[@nicsminibikes]

Ya it's a fun combo but this 224 is a beast. I need more power to get it to settle out and not stand on the front end.

[@POSminiracer]

What does that bike top out at MPH wise with that gearing?

[@nicsminibikes]

I haven't checked the top speed in awhile. With a 50t on the back we were hitting 60mph so with a 60t on there we should be a little less.

[@miguelpagansr6128]

Hei nic, I noticed you have a comet belt. Would that belt work on a mega moto 212 pro with a tillotson 212? If so a link for the belt please.

[@nicsminibikes]

Takes a little measuring to get the correct belt but it isn't to hard. This link will help u get the correct belt for ur set up. www.gokartsupply.com/mobile/tcbelts.htm