New Clamps for my New vise part 3 , Finished

[@davebarcelon]

Those clamps look great your one of my favorite machinists !!!!!!!!!!!!

[@EverettsWorkshop]

Mats is a top-notch guy, he's been very generous and supportive of me and my channel as well. And if I ever get to shake your hand in person please be gentle, that's one wicked grip you have to break parts out of solid bar, lol!

[@TrPrecisionMachining]

very good video...thanks for your time

[@ianbertenshaw4350]

Nice work mate ! Those clamps will prove more useful than you first thought - move one set away and you have a pre trammed stop on you table that can assist with setting up angle plates , dividing heads and much more ! Definitely have to make a set for my mill ! Thanks for the very enjoyable videos Ade !

[@basharalngar1567]

From the depths of my heart calling God that protects you from Corona

[@samrodian919]

Nice job Ade! On the subject of breaking out the table by jacking up with the treaded rod going through the tee nuts , Mr Pete , Lyle Peterson, has a video of I believe a German made rotary table that has lumps broken out on the tee slots and he said he was sure some " bubba" had jacked the slots out by bottoming out a bolt through the tee nut and that the sets you buy should not let the suds or bolts go through the nut. I checked mine and he was correct, they don't let the studs go right through. Stay safe Ade and your loved ones. I too am in lockdown in my shed here in Essex as I am in a risk category as well.

[@jrgenneess762]

I looked at my keyways an yes my bolts go thru the not

[@cumbo5782]

The 50mm carbide tipped cutter you have i had same issue.Put these inserts in and it came to life only £6. Drillpro 10pcs APMT1604PDER-M2 VP15TF 25R0.8 Carbide Inserts for Mill Cutter CNC

[@fredcreer1929]

Good idea. Now to steal it. Like the repeatability and for other uses. I for see a pallet sitting nicely on there.

[@colinmcmillan2642]

That's a scary strong grip you have there Ade!

[@kenthaworkman5958]

Hi Ade. Very nice clamps. Outstanding. Thanks for chairing.

[@jonsworkshop]

Nice job Ade. You can now make a square/rectangular plate (1/2 inch thick) that bolts to all 4 base blocks that has a centre spacer underneath the same size, use as a fixture plate (full of tapped holes) and if you find a slim 3 jaw you could fix to it for round stuff etc. Totally universal. Well done again, great idea. Jon

[@charruauno386]

Thank you for sharing professor Ade, you as always did a very nice and practical job. Have a nice day.

[@Dave.Wilson]

Nice job with the vice hold down clamps you made, turned out good. You'v been watching to much "This Old Tony" haven't you with your metal cutting!!.

[@garyc5483]

Nice job Ade. Should work a treat. Stay safe stay well. regards

[@johnnason7019]

The rectangular part at 2:20 is a height gage adapter that comes with a last word indicator (at least that where mine came from), the rod with the 45° slot at 3:30 is a holder for radius gages and the like.

[@kailibxanitoez3528]

I have the same. And know 3 others that do. it was standard for that indicator.

[@andy6359]

What a wonderful system. Thanks for showing us. Really appreciate you taking the time to put all these videos up.

[@ronaldnickell6110]

The tool with the little slot on the end is for holding small scales to measure in recessed areas. The holder is also good for holding radius gages.

[@donaldnaymon3270]

Nice work ades. Looks great and work well. Thank you for sharing

[@RagsdaleCreek]

Really gonna work out well . Nice build for the mill.

[@paulthomas3782]

Well done great set of clamps thanks for sharing.

[@canalboating]

Great Job Ade, I particulary liked the way you ripped those four pieces of stock off the bar :)

[@can5projects563]

it's like Xmas. ADE love your videos

[@woodysworld3765]

Thumbs up on your new tee shirt.

[@johncornell13]

Thank you ADE, like you mate I see isolated a couple of weeks ago for preventative reasons as I am in the realms of being a high risk person, so thank you for you’re vids and stay safe. Johnny in Oz

[@Jestey6]

Hi Ades Thanks for the videos, they are really appreciated in these self isolating times. Sitting back with a cuppa and watching you takes my mind off the difficult times we find ourselves in. Cheers Noel

[@eyuptony]

Enjoyed the video Ade great looking clamps. I like the idea of the stop blocks which remain on the table to square anything else up against.

[@kimber1958]

Excellent job on the clamps thank you so much for the mention in your video in the link to my channel

[@TedRoza]

Excellent 3 part series .... your doing a great Meticulous job ... Thanks for another good Video

[@gagasmancave8859]

Nice one Ade great little project to make use of the mill . your luck your at home with the workshop i am 100 miles away in London the wife's a bit paranoid so i am stopping down here for a cpl of weeks months lol keep the content coming as its keeping me sane apart from my rediscovered love of airfix kits Nigel

[@melgross]

This Old Tony strikes again!

[@gordonmoore1838]

Excellent solution. Must try AmazGoodBay for a set of Cut Off Square Up Appendages as used by you to get your initial four pieces! 😃 Thank goodness for those of us lucky to have our home machine shop's where ever we are in the world. "Sorry missus, best I keep my distance, I'll try and keep myself sane in the shed!" 😂

[@markedevold1261]

Hey Ade, love your videos. I’m make a new set of clamps for my 5” vice, mine will use pins in the vice holes. An idea to consider, I mount my vice on the end of the table, leaving a fair amount table space for other fixtures of clamping directly to the table. Occasionally I swap ends to even out ware on the ways. Keep the videos coming, I’m under a shelter in place order in the state of Minnesota, USA.

[@sharkrivermachine]

Very well engineered project, nice work.

[@joeduda8507]

Thans Ade seems like your new mill is working great and nice nuts and clamps

[@bostedtap8399]

Great vlog, nice set-up on the inspection vice. Stay safe all and thanks for sharing.

[@TidyThreads]

Nice work Ade ... I need to make some vice clamps soon

[@antonyevans7547]

Nice clamps .👍

[@bobwilliams7343]

Nice job ADE I wonder if you could put some jacking screws in sideways or is that a step to far

[@davespringate5469]

Hi Ade great video as usual, just been back through them all to see what size vice your new on is. It seems to fit that table near on perfectly. Could you put up a link for the Vice ?

[@BedsitBob]

Since the vise is pivoting on its centre point, the adjustment should be half the error, eg. if the error is 5 thou, adjust it by 2.5 thou.

[@nikond90ful1]

Thanks for the video Ade.

[@billofalltrades1468]

Well done! Nice job

[@algolagnic5290]

Aid can you please bolt the mill down I feel seasick every time you traverse the table lol

[@grntitan1]

The second Starrett tool is for holding small scales(rules) and taper gauges. Usually came with the set of small scales or taper gauges.

[@devster52]

also for holding radius gauges and sometimes included with them.

[@3cx71]

It looks like the holder for a last word indicator for fitting it in a tool holder in a lathe

[@andyb7963]

This old Tony teach you to twist metal off like that?

[@jrgenneess762]

Hi Ade can you please tel my where you got the vise from.

[@kimber1958]

Radius gauge holder. You slip your radius gauge in

[@kimber1958]

Taper gauge

[@graemebrumfitt6668]

Hi Ade, I think when you took out the vice then put it back in it clocked up better than the first time. TFS, G :)

[@BleuJurassic]

royal mail you can print the address and postage with the code they give you its easy all you need is a scale in grams and size of the envelope, give a machinist a dial gauge and a problem it will keep them happy for hours. Giggles

[@markowen7164]

Well I bet he will want all that stuff back soon. M

[@KOSHHCampaignUK]

Hi Ade, I am the admin for a campaign channel, trying to save our two local NHS hospitals from being downgraded - something which you no doubt know all about with the case of Withybush? Totally nothing to do with our campaign, but I too am a hobby machinist, and I've been enjoying watching some of your videos during isolation etc. and would love to send you some of our stickers for your sticker-board. Would that be ok? If so, please email me at [e-mail] and I'd be very pleased to pop some in the post to you. Keep making your engaging content. I'm learning a lot!