New coleman b200R minibike

[@astrosmith6313]

Me too bro 41 first brand new toy ever bought in my life it's my stress reliever

[@UgaDawg-p6m]

Yes, Got one for my son for Christmas, Headlight is crap, but that is not a deal breaker, Runs good, almost time for the first chain tightening.

[@JGsgarage_unboxings]

I really enjoy this bike. Be careful with the chain adjusters. They strip extremely easy. Like no joke.

[@ILiveInAVanDownByTheRiver]

I didn’t even know harbor freight came out with the ghost until you mentioned it. That’s cool as hell.

[@tylerbuilt_chevy_tough5163]

Autozone has a 7 inch light bar and it fits perfect as a replacement of the stock one i just bought a b200r and replaced the second day it makes a huge difference and pretty much direct fit and wire it up good to go. Also i bought just a little red led for the rear and it works great as well i wired it up the same to the same wires for the front light

[@sonnydukes]

Greetings, After watching your reviews, I purchased 1 of these for my grandson & 1 for myself (I'm 56yrs old). Can you tell me what method of governor bypass you did in your other ridding videos? Your ridding videos were great.

[@JGsgarage_unboxings]

kzbin.info/www/bejne/d2K0mKSBmMicocksi=g-r4H9hqn92pmNbW this is what I did to it. Hope this helps. Don't make a new hole at the end. Only move the spring to the outer most hole. Or it will rev too high

[@stevt100]

I'm a 68 year old and been widowed almost 3 years now and I bought myself one for Christmas

[@JGsgarage_unboxings]

@@stevt100 that's awesome. Hope you enjoy it. Ride safe

[@chevy0771]

Did you have a problem on the engine? I just bought mine brand new from tractor supply today and it’s acting like the engine is seized up. I can’t pull the cord to even start it at all

[@JGsgarage_unboxings]

Damn. Did you do anything to it at all? If not take it back. My engine kinda sounds clunky when I shut it off. But I'm in the middle of building a predator for it now

[@brandonbrock919]

I've owned one for about a month now and fell in love with it I just put a stage 1 kit on it

[@JGsgarage_unboxings]

I really like mine too. I wanted one my whole life. And here I am at 42. I'm going to be building a predator for it hopefully soon. Stay tuned

[@LiptonIceTea0]

where do you find parts for it?

[@JGsgarage_unboxings]

@@LiptonIceTea0 go power sports .com or omb warehouse

[@WeAre-ni6ql]

i just got one also, keep us updated on your progress.

[@JGsgarage_unboxings]

I will. I have a playlist started for it already

[@jakelang4387]

It's funny evey store I went to that had them ..there was something wrong with them..stores had no management..so picked mine up and enjoy it

[@23ninjamaster]

hey man, i just got mine yesterday! Any advice now that you have had it for a couple months?

[@JGsgarage_unboxings]

Seems like a solid bike. My only advice so far is be careful with the back chain adjusters. The metal they use is terrible. They strip extremely easy.

[@ss311kid]

Weed your foot pegs... 2nd bike weak AF. Coleman is *icking me around... any way 185

[@capical3764]

yo the headlight isnt that bright is there any way to maybe make it brighter or like a better headlight

[@Babymexico502]

it lights up more when u give it gas

[@TennesseeMotosMining]

Got a ghost in my bt200 with a torque converter and billet flywheel currently get to 50mph. Though… I may be swapping that engine for a dirtbike engine soon so I can have manual gears and I may cut the frame and fabricate a swing arm,shock in the rear so I can have more fun off road.

[@Wickedkooll]

You should get higher speeds than 50 mph with the governor out of a ghost and a torque converter that is pretty sweet though

[@stevenbrown1798]

Take the governor off. Will you blow up the engine?

[@JGsgarage_unboxings]

I have a new video and a completely different engine. I took this one out. It's only got 1 hour on it

[@JGsgarage_unboxings]

Not necessarily. The stock flywheel is rated for like 6000 rpm or so. You can remove the governor but you should keep the rpm's low until you get better internals for the engine

[@Tampaboys]

Heck ya those are cool bikes can’t wait to see what you do with it bud

[@JGsgarage_unboxings]

This bike has exactly 1 hour on it. And this week I'll probably be doing a video on an engine build for it

[@sleepytimeshecomes]

it's cool to know what this guy is gonna do with this bike.

[@JGsgarage_unboxings]

Have you seen my engine update video?

[@cadencramer2747]

Do you happen to be in California? If so where did you buy it?

[@JGsgarage_unboxings]

Im not in Cali. I got it from tractor supply.

[@maddogg3415]

Tractor supply right now has them for 599 that is a good price

[@itakedogz]

We you break it in it would be awesome if you could make a vidoe of how to take the governor off because i just got one and im not to sure on how to take off governor's.

[@JGsgarage_unboxings]

kzbin.info/www/bejne/d2K0mKSBmMicocksi=h9Ys7ubCB-nMDj-m click this link. I've done this to it the other day and it really does wake it up. However I didn't drill the last hole. I only moved the spring to the outer most hole. So the governor still works but it pretty much waits till the end. So the engine doesn't/shouldn't get damaged.

[@jakelang4387]

Just turn the screw out was all I had to do

[@Hustlersylent]

Are the fenders metal or plastic?

[@JGsgarage_unboxings]

Plastic

[@raymonddurkin]

I thought this was the new CVT with front disc brakes? I don't see any front brakes on yours.

[@JGsgarage_unboxings]

I know Coleman makes several different models with all different features. This only has a back disk and still has the jack shaft.

[@raymonddurkin]

@@JGsgarage_unboxings you're right, looks like Coleman is starting to release the new version but it's not in the northern areas.

[@Atv_Donut]

@@raymonddurkinme and my brother both got one and they are so fun lol

[@LIFTLEGIONCOM]

What’s the difference between the B200 and the B200R??

[@dont7995]

R200R has front disc brake and torgue converter.

[@GtFivehundred]

​@dont7995 thanks. Tractor supply has an unbelievable deal on this for $599. $200 off

[@RSGLOL13]

is there a way to rev it without going??

[@Swaggy-Seal]

The CVT transmission is always engaged, no neutral.

[@RSGLOL13]

@@Swaggy-Seal so just jack it up and do it that way? i crashed couple weeks ago and want to get the fuel and stuff running so i dont have to fix it when im back on

[@Swaggy-Seal]

@@RSGLOL13 yea that works fine, or you could disconnect the chain that drives the wheel and it won’t go anywhere

[@robertwaddell7532]

☀️ hello - whats the difference between ur Coleman b220r mini bike and a Coleman b200c. Mini bike ??

[@JGsgarage_unboxings]

That is an interesting question. I looked it up and it really does look identical. The only thing I don't know for sure is. Mine for a fact has a jack shaft. I don't know if the b200c has a torque converter or what.

[@djkittenblood]

Is there a way you can make a video on how to remove the governor and change the oil

[@JGsgarage_unboxings]

I actually just finished my new predator engine. And didn't record anything. But if you head over to red beards garage. He has a crap load of videos on gov removal. That's where I learned it.

[@djkittenblood]

@@JGsgarage_unboxings Thank you, he even makes videos on governor removal for the b200r? I can’t find any videos online, or are all the engines similar

[@JGsgarage_unboxings]

@@djkittenblood the b200r engine and the predator are identical. If you can do it to a predator, you can also do it to the stock engine. Exact same process.

[@djkittenblood]

@@JGsgarage_unboxings Wow i really didn’t know this, just got my mini bike a week ago, thanks for all you info ! Def leaving a sub

[@JGsgarage_unboxings]

@@djkittenblood no problem and thank you. Just for fun, go on Google and find "omb warehouse.com" you can find lots of parts for your engine. Yours is the 196cc engine.

[@antmothirteen6540]

Couldnt help myself. Bought one yesterday!

[@JGsgarage_unboxings]

Hope you enjoy it. I'm almost finished with my new engine. I'll be doing updates soon enough

[@logansinclair2658]

I unscrewed the screw most of way how else could I add more speed to this?

[@diepunk]

Normal 212 predator with stage 2 would probably be the same for less money and bout same performance as the ghost

[@JGsgarage_unboxings]

I actually went with that idea. The predator is almost finished. Just need the flywheel and valve springs

[@diepunk]

@@JGsgarage_unboxings hell yeah, hopefully theres an updated video! Did you have a speed test on stock engine?

[@JGsgarage_unboxings]

@@diepunk no speed test. But I do have a tachometer hooked up. Stock it would only go 3800 rpm. After I moved the spring position to the outermost hole I got over 5000 rpm. But it don't like it. I'm aiming for between 7-8k rpm. There is a sneak peak of the engine in my community tab if you want to check it out

[@n8iveskin473]

i have a b200...not the R version that you got...mine has a torque converter though...and that plate on it is black...not red

[@JGsgarage_unboxings]

I'm throwing around the idea of a torque converter. But I do like the reliability of the jack shaft. Does the b200 have front suspension? They make too many models in my opinion

[@n8iveskin473]

@@JGsgarage_unboxings yes the B200 has front suspension...but the B200 RSV is supposed to be releasing this year with full suspension...

[@JGsgarage_unboxings]

@@n8iveskin473 sweet. I'll have to look into it. These things are addicting lol

[@n8iveskin473]

@@JGsgarage_unboxings I also have a Harbor Freight Predator 212 in mine with an upgraded carburetor and jet...she is a beast

[@JGsgarage_unboxings]

@@n8iveskin473 I just did a video about 2 weeks ago. I did an unboxing on a predator 212

[@DAVID2DOIT]

Why my pullstart pulling back?

[@JGsgarage_unboxings]

Did you tear anything apart? Or did it just start doing it out of nowhere?

[@618Hellbilly]

Lol I'm 47 and have never bought anything new myself. But I bought this for my daughter.

[@JGsgarage_unboxings]

You might as well go back to the store. Cuz you are going to want one now. I love these things

[@tjatkinson88]

I'm 59 and got one to ride the grandkids on

[@JGsgarage_unboxings]

@@tjatkinson88 and that's awesome! I still ride mine to the store almost every day. They are soo much fun

[@astrosmith6313]

Check us out 513 Ciniy Mini bike life

[@JGsgarage_unboxings]

Subbed

[@andrewsnyder3103]

Can you show use how to remove the governor

[@JGsgarage_unboxings]

kzbin.info/www/bejne/d2K0mKSBmMicocksi=H5kOLt__lz3-pjbr I probably can once I get that far. Click this link. I've done this the other day and it really wakes it up. But keep in mind. I didn't drill the last hole. I just moved the spring to the outer hole. The governor still works. But it waits till the end and keeps the motor from hurting itself.

[@andrewsnyder3103]

@@JGsgarage_unboxings thank you

[@JGsgarage_unboxings]

@@andrewsnyder3103 you're welcome.

[@Deucealive75]

@@JGsgarage_unboxings I think he made a mess out of the linkage but at least he understands how it works where most guys do not. The small Honda spring he mentions works fine with the stock Coleman return spring. The Coleman return spring needs trimmed down to where it is fully relaxed when throttle is at idle. This way nearly all of the bind is removed. Removing the governor on a stock engine is what amateurs do. Governor removal should only be done during an engine build.

[@JGsgarage_unboxings]

@@Deucealive75 when I build the predator I'm completely removing the governor. all upgraded internals

[@jermaineclayborne9198]

Headlights worth of shit but good bike

[@JGsgarage_unboxings]

I agree about the headlight. I love the bike

[@jakeresins]

Just got mine from tractor supply and it doesn’t start 🥲

[@JGsgarage_unboxings]

@@jakeresins don't take this the wrong way. But did you turn on the gas? And choke it? Also is the kill switch on. Also make sure the sparkplug wire is attached. When I bought mine there was gas already in it. And it was getting stale.

[@jakeresins]

@@JGsgarage_unboxings yes gas is on, and choke is on too. Also kill switch. But I haven’t checked spark plug wire

[@jakeresins]

I put new gas too

[@JGsgarage_unboxings]

@@jakeresins open the air filter box. Spray just a little bit of starting fluid in there ( too much could cause a major accident) and try to start it. If it starts then dies. You are either not getting gas or one of your carb jets could be plugged with something.

[@JGsgarage_unboxings]

@@jakeresins also. If it don't try at all to start. Then you aren't getting spark