Coleman B200 mini bike governor removal and top-speed run

[@billwilliamson9842]

fastest and first!!!!!!!

[@jamesgravel7755]

I just rediscovered mini bikes just a couple of months ago and it’s the only hobby I ever had my wife doesn’t care about at all. You must have the same luck. Lol

[@samsnephew3209]

It is an addiction 100%. Black66 got me started with his experimenting and informative videos, I am satisfied in stage 2. Aluminum flywheel, header pipe, mikuni VM22 26mm carburetor.

[@johnspartan5515]

Luckily my wife loves mini-bikes, as we have 10 acres of pasture/farmland, and we load them up to take camping down here in Florida!👍 Axis M200 for her, and the Coleman B200 for me. I'm 50, and those things have improved our quality of life tremendously!❤

[@King-ru9ve]

Stop acting subordinate to your wife. You’re the Man of the house; you can have whatever hobby you please.. I wish my wife would tell me I couldn’t do something productive..the nerve..

[@jamesgravel7755]

Fuck that. She can bitch all she wants. It don’t change my plans. She learned. But she still bitches about stuff. Doesn’t mean I don’t do it. Lol but mini bikes? She hasn’t had a single gripe. Snowmobiling. She would bitch every time I left for the weekend. Drag racing. Furious when I went to the track. Guns. Hates em. But mini bikes she’s been quite. Lol

[@ToGrimmToWin]

Showed my wife as we're about to move and put new house area is really good for these with woods I can go into behind the property and these would be great for it and cheaper than gulf carts or side by sides

[@aaronosb7787]

I just got one yesterday and I've been wanting one since I was a kid and I just turned 40 and about to live my childhood dream

[@xClyptox]

Man that red really POPS on those bikes.

[@RodneyPittman-mf8ec]

You’re the minibike master

[@jamesgravel7755]

Mini bike godfather

[@eyehearther111]

That's a nice looking bike. The reds badass.

[@NubsWithGuns]

Neat bike. Looks like a great alternative to a MM212 if one can't or doesn't have the tools to put a bike together. Really looks like my bike in red at first glance, there is a kink or 2 extra in the frame on these if you look at the front in the frame. Love that shade of red also.

[@EXPEDITIOIN]

We bought 2 B200RSV's. They will do 36 stock. Love em!

[@TwitchScytheTP]

are they really that fast stock i just got one

[@faroutgolf3650]

I love your passion it's an addiction, no doubt a feel good one...

[@hellheart1993]

Awesome gain of speed

[@heavyd5670]

Awesome collection! You should do scrictly a 196cc build, like without swapping it with a predator etc.

[@Black66]

Yes , good idea!

[@johnspartan5515]

I have both the Axis M200, and the Coleman B200 rsv. I love them both, but each with pros/cons (stock). I do most of my riding on our 10 acres, so the Coleman seems to have way more torque and HP vs the Axis, but the Axis has better tires (knobs, not v-tread) for trail riding, and softer suspension. The stiffer suspension on the Coleman about beats this 50 year old army vet to death!😂👍 If I could make a hybrid, the tires and suspension on the Coleman with the better performance, would be the perfect bike for me.

[@Throttle_junky]

I have the Coleman b200 similar to yours and I have a 212 predator with chain on left side and also have a jack shaft I have added a header pipe. removed the carb I believe I purchased the wrong carb which was a stock carb with jet screw and dirt bike carb is needed. I have a 60 tooth on the rear I believe and stock 10 tooth sprocket

[@eyehearther111]

Mini bike withdrawals 😂😂😂 I'm dying laughing

[@andrewkuhtz]

Love the color! Nice looking bike!! Interesting governed speed, my mm212 all stock with a bone stock hemi 212 goes a little over 41mph…like i mentioned before you should fit a 274 Duromax on there and do a build series on it👍

[@isaacbrown511]

Ever since I seen these b200s come out I've wanted one

[@tylerstrong1776]

I just got one and love it! The first one I got, though, I had to take back to tractor supply bc I crunk it up, and it had a bad knock in the lower end of the motor in the front area of the engine. You could really hear it when idling or giving it gas. She said thankfully you brought it back bc it was about to lock up completely she said. She said they may not have shaved the pistons down enough or something. She seemed to know a lot about mini bikes lol. This is my first. I've worKed on vehicles my whole life, so how hard can they be to work on, lol. My cousin got one, so I had to go get one myself! They're on sale rn at tractor supply from almost 1k down to $649 !!! So the time to get one is now if you want one. The second one, I got in the box still and had to put the front tire and handle bars on, and it's been running great. I think I just happen to get that one lemon.

[@dylanbenker2043]

@@tylerstrong1776649 for b200 not b200r?

[@dabosssr24]

My b200 is a little different than that one. Mine has jackshaft plate like the previous colemans instead of torque converter, different light than yours and no front brakes. Also noticed my side plastics are a little bigger. Coleman must offer a couple different versions of these

[@Black66]

There is the B200RSV which has front and rear suspension with a torque converter. The B200R has front suspension with a jack shaft and then the B200 which has front suspension and a torque converter . and a couple of sub models.

[@Callofdutyjoey]

@@Black66yeah they even have another different model like the b200c but it’s just like the b200rsv I’m pretty sure

[@Callofdutyjoey]

@@Black66I’ve got the b200 r also with the 196 on it and chain driven jackshaft, got it to go 24mph from the factory and removed the governor screw and got to 28mph. After all that I switched it to straight chain with the stock 10t clutch on front and 50 out back and got it to do 45mph on the street and 50mph on a fairly steep downhill. More mods to come for it soon like a header pipe and probably full governor removal and a different carb because the stock one has no bolt on the bowl to change the jetting. That’s a cool bike you’ve got there along with the rest.

[@piratex90]

loved the video! super helpful just a quick question what size bolt was that for the hole u removed the governor?

[@Black66]

Thanks! Check out the B200 playlist. I used a 1/4x20 bolt in the governor arm hole.

[@stuffforfun4304]

What did u put on the black screw 5:16

[@billwilliamson9842]

I'd love to see a video where the secondary/driven gets tuned on a stock bike like this, maybe with a camera mounted on the driven to see when it makes the shift from "low" to "high" and at what mph and rpm this happens. Then use another hole for the drivens spring and record the 0-30 and top end times to see if this changes at all. Maybe even get the drill out to find tune the secondarys spring location even further. Like to see that done on a stock cam bike and then maybe add a rod/flywheel/carb/cam/juggernaut and fine tune the driven/secondary for the higher rpms to show any gains. The tuning of the juggernauts stall with all 3 sets of GPS springs/rollers and the secondarys stock red and then a yellow spring to show the same sorts of things. I think this seems like wizadry to a lot of guys and this could really help take the magic out of it so guys understand how these cvt's work and how changing certain things can help and hurt performance.

[@lucassarchet6712]

If you look through his videos, Dave has done one about all of this.

[@billwilliamson9842]

@@lucassarchet6712 oh cool, i'll have to check it out. thanks

[@Deucealive75]

With the stock driver I go right to the extreme and use the yellow spring in the tightest hole in the driven for the highest RPM at the belt shift. But I have never tested this with a stock engine and stock gearing. The Juggernaut behavior and gearing are so different than the stock driver that a heavy tension spring in the driven is not needed. The light tension green spring may be the way to go with the Juggernaut.

[@tormentorxl2732]

The cvt transmission bikes usually are in the 30’s.

[@tylerstrong1776]

I was worried about doing away with my it drives me nuts bc I get to a good speed and it'll shut down then u have to let off the gas and give it more. I'd like to just hit the gas and go without going fast, slow, fast, slow. 😂 Thanks for the video! Wish the installation was a bit more detailed showing how you put that linkage back on bc that's worrying me the most I think. Also, mine has a chain, not a belt, so is it any different or basically the same steps? Just don't want to mess anything up since it's brand new.

[@bigcountryV]

Did you do it? I'm wanting to do mine but im nervous about it.

[@gabrieltorres126]

I have the same bike and I’m interested in doing this, how many ft lbs of torque did use on the side cover of your motor? 5:32

[@Dirt-knees]

Along with a few others…. I have the same bike and want you to build the stock motor. Red Beard did a budget build on the b200RSV….I’m waiting to see what you come up with before ordering parts 😂 Great videos !!! Thxs

[@Black66]

Thanks! Yes, I have more videos to come with the 196 on this bike.

[@3GingerCats]

what should you do to make it faster? a 4 inch zoomie and a jet, and just leave the plastic cover off the airbox

[@6wheeladventure]

Great video ! I just picked up a new B200RSV these are so much fun ! What are your thoughts on the plastic cam gear ? So, how about cam and valve springs next, maybe a billet rod too. I'm going to be a good student watching this B200 build !

[@Black66]

Thanks! The cam gear is ok . I have quite a few videos coming out on this bike.

[@ToGrimmToWin]

I'd like to do all this to one soon as I get it. Also is there a metal cam gear?

[@jairodiaz6538]

what size is the screw 5:16 ?

[@Black66]

Thanks! I use a 1/4 x 20 in the top

[@SDS-1]

I think exhaust upgrades. Like test different bolt on options and then experiment with vapor carb systems. Really really curious what you come up with on that.

[@davidpearson8043]

Would love to see more mods on this bike!

[@Black66]

I have more videos coming out with this bike .

[@jaxsonjanneyoutdoors1263]

5:16 where did you get the black screw

[@Black66]

Hardware store bolt bin.

[@damionsparksgonzalez-.-1681]

Would You Recommend Changing More Internals After Governor Removal?

[@Black66]

It should be ok with the stock carb and muffler. When I start spinning it harder I will add the billet parts.

[@walmartynotc-jq1ps]

Legend has it, if you dream it they will come ,another mini bike appears , IYKYK , only true legend's know

[@thundercatt5265]

My 80 BBK not the 72cc upgrades they call 80's but a true 81 cc motor with a big valve head and hybrid supercharger will hit speeds of 70 + ,man I took a old dirt bike engine I had apart,the guy said it was a 50 ..but when I pulled the piston out i found it was actually a 70 cc stroker piston , that explains why it was so fast if i can get a gy6 stroker crankshaft im gonna use it on my 80 , I might have to get a whole new crankcase to make it work

[@joerodriguez7600]

Hi, Joe here and I love the channel brotha! I recently purchased a Coleman b200r and I also did the governor removal I was wondering when you took that governor bar out what size bolt did you fit in that top part of engine right under the gas tank? I just put a random bolt and wrapped it with teflon probably not the brightest idea but it worked

[@Black66]

Thanks! I use a 1/4 x 20 in the top but whatever works its all good! 👍👍

[@bombink1968]

What screw did you use to replace the rod in the top? If you recall. Great video! VERY detailed

[@Black66]

This video shows the bolts used at 6.45 into the video kzbin.info/www/bejne/aF63pptjmcmfps0

[@bombink1968]

@Black66 Roger that, 1/4 by 20. You the man. I know ZERO about these and you are making it very comfortable to try. Thanks for all you do in the community.

[@Black66]

@@bombink1968 Thanks for watching the videos!

[@JonathanMclain-z9o]

Hey a little off topic but need help.. would you be able to tell me why my b200 is quaking after about an hour of riding? wondering what I should do

[@tyeirvine3615]

Do you have to take out the governor internals or can you just take off the governor arm beneath the fuel tank?

[@dirtytamato]

Amazing video. Would you make a video on the Greenworks mini bike and take out the speed limiter?

[@gregswafford9839]

I can't be the only one wondering what's going on beyond that fence you always do your 0-30 runs at? That some kind of mining? These new coleman bikes are nice I would like to try one of these see how comfortable they are.

[@Black66]

Its a quarry. The bike is very comfortable. Handles well.

[@Moneymike29]

I just picked mine up today. It leaks oil from the left side cover. Are those torque spec or can I just crank em down and see if the leak stops?

[@darrellnichter9894]

Free mods only on this bike to see what you can improve? I've even drilled speed holes in a muffler after drilling out the jet. Also check driven pulley for spring placement. Gained alot

[@ih8france359]

Where was your pully spring originally, and what did you change it to?

[@Jeff-mu8dq]

Is this the same process for the b200r?

[@Black66]

Yes

[@kevynrojas2587]

Did you remove your governor on your b200r?

[@Black66]

@@kevynrojas2587 Check out the B200 playlist for everything from governor removal to billet parts . It will apply to the B200r 196 also.

[@Whatwhat953]

Can removing governer and loosening throttle screw better exhaust and intake including carb hurt or blow up the engine

[@mistiadeaton6246]

I did it on my 100cc and it’s still running you gotta have some experience with tuning the carb but it shouldn’t hurt it not telling you it can’t but it hasn’t hurt mine

[@conkretescott]

What air pressure are you running in the tires. I have the recommended 10psi and my tires feel like eggs, no round but lumpy

[@SpACeCruizeR2o3]

FIRST PULL NO BULL 🐯

[@JoeAnthony1978]

Can you List a forged flattop piston and rod combo possible a stroker kit and roller rockers

[@vinamose6204]

Do I have to get into the engine or can or can I just take out the screw?

[@aidancox450]

Do you drain the oil before taking off the governor ?

[@cristiangambino7626]

Yes

[@groskreutzzdsinn17]

Can you please do a mega moto 212 rear swing arm kit from gopowersports install video on this b200 model?? Will it require extra fabrication to the frame?

[@Black66]

I thought about it.

[@eyehearther111]

You should just turn it into a E bike or just 196cc build. Everything about the bikes badass. Do the exhaust next.

[@BlackWingMusicInc]

How fast do you think a pred swap will be on it?

[@Black66]

Check out the B200 playlist. The bike gets quite a bit faster kzbin.info/www/bejne/b4XOXqdnbLJgrdk

[@miguelruiz2399]

Do u have a step by step how to remove the governor the video played to fast couldn’t catch up. Thank you !

[@Black66]

Yes, check out the other playlist on the channel. There are many governor removal videos . kzbin.info/www/bejne/Z3LKo56GfZ1sbpI

[@ant123_2]

what thread is that governor bolt or is it already on the bike?

[@Black66]

Check out the B200 playlist for the governor removal video. kzbin.info/www/bejne/eXyXoWCfjrmqfMk

[@boisebadboy93]

Is it safe to delete the governor off these and ride without upgrading any other parts?

[@chinoschannel6301]

If you remove the throttle stop part then yes as long as you don't over push it

[@chinoschannel6301]

If you remove the internal governer gear then not really

[@DAVIDRIVERA1998]

Is there a difference if I buy the b200 vs b200r other than top speed?

[@Black66]

Yes, one has a torque converter and the other has a Jack shaft

[@JLeezy864]

Do you have a more in depth video of the governor removal and would it be safe for the motor to run like this with no other mods?

[@Black66]

The 100-dollar Predator video shows the governor removal. kzbin.info/www/bejne/o2nEgH-jqt-fe5o

[@JLeezy864]

@Black66 thank you sir. You are the greatest. Does this also work for the 224 predator?

[@KeianaM]

I zip tied the governor on the B200R. Is it possible for the fly wheel to fly off if I keep riding? What should I do to ride it safe. I’m asking for peoples opinions

[@Monkey.t4]

Nah u chill fr fr holla

[@kevynrojas2587]

How’s your motor after zip tying the governor?

[@KeianaM]

@@kevynrojas2587 it’s still running like brand new. I have 2 hours on it. I put a tachometer on

[@KeianaM]

@@kevynrojas2587 I try not to go over 5000rpm and if I do, not for long

[@Deucealive75]

@@KeianaM In my opinion the zip tie is not ideal for what you are trying to do but limiting to 5K RPM is a very good thing. And you are due for its first oil change. The cleaner the oil the better. If your bike is going to spend most of the time on the street a 40 tooth sprocket is the way to go. Black66 has videos with the 40 tooth.

[@parallelmonkey4147]

Can I buy one

[@darintraver4983]

Another great video 😎 I wonder how a 420 cc would do in a mini ??? Lol that would open up everything you do again for many more great videos 😎

[@Black66]

Thanks! I'll try and do a big block on the channel at some point.

[@NONAME-kw3pu]

cm .265 lift cam, ported head, billet rod n flywheel, .009 head gasket... the usual stuff that normal ppl can afford to do... and 22mm chikuni carb. be sure tell us which jet size ur running & at what altitude u are. 125 @3700 ft? is that good enuf? means even bigger jet closer to sea level. air is thinner at higher elevations than at sea level

[@Black66]

Yes, good plan! I would like to do a 196. Haven't did that yet.

[@ToGrimmToWin]

I'm at 660ft above sea level

[@Deucealive75]

@@ToGrimmToWin Below 1K ft elevation start with a 120 main in a VM22 clone and header pipe on a stock 196. For cooler fall temperatures use a 125 main.

[@Moneymike29]

Is there anyway you could make a video explaining exactly how to remove the for or and every step you did. The sped up video and skipping parts makes me still a little confused. I’m getting this bike next week and I wanna make sure I do it right

[@Black66]

There are more step by step governor removal videos on the channel

[@Moneymike29]

@@Black66 thanks!

[@O.B.C.D]

Your in az just like me but im in bullhaed city im guessing you are in Kingman or phenix or something

[@Black66]

Kingman

[@O.B.C.D]

@@Black66 no way bro we are both being cooked out here lol 😆

[@Black66]

@@O.B.C.D Kingman is a little bit cooler. Elevation👍👍

[@StickyMorty]

What app did you use to find out your speed

[@Black66]

I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.

[@adoptme031]

Can you make a more thorough version on how to remove the governor

[@Black66]

Check out the 224 build video or other build videos on the channel. kzbin.info/www/bejne/d4LWZJ9_bseof7M

[@fresnobassn744]

Man I'm having problems with my 2 mini bikes these suckers only stay on choke But when i put them to Run Position they trun off 🤦‍♂️. Anybody knows ?🙏

[@Black66]

Yes, check out this video kzbin.info/www/bejne/mGbFimBnnK6Kjc0

[@Sim_racer_40oz]

Now what’s the best mini bike frame???

[@Black66]

That's a matter of opinion.

[@Throttle_junky]

I watch a lot of your videos and Im trying to get it to go to 60 65 its stuck at 34 with governor by pass link to carb so only thing I've done is carb and header and I don't like the stock carb I purchased and the stock carb that came on it are non adjustable

[@Black66]

I have many videos coming out on this bike. Stay tuned!

[@erika9664]

What app do you use for the speed tests?

[@Black66]

I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.

[@erika9664]

Thanks so much for getting back to me! Always love the content

[@Black66]

@@erika9664Thanks for watching the videos!

[@d2nasty696]

I get 32mph on my B200 as well. No mods just removed the bolt that limits the throttle

[@Black66]

Check out the other videos in the series on this bike.

[@matthewsalinas1486]

Hey is just removing the bolt safe I just bought one and wanna make sure?

[@justinjones459]

How fast does that one go I have the cheaper version of that one I guess you could say

[@Black66]

Check out the B200 playlist for the engine build and top speed runs with this bike . kzbin.info/www/bejne/oJvXl3Wfqqh5ha8

[@justinjones459]

@@Black66 i actually did watch a few but it’s not exactly the same bike but I do know it is the same engine

[@Black66]

@@justinjones459 Yes, there are a few different models of this bike. The B200 with the torque converter, the B200R with the jack shaft and the RSV with the rear suspension, and a few sub model models.

[@justinjones459]

@@Black66 wow good to know thank u

[@justinjones459]

@@Black66do u know much about the b200r?

[@hectorkills1]

Do you have to have front and rear brakes to be street legal in az

[@samaxeman123]

you should do a duromax 500cc minibike build, 1 inch shaft big block beast..

[@Black66]

That would be cool!

[@TALK-0THECONURE]

Couldnt you have just turned the bilt instead of complete removal? Lol. Aqesome video man!

[@Black66]

Check out the B200 playlist. Needed complete removal for the later videos. kzbin.info/www/bejne/g2TPnYmAZ9-DrNU

[@nkeppy123]

would i have to modify internals after i take the govnor out because it revs a little higher or can i ride on stock internals with good reliability

[@jaydenbrown3314]

nope if you remove the governor on any of these bikes you’ll want too get a flywheel cam rod and springs

[@eyehearther111]

Is that colemans newest bike? Very clean all around.

[@Black66]

Yeah one of them. They have a few different models

[@eyehearther111]

@Black66 idk maybe I'm tripping but the look of the bike is way better then the older colemans.

[@Black66]

​@@eyehearther111 Yeah, This Model looks simular to a Mega Moto 212

[@eyehearther111]

@Black66 yes indeed it does. Can't wait to see it in person.

[@GreasedUpDeafGuys]

Try a wildcat 223 build

[@andrewhanson5942]

Careful there Black! Them valves are gonna float if you keep running it with wide open throttle! (and that ain't pretty.)

[@Black66]

It has upgraded valve springs. Check out the B200 playlist for the entire build. kzbin.info/www/bejne/oJvXl3Wfqqh5ha8

[@andrewhanson5942]

@@Black66 OK bud, sounds like you've got that under control. Just be careful holding it at high revs under low or no load for more than a few seconds at a time. Good recipe for throwing a rod. These things ain't made of indestructium!

[@Black66]

@@andrewhanson5942 This engine has a billet rod and 10 RPM flywhell. Check out the build video. Thanks for watching. kzbin.info/www/bejne/b4XOXqdnbLJgrdk

[@andrewhanson5942]

@@Black66 Then give 'er hell!

[@thomastaylor2513]

Gee guy you got more bikes then Jimmy Carter had peanuts

[@Black66]

LOL yes.😂

[@andrewkuhtz]

Lol

[@NuggetCuh]

i see people talk about ziptieng the governer or something then i see this video and im confused what the difference is

[@johnnylunsford5668]

Im from Monticello Kentucky

[@JasPlun]

Might have to buy me one and slap a Honda GX200 on it.

[@rome0dome]

Bought one from tractor supply 4 days ago i zip tied the governor now I got gas in my oil might jus take it out

[@Black66]

Check out the B200 playlist for may part combos with this bike kzbin.info/www/bejne/g2TPnYmAZ9-DrNU

[@thomastaylor2513]

Looks like someone unscrewed the throttle stop screw

[@dl1k072]

Is the internal governor gear really just that easy to remove?

[@Black66]

Yes, especially if you remove the flywheel and knock out the pin hold on the gear.

[@S200.]

I'm surprised that it came with a torque converter. Usually those run the clutch

[@Black66]

There are a few different models of the B200

[@adanvaldez6516]

What is the governor and what is the function?

[@Moneymike29]

Keep engine rpm’s to where they think it’s safe. It’s a plastic gear inside the motor that restricts engine speed

[@medacolden9458]

You're an addict... a mini bike addict 😂

[@pauseandlisten]

Anyone know if the B200 would survive a direct CME or EMP?

[@Survive2022]

There's no electronics in it. So, yes.

[@egidio6david0]

Remove Governor, install dual hub motorz lol. I want to see you race the alien..

[@christophermullikin3688]

I want a racing carb

[@calbyslave]

Try upgrading it to billet internals. I wanna see somewhere near 70mph

[@Black66]

I'll do that. Haven't done a 196 yet...

[@calbyslave]

@@Black66 Yea I’m gonna build the same exact bike that’s why I asked. I kind of wanted a guide since I wanted to save money and not buy a predator

[@Deucealive75]

@@calbyslave Good for you. The 196 is fine with mild to moderate builds. But if you want big power it's best to start with a bigger engine.

[@johnnylunsford5668]

I love to have a mini bike too ride around$20.00 or get out of the way

[@victorcontreras9097]

Will you change the engine at some point? To a predator

[@Black66]

I have a five or six videos in the series so far . I have a couple more to do and then after that I might do an engine swap.

[@eyehearther111]

I don't think you have enough bikes. I see in the video you had more open space to fill up in the garage 😂 maybe have your wife start parking outside the garage. 😊😊

[@Black66]

Yes , great idea! 😀

[@eyehearther111]

@@Black66 😂😂

[@Ediesel1shorts]

Dude I have a coleman b200

[@groskreutzzdsinn17]

Its still got the throttle stop!! Lol

[@Black66]

The throttle stop is unscrewed all the way in the speed test. Check out the playlist for many more engine mods with this bike. Thanks for watching!

[@Bigchungus722]

Mine goes 23 sadly

[@Black66]

Check out the MB200 playlist. kzbin.info/www/bejne/oJvXl3Wfqqh5ha8

[@sertangunduz34]

I don't get it my bike is 80cc and makes 50mph easily this bike is 196cc with mod it does 42mph 🤷

[@alexwojokim5072]

What bike

[@sertangunduz34]

It is generic chine scooter actually, but it branded by a turkish company Aurora cappuccino it calls I think only sells in Turkiye, any way originally that bike has 2 versions 50cc and 125cc I convert my 50cc to 80cc with cheap piston kit, and it moves really good 50mph plus easily even with 2 adult on it.

[@IsaacsRCs]

Throttle screw removal

[@Black66]

Its not using a throttle screw with the governor removed

[@libbylynete9647]

Trade it on a Harley. 0-30 way quicker and top speed 130 :)

[@Black66]

Minibikes are more fun and cheaper