New DCF850 Atomic Compact impact Driver (My New Favorite Impact driver)

[@ManCaverTools]

Dewalt has a 3 year limited Warranty, Not 5 it was a mistype, My bad.

[@tammyshellikoff3482]

It is all good

[@mikekahotea8148]

Yup it's all good , your time and effort is more appreciated thank you Dave

[@brandonbronner9365]

Take a shot every time he says “That’s a cute little impact” or “cute impact” 🤣

[@l00nybin]

You'd have alcohol poisoning before the end of the video. 🤣

[@robertcasey3528]

I want my Bosch to be cute too!

[@TJB1510]

FUNNNIEST THING I HEARD ALL WEEK

[@Peripatetic_Proletariat]

Do you think he's hitting it?

[@toolhead147]

I really like those new dewalts can't wait for my tool.

[@PhillyFixed]

LOVE this tool. Second DeWalt impact/driver wrench that I've gotten excited about, after the 12V Xtreme 901.

[@l00nybin]

That 901 is going to end up on my shelf soon.

[@dannyle9853]

Same I have the 901 and just picked up the 850. Love my 901 with the 5ah Oil resistant battery and the 850 is my first impact driver.

[@ManCaverTools]

my favorite impact driver now

[@dav1d629]

NO WAY!! I REALLY WANT THAT IMPACT! Looks like a size killer

[@saturnmedia1]

Excited to see the comparison between this and the previous version. Strap a 6AH on it for all the tests! I don’t ever use it with anything less than that.

[@richardturner7185]

Home depot had the bare tool for $99 so I got 2 to replace my 887’s 🙌🏼

[@Joethetoolguy]

finally an impact that lives up to the atomic badging

[@dewaltman9377]

Nice now you got the new 850!

[@whatthehellimbored]

Can't wait for powerstack battery review.

[@androidken]

I finished converting my dcf850 to a 3/8 wrench last night. I used it as a wrench today to change my differential fluid on my Ranger. That thing has so much power and could get in between my stored spare tire so I didn't have to take it off first. It was freaking awesome. I used an anvil with smaller dogs(is that what they are called?) than the driver anvil so I need to find a bigger one but I'm pretty happy regardless.

[@mike_t_007]

Just got mine and have the anvil on the way! How has it treated you all this time? Also do you use it with the Powerstack Battery

[@robertfrate9738]

Hi Dave, it’s amazing for such a tiny tool, when you do the anvil swop please list the part number I’m very interested in that, thx, Bob,

[@michaelenockson6536]

I got a deal on a DCF850 bare tool at HD for $89, couldn't turn it down. I used it on the jobsite for a little over 2mos, and it was fine, but one morning when it was like -20°, it just started flaking on me, and I wasn't even pushing it hard. 1/4" lags. My M18 Fuel finished the job, without breaking a sweat,, and I returned the bumble bee. I take all my batteries inside every night during winter, so it wasn't a cold battery that caused the fail. The Atomic is great for general use, but I'm in the industry, and I prefer to have something in my hands that I know isn't going to crap out on me. So I'm Team Red.

[@ManCaverTools]

its a smart move its better then keeping them in the cold

[@paulgrice6766]

IF YOU USE A 1/4 INCH IMPACT TO DRIVE 8 INCH LAGS DAILY YOU WILL BE BUYING A LOT OF IMPACTS DRIVERS

[@juanc5149]

Come on down and buy all your impact drivers! At the impact drivers and 8 inch lag store!

[@PhillyFixed]

IF YOU YELL ALL THE TIME WHILE TROLLING YOU WILL BE BUYING A LOT OF COUGH DROPS

[@mikekahotea8148]

It's still a damn good driver the sky is the limit for I would say 8 inch lags . Would it be better to limit it to 6 inch instead

[@l00nybin]

IF YOU MISS THE POINT OF TESTING IT LIKE THIS, PEOPLE WILL MOCK YOU IN THE COMMENTS.

[@paulgrice6766]

@@l00nybin there's not point and I could care less who mocks me

[@twinbee4243]

That's a nice impact driver! But I'm still happy with my good ole DeWalt DCF888 and DCF887 and my Old school DCF885. I probably don't need the new dcf850. Despite of the new dcf850 being much more smaller and compact. The 888 and 887 and 885 are still compact and small and lightweight for me and I've been running my 888, 887 impact driver and 996 Hammer Drill on 8.0Ah battery the same battery that came with the XR Power Detect circular saw that I bought 2 yrs ago. And I bought a new DeWalt 20V 10.0Ah battery I got 4 of them, I'm starting to sell my old 6.0Ah because I have 6 pcs of 8.0Ah battery and 4 pcs of 10.0Ah battery. These are the batteries I use to run my circular saw DCS574W1, 888, 887 and 996 For my Brushed DCF 885 I'm running it on the new Power stack battery 1.7Ah I got 6 of them in a bundle package that's where I'm getting rid and selling my old 1.5Ah and 2.0Ah. I don't have much Flexvolt battery I only have just 1 that's 20/60V Flexvolt 15Ah Battery the highest Amp Hour Battery that I can get that I use for my Cordless 18" Chainsaw and for my Cordless Pancake type Air compressor to power up my Pneumatic Air Framing Nailer and 15Gauge Finish nailer and 18gauge Brad Nailer.

[@PrximaCentauri]

Did you see the new power stack batteries dewalt unveiled yesterday?

[@tammyshellikoff3482]

Thank you for the video and I do think it is the overload protection

[@NoxiousShock]

"Ouu, 170 degrees... AND it still needs to take it out" Great line ! Haha

[@titus41]

I love this tool but one thing that nobody mention is the hand grip is bigger than before. That’s something I didn’t like. Reminds me of Milwaukee M12 grip.

[@rrampage36]

What would be burning inside a brushless tool...? The grease/oil...?

[@seano932]

Perhaps. It could be the coating on the copper windings themselves, which is what happens when a tool "lets the smoke out."

[@juanc5149]

There’s also a new budget impact driver that replaces the dcf787. The dcf840. It’s basically resembles an updated 12v dcf801 but 20v.

[@mikekahotea8148]

How long has it been since that's been released bro , is it on a market now

[@steveb611]

Hi. Do you still recommend this impact. Impressive it can keep up to the lastest impact on the market

[@Biaanca5036]

If measurements serve correctly(3.97 inches), it should be just as small as the Ryobi Bid-11XR in japan. 9.9cm vs 10.08cm on the dewalt. A 10cm tool for the west finally :) Now you just need stubby drillbits and collet-compatible 1-inch driver bits and you've got the perfect cabinet gun

[@anditoba4096]

How about dewalt chuck at this version? Still it same with dcf887?

[@PartyintheAM]

how much bigger is the 6amp battery than the 5amp, physical dimensions

[@damienkinchen]

You should make a shirt that says "TIIIMMEE" with an impact sinking a screw. Lol

[@androidken]

Which part number for the anvil will you use to convert? I want to do it. I use 3/8 mostly though.

[@sealteambravo6]

The DCF850 is better than the DCF887. I’ve been using the DCF850 the past week and it has better power than there XR impact driver. It feels smoother and more powerful.

[@jimcatanzaro7808]

The 887 test better the 850 is supposed to compete with the 12v line I have the 885 and I can’t kill it 5 years and still good

[@twinbee4243]

No not really. DCF850 is a Downsized DCF887 same motor, same specs, same RPM, IPM and same torque. DCF888 is the Flagship of DeWalt 20V brushless impact driver. It's what I use in my daily jobsite for years since it was first released. Then follow up I purchased dcf887. Back in the day I was only using DCF885 and DCF895 Brushless. Then when the DCF888 and 887 was First released I was Amazed by it. And I've been using them ever since, used and abused everyday. One thing that I don't do on all of my impact drivers is to throw a paddle bit and do some drilling that is so stupid and dumb that will caused your tool to smoke and fry no matter what brand they are. I can use my impact drivers but only just to drill a pilot hole twist drill bits no bigger than 5/16th. That's all I use to drill pilot hole for lag bolts only where I get lazy to grab my dcf894 mid-range impact wrench. I can use my impact driver to drive lag bolts but with pilot hole.

[@bobbywhitehead4655]

Did you hear about the new battery 🔋 coming out before Christmas 🎄.

[@olgajoachimosmundsen4647]

How come dewalt drills etc don't come with magnetic sideholders like in Europe?

[@tahakhan2465]

I had the xr impact driver that I just got on Black Friday deal with other tools for 599.99 and three free but I want this also because it’s the most lightweight, compact, heavy duty, brushless, powerful tool I ever saw I’d rather have than the Milwaukee because I will relalize when up the in the celling holding up a heavy tool and screw flips and hits right at me when I’m work on a ladder that 18 ft height or also as as matter a fact I can use this for cabinets, electrical work, and all my fencing work, also framing and doors it look like it will get all my job done with power stack and 5 ah I won’t need 6 ah the tool is already fast

[@jrworthy]

You like the tool but is it cute?

[@dtran22]

Should try diff spot. Maybe it hit a dense spot

[@charlespalmer3158]

lol, running lags i'd probably reach for a mid torque for. thats awesome.

[@waynebeck7801]

Yeah..I think my impact wrench would be faster.

[@ФедорБеляев-п9б]

The best impact driver.

[@johnq6123]

This one vs DCF901 12v EXTREME with the 5ah battery; what's your opinion???

[@seano932]

Torque Test Channel has done them both. The 12 volt 1/2 impact wrench is 60+ ft lbs. more powerful. Unless you meant the little 12 volt impact driver, the DCF 801. It's a great tool, but not nearly as powerful as the 887, 840, or 850. It's wroughly comparable to the old Atomic 809.

[@johnq6123]

@@seano932 I purchased the 901 after posting the question but thank you for the response 👍

[@djjinerson]

Instead of Atomic they should have called it the “Too Cute” 🥰 DeWalt- “For the man who likes his tools as cute as his men” Now featuring the “Two Cute 2.0-Dave Nichols signature series-limited run

[@kevinklepp5894]

Are they in home depot yet I've been looking for it looks like a very nice tool

[@Eric-ci1of]

Is this a cute little impact?

[@scottkronmiller3746]

Not sure he didn't say :(

[@mikekahotea8148]

Awesome review Dave much appreciated

[@johnzablan1086]

Mahalo for testing the new driver!! Can you please match up the DCF921 against the 2855 by putting them through these same lag tests together? Much mahalo!!

[@quadsquadracingable]

Can't wait to be able to get one

[@michaela3330]

Cool video! You sure know how to abuse them! 😃 So you now you prefer it over the makita xdt16/td171??

[@sbledstl]

Seems awesome for a compact driver for deck screws and some lags. A little underwhelmed for a $200 tool though. Maybe better prices around $150 or so.

[@sbledstl]

Disregard. Just saw it comes with a 5ah battery, but still would go with another green line I know that has a hammer and impact driver for $229 ;)

[@Richpope87]

I’ll say it agin love your videos but bro I hate it when ppl say amp hour. Just say I’m going to use a 5 amp battery for this test. Doing great bubba 👍

[@andrewfera4348]

I was waiting for this video! I thought it would be cooler! but he is not impressive!

[@reyigov7870]

Very good content. 👏 Will you try to fit a 3/8 or 1/2 square anvil on that Dcf850 like you did on the milwaukee compact impact driver?😬 It will be very interesting to see what it will show in action. Thanks and keep the good work 👌

[@herbertherbomoore415]

You need to test that one against the m18!

[@stopwar2712]

Hi Dave, it's more power than 887?

[@ManCaverTools]

we will find out tomorrow along the the 887

[@GuyFromJupiter]

From what I've seen yes, it is. At least on TTC it was not too far behind the Flex or Milwaukee gen 3, and I think it was actually stronger than the Makita XDT16.

[@aco2518]

Considering how small the impact is I supposed the heat has to go somewhere. And the only thing left for it is to get hot as Frick lol.

[@jnbovitz]

it has a much larger fan than the DCF887, i bought this atomic once it came out and have used it for a week.

[@aco2518]

@@jnbovitz Nice! Is it the hammers or the motor that heats up the most? Is it comparable to the 887 in power?

[@jnbovitz]

@@aco2518 very comparable to the 887, i would say the hammer heats up more but I haven't pushed it too hard yet. the compact size really sold me on it and it came in super handy.

[@UncleIvan1]

is this your favorite now? lol

[@micjubba709]

Nice dave dont normally like dewalt tools but they starting to make improvements by looks of things i like that impact dont like any the others part from the small mid torque 1/2 inch impact i forgot the model numbers lol awesome content thanks good to see a review 😁seems it has good power for such a little impact

[@ManCaverTools]

the new atomic line is a game changer for compact tools

[@micjubba709]

@@ManCaverTools yeah seen them like look good

[@GuyFromJupiter]

I don't think it's as fast as the Flex or Milwaukee gen 3, but it is fast and that size is awesome.

[@k-nutl6386]

Keep the good content running

[@shaunhowe3220]

Vs the Milwaukee fuel would be cool to see

[@whydotheathensrage]

Test with the new Power Stack

[@josemartins287]

Aguardando chegar ao Brasil essa jóia rara de máquina leve compacta e bruta por aqui não tem data pra chegar canal top ja sou escrito faz tempo ja tenho a linha atomic falta só essa pra quem trabalha coo montador de móveis não pode faltar

[@dangrimes5078]

When you get this beautiful tool you will be the envy of all the other furniture assemblers.

[@micjubba709]

Dewalt finally put in tool protections to stop them from going into smoke show mode lol time will tell its still brand new impact

[@robertcasey3528]

I don't say many tools are cute tools so I made up for in this video🤣🤣

[@kennycolonsamol]

Wait till u put that stack battery on it

[@ManCaverTools]

I cant wait for that

[@camw6990]

Been waiting for this review! Not worth 160 for bare tool tho.. come on dewalt.

[@whydotheathensrage]

i may be a buyer at 99

[@camw6990]

@@whydotheathensrage was thinking the same 100-125. 160 isn't right for that tool.

[@juicewatter]

That new tool will outperform the 887

[@sealteambravo6]

It already does, I’ve been using it at work. There are many things that my old DCF887 couldn’t do that this too can.

[@MrSmellGud]

Great video, can't wait to see the 1/2 inch conversion. 👍🏾

[@rudeman1914]

Good video.

[@iwanciwong5131]

good job dewalt atomic and dcf 887 pigting go ok

[@vane5736]

Great video!

[@jackofalltrades123]

Please put it up against the flex or Milwaukee or Makita!!

[@victorcuevas8874]

Omg so cute!!!!

[@Nguyent2477]

Still not pass M12 2553 , Dewalt is always the one to follow 🤗

[@luisinhoens90]

The M12 fuel impact driver can just barely keep up with the subcompact offerings from Ryobi HP and Makita. It is no match for the DCF850. A 2750-20 M18 Brushless should be more comparable

[@Nguyent2477]

@@luisinhoens90 👇🤣

[@luisinhoens90]

@@Nguyent2477 someone can't accept the truth. Nobody compares a 12V to an 18V tool. And I love my M12 as well as 18V tools. Why don't you come up with arguments other than posting childish comments on 8yr old videos?

[@dewalt_6728]

Sometimes I feel like it's the wrong way to test tools which are not the use that should be tested, because they were created not to be assigned as such but it's okay just for testing but it's better to be tested with the actual task.

[@kyle3045]

He’s seeing how strong these tools are. We know they can drive screws easy but we wanna know the limits

[@dewaltman9377]

Hi

[@OAMSOCIAL]

I was biting my nails. Painful to watch. Nice job

[@vuongglass366]

Dream !!☺️

[@КровожаднаяУлитка-ф9б]

Интересный шурик 😊

[@wisewoodworks1966]

First 👍

[@robertorodriguezamador9406]

Que le paso al impacto...se quemo?🤔🤔🤔🤔

[@luisinhoens90]

no, entra en modo de proteccion limitando la potencia o deteniendose para evitar que se queme el motor.

[@micjubba709]

Smoke show ??? Lol

[@dannymeil3294]

It’s not as strong as the Milwaukee fuel impact driver.

[@howiefeltersnatch2596]

What it should have been in the first place.

[@craftsmantrucker6867]

$200?! Wow! That's too much for a compact sized dcf887! Same specs same power and Torque. $200?! Really! I'm not gonna buy it❗ my old DCF887 that I bought in year 2015 and my 4 yr old DCF888 are still going strong even my very first dcf885 I bought it on year 2012 9 years now and replaced carbon Brushes 3 times and been abused in the jobsite they're still going strong. But for this new Dewalt atomic dcf850 it's too Expensive! However! I'd rather wait for the official release of the New DeWalt 20V PowerStack Lithium Ion Pouch Cell Battery. I will replace my old 1.5's and 2.0ah batteries with the new DeWalt 20V PowerStack battery. I hope DeWalt can make a Flexvolt Battery in a Compact form using those cell ouch lithium battery technology.

[@jpnphom5470]

It doesn’t make any sense to buy Dewalt 12v…their 12v batteries are almost as big as their 20v….That’s why I like Milwaukee m12

[@UncleIvan1]

the tool display music sounds like something off Nintendo James bond game

[@Toolboss0826]

Why are you trying to burn it out. Do real tests like 3 inch deck screws instead of doing a test no one cares about or has seen already with the 887.

[@emanuelcastellanos8280]

Dont burn it that dewalt is new better give to me I dont have one

[@jerrodnewsome1495]

So I just realized I was unsubscribed from this channel I don't know why.

[@cs9260]

My 850 sucks! Cams out every time on screws. Useless for screws.

[@ManCaverTools]

id return it then and exchange it for another one

[@chrisbeaver9917]

Why do u continue to try and drive fasteners that are way 2 big why don't u hang a couple sheets of drywall or something get a better idea of how it feels doing what it's made too not hey let's push it to it's max and if I break it breaks but if it don't break here it will do good on reg stuff

[@ManCaverTools]

tools these days are very powerful. These impact have 0 issues driving drywall screws with control. that's standard now.

[@bunnitz]

but---is it cute??

[@ManCaverTools]

it is bro. lol

[@konamanstudio2447]

👍🏻☕🍩☕🍩☕🍩☕☕☕

[@Yeti1080]

This is an unrealistic test who and what person or pro would run this test…. Tool abuse is what this is … use the right tool for the job !

[@benredmond8271]

What’s with the cute🤮