NEW Dirty Dingo Mounts! Has the engine sitting RIGHT!

Be sure and show some #dbfam love to fabBot for taking care of us!
Be sure and let them know you're #dbfam if there's anything they can help you with!
Visit FabBots website 👇
www.fabbotfab.com/
FabBot on Instagram
fabbotfab?igshi...
FabBot LS into Colorado mounts we're using.
www.fabbotfab.com/products/fa...
FabBot adapter plate bundle we're using
www.fabbotfab.com/products/fa...
FabBot Power steering adapter kit we're using.
www.fabbotfab.com/products/07...
in today's video we install the 5.3 l third generation LS out of a 2001 Chevy Tahoe into my son's 2007 Chevy Colorado. huge thanks to Fabbot for the conversion kit! The AR5 to LS transmission adapter made things super simple! especially bolting the LS into the Colorado using the fabbot LS conversion mounts made it seem like it belong there, we also don't have to go through the hassle of figuring out how to run the power steering lines thanks to the Fabbot power steering conversion kit. just about everything was a direct bolt in, only thing that had to be trimmed was the engine cradle to clear the LS into Colorado conversion mounts. LS swapping made simple! thanks once again to Fabbot. highly recommend using their products in the links above for any of your LS into Colorado / canyon needs!
Want to help with the builds?? Follow the links below!
Become a Patreon here
www.patreon.com/user?u=22862832
Buy merch here
deadbeatgarage.myshopify.com/
Send Me Stuff Here
Bravus Jeffries
P.O. Box 23398
Phoenix AZ 85063
Follow me on social media
Facebook
KZbindeadb...
Instagram
deadbeat_ga...
Built Not Bought group on Facebook (fixed the link)
/ 768216480031651
Thank you all for the love and support you have shown, it is greatly appreciated!
Check out all the links below! Help support the companies that support the channel! #dbfam
MPC Motorsport website! Full of badassery!!
www.mpcmotorsport.com/
MPC Motorsport on Instagram
mpcmotorspo...
Looking for some custom fabrication!? Get ahold of Sic Industries, LLC.
Facebook
/ sic-industries-llc-529...
Email
[e-mail]
Visit Finish Line Factory for all of your AN line needs!!
Finish Line Factory Website
finishlinefactory.com/
Enter "deadbeatgarage" at checkout to receive 10% OFF!!
Finish Line on Instagram
finishlinef...
Finish Line on Facebook
/ finishlinefactory

[@thatfiek3027]

That steering shaft is so gonna smack that header under load. If you can I’d trim down a tiny bit of metal off the shaft..

[@Mr.Wongburger]

May have to clearance the header the old fashioned way.

[@trentdawg2832]

BFH

[@Low89jr]

Build is looking so good. Thought I mention oil pan is safe from speed bumps based on it being in line with the front wheels, a rock or a pot hole would be my concern

[@cbdreamer1709]

This project is the best ever! Going to be super cool. Can’t wait!

[@shawnjacks3505]

One of my favorite parts of your videos is seeing the dogs

[@willmatic84]

💪🏽😤 this bulid is official loving the uploads 🤙🏼#dbfam

[@BETdaF250]

Keep em coming! Love the DBFam

[@tavio5574]

Nothing like getting home from work to some DBG, time to chillax!!

[@promotiveeng]

What’s up with the ef sedan?? You get that thing running yet?

[@LooseFab]

i just got some dirty dingo mounts for the LS swapped datsun im building over my channel. glad to hear they fit up well for you!

[@tegnando2697]

Yes sir 💯💪🏼

[@SuperPanza]

Dang that fight 🎉

[@75rdube]

Pick up some 90° ends for your plug wires.

[@madscientistmotorworks7621]

Can’t wait to see this and the Colorado running. By the way, quick question. I was one of the hat winners from the Ruckus raffle. Just wondering if you shipped them out yet cause I may be moving soon so I wanna make sure it goes to the right addy.

[@reginaldgarcia6699]

Yeah DBF

[@janvos4375]

Its coming together. ✌🏻🇳🇱

[@GlassWerx]

Find u some plug wires that have 90 or 45 degree boots on them. I had a square body s10 blazer like yours with 350 swap and that's what i had to use bc same issue woth steering shaft hitting the plug wire booy

[@Juancho0524]

Need to get your zinc coating perfected and freshen up all the bolts. Looking good tho!!!

[@drdeath8179]

My boy had a 350 in a s10 blazer back in the day shit was lit

[@cbdreamer1709]

Pro tip on the an line. Tape it

[@MegaSpool]

I didn’t have any luck with those valve covers. Mine leaked bad, bad. I would up getting a set of summit cast ones.

[@AntonioEscobedononidajesus_]

You should have parker make the hose for the high pressure side

[@rico55pr1]

Or ptfe 6an

[@AntonioEscobedononidajesus_]

@hector leon yes the regular an hose will burst

[@Fackler91]

Motion got the value covers

[@victorwilks88]

I'm here for puppas!

[@josebeltran702]

MSD plugs will work for the LS swap

[@ricardorey5]

Those an fittings are rated for the pressure in the p/s system

[@rico55pr1]

You want ptfe for the high presure side of the PS regular 6an can burst

[@kylesteigerwald7325]

Hey bro you can get a coil relocation kit, moves the coils off of the valve covers.

[@yagerontop4103]

Please put a sign skid plate would fit u from your past

[@Irrelevantskill]

Vibrant makes 90 degree stubby 6an adaptors for under 20

[@justinguarino201]

Multi deleting the break booster since the valve covers will stick out an additional inch causing that rear spark plug/coil pack to make contact with the booster?

[@mahdialsadiq349]

Look in to motion raceworks breathers

[@bobfeber1099]

You're gonna need to put heat shielding on that brake booster from all the engine heat so close

[@Dragonfabb]

You can get a valley cover with a vent

[@deadbeatgarage]

🤔🤔 oooh really? I'ma look that up

[@nicholasmacausland]

Motion race works has bolt on catch can ports that are baffled

[@life.is.to.short1414]

Bro, you should of zinc plate your bolts.

[@trentdawg2832]

Are those AN lines gonna hold up to that pressure from the power steering😮😮😮

[@fernandocordoba-silva4858]

First comment db fam

[@davidsilva2318]

we need a daily toby cam

[@4475sk]

#dbfam

[@danielramsay2680]

Be good for hardware to have a electroplated setup aye

[@montemoe]

Link for the -6an kit

[@andresaguilar9016]

Paint match the crank pully gold or black

[@nicholasstringer8025]

Just get a coil pack relocation kit and spark plug wire clearance problem solved

[@trailerTrash104]

What happened to the big dog

[@Mrs3Diddy]

Anyone else catch that the valve cover didn’t have a oil fill

[@DXsal1]

It does actually

[@101CLOUD]

Look up at ATI the do v8 parts

[@acef_performance8416]

Looks like you could of just cut them down and redrilled the holes

[@GlassWerx]

Awesome. Was bored lookn for something to watch