NEW DJI FLY 1.13.9 - DJI Mini 4 Pro / Air 3 HUGE FIRMWARE UPDATE!

[@DMProductions]

Really good to see even more updates and support on these drones! Get my DJI Settings Cheat Sheets here - CHEAT SHEETS + LUTS - dmprovisuals.com

[@imLwz]

I tried to do the update and it crashed my controller and now when I turn it on it just says Device is Starting... and won't go past that. I had my drone on and was able to control the tilt with the slider on the top of the controller. I downloaded DJI Assistant 2 and updated the firmware on there twice and still just says it's starting. Do you know what I can do?

[@AndrewSOlis-nz5fu]

me too this update is crap it doest work for me

[@imLwz]

@@AndrewSOlis-nz5fu I had to turn my controller on and swipe down to get into the system setting where you can turn down the brightness and volume, go into setting and did a factory reset. That worked for me

[@DMProductions]

🚨 DJI FLY has been updated overnight from 1.13.8 to 1.13.9 - the new features are exactly the same as 1.13.8. This was just a bug fix 🚨

[@mobilehomer7582]

.9 also removes the Sync Logs option for us in the United States.

[@_Jksn_Twrs]

Good afternoon Dm Productions I did this new update to my drone and after this I get this message 🟡Aircraft not in flight. Vision and obstacle avoidance disabled (Code:180059) ⚪️Remote ID functionality normal (Code:1B080003) How can you help me.

[@jawshua08]

how bad was the wind in MPH to where the mini 4 pro couldn't handle it?

[@Moqui10]

Maybe they fixed the pitching/bucking in slight head or sidewinds that a lot of us have been experiencing?

[@jsauerii]

I have been wondering if others have this issue, my mini 4 has had it since I got it, I swapped up from mini 3 and it was never like this. It was the worst ever today, thing acted like it was having seizures. I thought it was coming down...

[@johnmajka5404]

​@jsauerii I pretty muched stopped flying my Mini 4 pro, & mostly I've been flying my AIR 3 because of that bucking under acceleration.

[@MrPlaneTalk]

On Mini 4 Pro, I think one can MANUALLY update the “Home Point” at any time to be the current location of controller, but is there a way to have RTH continuously update home point to be the location of RC controller?

[@naebadyersel]

Does the software update allow you to invert the vert stick? so down is up and up is down?

[@clackersclarke4450]

I got your Air 3 cheat sheets awhile back. Just wondering if there is an updated version since all the extra added features?

[@MrExel47]

Just updated my Air 3 firmware to 01.00.1400 and the controller to 02.02.0200. Max altitude was 1000 m (Germany) before the update, now it´s just 500 m.

[@MrExel47]

Short Update: My drone can still fly up to a 1.000 m. The 500 m limit was due to a restricted area.

[@sudrallye]

Is it ok for mavic 3 pro ?

[@steveemary4447]

Just did the update and noticed the green position lights go off the minute you hit record. Not a biggy but was shooting a night scene and all I had was my strobe light.

[@Andyk10101]

Under settings, Safety, Aircraft LEDs select on. In Auto mode turns off front led's when recording or taking pictures.

[@steveemary4447]

@@Andyk10101hey Andy, there is no aircraft LED’s per se to switch on, there is Auxiliary LED which is the light on the bottom of the drone used for landing. That I have set to Auto, and works just fine.

[@Andyk10101]

@@steveemary4447 Found it, Thanks.

[@FlydreamMedia]

I'm still rocking my mini 2, but need to upgrade for jobs. I'm torn between the older mavic 2 pro with the hasselblad, the mini 4 pro or the air 3. Opinions?

[@DMProductions]

Air 3 dude

[@mikesmith1290]

Second that! My Mavic Air 2 is great, and they only got better on the Air 3. Perfect price/performance ratio

[@stevenparker4378]

Dont see this on my controller yet

[@dazzpol]

It’s showing no updates on my air 3. The mini 4 pro has updated today though

[@imLwz]

Might have to force it like I had to do for 2.0.000 or whatever that last major update they did for the time it took the drone to turn on

[@dazzpol]

@@imLwzI tried all three methods for updating. Nothing on any yet

[@dkny2980]

Mine not showing up yet either. Is it only in the UK?

[@Tony_33]

Didn't show on mine until clicked 'check for updates'. Took about 30mins to download and install. I'm in the UK.

[@Stefan_Boerjesson]

Time 08:34, Vision Positioning and O S... Turning that off, "parking" the drone in the air, bringing the hand under it, downwards make "hand catching" very easy. Don't grab the drone until the props have stopped.

[@DMProductions]

You could just turn the Obstacle sensors off and do the same thing for a hand landing

[@Stefan_Boerjesson]

@@DMProductions I thought that was what I'm doing.

[@brendanmaclou2108]

Have you had any issues transferring photos from the drone to ur phone? I can't seem to do it.

[@kaotic345]

I'm in the uk and this isn't available for my mini 4 pro yet. I states i am on the latest firmware. Is it a staggered release??

[@DMProductions]

Possibly , they sometimes do this but it was available yesterday evening

[@KarlBerlin]

It's not available in the US yet

[@boybrownvr6522]

I just turned on my mini 4 pro in the UK and it's not available to me either.

[@DMProductions]

Give this a try too kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@BenThomasDecorating]

Hi Darren what is mind blowing me, all the different software plugins like artlist and motion ray and with your luts which software are they all compatible with and Which one do you recommend? Cyberlink Powerdirector Final Cut Pro, VN, Adobe Premier Pro or DaVinci Resolve, Luma Fusion.

[@DMProductions]

@@BenThomasDecorating hey premier pro, DaVinci resolve and Final Cut Pro are the best and industry standard with the plugins and luts working on all of them. DaVinci is free and fcp has a free trial. All the mobile apps are good but the process takes longer.

[@BenThomasDecorating]

@@DMProductions Hi Darren thanks for advice on editing software most probably will get both, Final Cut on the IPad and Davinci on the desktop and IPad.

[@Kees247]

No update in The Netherlands. Can't make a timelapt clip, only get like 100 photo's :(

[@DMProductions]

Try this too kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@Ducati_V4S]

I did update it today. When I did fly it today, I had issues. The quick shots function didn't work properly. The transmission of the video from drone to my RC-2 controller use to be lagy. This update not good😐 Also, my friends has the same problem.

[@TravelAdventureFunTAF]

it's not available in Canada yet

[@jupiterssixthmoon3402]

How do you turn on that black and white camera?

[@takeoff1999]

left lower corner, 3 options. MAP, COMPASS and b/wCAM. just wipe btw them.

[@kam11241]

hello, is the bike like a circle around the object as hyperlaps with checkpoints?

[@kam11241]

mavic 3 air

[@nsvaluto48328]

Do you know about the 30m high and 50m out in the last update?

[@enesengin.75]

Hello. I have an Air 3 device. The firmware is 01.00.1300. I want to FCC hack but the version is not supported. How can I change the firmware to 01.00.0300 or 01.00.0200?

[@miguelgarcianaude8464]

The update doesnt come to the Mavic 3 Pro, but do you know if this update will be coming to other Mavic 3 models?

[@craighailstone4399]

Won’t let me do the update all I keep getting is checking battery level takes a min or restart device, done and done, still won’t let me do it 😢 any help would be great

[@DMProductions]

Does it show firmware available ?

[@Lucky-Lucy330]

A question for you which filter is on the air 3 the color white have not seen that Thank you

[@DMProductions]

It’s the Polar Pro one ☺️

[@aw.pixotica8121]

I got this drone. Used it and made quite alot of content. Amazing results. Highly recommended drone. ❤

[@jsauerii]

Update, After posting I tried again, both are now available. 21:40 CST June 29 2024 842.73MB The drone is V01.00.0600 - 378.22MB and the RC 2 is V02.02.0200 - 464.51MB Again mine will NOT update without going to the profile route, nothing auto. And even then it still wont update the drone itself at all. What it did do however was return the slow load up time of the previous version of the RC2 and i often cannot switch back from video to photo mode now with the buttons. Laggy as heck...

[@DMProductions]

Oh no, have you tried restarting it and removing cache

[@jsauerii]

@@DMProductions You might have missed the update, that it finally worked right after I posted. I posted which versions I was able to get.

[@douchebaggins7]

Last update I did they killed the ability to to use after market batteries which worked much better than the o.e ones.

[@CNC-Lasercraft]

No update available here in Switzerland 😢

[@thomasforsberg8914]

Same for Norway. Got DJI Fly update, but not firmware update

[@DMProductions]

Try the about tab under the profile settings and click check for updates kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@thomasforsberg8914]

@@DMProductions got the update today, so guess they open it up gradually to avoid server capacity issues, it is a pretty big download.

[@Andyk10101]

I lost the Remote ID in Settings, Safety. Not showing up in US version App Version 1.13.9 and Aircraft version 01.00.1400 and RC version 02.02 0200. Any idea what happened to Remote ID?

[@Andyk10101]

Anyone else experience remote ID dispersing?

[@Blue-Marble-Videos]

Regarding the 'enhanced transmission.' For this to work correctly from my understanding you would actually need *two* different dongles. One in the controller, which is the one pictured in your video, and one on the drone itself. The controller one will work as is to connect your controller to a cellular data network for maps, etc, but your connection/signal to the drone doesn't change. If you have the drone dongle *too* and, the necessary dji subscription along with your mobile/cellular data plan and sims for both (and only if you're in mainland China at the moment) then you'd be able to control the drone from your controller through the cell network to your drone. I hope we see this in other countries soon. It'd help with connection issues in built up areas for better range.

[@geofflittler2035]

I think that the dongle is intended to fit in the drone. You then connect your controller to your phone hiding your phones 'mobile hotspot'facility. When you get signal dropout between the drone and the controller the 4g connection takes over. I could be wrong but I cannot think of any other possible scenario.b

[@streetsofbath]

just got the dongle 2 installed and only red no service light showing, because no sim installed, got a sim coming in a few days, do you need to have data available on the sim ? or will DJIs free first year of enhanced connection take care of that ?.

[@w.e.s.]

U have to put data on the sim. Through the phone company

[@streetsofbath]

@@w.e.s. thanks, hopefully the Three 10gb will be enough then, going to need 2, the cradle for the mini 4 on pre-order but should be here next week. so, i wonder how much dji will charge for the service after the first year? on top of the data price.

[@streetsofbath]

update: just got a free three sim, no data or minutes etc, put it straight from the packet into the Dongle 2 and have been flying around with full 4g ground and aerial service

[@joypaddad2386]

Have you got a video on 03 and 04 signal? cant seem to find much on it. we know 04 is better but id like to know more of the tech behind it and how much better is it

[@Madbomber2024]

This may seem like a really unusual idea for a future firmware update. But I'd like to see a video editor that uploads videos directly to KZbin and TikTok from the RC2 controller

[@FlymyPhantom]

flyshare to a phone with the DJI app on it.

[@GetUrOwnHandle]

​@@FlymyPhantom what about removing the HUD?

[@leemoore01]

I’ve update my RC2 controller on my mini 4 pro to 1.13.8 but the RC2 of my Air 3 will only update to 1.13.5 . I’ve tried updating with the DJI Assistant . Any ideas ?

[@leemoore01]

Third time trying the update and I’m up to 1.13.9 on the RC2 now 😊

[@dronecontent]

Hi I download the new update my app is glitching on the DJI rc2 it's like few frames and then it catches signal again. and in waypoint it adds like another mission even though I didn't do it . And it gets VERY VERY hot

[@WhatAWorld99]

Great content. Any thoughts on whether DJI will release a mini 5 in 2024?

[@TanNguyen-dj4js]

What does the enhanced transmision help?

[@jasonlee4267]

4G signal, so effectively you could fly the drone anywhere there is a mobile signal, game changing for signal coverage and around built up areas

[@geofflittler2035]

I don't suppose you have any idea about battery life compromises if and when using the dongle? If you are flying and never get low on RC to drone connection will you still lose some battery life as theoretically the dongle will not be in use during any part of the flight? Do you use your phones mobile hotspot to establish the 4g connection between drone / dongle and controller? Sorry for the daft questions 😮

[@w.e.s.]

5g wouldn't effect the battery no more then 1 gust of wind. I'm taking about a 5 mph gust and gone.

[@geofflittler2035]

@@w.e.s.If that is correct then I want one. The thing is though I read that a 'standard' flight of approximately 30 minutes that consumed 1 battery will require approximately 1gb of data. If that is the case then using 1gb obviously requires power over and above what is normally used on a flight. Nobody at DGI seems able or willing to commit to an answer about how much extra battery is consumed.

[@friedrichhienz2738]

I bought the Air 3 last week and unfortunately discovered during my first few flights that the obstacle avoidance sometimes didn't work at all or didn't work properly. I was also in normal mode sometimes but the drone behaved like it was in sport mode. Any ideas why this could be? Great video as always!

[@DJISupportGlobal]

Hi there, we apologize for the inconvenience caused. These is how the obstacle avoidance works for DJI Air 3. -After enabling "Flight Assistance" -> "Bypass", the aircraft will automatically change and plan a new flight path to bypass the obstacle if it detects an obstacle. If the obstacle cannot be bypassed, the aircraft will hover in place. -After enabling "Flight Assistance" -> "Brake", the aircraft will brake and hover in place if it detects an obstacle. -After disabling "Flight Assistance", all obstacle avoidance actions will not be triggered when detecting an obstacle, and the aircraft will respond to the user's control stick input. In this case, it is possible that an accident may occur. I hope this helps with your concern. Thank you for your support and have a nice day.

[@friedrichhienz2738]

@@DJISupportGlobal hi there, I had set the drone to brake, but I was able to steer it towards a wall without any problems. The bigger problem was that I was in normal mode and the drone was somehow still in sport mode or behaved like that. However, I flew it again the next day and the problems were no longer there. I hope it doesn't happen again because I obviously want to rely on it without having to test every time to see if everything is working as it should.

[@DJISupportGlobal]

​@@friedrichhienz2738 I appreciate your response. Can I just confirm that although you are in normal mode but app shows in sport mode? Also, do you fly in low-light situations? I'm glad that the issue has not recurred.

[@friedrichhienz2738]

@@DJISupportGlobal The switch on the rc was on normal mode(it also said „n normal mode“ on the screen) and the drone flew like in sports mode, extremely fast and agile. Even when I switched to cine-slow nothing changed. I flew in the evening but it wasnt really low light, around sunset but more then bright enough in my opinion. Thanks for your answer!

[@npr1300A8]

Why does everything need updating if it's working fine? I just think that updates eventually render hardware unusable? Windows 11 and hardware in PCs and laptops comes to mind.

[@DigiDriftZone]

My Mini4 Pro is saying latest available is 1.13.5, I guess I'll try in a few more days.

[@theFrostySurvivor]

Does the Mavic 3 Pro actually need an update? I'm still thinking of getting one. Maybe they are getting ready to release a Mavic 4 and are waiting for that to update the 3.

[@johnmajka5404]

After the last update my AIR 3 has been slight glitchy, like when Im zooming out from 3x to 1x it started catching around 1.8 sometimes & would look like a stutter.. also when panning from side to side sometimes it would kinda glitch. This only started happening after I updated tbe firmware like 12 days ago. I just updated the firmware to this new version today & hopefully this fixes those glitches.

[@simonlongman4509]

Have you still got the air 2s because it seems since the last update for it they've stopped the quick transfer but on their website it still says it's compatible four quick transfer🤔🤔 DJI need to sort there 💩💩out.

[@fabiomatosinhos5104]

Hello! Did they fix the “H” icon (AR) that sometimes disappears from the screen?

[@DMProductions]

Ooo good point

[@photofloh_yt]

Thanks for the video but the update doesn't appear for me it always says fw is up to date which is not the case. I also tried with the DJI assistant on the Mac and I'm only offered the 0500 and not the 0600 and fly 1.135 and not 13.8 does anyone have an idea?

[@useryggfdcc]

Any good update for the mini3 Pro? Still very happy with my mini3 Pro.

[@takeoff1999]

prob not, bec an update on mini3p cd ruin the sales of the mini4p... economicly common sense. maybe u wait until the mini5p comes out to buy this one. im happy with my 4p but kept the 3p as reserve drone with max alt 500m.

[@DMProductions]

I think aside from bug fixes they won’t offer anything new to the mini 3 pro, it’s an awesome drone and still is but doesn’t make business sense to give it new features when the 4 is out unfortunately

[@Joseph-bh7kx]

I have a problem with videos when i change to vertical video . The video has like waves

[@donaldmcgowan2464]

I just did this update on my mini 4 pro And RC2 controller and it created a problem that I never had before. When I open waypoints and select a flight path that I had already created, it immediately goes to a black screen and bumps me out of the waypoint function. Now, I'm hesitant to even fly the thing for fear of a malfunction in flight. Any suggestions?

[@bartontb]

Yesterday I updated both my RC2 controllers to 1.13.8. I now have the identical issue you mentioned - on both controllers. Contacted DJI tech support. Would not hurt to have more people rattle their cage on this issue so it can get fixed!!

[@chrisedwards5090]

For the 4G modem, are there really many places in the UK where the normal RC transmission is insufficient, whilst maintaining VLOS? I'm guessing this 4G option is aimed at operators with special permission to fly beyond VLOS, or possibly countries without VLOS regs, if such exist. I honestly can't see you or I having a legal use for it any time soon.

[@pedroafonso1613]

Hey quick question: Why buy an Air 3 if an Air 3S/4 is coming out in the next 4-8 weeks?

[@DMProductions]

You just know more secret info than me 😂

[@TruthAmongstTheDeception]

This is available in the US.

[@nexusgrey]

Update being pushed now in the USA

[@CraigScottProductions]

Does this fix the possible DJI ban

[@johnarthurs737]

Well I honestly wish that DJI would bugtest their updates before release! I've just carried out the latest update and now the RC2 controller won't connect to my mini 4 pro. What an absolute piece of crap and where do I go from here. Any useful advice would be appreciated 😢

[@jack-e2e8j]

I dont find any update on my mini 4 pro even when i went on setting and then about . Also i checked check for latest update it says its upto date updated. Since i updated the last update from dji

[@DMProductions]

What country btw ? Check in settings the about tab and then click dji app and see if it says up to date, then try update firmware

[@jack-e2e8j]

@@DMProductions i am from nepal🇳🇵 I tried it but it says upto date but its in last update.

[@stevieclair9188]

Hiya there m8love your channel,I recieved my cellular dongle2 today....have you got yours yet?was wondering when you would be doing your review if it?,regards frome stevie in Edinburgh.

[@DMProductions]

seems Scotland have faster delivery than England lol

[@gavinvandam3469]

I saw the firmware update was available on my RC2 last night, I did not update and today it's no longer available? Any ideas?

[@DMProductions]

Try this kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@bartontb]

Be thankful they pulled it. I updated two RC2 controllers and now can not create/save/edit waypoints.

[@N2yf]

How to off led green ? Mini 4 pro

[@zimbaliestate]

Thanks for the info. It seems DJI has now pushed out app version 1.13.9 - so that's changed form 1.13.8 in the last few hours. Have noticed that the 1000m height restriction has been reduced to 500m - not sure if this a country specific change or if it applies globally. No crashing on my controller but it was plugged in to an external power source at the time of the update ..... who knows, maybe that makes a difference? Everything else appears to be "normal" so far.

[@DMProductions]

Yes 1.13.9 is exactly the same just a but fix

[@mike01mike]

I'm still at 1.13.0 and don't see any updates available. I'm in Spain. Anyone knows why?

[@jameswallo5900]

I'm not sure if it's a coincidence but with the new update I am able to go at least 2000 feet farther in the city then I was able to get with any other update… Not sure if conditions were just right but I think they might've boosted up or fixed transmission power somehow

[@ldmndz4652]

No wonder DJI is having a current sale price point on the Air 3?...there are rumors for the potential DJI Air 3S/4?..maybe in August annoucnement according to some leaked photos and rumors..lol me personally all I want is an Air 3 model or whatever they will call it..with a variable aperture..gladly pay an extra price point for that feature!..lol

[@DMProductions]

If they added that nobody would buy the mavic series , air 3 is so good

[@ldmndz4652]

​@@DMProductions thats true..yeah then the price point might get a little to close to each other..lol but just the convenience of it would make it so much nicer..lol instead of putting on ND filters each time..lol but then again the Mavic usually has the better sensor size, camera, larger body to handle the elements etc. So there is still big separation in class..for consumers to choose and for those that want the "flagship" Mavic drone..even if they added the variable aperture to the Air series..lol

[@jens.reinhardt]

Is this 4G Dongle bringing the drone over the limit of 720g ? Or is there now problem with that?

[@jasonlee4267]

the dongle weighs 16grams with a sim card so yes it will put the air 3 over 720g when installed

[@jens.reinhardt]

@@jasonlee4267Is it allowed to fly with that weight without problems?

[@jasonlee4267]

@@jens.reinhardt you can fly without problems, but will have to check local restrictions/drone rules, each country will be different, so will be best to check local rules before purchase

[@prowler305z]

Not available in US yet

[@Yasovlog.]

i'm using a mini 4 pro and I can't find a suitable simulation. Does training via simulation have to be special only for those who use fpv drones? nonsense!! ( thanks for the video )

[@remygerain1365]

hi from france ... just updated but my app version is 1.13.9 not 8 !!!???

[@DMProductions]

Just a bug fix exactly the same

[@darthvaydr]

I just bought my brand new Air 3 yesterday. I did all the firmware updates for the controller and each battery last night and right after I finished doing that I got prompted to do another update lol Love your channel man! Thanks for all the great videos and keeping us informed!

[@DMProductions]

No problem 😌

[@blueskydestinations]

No update (UK) showing here yet

[@DMProductions]

The this too kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@FlymyPhantom]

It seems this update has been pulled, this usually means that DJI found an issue, fingers crossed they sort it out

[@DMProductions]

Try this too kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@davidwignall55]

just did the update, RC is now saying firmware up to date but showing versions as 01.00.0500 and 02.02.0000 - Any ideas?

[@DMProductions]

Try this kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@davidwignall55]

@@DMProductions Weird, didn't get as far as trying your suggestion but when I booted up the day after I was offered the update!?

[@charlesdove1345]

This is so cool! Great video Darren

[@DMProductions]

Thanks so much!

[@Starshine-Distillery001]

No updates in Canada as of 2:00pm Fri, 28 jun.

[@DMProductions]

Hmm thanks for letting me know, try this too kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@cypher31337]

Trying to figure out how to set up a like small mesh network with sdr to get more range without modifing the drone or remote...... Lag would increase, but should be able to get as much range as your battery will allow and it wouldn't be modified in any of the hardware so plausible deniability or something like that you know wink wink

[@DanBrianGerona]

As of 2024 06 29, it is not yet available for my mini 4 pro. My location is Philippines.

[@lesliechristopher9071]

I am still on v1.13.5 and my firmware says that it is up to date.

[@DMProductions]

Try this kzbin.info/www/bejne/o3bTYnZmi5iqZ80si=FISBNxUJQc2Zcunk

[@photonatureengland8895]

I don't know where this 1.13.8 update is, but my Air3 controller said it's up to date with 1.13.5 Maybe it will appear in the next couple of days if it just comes out.

[@fairplayrandy]

Same here

[@madcat207]

Same here in the US; even checking through DJI assistant gave no results (yet)

[@Rushtik9506]

Mavic is expensive maybe that means it dont need to be fix when theres no broken in the firmware that need fixing

[@theairplaneman0]

Amazing video, mate keep up this amazing content

[@DMProductions]

Thanks a ton!

[@L5299Photography]

What’s the point of the mavic 3 dji ignoring every issue since release

[@DMProductions]

It’s a shame cos the mavic 3 pro is such a powerful drone too

[@joeypatrickhisola7057]

You just earn new subscriber 🎉🎉🎉🎉

[@DMProductions]

Yay! Thank you!

[@droniebalkans]

From Kosovo (in Balkans, Europe) I tried checking manually a few times now. It doesn't show up :(

[@tomburton3198]

Can you swipe up on the RC 2 Controller screen to get rid of camera details and telemetry yet?

[@WeretheRoberts]

Awesome review as always, brother. I’m not sure if it’s a US thing again but for some reason mine is saying it’s up to date still with the 1.13.5 and the older firmware. I can’t seem to locate the update. lol. Those voices seemed pretty depressed. Hahaha. Edit: I did find the 1.13.8 update on the iPhone so I must have an issue with my RC2 or something, eh?

[@DMProductions]

I think the dude has a mavic 3 pro lol

[@kerusso3568]

Same here, showing firmware 01.00.0500 rc firmware 02.02.0000. No update available, maybe has something to do with the Dji ban

[@davidpe76]

Same here in Sydney Australia, have Air 3

[@WeretheRoberts]

@@DMProductions hahaha. I bet he’d have a lot of enthusiasm in his Voice if he knew how to install the update. lol. Kerusso where are you located?

[@petarlazic6672]

Same here and just checked again, no update available.

[@NoahPlayzVR]

I finally got my mini 4 pro! I can finally use your gold luts that I bought on Black Friday 😂

[@DMProductions]

Haha 😝 that’s some pre order ! 😂

[@saucedo59]

hello. A new update 1.13.9 has been released and in rc2 02.02.0200 someone save something thanks

[@DMProductions]

Yes exactly the same just a bug fix

[@toekneewood]

Hi. 👋. Great video. Thanks very much. I noticed that you mentioned the “Return to home”. Not used that yet. I noticed that it says the drone will go up first. Then fly home. If there is a tree 🌳 or obstacle above the drone when I press the button. Will the obstacle avoidance kick in. Sorry if it’s a dumb question. Still learning and not trying to make an expensive mistake. Kinda Regards Tony

[@DMProductions]

Yes it will but that's why I always use preset, I set the RTH altitude before flight to Make sure its higher than any obstacles

[@dereksmith9448]

You the best

[@DMProductions]

🙏

[@dennydog]

No firmware V01.00.0600 in the US so far

[@MrEddieNunez]

6:00 being blown and Ai voice over 😮

[@DMProductions]

@@MrEddieNunez it’s honestly so cool you gotta try it

[@Pavehawkpilot]

I doubt this will come to US, FCC has to bless off on it and the way things are working I doubt it will happen

[@dereksmith9448]

Haha that voiceover is so cool!

[@DMProductions]

sure is!

[@dereksmith9448]

Can’t wait to get that dongle !

[@BlitzK]

3rd party sellers have been selling them in the states for a couple years now

[@airCK99]

can u use 4G dongle in us ?

[@don-xl]

@DMProductions Thanks for the update, Darren! Especially when it comes to checking the Obstacle Avoidance Action settings after the update. It probably would be best to do this after EVERY update. Hope things can settle here in the U.S. This whole potential DJI ban is nuts!! 🥜🌰🥥

[@PhillipSkraba]

You flew down Hollywood Blvd, at night, watching your back not to get robbed and you're calling this exciting. We need to talk.

[@DMProductions]

that was a different type of exciting

[@PhillipSkraba]

@@DMProductions Yes, yes it was 🤣

[@BrianKushner]

Yeah it's called the Mavic 4 Pro

[@colindobson4045]

Capcut does ai voice over its pretty good and you can use your own voice to