You always make me smile! Reminds me of watching my kids learn. Keep up the great work!
@KellyBuilds8 ай бұрын
Thank you so much!! I’m trying my best haha!
@eltay38 ай бұрын
Every tap of the hammer is just like a spot weld: another step on the road to experience. Keep at it, it’s the only way to get better. You are doing an excellent job on the learning curve.
@KellyBuilds8 ай бұрын
Thank you so much! I feel the same. Love feeling like I’m learning and accomplishing something ever day
@patrickmazzone90668 ай бұрын
Verry good welds getting there
@KellyBuilds8 ай бұрын
Thank you!
@patrickmazzone90668 ай бұрын
Your Welcome
@psnaith18 ай бұрын
keep it up, your rocking!
@KellyBuilds8 ай бұрын
Thank you!!
@roypearce69688 ай бұрын
Slow and steady but the more you do the better you will get. Cool plate.👍
@1936fordcrazy8 ай бұрын
Ive been in the garage sense i was a early teen, sparks and grinders freaked me out too when I got started. For me I had to jump in with both feet as my dad passed away and he was who was teaching me and doing stuff when I was too scared. Now at almost 40 welding and grinders are second nature so you will get there. A freaked out person makes poor choices like forgetting clamps. In those moments take a deep breath clear your mind and relax. You can do it.
@KellyBuilds8 ай бұрын
Yeah definitely need to re group before I do things
@jonwaigandt-palm14908 ай бұрын
It’s always best to clamp your work.
@jasonjones52138 ай бұрын
Great job, Improving for sure.
@KellyBuilds8 ай бұрын
Thank you!
@johnjackett31388 ай бұрын
You're doing good...I see You are more confident welding and it shows...and ya... the angle grinder can be a scary little beast but it's one of the most important tools in the shop...just be as careful as You can...They can bite....I know from experience....but You will learn.....just like the welding....better all the time
@KellyBuilds8 ай бұрын
Thank you so much!
@michaelgillespie12068 ай бұрын
You can learn it and do it just like anyone else, I don't know how to weld and I don't have a welder, but I wish I was doing what you're doing, I know where I could lay my hands on some parts, (a '40 Ford pickup) but I don't have any money either.
@KellyBuilds8 ай бұрын
Thank you so much!
@bimmerflex55268 ай бұрын
Safety first. Clamps are champs. Hair all tied up and covered. Bar was moving as nothing to support it firmly in place. Please please be extremely cautious and careful with any tools. Especially power tools at that speed. 🇬🇧❤
@KellyBuilds8 ай бұрын
Definitely need to remember the clamps next time!
@DCrockett18 ай бұрын
Good job! Just keep plugging along. More you do the more you progress. Travis wasn't born a perfect welder. And when I was working at the dealership. A mechanic working next to my bay was using a side arm grinder with a cutoff wheel on it, no gloves stubbed the cutoff blade! Then I helped him pick up 3 fingers off the floor. Just saying.😮
@KellyBuilds8 ай бұрын
Oh gosh!!
@johnkranz40048 ай бұрын
Kelly you did Great Just a suggestion watch the video and watch Travis he get comfortable then welds Great video
@KellyBuilds8 ай бұрын
I was pretty comfortable actually!
@mikedenson90638 ай бұрын
Great job.
@KellyBuilds8 ай бұрын
Thanks!
@maratinio8 ай бұрын
Такая ты афигенная😊❤
@TimBray-mz9wx8 ай бұрын
Hi from Australia. As others have said always try to clamp your work . I've been fabricating for years and thought just a quick small cut and bang. Trip to hospital for stitches and a tetanus shot. Work safe😊
@KellyBuilds8 ай бұрын
Oh gosh!!
@shamilnurutdinov55928 ай бұрын
Cutie ❤❤❤
@Jemini5538 ай бұрын
have you guys tryed asking Iron Trap Garage if he Mat might have some of those missing pieces reaonably priced or what ever ??
@KellyBuilds8 ай бұрын
I think my husband has
@dennissanborn31598 ай бұрын
your learning
@randymatheny86218 ай бұрын
If possible clamp it to a table or put it in vice
@KellyBuilds8 ай бұрын
I should have clamped it!
@mennovanrij93348 ай бұрын
Clamping is mentioned already. The reason you're uncomfortable with the grinder is because of the weight and the fact that it's too big for your hand. You're not controlling it. You have every reason to doubt this machine. A solution? There are grinders on the market with a so-called 'soft start'. The name says it all. And, did you try an air-powered grinder? These are less heavy (no motor inside), nearly all have a 'soft start' and you can also opt for a smaller machine: with more grip for your hand. And oh, I am from the '70s so to speak. My hair used to be nearly the length of your hair. Please, please, bundle it safely. One day, that bundle will save you a lot of trouble. Don't ask me how I know.
@KellyBuilds8 ай бұрын
I believe I have used an air grinder before, next time I need to just use that. To big for my hand and body, I totally agree.
@doracimoreira37456 ай бұрын
Muito bom🇧🇷
@KellyBuilds6 ай бұрын
Thanks!
@Jemini5538 ай бұрын
clamp down the work you are doing to the bench
@jonwaigandt-palm14908 ай бұрын
Watching you weld; you don’t look very comfortable. You may try sit when welding on your bench. Put less stress on your back
@mennovanrij93348 ай бұрын
Yep. You can make things a lot easier for yourself. Watch Travis' forearm when he's welding. It rests from his wrist up to his elbow on the welding table, giving him support, balance and comfort. I cannot clearly see how your arm is, but I guess that only your wrist leans on the table. Further: those pink nozzles: there are nozzles for sale with ± 5mm high notches. You can rest them on the metal you're welding for the perfect distance. It will improve your technique dramatically!
@Arnaud588 ай бұрын
It came out fine, but I think you lost about 1/8 inch... (the width of the cut)👴😉🤫
@craigculver28558 ай бұрын
You’re coming around, and speak more authoritatively. Don’t abandon the BMW. The 2002 is cool!
@KellyBuilds8 ай бұрын
Thank you!! I wish we had a bigger shop so I could work on it inside lol. Currently covered in snow
@micseph61868 ай бұрын
KZbin wants my comment to be different on your and your husband's channel.
@KellyBuilds8 ай бұрын
Not sure what you mean 🤔
@micseph61868 ай бұрын
For reasons known only to KZbin if I place the same comment there is a good chance they will not allow it. Giving my explanation counts as a comment and is supposed to help the channel.
@KellyBuilds8 ай бұрын
Noted. I appreciate no matter what you comment!!
@yobop60728 ай бұрын
.... where's the baby at?.... teach him to become a holder....😊