NEW GHOSTBUSTERS!

[@Pixel-dan]

Are you buying these?!

[@BowserMovies1989]

I might get the PKE Meter and the Ghost Trap for my Ghostbusters cosplay.

[@StandingUpForBetter]

Yes! I have my O-ring Ghostbusters pre-ordered as well. They look great!

[@ObsessiveGeek]

Definitely tempted

[@fencingsculptor]

@@Pixel-dan yes I have mine on pre-order 👍

[@fencingsculptor]

Yes I have the o-ring Ghostbusters figure set on pre-order, and backed the rwo-in the box Gaslab.

[@vengeance1701]

2 In the Box... I was a backer:)

[@Blackbird26155]

I wish I could have backed the trap and PKE meter. But I LOVE that it has an EMF detection mode cause that means you can actually use it to hunt ghosts!

[@comicbookfanboy2614]

And I just preordered the O ring Ghostbuster set. I was on the fence about it, but after seeing them in the video I know I need that set.

[@AdamusPrime24]

Ah, you know it's the best time of the year when the SDCC intros and outros are a part of Pixel Dan's videos \^^/ Also the Ghostbusters stuff is cool XD

[@GenX_Kid]

Would've collected the hell out of a 3.75" Ghostbusters line in '84 - still might collect the hell out of it in '24 lol

[@carlosaugustosoria4805]

Espectaculares esos Ghostbuster tienen un buen diseño y escala, de lujo 👏🏻🇦🇷

[@blisstrosity]

I bought them and have been wanting crossovers like these since I was a kid in the 80's. Captain America or the X-Men in this format would blow my mind.

[@bashcrash9148]

Already have these pre-ordered through Amazon to go with the Ecto.

[@LogicBlaster]

1/18th scale Ghostbusters toys.... let's goooooooo!!!!👍

[@WalterGrimsley]

This is like a dream come true- movie Ghostbusters in GI Joe format…I never would have believed. Hope they do RGB and GB2 repaints

[@georgepasymowski2508]

Great coverage man. Gotta get that set of o ring ghostbusters cause I already have the ecto 1.

[@NiF617]

these are incredible, i need these

[@awesomeadamfrom2099]

I love this Dan drop a like for you.

[@Justin-cx4oz]

You know you collect too much Hasbro product when you know that’s Emily’s voice talking. 😂

[@thatguysstuff15]

GIVE US A FIRE HOUSE SO I CAN GET BACK INTO GHOSTBUSTERS TOYS PLEASE !!! I m old school 80s and i wont even consider the figures without a playset !!!!

[@bjornjorgensen2220]

I already have those on preorder

[@robertwong2412]

So this is the 2nd time they confirm you can only fit 2 figures in the front of 1984 ecto-1.

[@MiniPainterGamerDadD20]

I wasn't super hyped about the O-ring set until I saw the box!!! Holy schnikes!!!

[@yellalot101]

That Plasma Pack looks so good!

[@benflay6038]

There cool those props

[@warrennewman5325]

Will def get these who u gonna call 👻

[@JoePal-c3n]

It’s really sad that all 4 doors don’t open. So I am still on the fence about buying it because of that lacking a normal side door like the vintage ghost buster Cadillac had. 1957. Who designs something without a back door that opens.

[@markheadley125]

Cool 😎 ❤😊😱❤👍👍👍

[@thinktwice3211]

2 in the box ready to go, we be fast and they be slow!

[@Andreas813]

I looked at the trap, Dan! 😶

[@christopherbandish6060]

I absolutely love the packaging on the o-ring set, but you should have asked her about the Haslab tease that was released a few weeks back.

[@automatticcomics]

Car was out in uk a few weeks back. Awaiting figs

[@robertwong2412]

Can't fit any in the back. Won't accomodate all 4 figures.

[@76highjinks]

Yeah I'm buying these they look they could have been made in 1984. Back in my school days aged 8 ,a kid when always lied tried to convince me these style of figures were out in shops here in the UK. Well now 40 years later here they are lol!.

[@abemartinez8844]

I seen that they are making the firehouse to go with the ecto-1

[@AmericanDischord]

Nice.

[@SlytherinReviews]

I want the OG Ghostbusters but I don't know the price in Australian Dollars

[@ryanspengler4877]

Why is it so somehow impossible to make an Ecto that fits the damn character figures properly?

[@Dilopho]

They're kinda cool I guess, but Ghostbusters need Ghosts to go with them

[@Cyril29a]

Are these 3 3/4 or 4"? They don't look like 6"

[@XavierRead]

Still waiting for Mondo's Ghostbusters.

[@alterclark1]

Nope! I need Dat mondo magic

[@priscillarodriguez6867]

I wonder if the thumbs will break off like the old gi joes did.

[@salvation7362]

They have them in box but they don't come out until next February and they already released the car... it makes zero sense.

[@austin316ification]

Hasbro isn't that interested in Ghostbusters. Look what happen to power rangers

[@vidal_rodriguez80s]

I'm more of a Real Ghostbusters toys fan.

[@MrTsToys]

Great video Dan. Love this scale, got two of the four packs preordered. Though I disagree about the fake weathered box. Too gimmicky. Hasbro has to stop that here and on the Star Wars Retro Collection line. Imagine if Mattel put fake weathering on the MOTU Origins line, or playmates did it with their TMNT reissues. Ruins a nice card back or box.

[@eye_made_this]

No ghost around there . Hasbro don’t make them … lolzzzz

[@wyldelf2685]

The scale is awesome ,too bad the Kenner versions were awkward large back in the day , , well they are likely going to be Limited Collectible priced $$ 😢😮 Wich means they will ALWAYS be out of my budget range at WYLD ELF26 , , ,so because hasbro will go for ultimate profit margin , very unlikely I can attain any of them in this shellshock 2024 economy 😮🎉😢😮

[@Fore-Four-Dee-Too]

I bought Ecto-1 and it was defective, the doors kept falling off. Hasbro couldn't replace it, saying it was out of stock even though it is listed as in stock on Pulse. I shipped it back for a refund, Hasbro told me my refund check is in the mail. That was three weeks ago. The whole experience led me to cancel my Ghostbusters 3.75 figures pre-order as well. Do better Hasbro.

[@ozzy9226]

The plasma series was so much better than these

[@ajax201000]

How many more version of the same Ghostbusters do we need? Some licenses need to ease up. tmnt is even worse, literally hundreds of version of the same thing.

[@toonytube2444]

I prefere the classic KENNER-figures.

[@michaelhuber9234]

I agree but the woman is telling nonsense just to say something. What we want is them not released every year again, we want them other great characters! Not the 4 again and again!

[@Tombstonecross]

Speak for yourself

[@goodygiggles5410]

I don't even want the four. I just want the OG three that opened the business of bustin ghosts!

[@ObsessiveGeek]

@@goodygiggles5410easy enough to throw away the extra you don’t want in a four pack

[@goodygiggles5410]

​@@ObsessiveGeekYeah, but if you paid for him, why waste him when you can use him for a little entertainment for your ghosts.

[@ObsessiveGeek]

@@goodygiggles5410 So you DO want the four then!

[@butwhydoe4020]

Bet she didn’t forget lunch

[@tetepeb]

What a sad life you must live...

[@butwhydoe4020]

@@tetepeb whats sad is she cannot operate the equipment she is tasked to perform. She is representing Hasbro in front of thousands of people for a scheduled event looking less than professional. Take pride in your self.

[@tetepeb]

@@butwhydoe4020 then write that instead of calling her fat without saying it directly.

[@simonb.8868]

America is literally the same 4 brands over and over since 1930. You leartn absolutely nothing from Japan

[@Zylo1111]

If it ain't broke... wait 30 years then break it.

[@hitfigures2759]

You mean learn how to do a space ninja? Or do you mean learn how to do a space robot?

[@simonb.8868]

@@hitfigures2759 learn how to create 1000 new comic / cartoon brands every year?

[@michaelc3977]

Really wish Haslabs would only have it's employees who are passionate about the Ghostbusters franchise promoting it, as their energy is very different to this womans. Was nothing learned from GB 16?

[@michaelc3977]

Wow, as the video goes on and she picks up the PKE meter she really demonstrates how she has no personal interest in Ghostbusters at all. Where is the guy who promoted this set with Adam Savage?

[@michaelc3977]

Clearly a great team working behind the scenes on these products at Haslabs, and it's such a disservice to everyone involved having this woman stand in front of the items, awkwardly fumbling them while she laughs at her own ignorance.

[@SirFunky]

if you watched any other video about this youll see the team behind this is very pasionate, alough yeah im confused how she hardly understands how to work the device after almost a year of working on it. i know she isnt involved with development but youd think she wouldve gotten it by now

[@thetruth1013]

Why is she still there?

[@thetruth1013]

@oppenheimer11 working in pr and care nothing about your appearance, working for a billion dollar company can’t even put a fresh pair of nail polish on?

[@BrooklynFirstTeam]

You're pretty much everything wrong with this hobby. ​@@thetruth1013

[@thetruth1013]

@@BrooklynFirstTeam You wanna present yourself like you don’t care about your appearance then get upset when someone tells you to care and I’m the problem okay guy

[@BrooklynFirstTeam]

@@thetruth1013 Yup, you are the problem. Take care.

[@SirFunky]

@@thetruth1013 i dont think it matters that much, im here for the toys not to scrutinise the PR lady