Check out my shorts for latest update on this grinder!
@markpx79 ай бұрын
Thanks for the review. By the way I figured out that all you have to do on the lock down levers is pill out on the lever and you can adjust it and then just let it back in.
@glennfelpel97859 ай бұрын
On that tightening knob handle you were complaining about. Try to pull it out and re-locate the handle relative to the threads. It may be like many other adjusters that it is on that spring so you can reposition it. Thank you for the video it is very well done.
@TheOGfrenchy9 ай бұрын
You are correct about the knobs! Thank you for the kind words! And thanks for watching!!!!!!
@MJFacas9 ай бұрын
Those handles pull out and allow you to rotate the handle independent of the bolt. If it holds up that will be a great seller for Grizzly. So far I have been impressed by their overall quality.
@TheOGfrenchy9 ай бұрын
You are correct about the handles forgot to mention that in the video, I too, am impressed with the quality to money ratio! Really appreciate you watching!!!
@noahkatz96169 ай бұрын
@@TheOGfrenchy In case anyone missed it, the point is that it didn't need to be cut off, just rotated
@knifeknerdreviews46099 ай бұрын
Ordered 1! I dont have 220v or a lot of space so this is exactly what I been waiting for...
@TheOGfrenchy9 ай бұрын
That is very well said and I completely agree with you and that is exactly why I decided to get mine. I am working out of a 8 x 10 portable shed in my backyard. 😂
@shawnglover8879 ай бұрын
Thanks so much for the review, this is precisely what I've been waiting for! No more scratching my head about whether to get a bucktool, harbor frieght, vevor, etc.
@TheOGfrenchy9 ай бұрын
lol very well said and my thoughts exactly!!!
@lovejcdc9 ай бұрын
I think that grinder is a solid good machine. Not only is a great option for the beginner but it would also make a great secondary machine for those who already have a 2x72 but don't want to constantly change the setup.
@TheOGfrenchy9 ай бұрын
Right!!!! Good point! Thanks for watching! 🤙
@ashscott60689 ай бұрын
The tilting platten looks like a really awesome idea for knifemaking. It would be so much easier to make a jig that just holds the blade vertically, and then you can adjust the platten to grind the bevel. Hell, you could just screw the blade to a block of wood and be done with it.
@Nanogrip9 ай бұрын
This is such a great value grinder with a lot of useful features for knife making. I have a Bucktools 2x42 at the moment, but will definitely be looking into getting this model. Thanks for the video, greetings from the tiny Pacific Islands of Palau!
@TheOGfrenchy9 ай бұрын
Hey thanks for watching!!! I don’t think you’ll be disappointed with the capabilities of this little machine!!!! It’s a game changer for me!!!
@philochristos9 ай бұрын
That's an amazing grinder for that price. It took me forever to go from the 1x30 from Harbor Freight to my first 2x72 because the price was so prohibiting. And when I finally got a 2x72, it didn't have variable speed, and it didn't go horizontal. I paid about $1000 for it. I would love to have had your machine. Congratulations. I'm sure somebody has mentioned it already, but you didn't need to cut that knob short. You can pull them out and turn them to whatever position you want so they don't get in each other's way.
@TheOGfrenchy9 ай бұрын
Thanks for checking out the video! I hopped over to your page and checked out some of your work! You make some really nice knives! Thx for watching brother!
@philochristos9 ай бұрын
@@TheOGfrenchy Thank you!
@agentcovert9 ай бұрын
I would bet a 2x48 belt would fit which is by far a more popular size of belt with a slew of more flavors including a leather belt strop..which is truly a game changer on sharpening.. the platen arm would need to be pulled out 3 inch..I'm not sure how much arm is in the body..but even if you had to make a longer arm to fit 2x48 inch belts it would be so worth it plus you could fit a larger contact wheel like maybe a 6 inch wheel..not sure if its big enough for a 8 inch wheel..without measuring it..amazon has cheapo contact wheels that should bolt up were the flat platen is..
@TheOGfrenchy9 ай бұрын
Thanks for watching the video and sharing! Check out my YT page I’ve got a couple more videos on modifications, talking about some of the things you just mentioned!
@TheOGfrenchy9 ай бұрын
And as it stands the tooling arm is long enough for 2 x 48
@HeavyForge9 ай бұрын
I thought about buying one just to keep in my forge to tune up punches and drifts and profile a blade before I bring in the garage to grind bevels on the 2x72.
@TheOGfrenchy9 ай бұрын
That would be a good idea and especially because of the price it makes it doable!!! Really appreciate you watching!!!!!
@dragonwing4ever9 ай бұрын
standard tooling arms are usually inch and a half or 40x40mm on most belt grinders. but overall for the money I'm pretty impressed by this grinder
@TheOGfrenchy9 ай бұрын
Is it the best out there? Absolutely not but for the price it’s a great option for people on a budget! Thx for watching and sharing!
@DavidMoonForge10 ай бұрын
Let's go dude! That's a nice step up from the 1x30. I'm happy for you 🤙. Hopefully Grizzly will make some accessories to go with it over the next year or two.
@TheOGfrenchy10 ай бұрын
It is light years better than the one by 30 that’s for damn sure!!!! lol as always really appreciate you watching my videos!!!
@kennethstaszak99909 ай бұрын
Those style clamp handles typically are spring loaded and can be reset for position by pushing toward the machine and rotating them into the desired position. The heads are internally splined to allow this.
@TheOGfrenchy9 ай бұрын
You are correct! Appreciate you watching!!!!
@dustinhatfield229 ай бұрын
Dang, I was hoping to get a video done on this before everyone hopped on them. Glad to know that the grinder is decent though! Gonna be comparing it to my old Wilton Square wheel grinder that is about to fixed up again to give people an idea of the strengths and weaknesses of each.
@TheOGfrenchy9 ай бұрын
That would be an awesome idea and a video I would enjoy watching!
@scottydudley57005 ай бұрын
Reversible option would be handy. Cool tool. Thanks
@TheOGfrenchy10 ай бұрын
Thanks for watching and I hope I covered the basics of this new grinder! Please feel free to ask any questions in the comments below!!! I didn’t necessarily need to cut off the handle as they “ lock and unlock” allowing you to rotate the position I just thought it would be easier.
@bbqhoncho27209 ай бұрын
I saw another bladesmith say there's an issue with the plate. He kinda breezed it and said it wasn't a big deal. From what I caught it was an adhesive cover attached to it. Did you have an issue with anything on the platem. Thank You for your videos, they are informative n good..
@TheOGfrenchy9 ай бұрын
@@bbqhoncho2720 there are a few minor issues with the platen the main one being that without modification you can’t hang the belt over the left side of the platen that is an easy fix though… and in regards to the adhesive thing… I believe he was probably referring to the way they put the graphite on the platen… it has a sticky back where you can take it off and put it back back on but I have had no issue with that! Hope that helps!!! Thx for watching!!!
@TheOGfrenchy9 ай бұрын
I have a quick video on my page explaining the platen solution if you wanna check it out?!
@darrellallen79319 ай бұрын
Good review of what looks like a great little grinder for beginners that’s a step above the 1x30.... earned a sub 👍
@TheOGfrenchy9 ай бұрын
Thanks!!! 🙏
@andrewmcgibbon97859 ай бұрын
Holy cow! All that for 3 hundo? Amazing deal. Your belts will be a little more expensive by sq inches compared to 2x72 because 2x72 is the more common industry standard. But you're saving big$$$$ over other 2x42 machines. The ability to tilt the machine 90° is great for knife makers.
@MSmith-jf5wo7 ай бұрын
Been waiting (more than 2 months now!) for Grizzly to get them back in stock...! I'd like to get a couple of them, so I don;'t have to keep changing belts/speeds/angles/etc. when making something. (Heck, for the price of 2 (and a bunch of belts), they would still cost less than a "fairly good" 2 by 72 inch grinder...! Thanks for the review on the New 2" by 42" Knife Grinder.
@TheOGfrenchy7 ай бұрын
No problem! Appreciate you watching ! Hopefully they will get them back in stock soon!
@woowaptibam52539 ай бұрын
Good review video! Enough info to give me an idea if it's something that i could benefit from while not going too deep.
@TheOGfrenchy9 ай бұрын
Thanks!!! Appreciate you watching!!! 🤙
@jameslydon33149 ай бұрын
This is a game changer, they're on sale for $270 right now. That's cheaper than the benchtop grinder variant.
@MasterBigBass9 ай бұрын
Just ordered mine today! Most excited for the VFD and currently using a Craftsman 2x42 I think 1/3 HP and is very fast so hard to control grinding bevels.
@TheOGfrenchy9 ай бұрын
Nice man! I don’t think you will be disappointed. It is a nice machine for the money!
@kylebird571410 ай бұрын
Glad I found this! I just ordered one but couldn't find any reviews.
@TheOGfrenchy9 ай бұрын
I appreciate you watching the video!!! I think you’ll be happy with the capabilities of this grinder especially at this price point! 😀
@Keith_the_knife_freak9 ай бұрын
Thanks for sharing. Nice looking grinder . Could be a game changer for a lot of people
@TheOGfrenchy9 ай бұрын
It definitely is for me!!! Thanks for watching!!!!
@mikemolina9499 ай бұрын
Appreciate you making this video.. I was debating whether or not to buy one since it’s very new . But after watching this video I was convinced so I’ve got one on the way to be delivered Friday! So thanks again . Definitely a good step in the right direction for beginners knife makers on a budget
@TheOGfrenchy9 ай бұрын
Hey, no problem glad you were able to get a quick look before you bought it. I even noticed right now they have it on sale for 10% off so now is a good time to scoop one up!
@mikemolina9499 ай бұрын
I meant to ask .. does the platen assembly move in and out or is locked in?
@TheOGfrenchy9 ай бұрын
@@mikemolina949 yes it does move in and out far enough to utilize a 2 x 48” belt as well
@motownman529 ай бұрын
Currently using a Grizzly 1x30 myself but saw this online and initially got super excited. When I started comparing it to other 2x48/2x72 machines or DIY plans I got a bit hesitant about the motor power. Personally I'd love to see you actually try to bog the motor down at a few different speeds because I have that issue with my 1x30 just like you mentioned. I even got some surface conditioning belts for the 1x30 and it can't even spin them without significant help getting it started. Personally I think I'd remove that top guard and use that wheel to grind my radiuses as I use the top wheel on my 1x30 for that purpose. The other thing I love is that its a great little entry into a bigger machine and it seems like if you really had the mind to do so you could upgrade the motor or make a new arm to convert it to 2x48 Thanks for the review and look at this! EDIT: I just finished that as you started up that motor and holy crap I had a what I'd call a Tim the Toolman reaction. I think I'm going to have to get one of these
@TheOGfrenchy9 ай бұрын
Lmfao 🤣 Tim the tool man Taylor …. Classic!!! I really appreciate you watching the video. I think in regards to modification it is definitely doable to upgrade the machine. I just posted a short of making a contact wheel attachment for it. I think for those who are serious about knife, making they may be a little hesitant, but for those who are hobbyist, knife, makers, or people looking to upgrade from the one by 30 this is definitely a contender! I do like the idea of trying to purposefully bog the motor down. I may have to try that.
@jordanjohnson72669 ай бұрын
@@TheOGfrenchywill yo make a video on the contact wheel?
@TheOGfrenchy9 ай бұрын
@@jordanjohnson7266 kzbin.infoLBiNsV5khNI?si=mTXoUkvRWRtF7XJB Here’s a link to a very quick video on how I made the contact wheel! And really just posted it to show that it can be done. I will probably re-make one with a better quality wheel soon.!
@ozarked23639 ай бұрын
Unfortunately I live in Springfield too. Every time I go in there I see another tool I want. I've been making knives for about 5 years as a hobby. I bought a Porter Cable 4 x 36 grinder first. Then I tried a Buck Tool 2 x 42 grinder. They both work but have limitations. Between the 2 of them I get by. Are the guards removable over the wheel above the platen on the Grizzly?
@TheOGfrenchy9 ай бұрын
That can be troubling going in there without buying something lol! I’ve never had a buck tool But have heard some good things about them! And yes, the guards are removable and it didn’t take long for me to remove them! I find it makes the belt changes quicker and gives you another radius for grinding! Thx for watching!!!!
@hotrodcamaro31449 ай бұрын
Can’t wait to get one of these for my little knife shop!
@TheOGfrenchy9 ай бұрын
Let’s Go!!!! You won’t be disappointed!!! For the amount of money …I think it blows other 2x42s out of the water! Thanks for watching!!!
@rottiejakeluke9 ай бұрын
WOW, my prayers have been answered. Thanks
@TheOGfrenchy9 ай бұрын
Those were quite literally my same words when I found this thing!!! lol Thanks for watching 🙏
@rottiejakeluke9 ай бұрын
Great minds react the same way.
@rottiejakeluke9 ай бұрын
@@TheOGfrenchy guess what? Just ordered mine.
@lovejcdc9 ай бұрын
Just found your channel today and enjoyed it. I subscribed and looking forward to seeing future videos with your new grinder.
@TheOGfrenchy9 ай бұрын
Thanks!!! 🙏
@d-arts71396 ай бұрын
wish those were available when i started 7 years ago! i might still get one. you should be able to take that platen assembly off that tooling arm and add a wheel. they dont even sell the tooling arms individually?
@mcrich19789 ай бұрын
These look promising, mine comes today and with some modding I can see this being a very versatile finishing tool for me since I already have a 2 x 72 . Consider 2 x 48 belts and attaching a TRMaker small well set on a longer flat stock receiver bar.
@TheOGfrenchy9 ай бұрын
Hey, that’s great to hear you know one thing I noticed after I put out the review is the flat platen that it comes with is definitely wider than the 2 inch belts, making it difficult to hang the belt over the left side of the platen.. I definitely plan to do some modification to that and really like your idea with a small wheel! Also I did happen to buy one 2 x 48” belt just to try it out and the receiver arm was just long enough! Like Jasonvillet I recognize your name from TRE lives! Thanks for coming to watch my video🤙
@mcrich19789 ай бұрын
@@TheOGfrenchy thats a good catch, my buck tool was the same way with that pad. I instantly removed that and made a platen for it. I can see the mods for this thing are gonna be fun! 😁😁 Jason and Erick are awesome peeps! And glad to follow you on yours 🤘🤘
@mcrich19789 ай бұрын
@@TheOGfrenchy hop on to the next live, hopefully Erick has it tonight. He has just out completely gutted the old shop.
@TheOGfrenchy9 ай бұрын
@@mcrich1978 will do!!! Thanks buddy!
@ashtonsummers96489 ай бұрын
I just got into knife making and have been looking for something to replace my harbor freight 1x30. I had been looking at the grizzly 2x42 I didn’t realize grizzly had a brick and mortar in my state, I’m from kc and I’ll definitely be getting one of these
@TheOGfrenchy9 ай бұрын
lol the ole brick and mortar! Yeah I want to say they only have two locations that I know about one is here in Springfield and the other I believe is in Washington… anyway I don’t think you’ll be disappointed. It is definitely a major step up from the one by 30! Good luck, brother! Knife making is a wicked fun hobby!
@johnconklin51809 ай бұрын
I’ve been wanting to become better as sharpening knives - mostly bushcraft and hunting knives. It would be helpful if you would be able to show us how to best use this grinder to put a good edge on a knife. Including the different grit belts that would be required to be used to create the new edge. In addition is there a way to gauge the degree of angle that comes with the machine? Sorry if these questions seem naive but like I said I am new to sharpening and just want the right tools to improve my skill level. Thank you, .
@TheOGfrenchy9 ай бұрын
Both of these are great questions and to your main point there are lots of different ways to gauge what angle you put on your edge, especially with this machine! Without the belt on, you could use a number of tools, such as a square level or digital angle guide to find and set the angle on your platen and or Work rest. Typically, if you’re re-sharpening a dull blade, you would really only need higher grits like maybe a 400 grit and 1000 grit.. if you’re sharpening one that has a lot of damage you might use 120 grit to get the chips out of the edge.. I’ll see if I can find another one of my videos where I am showcasing how I sharpen my blades and I know in that video I’m utilizing a different belt sander, but it would give you an idea on how I do it!!! Thx for watching!!!
@TheOGfrenchy9 ай бұрын
kzbin.info/www/bejne/qXm4oaefeKiBq80si=_pmw_KAUvZ4i6K48 Around the 19 min mark in this video I show how I sharpen my blades! Creative when coming up with your own system!
@johnconklin51809 ай бұрын
Thank you and I will keep an eye out for your videos. Have a great Thanksgiving!@@TheOGfrenchy
@TheOGfrenchy9 ай бұрын
@@johnconklin5180 thanks man I appreciate that! Back atchu! 🤧😂
@theriversexperience93839 ай бұрын
Get video man! I still haven't really got into mine yet lol. It's just sitting there on a milk crate.
@TheOGfrenchy9 ай бұрын
Dude!!!! Erick!!!! I am a BIG fan of your channel and work!!! Thanks for checking out my review! I hope yours isn’t a dud!!! I ll see you on the next live! 🤙😊
@Bottlemaker19 ай бұрын
Mine will be here Thursday
@TheOGfrenchy9 ай бұрын
Maybe I’ll go get a job promoting there stuff! lol thanks for watching the video!
@Bottlemaker18 ай бұрын
@@TheOGfrenchyI regret buying it now. Have babied the thing and first longer session on a chef knife for the wife’s Xmas present motor went out on me. I’m very very disappointed
@johnoddo821010 ай бұрын
Excited to see you make some shink shinks with your new grinder Matt!
@TheOGfrenchy10 ай бұрын
Hahaha shing shing!!! Appreciate you watching brother!!!🤙
@roydawson48829 ай бұрын
To get one of those in uk would be over 1000 dollars, good tools are very expensive in uk.
@TheOGfrenchy9 ай бұрын
Dang dude!!!! That is unfortunate sorry to hear it’s a lot more expensive to get it where you’re at. 😢 thanks for watching and sharing!
@user-mh6wh1wk2k9 ай бұрын
I noticed when you first started grinding that the tool rest shifted a little. Presumably it wasn't tightened enough since you came back and took the wrench to it. What do you think is the long term outcome of these adjustments on the screws? Do you think do you think they are beefy enough to maintain the ability to keep the tool rest solid and at the exact angle you need it or do you think you'll be warping/stripping the threads over time thereby leading to a mushy tool rest that moves as you use it? Also, can you comment on that same issue as it applies to the other adjustment knobs?
@TheOGfrenchy9 ай бұрын
That’s a great question! First off when you saw the tool rest move, it was indeed, because I did not have it tightened down good enough… and I think it’s really cool to have all those different adjustments but to your point since they’re using a little Allen bolt to tighten everything up I think overtime eventually they may begin to lose their holding power… I think it’s apparent that the company wanted to make a machine that filled this niche of more grinding options, angles, adjustments, ect but still keeping it at a lower and affordable budget and to be honest the Work rest is probably the most disappointing part of the entire grinder as it is small and you have to find the Allen wrench before making a minor adjustment. Hope that helps! Thanks for watching!
@TheOGfrenchy9 ай бұрын
The other adjustment knobs utilize the same size Allen bolt the only difference being they have the locking/unlocking black handles on the ends, which make them more convenient… and based on the thickness of the plate steel that the holes were tapped into, I could see the bolts stripping before the holes in the plate steel, in which case you could potentially replace them
@dragonwing4ever9 ай бұрын
worst case you could always fab up a fixed work rest so it can't move and keep that one for when you eant to set specific angles rather then freehanding
@jacobkoen89949 ай бұрын
Wish that was around when I first started!
@TheOGfrenchy9 ай бұрын
Right! I feel happy to have found it! Thanks for watching!
@ryanblystone51539 ай бұрын
Thank you
@andrewmcgibbon97859 ай бұрын
Graphite on the platen will make your belts run cooler. The downside is thats its a softer surface and is going to abrade away over time.
@TheOGfrenchy9 ай бұрын
I kind of figured that’s what it was about. Thanks for the info and thanks for watching!
@bawdydog1769 ай бұрын
Grizzly = Harbor Fright II, The Sequel?? Edit: VFD at that price point is very cool. Metalic dust in the air is definitely hard on such things. May want to look at putting it in an enclosure.
@TheOGfrenchy9 ай бұрын
😂🤙
@ironmikelo.88399 ай бұрын
Just ordered one today they were on sale and got 5% off for email sign up what belts would you recommend also I’d like a couple of leather ones for stroping tia
@TheOGfrenchy9 ай бұрын
I would recommend getting all kinds of different belts and seeing which ones you like the most! Also you should get at least one 2 x 48” belt and see if it runs well on your machine… It ran on my machine pretty darn good, and that would certainly open up other options as to what you could get! Thx for watching!!!
@ironmikelo.88399 ай бұрын
@@TheOGfrenchy Didn’t know the bigger belt would fit, what’s the advantage of that?
@TheOGfrenchy9 ай бұрын
@@ironmikelo.8839 well, technically two things one being that a longer belt doesn’t heat up quite as fast and two… it gives you more options to buy belts. Some suppliers only carry 2 x 48“ belts!
@MisterDeets8 ай бұрын
I've seen quite a few bad reviews of this unit both on the Grizzly site and also here on youtube. Many mentions of the motor and the controller smoking and then giving an error and not working from that point on. I would really like to have one of these if they were reliable and durable. Any word on the teething pains that Grizzly is experiencing with these?
@TheOGfrenchy8 ай бұрын
I spent a little bit of time emailing customer service, and the guy I spoke with said that they are ordering more motors for those who have had problems… customer service with this company at least in my experience is really good. I would not let some peoples bad experiences, shy you away from getting one. This is really the best option for this price point and if you had any problems, I’m sure they would make it, right. That’s just my opinion though and I am certainly not an expert. Just a normal dude. Thanks for watching and sharing!
@MisterDeets8 ай бұрын
@@TheOGfrenchy Good to hear. I will purchase one.
@jonleone7779 ай бұрын
These units are having issues with the motors getting hot and burning out pretty quickly.
@TheOGfrenchy9 ай бұрын
Ya I’ve heard that from quite a few people now hopefully it’s isolated to just some a just faulty parts either in the motor or the VFD… thanks for watching and sharing!
@opa_plays_mw53187 ай бұрын
Got one on back order. Is the table beefy enough for grinding jigs? I highly recommend bringing it out to the table edge and putting a water filled catch bucket under it. Even my HF 1x30 can get a fire going doing high carbon shaping.
@TheOGfrenchy7 ай бұрын
The table is one of the disappointing things. It’s very small, and will not be big enough for a jig, but is easily modifiable. Another big bummer that I didn’t catch in this video is that the Platten is not very great as it stands you’ll probably want to modify that as well. You can check out my page for some of the other modifications I’ve done to mine….. there’s also been a lot of issues with the machine With overheating I have not experienced that until last week so it lasted about three months before mine started to have the issue. I just have to turn it off and let it cool down. Hopefully the machines on back order will have whatever bug that is fixed. Thanks for watching.
@opa_plays_mw53187 ай бұрын
@@TheOGfrenchy heard about the overheat - doubt that's a quick fix. They do label it as "Not for commercial use" I'll check out your channel under my other channel (chuckRit) opa plays is my game channel :)
@btrswt359 ай бұрын
We use to have a grizzly in muncy pa. Up until the powers to be decided to close it! Miss the store cause shipping costs on their products is kind of a no go for me.
@TheOGfrenchy9 ай бұрын
Yes, paying shipping nowadays does stink! Thx for watching!!!! 🤙
@AllenGoodman9 ай бұрын
Thanks for the info ! 👍
@TheOGfrenchy9 ай бұрын
No problem! Thx for watching!
@burgknife7589 ай бұрын
Just snagged one very excited 😁
@TheOGfrenchy9 ай бұрын
It is exciting!!!! I’ve had it for a week or so and I absolutely love it!!!!!
@knifeknerdreviews46099 ай бұрын
Also wanted to point out there was no need to cut the lever off, those things are designed to be adjusted to any angle... You just unscrew the little screw in the end of it and spin the lever to whatever orientation you need and put the screw back in, they have a little spring behind them. I'm definitely getting a glass platen for it asap and then the workrest will be the next project because it's too small and not flat.
@TheOGfrenchy9 ай бұрын
You are correct about the adjustment handles! Another thing I noticed after I put the video out is the flat platen is wider than the belts, making it difficult to hang the belt off of one side of the platen. I think your spot on about the Platen and the Work rest!
@garrettswoodworx18739 ай бұрын
Actually there's no need to unscrew: just pull the knob out against the spring and you release it from the shaft. Spin it to the orientation you want and let it snap back in place & you're set.
@knifeknerdreviews46099 ай бұрын
@@garrettswoodworx1873 Lol that's awesome, I didnt even notice that, so that's what the spring is for... Kinda a derp moment...
@garrettswoodworx18739 ай бұрын
@@knifeknerdreviews4609 LOL! No worries! I only knew about it because I've dealt with it on other machinery and one of the pieces actually noted that feature in the setup instructions.
@cryptid_legend75679 ай бұрын
Has the motor burned up yet? 12 people in my group including me had them burn up within the first hour. Those are just the ones that have actually used it. The speed controls are getting very hot too. Good luck.
@TheOGfrenchy9 ай бұрын
No not yet …. I am a hobbyist knife maker, and I have only made a few knives on it. I will say that I did have it running for a couple hours the first day and haven’t had any problems but for $300 I would imagine that there’s bound to be some failures. Thanks for watching.
@TheOGfrenchy9 ай бұрын
Also, grizzly should have a one year warranty on this machine so if you’re using it every day all day try to burn it up in the first year they’ll give you a new one
@cryptid_legend75679 ай бұрын
@@TheOGfrenchy we all had it happen within an hour. 14 people now to be exact. All during light profiling. That's just the ones I know of. I was hoping it would bridge the gap but after talking with people who've built an understanding and their own grinder, my hopes aren't high for the replacement.
@TheOGfrenchy9 ай бұрын
@@cryptid_legend7567 ya that sucks man!!! Sorry to hear that!!! From the little bit of knowledge and research that I’ve done it definitely is a priority to keep the motor and VFD isolated from particles and cool to avoid overheating. I’m definitely no expert though and I hope mine will last at least a little while! Thanks for sharing your experience!
@cryptid_legend75679 ай бұрын
@@TheOGfrenchy i did everything mentioned as well. Idk if others did but I was treating the thing better than any tool in my shop lol. My little gf 1×30 is caked with steel power that hardened like concrete after water sanding that baby runs like a dream after over a year of heavy every day use. Best $50 I've ever spent on a tool tbh. That was before I got a collection system though. I hope that these faulty motors are isolated incidents and handled properly. It'd be a shame to see such a wonderful company ruined over something like this.
@jamesbarisitz47949 ай бұрын
You can push and pull your table slide locking lever like a ratchet. 👌
@TheOGfrenchy9 ай бұрын
Gracias amigo!!!
@nathanielpulling9 ай бұрын
How easy is belt change on it?
@TheOGfrenchy9 ай бұрын
Actually it’s really fast and easy… especially after taking off the little guards that cover the two small wheels on the platen! Thx for watching!!!
@larrylind57219 ай бұрын
Just saw your review on this belt grinder. I think you covered it very well. Just curious, does the grinder move or walk at all when you are using it or when you turn it on? I noticed that it has rubber feet on it. Or it looked like rubber feet.
@TheOGfrenchy9 ай бұрын
Appreciate you watching and yes you are correct. It does have rubber feet on the bottom. I had this grinder on some plywood and it was definitely solid during operation. Also, if you were worried about it moving, you could take the rubber feet off and bolt it down to your working surface! Hope that helps!
@larrylind57219 ай бұрын
That’s exactly what I was thinking. Thanks for replying back, I appreciate it!
@TheOGfrenchy9 ай бұрын
@@larrylind5721 hey you got it ! glad to help!
@thechumpsbeendumped.77979 ай бұрын
This looks like a great intermediate machine. Excellent review with a couple of caveats; 1. I wish you’d mentioned the price. $327.95 2. Include a link to the product. It’s not on sale in my country so a search required the exact product code that wasn’t mentioned until 3/4 way through the vid. 3. You didn't need to cut the lever, they're spring loaded and you can pull them out to disengage them the rotate and push back in. 4. Please! For the love of dogs, don’t end every point with an increasingly loud and annoying sniff. You didn’t start until I was invested in the video (3:20) and if it had started from the beginning I’d have clicked to another video. If they did a 220-240v version for Europe I would be seriously tempted to put one on my shopping list and book a flight to the US😂 Subscribed.
@TheOGfrenchy9 ай бұрын
Very thorough comment! Sorry for the loud and annoying sniffs! Lmao! 😂
@jayztools40389 ай бұрын
this looks like the best grinder for the best price.
@TheOGfrenchy9 ай бұрын
It is definitely unique, no other grinders that have this many features for this price!!! Thanks so much for watching!!!
@antichristxpher32794 ай бұрын
How do plunge lines work out with that platen being wider than the belt
@TheOGfrenchy4 ай бұрын
Not very good I had to modify the platen Shortening the width and a month after I did that I tapped and drilled holes for a steel plate to use as the platen which was in my opinion a must if you’re going to be using the machine for multiple knives!
@antichristxpher32794 ай бұрын
@@TheOGfrenchy I hate looking around so much. I’ve been finding a machine I like the look of and then turns out platen is wider than belt. I have a 1x30 or something and am trying to find an upgrade that’s affordable smh idk how I feel about modifying something
@TheOGfrenchy4 ай бұрын
Yeah, I can understand where you’re coming from. It really will be difficult to find some thing decent at that price point ready to go out of the box. I really do think this machine is one of the only options that gets you close to being decent for a reasonable price and as far as modification goes, don’t be scared to try out a few things like the platen and taking off the wheel guards and easy things like that that will make the machine much more user-friendly. I am not a machinist and don’t have a mill so my modifications are pretty basic cutting drilling and tapping holes, a little bit of welding is about as far as I would go. If you have specific questions on a specific modification, let me know. I can help walk you through it if you want. Good luck.
@Duckrabbit_Forging9 ай бұрын
I will be ordering mine as soon as i can afford it. Also, does it go backwards?
@TheOGfrenchy9 ай бұрын
Awesome man I think it will help out tremendously! And no it doesn’t go backwards
@comancherocha70139 ай бұрын
Thats pretty sick and its affordable
@TheOGfrenchy9 ай бұрын
Sickening!!! Thx for watching!!! 🤙
@antichristxpher32794 ай бұрын
Does the work rest tighten so it won’t move 😭
@TheOGfrenchy4 ай бұрын
It does if you crank them down really tight at least for a while. I’ve had mine for five months or so and it’s still Titans down pretty good eventually I could see them stripping out. Check out the Robinson foundry channel he just put out a video where he modified and upgraded a ton of stuff to his machine. Pretty cool video. Thanks for watching.
@stevenk19659 ай бұрын
Great review. Have you tried any slack belt grinding for a convex edge
@TheOGfrenchy9 ай бұрын
Thank you I appreciate that! No I haven’t Tried that out yet but this machine would be easy to set that up! I’ll have to give it a go!!!! Thanks for watching!
@capolot9 ай бұрын
This is an absolute game changer. I don’t even make knives and I’m thinking about picking one up. If they made a radius platen to thin knives with that would be awesome.
@TheOGfrenchy9 ай бұрын
Agreed! Thanks for watching!
@quebird31089 ай бұрын
What is causing the knocking noise??
@TheOGfrenchy9 ай бұрын
It has a bit of a small vibration to it, but my table. It’s thin and hollow when I ran, the machine lifted off of the table, the knocking the sound went away! Thx for watching!
@HumbertoOvalle-jy9bi8 ай бұрын
For safety purposes remove the propane tank to many sparks
@popwall42978 ай бұрын
I looked at these and honestly the Machining on them doesn't really look all that great I think they could have did a little bit better job I think you said the price was $300 around that and it's a little bit pricey
@TheOGfrenchy8 ай бұрын
I would have to agree with you grizzly could have put a bit more effort into quality but I’m sure that would have raised the price even more… and unless you’re a full-time knife maker or have a lot of money to burn I don’t see the hobbyist knife maker buying anything more expensive than this for their first belt grinder! Thanks for the input! Appreciate you watching!!!
@polisheverything19707 ай бұрын
Of all the cool things that you say come with it are 2 omissions, first a decent enough motor (a 3/4 hp motor isn't 3 times more powerful than a 1/3 hp motor) that doesn't bog down under pressure and cambered drive and tracking wheels. For a belt this size you need at least 1 hp preferably 1.5 hp, these are some of the main reasons why people who were excited about getting one of these have returned them or made the relevant alterations. This is what you get for Chinese made junk that has just had an American brand label stuck on it.
@TheOGfrenchy7 ай бұрын
Everybody’s entitled to an opinion I agree things could be made better on it, but then it would cost more money. The whole point is that it is a good price for a decent machine for someone who is getting in to knife making. Appreciate you watching
@richardbranton1909 ай бұрын
I wish this came out last year it would have saved me some money. I purchased the 2×48 Ameribrade and I absolutely hate it. It's not near worth $1300 so don't waste your money I can tell that one is much better
@TheOGfrenchy9 ай бұрын
Geez sorry to hear that I thought Ameribrade was a good one? Maybe you could sell it and try to get a good amount of your money back? Anyway thx for watching
@richardbranton1909 ай бұрын
@@TheOGfrenchy they make the best 2×72 on the planet but they sure missed it with the 2×48
@jackladouceur91939 ай бұрын
Shoooo weeeee
@TheOGfrenchy9 ай бұрын
Sha Bangers!!! Little bro!!! 😎
@RVsbladesnthangs8 ай бұрын
OK, I'LL SUBSCRIBE
@jasonvliet-odonataknifeworks9 ай бұрын
Good review! Definitely a huge upgrade over the 1x30. Not sure if I’m happy or sad that it wasn’t available when I spent north of 6k on all things Ameribrade (which I do love), but I probably would have bought this and my wife would have said “don’t you already have a grinder” if I decided to upgrade to a 2x72. Good luck with it! Hope it works out great for you. I gave you a sub…you’ve been on the TRE chat before, correct?
@TheOGfrenchy9 ай бұрын
Hey, first off really appreciate you watching and for the subscribe! And it sounds like we have similar wives lol! And yes, I have been on Ericks lives before he is probably the sole reason why I started doing KZbin. He seems like a really good guy and someone to learn a lot from! I recognize your name from those lives! Hopefully will see you around! Thanks again brother!
Here’s a link to another quick video I did let me know what other links I can help you with. Thanks for watching the video!!!!
@incorrigiblerogue11939 ай бұрын
When one of these bigger companies develops an inexpensive 2x72 they are gonna run an the small guys out of business. I can't believe they haven't done it already
@TheOGfrenchy9 ай бұрын
Right!!!
@mohammadyounus51389 ай бұрын
How big is the motor ?? SIR GEE 🙏❤️
@TheOGfrenchy9 ай бұрын
The motor is 3/4 horsepower. Thanks for watching!
@mohammadyounus51389 ай бұрын
@@TheOGfrenchy is that possible that , that the Motor could be replaced big a bigger motor to 1.5 HP the chases can hendel it ??? Please 🙏
@TheOGfrenchy9 ай бұрын
@@mohammadyounus5138 I believe it is possible I guess, depending upon the size of the motor would determine how much modification you would need to make to the frame! Def worth investigating although I will say I am impressed with the speed and power of the stock motor
@jmbstudio68738 ай бұрын
The platen is too thin and wide. The motor is underpowered. It seems none of the rollers are raised in the center and they are all flat. Raised rollers keep the belt aligned. It is a nice toy, but a commercial grinder it is not. I bought a Beaumont several years ago and have not looked back since. People cry that they are expensive, but you can finance anything these days with payments. Dont get me wrong, I like Grizzly alot as I have a mill and lathe from them that are the bees knees. Forge On!!!
@TheOGfrenchy8 ай бұрын
Yes I couldn’t agree more!!! This is definitely a good choice for a first belt grinder to get into the hobby or for the occasional knife maker! Hopefully one day if I continue the hobby I’ll upgrade to a professional one!!! Thanks for watching and sharing!!!
@TobaccoTooling9 ай бұрын
That thing has a 3/4 horse motor… that’s not gonna be very useful for actual grinding. Upgrade that to a 1-2hp
@bobdriggers61119 ай бұрын
Popane tank
@kermitfrog18979 ай бұрын
Why is it so noisy?
@TheOGfrenchy9 ай бұрын
It’s really only loud when you have it turned way up otherwise, in person, it’s not that bad! Thanks for watching!! 🤙
@nathangonzalez76919 ай бұрын
I think if they put a 1hp motor with a 2x48 belt size they would have killed the market.
@TheOGfrenchy9 ай бұрын
😂 true dat! 🤙
@Fireworxs20129 ай бұрын
*How can you do a review of a product you've never even used? Get back to Us after you've made a few hundred blades on it... Grizzley's Motors are notoriously sketchy. (cheap chineesum windings & armatures)...Plus their small part castings are famously garbage....I also don't see how you're going to do a decent plunge cut on that cheap platen.....I've had my Burr King 542 for at least 25 years. Made thousands of knives on it. I installed a speed controller forever ago, for about $50..(1800 - 3500 SFPM)..It has an oversized custom built tool rest and a hardened steel platen... I whole heartedly recommend it to anyone who wants to get serious about Belt Grinders...For the record, that "Knife Making Shop" is too freaking clean* 🔥
@TheOGfrenchy9 ай бұрын
I honestly appreciate your harsh and honest comment. I think the whole point of the video was to showcase the grinder knowing that it is incredibly cheap. Thus cheaply made in comparison to your Bur king 5000… your certainly right about the platen and there are other aspects of this grinder that were not well thought through! Appreciate you watching and sharing your thoughts.
@Fireworxs20129 ай бұрын
@@TheOGfrenchy*My apology if I came across as "harsh". I'm old and with every year that passes, my tolerance for ridiculous BS decreases...Unfortunately, Youboob seems to have become a haven for Posers and BS Artists...I'm not saying that's you, specifically, but the entire context of this "review" is suspect. My initial comment still stands. How can you do a product review of something you have obviously never used or tested? Who knows? Maybe it is a good machine. Maybe it's good for woodwork but sucks for metal work?..Maybe it's going to catch fire and burn your chip board knife making shop to the ground?..Who knows? Point is, you can't know until you plug it in and make some messes with it.. I would shocked, if that Grizzly Motor actually produced the advertised HP. BTW, you will never see a 2x72" version of this thing because it would require a significant increase in HP & torque to make it a viable machine. Direct Drive for this set up is a huge tip off that you're buying junk. The good stuff, the real stuff, the WORK stuff. is almost always belt & pully driven, OR, it will have a HUGE overpowered EXPENSIVE motor on it...For the $$ invested, you would have been better off with a 1x42 Delta or something similar. 1x42 belts are cheaper, run cooler, are easier to find and cut better...They also require less power and torque to cut...Good luck in your Knife Making Endeavors...You're gonna need it*
@ericerf68379 ай бұрын
Seriously- try to understand the intent of the machine and the intent of the common user of this machine. This was an excellent review of a new machine that just came out and many of us appreciate knowing what this reviewer has found out in a short time frame. Totally unnecessary harshness. You should check yourself.
@Fireworxs20129 ай бұрын
@@ericerf6837 *Seriously "Airlick"* 🖕
@TheOGfrenchy9 ай бұрын
@@ericerf6837 appreciate your kind words and checking out the video!!!
@hrxy14 ай бұрын
toooooooo much sniffing
@TheOGfrenchy4 ай бұрын
lol yay it was cold out…. Thanks for sharing your thoughts
@Mhunt6687 ай бұрын
It's a pull handle you don't have to cut it. Pull it out and turn it back to tighten.