NEW Hobbywing Quicrun Mini24 Brushless ESC & Motor combo! SCX24 Installation, Run & Review

[@CapeCrawlers]

Timestamps ESC overview: 1:00 Motor overview: 3:01 Installation notes: 4:53 Calibration: 5:39 First runs: 7:16 On the rocks: 9:52 Final thoughts: 15:10

[@jbsir1]

When is snows, you should do more videos crawling on some packable snow! That'd be pretty cool

[@ControlAroundRockLines]

Very nearly ordered this but the fact it doesn't come with a pinion gear & is tricky to find a pinion gear to fit the scx24. Killed it for me. Ordered the mb100 & purple injora motor instead

[@Danielxperez14]

I have the Injora brushless kit and can say the esc is trash, I wanted this one too but I need to find some brass pinions first, I’d rather get a furitek setup for another 30$ with Bluetooth tuning

[@small.and.even.smaller]

Competition is good. More companies are doing good things now. The combination of ESC and motor works very well 👍

[@JerrMin]

I’m happy to see you review it. I got mine a couple weeks ago. I looked forever for a pinion gear. I asked around to some people that’s in the hobby. They said Kenonhobby they have motor mount and gears. Comes with: 1 x Machine Cut Alloy Spur Gear 64P 41T 1 x Machine Cut Delrin 64P 10T 1 x Machine Cut Delrin 64P 11T 1 x Machine Cut Delrin 64P 12T

[@HudsonPalfy]

Mini Komodo pinion should fit homie

[@JerrMin]

@@HudsonPalfy but is it 2mm bore? I’ve already got the stuff I mentioned on the way

[@HudsonPalfy]

@@JerrMin I measured the shaft of the mini Komodo and it was right around 2mm which is the same as the hobby wing. I’m talking about the mini Komodo not the micro Komodo

[@PeteQuad]

Mofo RC for all the pinion gears

[@FabioOliveira-fj5lk]

It's ridiculous for HW to build an engine and not provide solutions for it. because of a pinion I don't have RC to walk

[@danielmoriarty751]

I love their systems been running it in my mini 24th scale drifter for over a year now absolutely love it. Glad to see they’re finally coming out with some thing for the crawlers.

[@wivlle]

Adam, my friend, I want to thank you for tossing it into the SCX24 platform. I received my MINI24 the other day; unfortunately, I have to wait for the new Lexus GX470 to arrive. This video is going to be on repeat, until then😂🤣😂 Additionally, I love that it requires the $10 Hobbywing Program card vs. the Furitek app; this is a good thing because, if you are crawling where there is no cell service, you can still make ESC adjustments😎 Also, you aren’t paying the extra money for the Furitek app’s server maintenance, etc. P.S.A: MOFO RC offers a $10 steel 2mm shaft mod.3 13t press on pinion for SCX24. He also sells an aluminum 9mm (forward facing) motor mount for SCX24, it’s $20. (The 9mm motor mount Will fit up to a 14t mod.3 or 8t mod.5 pinion gear.) ☮️and❤ Bobby Lee Fort Collins, CO

[@Jun_GL]

I was tired of waiting for an answer about motor mounts from Hobbywing to finish my first 1/24 build, so I ended up buying a Fat Viper combo from Injora, at the same price range everything is included, steel pinion and motor mount. I've been using it for 2 weeks now, probably 20 lipos, and I like it a lot.

[@Danielxperez14]

So your using the Injora motor with this esc and it’s good? I also have fat viper but not a fan of my Injora brushless esc

[@GhostLineRC]

@@Danielxperez14 (using my RC account to answer) I run the Fat Viper motor with the Injora MBL32 esc with 2s batteries and I'm very pleased by this combo, there's some videos of it on my channel. Sorry I have not tried the Hobbywing esc so I can't tell if you can use it with a Fat Viper motor. Can I ask what you dislike about the Injora esc ?

[@Danielxperez14]

@ my issue is the esc turns off and resets when I turn all the way with my dual rate at 80 percent and I set the endpoints

[@Rc_impulse]

All said and done, we’ve brushless in drones for over a decade and with open source Esc software things should be way way cheaper and easier for us poor folks who don’t get jack for free! Hype train king!

[@MultiEasybutton]

Yep24 just did a vid on a 10$ esc solution, been running similar setups for years

[@Danielxperez14]

@@MultiEasybuttonyea the 10$ esc uses the same software as the Injora brushless esc which I think is trash for the money

[@anthonyrichards4083]

​@@Danielxperez14what esc ?

[@trejodaniel]

I still have not opened mine, and by watching your video I realized it brings that horrible tiny battery plug. I wish it brought a JST plug. Oh well, I guess I'll have to cut it up and solder a new battery plug. Thanks for the video review. Great information as always.

[@wilcapoeira]

Hi! I see almost all your videos and hardly ever comment, but just Today I have configured all the parameters of my dasmikro esc just with the button. Turn on your esc with the button pressed for 10-15 seconds and it starts to cycle the options. Don’t release it, once you here the amount of beeps you want (5 for instance) you release it. Now you can press and cycle through the options for row 5. Something like that, look it up! You may do a lot of config but for someone having just one configurable ESC that will hardly ever configure again it is some saving hehe

[@martinh2075]

Great to see the brushless kits of 24th scale. However after running the furitek this summer. I found that you have to blow out the out runners because sand and grit gets inside them very easy. I'm looking for I runner motors like the cedar from furitek. Water resistant and dust proof. I use my rigs outside so they get dusty and dirty. The out runners I feel like are more for indoor use. I also don't like that you have to keep wires and everything clear because they rotate. I hope hobby wing and injora make an Inrunner option for the micros.

[@Gibsonlife573]

I run nothing but outside I might clean my Motors out every 6 months and then put a couple drops at 3 and 1 oil on them but I run all mofo Motors right now and I've never had a problem also my ESC is big kid tiny trucks

[@martinh2075]

@@Gibsonlife573 I would think adding oil to it would attract even more dirt and sand and make it stick and harder to clean.

[@RCfanAddict]

Make sure whoever purchases this make sure you pick up the original $10 program card! This combo fits perfectly on trx4m with injora 11t or furitek 11t pinion with set screw

[@James-bristol]

Bit of a let down ,that it don’t just fit the scx24 platform time you add the other bits you need to get to fit it’s quite a costly setup

[@snörre23]

Plus you need experience and tools to press on a pinion.

[@melmskilemz6307]

It's not ment for a specific vehicle

[@patrickpaul4901]

@@melmskilemz6307it’s for the trx4m. Have an email from Hobbywing stating it. It’s direct drop in for that truck. They never tried the motor in An scx24, only the esc as a brushed setup. But they sell it and advertise it as drop in, or at least did. Haven’t checked to see if they changed their advertisement

[@Danielxperez14]

@@snörre23you can use a mini Komodo 16t pinion that comes with a set screw so you don’t have to press it on

[@shawnrichardson118]

I’m a huge fan of hobbywing I’m excited for this product can’t wait to get one🤘✌️

[@MitchellBolognaniRC]

I definitely need a Capecrawlers hat!

[@CapeCrawlers]

Still working on the design. Not quite happy with the logo on the hat. Getting there though!

[@XtrmTJ97]

Hat? When and where please?

[@kendotek9414]

Hobbywing is about to take Furitek's lunch! I run a Furitek Cedar with Lizard Pro in my SCX24. I've been wanting to put brushless into my Ascent18. Given the friendlier pricing, I'm gonna have to give the Hobbywing combo a try.

[@ax94kP1z]

Love the videos! Would you ever consider doing a video comparing all the SCX24 models? I’d love to get your thoughts on which current model is the most capable

[@exlewisrc3674]

I look forward to seeing this setup!

[@Rocklandingoffroad]

So let me just say the pinion from the factory ascent18 motor works and you do not need a spacer plate. It bolts right up to the ascent 18. Hope this helps someone

[@yotday]

Competitions good, yet no one is really challenging Furitek since no one does configuration through an app. I'd try more ESC's if they offered that as well

[@shockman8014]

Maybe a little cheaper than a Furitek stinger combo after the mount, pinion and card but i'm not sure. And it might be as good. I have no issue with my Stinger setups though. The Furitek motors and ESCs I have (6 of each) has never failed and they just fall into place as is. Same with the 1/10 fusions (4) though. I use the old type lizard pros which are smaller than the newer ones and can still be had. Between the app and the radio settings I have all the settings I need. If furitek ever fails me I would gladly buy another one. I don't do 1/24 anymore but I might get one of these for one of my 1/18s.

[@michi125125]

the Injora fat viper combo looks the best for the buck right now.

[@CapeCrawlers]

That is such a great setup.

[@snörre23]

When i buy pinion gear and motor mount from furitek and a programm card its 150 (international shipment, customs fees) - a ready to install package i would have tried. Like that i stay with my furitek stuff.

[@shockman8014]

I think that's a no brainer too.

[@snörre23]

@@shockman8014 Also i think less experienced people will have trouble finding those parts, mounting a pinion without ruining anything, i wonder how many they get returned when people realize that there is no pinion and motor mount for SCX24 included.

[@shockman8014]

@@snörre23 Right. I have seen while shopping for parts on Amazon that some very good systems and parts are flagged as "frequently return item". This, if sold on Amazon is destined for that flagging. But it has no reviews, good or bad there yet.

[@RCCrawlerz209]

Injora has come out with some interesting axles for the 24s. Think about trying them out, soon?

[@HudsonPalfy]

I do believe the mini Komodo pinion will fit

[@JeepinMaxx]

Thanks for the review! I wonder if I can use my program card from my Hobbywing Quicrun?

[@jasonbecker4997]

The cards are all the same. Some of the options are different than what the label on the box says. The options for each setup is included in the instructions. Just ignore what the box says.

[@김피식-k9n]

I'm curious about Injora's new axles for the SCX24. ☺️☺️

[@midnightwolf7417]

I also have another question what’s the most common blot size on the scx24

[@diegoacosta8114]

What receiver do you run with this setup?

[@Jakesnyderinthedirtyfivethirty]

Do you know if the motor mount and pinion that come with the injora brushless motor would work for the hobbywing ?

[@cyba888]

Will this fit the Meus MB24 chassis?

[@christianrambissoon1141]

I think all these mini crawler systems are great but I HATE that you need a mount and to flip the skid ant to cut the esc trays and get a pinion...I wish someone would make a true drop in system

[@shockman8014]

Besides Furitek?

[@Gibsonlife573]

Did you feel the motor to see if it warmed up

[@19961djs]

Does the motor mount to the stock mount?

[@K2KRAWLERS]

What would be your go to motor/esc in v2 gladiator? I am thinking of making the jump to the furitek venom combo and purchasing a remote for better trigger feedback but for that $$$ I could buy a whole new truck for my son! Torn lately but would love to hear what you think!

[@DoubleADay]

First off, don't discard the v2 esc if you go brushless. I personally use a flysky gt5 transmitter with my brushless set-ups. If you want better control but want to stay brushed, check out Mofo Rc's Torque beast 050 motor. It is plug and play with your gladiator

[@MaximumRC_]

Hello- what are you using for rx/tx combo?

[@furysport67]

How can this be mounted if you don't own the furitek transmission?

[@NatesRCclips]

What about fms models 🤔

[@RCRitterFPV]

Enough umph for the TRX-4MT?

[@SKIJP1]

Did you have any trouble with the drag brake? I installed it in the ascent 18 and the drag brake does not hold.

[@CapeCrawlers]

None on the scx24. Granted it’s much lighter

[@crashandcynder]

Why not put it in the basecamp or the lexus?

[@IRULEHYRULE-2001]

Looks like a good little system. Would the esc work with the mofo rop?

[@DoubleADay]

Yes

[@moralesmike]

Can you confirm if this would bolt up to the FCX24M? Says it is compatible but does not give the bolt patterns.

[@Rc_Moose]

Hey cape crawlers did you know that injora made an aluminum lcg chassis for the Trx4m and the high trail

[@CapeCrawlers]

Yes! Got one on the way

[@Rc_Moose]

@@CapeCrawlers I am going to buy it

[@ricgruber9185]

What rx are you using

[@bensonroubinet4319]

How does it compare to the injora viper combo

[@CapeCrawlers]

Very similar but much easier to program

[@bensonroubinet4319]

@@CapeCrawlers I’m sorry witch one is easier to program. What would you recommend

[@toddlloyd9161]

Great video. Are you going to do a build of the Fx118 Katana?

[@CapeCrawlers]

Oh man, I don’t know what else I would do to it. I have wheels and tires and some brass up front and it works great!

[@toddlloyd9161]

Thank you for your answer . Do you have suggestions on a first 1/24 scale crawler new to this part of the hobby ?

[@shockman8014]

@@toddlloyd9161 I would suggest a Furitek Cayman or cheaper an Axial Gladiator. The Cayman will need more parts and the RTR Gladiator will need a lot of parts replaced (almost all). For a hobbyist that is. Otherwise buy what has a body you like.

[@Gibsonlife573]

Have you tried big kids tiny trucks escaped 32

[@anshpatel915]

Does it fit in trx4m or redcat ascent18

[@shockman8014]

That's obviously what these are for.

[@midnightwolf7417]

Does anyone else have a problem with the scx24 where with the alen wrench and stock bolts the bolts strip?

[@adam-izer6385]

I did but I noticed the wrench was stripping also. I invested in a set of good wrenches with hexes and nut drivers and they have been amazing.

[@NatesRCclips]

I agree without him a good rench got rid of all my stripping problems

[@FreelancerSD79]

I have a good wrench set and I can’t get 2 of 4 to tighten after installing rock sliders on my scx24 Gladiator, I’ll probably use a bit of super glue if they fall out. 4 of 4 tightened no problem on my JLU. I snugged them up, but for some reason those two just spin.

[@midnightwolf7417]

So by the sounds I should get a good wrench

[@thatoneguyyouthought]

109.99 in canada. Our market sucks so bad

[@rcplaytime]

very cool 😎😎👍👍😃

[@crocsonletsgo9665]

Seems too slow. wonder if they will come out with a beefier motor soon like they did with the 2300 on the 1/10's.

[@ricgruber9185]

Axial is using 2in 1esc ,rx

[@grassrootztakulusroq8011]

Can someone please....NICELY....explain to me FOC and it's affects? Sorry for my ignorance.

[@fyego]

The FOC system allows you to put the throttle at 5% and the motor will not stop for anything, it will maintain the same rpm with any obstacle. With a traditional brushed combo, if you have any obstacle in the road you need to put more throttle to pass.

[@shockman8014]

@@fyego "more throttle to pass". Like real driving?

[@fyego]

@@shockman8014 Exactly. Just like the combustion engine, on an uphill slope you need more "pedal" to go up. With FOC this is not necessary. You can set the transmitter to 1% of the throttle and nothing will stop the car.

[@shockman8014]

@@fyego I understand that. What I don't understand why some think that's so much better than more realistic throttle control.

[@fyego]

@@shockman8014 In my opinion I do not consider FOC better than a good brushed combo (it is in terms of efficiency and instant response). I prefer the brushed touch of my Holmes Crawlmaster 550 13T + HW1080 because it feels like a slow old diesel engine with tons of torque.

[@creekcreeperrc7972]

Thats the smallest hobbywing combo box I have ever seen lmao 😂

[@Friskee62]

too noisy...

[@Gibsonlife573]

D m e u s makes an amazing opinion press and Fuller