New Holland T7060 Slemish Tractors Mechanic Interview - Neil The Mechanic

[@oneillagrivideos]

The 190 needs to be part of the grassmen fleet

[@mr_baksteen_hd2588]

i love these older series new holland with the rang command gearboxes, we have one at the farm i work and it never let us down!

[@collinzappa1519]

Oh boy I can see Jimmy Doc coming to have a wee look at this yoke!

[@Tjgriffin060]

Wheres the 3690 at we've only seen sneak peaks?? Can't wait

[@mucksavageIrl]

That mechanic is a bit of a wizard.

[@bekabeka71]

How

[@patrickconcannon6006]

Been waiting for this

[@Mr_WRD]

Love the sound of this tractor 👌

[@Jorge-mm6ym]

Our McCormick’s have the same Iveco engine that these girls have, the purr off them is out of this world!

[@eltonmontgomery7425]

The blue won is going to be a good addition to the team. I am looking forward to see the videos on the 3690

[@SimonKL11]

That's a nice tractor👍👍 Great job👍😉

[@starkeythemadclimber]

Need to get a superglide cab suspension kit on that! Massive improvement over the stock dampers

[@michaelDaudi-d9q]

I have one question about PWM VALVE PROBLEM to the new Holland T7060 is give us some head pain because is the problem is cose some gears not work well

[@VelEire_]

I’d love one, RC, Russell’s spool kit, Sort the 50k bearing freshen it up & map it to 300🤣

[@RedShedProjectsScotland]

Think this one needs to be called Big Bill!! because thats what is coming 😱 proper job though lads! brilliant video.

[@andrewwoodhead8305]

Very posh!!👍👋

[@Michaelsmith98453]

Some t7 and 190 there ye got there

[@Eavis_excavations]

Great one can’t wait had the same issues with mine practically the same hrs and problems but mine is pushing out 273hp on the shaft look forward to future video 👍🏻

[@princekwamemensah1178]

Pls i have a similar machine,.,.but canbi use a manual gearbox to drive it

[@Doyle7810.]

Two grassmen videos in under an hour?? It must be my birthday 😂

[@stewarth8650]

Great video!

[@brianmullins5824]

Love to know the cost of all them parts and all the labour,

[@Grassmen]

I cant answer that question it was bought with a complete "go through". The only way you would know this answer would be to ask Slemish Tractors themselves.

[@oneillagrivideos]

Next you Need Jimmy doc up in her

[@jamieshields9521]

I have admitted I would not choose NH T7 series I am not fan of cab interior, nor the problems but at least Grassmen have put effort of full TLC of T7, I know few farmers they drive their T7 into ground, one of them burnt to ground, ps check cab roof aircon I believe. As a tractor fan can’t wait see final restoration of T7, maybe nice weight/toolbox would go nice on front hitch👍

[@zzirSnipzz1]

Those T7's are even better than the T7000 series

[@garymadden2656]

A brand new tractor would of been cheaper wouldn’t want to see the bill but wish you good luck 👍

[@uni.1666]

Could you give is an idea on how much all that work cost plus tyres etc to get her to the end result.

[@tobymoore2308]

Electric spools are enough to make your cry on times 🤦‍♂️

[@johnmccready-pc3br]

Grassmen does the bigger range command and power command tractors have bigger clutch packs or are they all the same size no matter the power? @GRASSMEN

[@Grassmen]

Range command tops out at at SWB Ie 6080, T7210 kinda thing. Then if im right the smaller tractors power command is smaller than in the likes of the LWB. And I think the clutch packs are heavier in the 7060 v 7050 and lesser models!

[@stephenross1581]

Could you give us an idea of cost to get this work carried out ?, this guy knows his stuff inside out 👍🏻👍🏻👍🏻

[@lukepalmer2126]

I reckon it would be over 12 grand

[@bekabeka71]

@@lukepalmer2126fuck that 😂 piece of junk, id rather buy German or Russian beasts 🚜

[@mataiterapreha]

Got one with 10k hours on and I can safely say we have done all the same work to it plus the 50k gear spline stripped. Puts out 240hp at the shaft

[@Grassmen]

It's more preventative. I think it looked worse than it actually was to be fair bb

[@gerryoconnor3414]

Great video, ill always call them Ford's

[@zzirSnipzz1]

Very little left of ford sadly mainly went down the Fiat line, understandable Fiat bought 80% of Ford newholland

[@Agri-Farm-UK]

T7060 brilliant tractor 8 thousand and counting

[@888smc]

Is there much risk involved with re-mapping a tractor?

[@paulhughes4081]

Best man in N.I to give good treatment to a 7610 series 3???

[@Modlendingen]

Nice tractor, no doubt about it :) But I do like the TM190 as well :)

[@zedelgem]

tm190 junk

[@MagnumCamNZ]

That would put a horn on a jelly fish! Hope 710s or 800s on rear of her? Just need some stonking air horns hidden under bonnet and full tang mode! Cheers n beer's from New Zealand guy's 👍👍🍻🍻👨‍🔧👨‍🔧🚜🚜🚜🇳🇿

[@kmcca08]

Great video. Some money spent on her.

[@wizard_of_poz4413]

Interesting I never knew front ptos were mechanical

[@seanking9325]

How much money were the LED lights

[@ianhaggart1438]

So a new tractor now then😬😉👍. Good vid. Tm190 for me ta👍 stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@mcfallagri4572]

They call that old school

[@ethanearle9457]

Where did use get the replica straight pipe we have a 7040 and want her to sound the same but want her looking original don’t like the look of just a straight pipe

[@obfarming6224]

Get jimmy back on her

[@jakeluff8067]

One of the best series new Holland have done. Far better than the T's. What's happening with the old fastrac?

[@Caboosz]

Now. where is jimmie doc at? need to get him pulling a few loads whit this girl :D

[@olliehegarty504]

Did e buy the 7060 new Holland.

[@Tjgriffin060]

They did

[@ChrisReeed]

Suprised they done all that and didn’t even change the decals

[@Grassmen]

New decals are now on

[@seanmcguigan346]

@@Grassmen so Johnny is finished with it? Should be nice now

[@Finn_7050]

@@Grassmen where did you get the 7060 decals from as I am looking for some for my 7050

[@petrokemikal]

2 brutal tractors in there day... Dey would still pull a tree down and have an oul ham sandwich after hi!!!

[@digbyblenkin4348]

190 needs a home

[@briscaf21]

Did you guys ask that the tractor be gone through to such an extent?, I wonder that the cost of having all that done to make it right would put local buyers off and it end up for export I know if I was in the hunt for a good used tractor and what came up needed what this one did I'd be looking else where. I'm qurious to know what the cost of the parts and labour was in the end to make it 100% right.

[@Grassmen]

In short yes we did. We see her as a keeper and the only real problem that was keeping her from working was the front shaft. Everything else was known. She didn't need brakes just yet or the carrier bearing. There were 4 out of the 5 spools working. The rear mudguard and fronts were OK but we have her since painted and have learned over the years tidy her mechanically b4 any paint 😆 🤣 😂

[@ardcost1]

@@Grassmen so ball park what was the cost of the work done after buying it?

[@Grassmen]

@@ardcost1 mechanical work approx 4500.

[@crfarmlife1267]

She’s no 190😡

[@davidbroderick4412]

Hi first

[@Michaelsmith98453]

And?

[@davidbroderick4412]

Idk hustle saying

[@davidbroderick4412]

Just saying

[@nonnnnone6034]

Hr./l. ?

[@buddyLove-bo2lc]

Ud been better buyn a new t7,210 for the same price of the 7060 time the mechanics bill is payed for 🙈

[@matty0674]

Thats what ya call a tractor not like these big new 8s series and r and m series and alk that

[@richardbolton8006]

So really what your saying is that she was a dose she needed more parts than what would build a new tractor, be careful buying things like this

[@Grassmen]

She needed a splice and a front shaft and everything else was pretty much routine maintainence. Perhaps we are he only people who think after 7600 hours shes done not so bad.

[@Sean-if7rp]

She’s been well worked by now, didn’t do too bad