New Hookah/ Snuba Diving Rig

[@janjohannessmith7033]

Great video about American ingenuity and this guy has really nailed it!

[@ancellsadventures]

Thank you so much!

[@williamrickard6388]

Is that just your standard air tool hose or is that a special breathing hose plastic or rubber

[@ancellsadventures]

This is just a standard air hose. Probably should be using one specifically made for breathing air but they are about $300 per hose. And yes can’t put a price on your health, but until I buy a dredge air pump this will do just fine lol

[@brighambaker3381]

You don't need an oil and water separator??

[@ancellsadventures]

No this is an oil free compressor and the air filter I’m using here will separate any water vapor out.

[@eugeneh7207]

What kind of filter are you running off the compressor

[@ancellsadventures]

As far as the filter to my air hose and regulator I’m running a 5 micron air filter made for air compressors. As far as the intake filter off the extension pipe that is a standard air compressor filter used on many air compressors, just a 1/2 pipe thread to connect to the air intake hose

[@eugeneh7207]

@@ancellsadventures Thank you. Great job.

[@ancellsadventures]

@@eugeneh7207 Thank you I’m glad you enjoyed the video!

[@Nu_81]

@@ancellsadventuresHello what Kind of Filter Material do you use? Can you please share a Model no?

[@ancellsadventures]

@@Nu_81 the inlet filter is a paper filter just to keep dust and debris out of the compressor. The outlet filter is a bronze filter used in air compressors. I’ll see if I can find a link to post

[@raychapa2697]

Can you send me the details on where and how to convert. I'll pay you for the step by step how to.

[@ancellsadventures]

Unfortunately I just don’t have the time to go through it step by step. You can also look at Gigmaster on KZbin and he goes over the process in a little more detail than I did in his video. I’ll try to post his video link here

[@ancellsadventures]

kzbin.info/www/bejne/lYicoWita6p3ipY Here is his video I hope this helps!

[@raychapa2697]

I can fix it all up, just need the materials where to buy hose, that micron filter and the adapters thread size ECT...

[@ancellsadventures]

@@raychapa2697 as far as the hose it’s just 5/8”( I believe) bilge pump hose from my local hardware store but any boating store sells it by the foot. As far as the filters look down below in the comments at the first comment and my replies. It has the links that I shared with someone else who had similar questions. The three way air splitter I bought from Walmart in the automotive section. The extension pipe used to hold the air intake was something I made from old camper canopy parts. I hope this helps!

[@raychapa2697]

Thanks.

[@johnq.public2621]

😀👍👏👏👏