🤔NEW JC Aixun T420D Soldering Station VS. JBC Station REVIEW - Google Pixel 4a Logicboard - Dr. Ben

[@RESQREPAIR]

As always, if you have any questions, feel free to ask them in the comments🤝💯 Also, if you enjoy the video, you can support us by giving a thumbs up and subbing🙏😊

[@Fix2fast]

What jbc tip do you use? 23:35

[@sudheerm.s6792]

@@Fix2fast never reply.

[@lord_haven1114]

@@Fix2fasthe says you can ask so his channel gets higher in the algorithm. He won’t answer though

[@Rapid-eraser]

I am currently using Aixun T3a and T3b stations. What I found out is that the tips provided from Aixun have different impedance from the JBC ones. Also I tried a couple of other cloned tips from other vendors and all have deferent values for the same head type tips. Also JBC tips got around 20 - 25C lower than was the target temperature. You can certainly recalibrate your self the station to reflect true temperatures for JBC tips but if you mix match cloned and genuine tips you are in trouble. I also burned a couple of other vendors tips and their response is that their internal resistance is different than JBC and Aixun was over powering their tips and burned them. So there is some room for searching and tweaking from Aixun so that the firmware could compensate for deferment vendor tips

[@M.E63]

That’s true they all different quality and resistance is different, I don’t think any station will allow different calibration for genuine tips and different calibration for no original, what I do is work out the difference so if the non original is average 20c higher or 10% higher than the actual temp then just compensate the temp when you set it but having several brands wouldn’t be great, just stick to one non original brand and the jbc tips

[@mggsmservis7501]

no it is not compatible jbc 115

[@jlev505]

I recently purchased the Aixun T420D with all 3 handles. I purchased this for the use off the 210 and 115 handles to solder SMD ICs. My Pace ADS200 does a great job for larger trace boards like power supplies and audio amplifiers. The tip selection makes it impossible to work on SMD ICs with tight spacing. Hoping I get my new station a few days after Christmas?! Thanks for the review.

[@dungthaihoang8453]

Can u comepair JBC 2 Nase/Nane vs T420D. Thanks

[@catharperfect7036]

Is the t115 handle worth getting if you already use the 210?

[@Shumer95]

Hi, friend! under load on the T420, if the transformer makes a little noise, especially when working with the 210 handle, is this normal?

[@RM-en9gk]

This brand needs to come up with a hot tweezers for this station and it will be the best station for the money

[@RESQREPAIR]

Tweezers is something nobody needs bro.

[@RM-en9gk]

@@RESQREPAIR tweezers have their special use in specific areas. I like using hot tweezers on areas when a bad cap is surrounded by plastic conectors, thats when hot tweezers comes in nicely without melting the plastic connectors with the hot air station.

[@limebulls]

@@RESQREPAIRwhy?

[@Phou1984]

@@RM-en9gkjust use two solder iron. There’s really no need for hot tweezers, it’s better for some people to spend the money on a secondary solder station as backup.

[@thetechgenie7374]

I use to use the tweezers on my JBC nase station use to have and didn't like that station much. I ended up over the years becoming much better at microsoldering and don't even need hot tweezers you can do same with preheater, or hot air station actually way quicker and better with nice regular Precision tweezers. Most boards are muilt layers and love to absorb heat, making hot tweezers that come JBC nase station kind of useless, where heat station remove components and replace components like bad capacitors and filters in seconds. Most hot tweezers are to big for micro soldering and don't have the thermal capacity for most newer iPhones and game console boards as tend to act like your soldering on huge ground planes. Once you learn how to control your heat station well not blowing off components, you will never use the hot tweezers again. Back in the day when use to do backlight repair for iphone 6 and 6s the JBC nase station was my go to but since now I do underfill BGA chip and etc. No longer use the JBC Nase and use the Aixun t420D solder station with genuine JBC tips and literally my favorite station as can use for through hole boards as repair vintage electronics as well to iphone boards and game consoles boards. Way more useful.

[@tokin420nchokin]

Just ordered a T420D with the c210 and c245 handpieces. Im kind of thinking ill pick up a c115 handle for the small stuff. Is anyone using the jbc handles with these? I assume you cant just plug them in and have them work, but that would be great if thats the case

[@amielem]

32:20 some times i use a holder for my air station and direct 300°c to the zone of the tip

[@tomerbenhamo8589]

Hey Which one you perfer?

[@razer192]

Will the JCB micro soldering tweezers work with it

[@brendinemslie8226]

Do real JBC handles work with the base unit?

[@hbmobile3985]

Please microscope name

[@ExzeroX]

Hey ben, I remember a few videos ago you said post some idea's for future videos, Well one problem i come across a lot is face id not working, but in portrait mode in camera the first 3 modes work fine which are (Natural light, studio light, Contour light) but the last 3 modes do not, (Stage light, stage light mono, High key light). When going in to the settings you can click on "set up face id" and it will go in to it, come up with the square and look for your face, but after a short time it fails. Usually i find these are water damaged dot projectors and ear flexes have this issue a lot. I would be interested to see if you get these kind of issues in for repair like i do, Any ways great video, love your work as always!

[@grininventor]

Hey, do someone knows if we can use real JBC handles (not tips, handles) with the T420D station ?

[@chinaphonefixteam6300]

JC AIXUN T420D dual channel intelligent welding station with double soldering handle seat supports T245 T210 T115 soldering handle and iron tips. AIXUN T420D soldering station dual handles 2 channels can work simultaneously.

[@Tirkan]

Can use hot tweezers?

[@tze-ven]

Why would a doctor with stethoscope mess with electronics micro-soldering?

[@tokin420nchokin]

Stethoscope idk, lab coat is fine though.

[@ioanAbraham]

Hi there 😂 based off your review about Aixun T420d. I ordered this soldering station with all 3 handle C245 C210 C115 . But not arrived yet. 😢 . D. . Benjamin thank you so much for soldering station presentation. you are so far a best technician who have repair skills. You are professionals. With so much experience in this domain❤. A lot of respect!

[@Jbkwoohooyeeha]

Jbc does all the r&d and creates the design and China copies and sells it for half the price. No one questions it. Yeah.

[@clifffff7630]

To be fair, a soldering iron is slightly less complex than a miniature thermonuclear explosive device so I don't think JBC's research has been that groundbreaking to forever transform the future of humanity. And perhaps if JBC didn't have its soldering stations manufactured in China for a dozen dollars a piece and subsequently didn't sell them at exorbitant prices to consumers in the West, we wouldn't be here now. Don't blame China. Blame shareholder greed and shortsightedness.

[@Tirkan]

Was kostet?

[@tonylundberg4839]

So the solder station costs 150 euro more today?? 😳

[@gsmadem9351]

I love u man and i wish a fast progress for your channel.another advice good for your videos.put a back round music for minimazing echo and other noisy sounds.....you are a master....

[@techcreatetamil9149]

Quick 861dw unbox video uploaded bro

[@millionairedieselgarage4767]

man in a carhartt

[@HungNguyen-jx8jn]

do you want to sell jbc soldering station?

[@RESQREPAIR]

No, why I shouldn’t do this? We have 5 pieces of them Nane-2C and need them for our tables.

[@geba9452]

Clue or Glue???? hehe

[@elfolie]

It’s very good 👍 I have the same

[@hbmobile3985]

(Please microscope name) Please microscope name,

[@mansoormansoor6424]

Love from india 😍😍😘

[@laszlomadar8947]

I have this expensive 💩 soldering station witch work 2 month and then t210 tip just stop work and aixun don’t want to change it. Send them lot of videos and no reaction

[@mobailproblamfixermobsacar6067]

Dr. Ben Gift me your JBC old soldiering station Bcoz old is gold 🍫👌

[@tahiriqbal6367]

Super

[@jlev505]

Nice review. It’s just hard to take you serious with a “man bun”. 😉

[@jeedo2013]

The JBC is the best in the world all time ..

[@RESQREPAIR]

Im totally fine with that. But the AIXUN is great, too.

[@jeedo2013]

@@RESQREPAIR Have a good time with it brother so i need ask you about jbc nano tip number.. what is it ? I need slim ont digonal .. thank you

[@hbmobile3985]

Please microscope name

[@techcreatetamil9149]

Quick 861dw unbox video uploaded bro

[@hbmobile3985]

Please microscope name

[@hbmobile3985]

Please microscope name